Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 15.9 mm; Maximum DC Contact Current: .1 A;
Median Price
$2.830
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
TodayComponents
1+ parts
100+ parts
$2.730
1k+ parts
-
10k+ parts
AZTECH Wire
$5.560
$5.340
$5.230
$5.130
Snap Action & Limit Switches V-15G2-1E5-K attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
V-15G2-1E5-K Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
General Instrument
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Good-ark Electronics
Littelfuse
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Surge Components
Zetex Plc
D2FS-F-N-A1
Omron
SNAP ACTING/LIMIT SWITCH;
D4C-1524
Omron D4C-1524 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP67 sealing, it has a max operating force of 5.69N and operates at temperatures ranging from -10°C to 70°C. Ideal for panel mounting applications requiring momentary switch action with a roller lever actuator.
914CE31-3
Honeywell Sensing And Control
The Honeywell Sensing And Control 914CE31-3 is a SPDT snap action/limit switch with 16" body width, 44mm height, and steel roller actuator. It has a max AC contact current of 5A@250VAC and operating force of 22.24N. Ideal for panel mounting applications requiring momentary switch action with wire termination.
BZ-RW8435-A2
Honeywell Sensing And Control's BZ-RW8435-A2 is a SPDT snap action/limit switch with 10A@480VAC AC contact current rating. With a body width of 17.45 inch, it features a max operating force of 0.07 N and actuator travel of 12.32 mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
F82A-B120
The Cherry
The Cherry F82A-B120 is a SNAP ACTING/LIMIT SWITCH with DPST switch function. It features THERMOPLASTIC housing, BRASS terminals, and SILVER plating. Ideal for applications requiring 16A@250VAC AC contact current, -25 to 85 °C operating temperature range, and 7.874mm actuator travel.
SS-5GL13T
Omron SS-5GL13T is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25 to 85°C temperatures. With a max AC contact current of 5A@125VAC, it is ideal for panel mounting applications requiring momentary switch action.
111SM1-T
111SM1-T by Honeywell is a snap action/limit switch with SPDT function. It features a steel leaf type actuator with 6.3mm travel and corrosion-proof sealing. Ideal for applications requiring momentary switch action, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@28VDC.
ESE11MH1T
The Panasonic ESE11MH1T is a SPST snap action/limit switch with 6.1" body width and 4.25mm height, featuring a lever actuator type. It operates at 0.35N max force with momentary switch action, ideal for surface mount-right angle applications requiring solder termination.
SS-01GL13-FD
Omron's SS-01GL13-FD is a snap action/limit switch with a simulated roller lever actuator. It has an electrical life of 200,000 cycles and can withstand temperatures ranging from -25 to 85 °C. With a max AC contact voltage of 125V and DC contact current of 0.1A, it is suitable for various applications requiring precise momentary switching.
11SM1077-T
11SM1077-T by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 0.1A@125VAC and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with an actuator travel of 0.63mm.
DC1CA1RB
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER TYPE; Maximum Pre Travel: 4.5 mm; DC Maximum Rating R Load (Contact): 1A@48VDC;
ADPFF3J04AY
Itt Cannon
ITT Cannon's ADPFF3J04AY is a DPST snap action/limit switch with 75000 cycles electrical life. With a body width of 16.3mm and height of 28.4mm, it operates b/w -55°C to 85°C. Ideal for applications requiring momentary switch action and quick connect termination, it has a max AC contact current of 25A@250VAC.
21CX14
21CX14 by Honeywell Sensing And Control is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING and EXPLOSION PROOF sealing. It has a max AC contact current of 15A@480VAC and DC contact voltage of 0.5A@125VDC, making it suitable for PANEL MOUNT applications requiring MOMENTARY switch action.
9007AO1A
Schneider Electric Sa
V7-7B19D8-263
V7-7B19D8-263 by Honeywell is a snap action/limit switch with SPDT function, 100000 cycles electrical life, and 10.16" body width. It is made of polyester and features steel lever actuator with 4.53mm travel. Ideal for applications requiring momentary switch action in temperatures ranging from -40 to 82°C.
BZV6-RNX1
BZV6-RNX1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 4A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a steel plunger actuator, it has an actuator travel of 6.76mm and max operating force of 5.56N. Ideal for panel mount-threaded applications requiring momentary switch action.
WZ-R
WZ-R by Honeywell Sensing And Control is a SPST snap action/limit switch with 15A@250VAC AC max rating. It features a body width of 17.45 inch, body height of 21.34 mm, and actuator travel of 0.44 mm. Ideal for applications requiring momentary switch action and through hole-straight mounting feature.
D4C-1620
Omron D4C-1620 is a snap action/limit switch with SPDT function, IP67 sealing, and 200000 cycle electrical life. It features roller lever actuator type, 5A@250VAC AC max rating, and -10 to 70°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
MS27240-4
Otto Engineering
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 4PDT; Type (Actuator): ROLLER PLUNGER; Minimum Operating Temperature: -55 Cel; Electrical Life: 25000 Cycle(s);
BZE6-2RQ2
BZE6-2RQ2 by Honeywell Sensing And Control is a snap action/limit switch with a body width of 25.4 inch and sealing rating of IP40. It has a max AC contact current of 15 A and is commonly used for panel mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V-15G4-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Manufacturer Series: V; Electrical Life: 100000 Cycle(s);
V-15G1-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 8 V; AC Maximum Rating R Load (Contact): 15A@250VAC;
V-15G2-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Switch Action: MOMENTARY; Body Width: 10.3 inch;
V-15G-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Maximum Operating Temperature: 80 Cel;
V-15G2-1A5-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Sealing: IP40; Maximum DC Contact Voltage: 8 V;
V-15G-1A5-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Sealing: IP40; Maximum Pre Travel: 1.2 mm;
V-15G2-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Maximum AC Contact Current: 15 A; Maximum Operating Force: 1.96 N;
V-15G1-1A5-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum AC Contact Current: 15 A; Body Height: 15.9 mm;
V-15G1-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Manufacturer Series: V; Maximum Operating Force: 1.96 N;
V-15G-1C25-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; DC Maximum Rating R Load (Contact): 15A@8VDC; Termination Type: QUICK CONNECT;
V-15G-1C5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Temperature: 80 Cel; Maximum Pre Travel: 1.2 mm;
V-15G2-1A5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Minimum Operating Temperature: -25 Cel; Body Height: 15.9 mm;
V-15G-1A5-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Body Length/Diameter: 27.8 mm; Maximum Operating Temperature: 150 Cel;
V-15G2-1A5-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; AC Maximum Rating R Load (Contact): 15A@250VAC; Actuator Travel (mm): 5.6;
V-15G1-1C24-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Termination Type: QUICK CONNECT; Maximum Operating Temperature: 80 Cel;
V-15G-1C6-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: 3.92 N; Maximum AC Contact Current: 15 A;
V-15G-1B5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 100000 Cycle(s); Maximum Operating Force: 1.96 N;
V-15G1-1A5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 8 V; Maximum DC Contact Current: 15 A;
V-15G1-1A5-T-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Maximum DC Contact Voltage: 8 V; Maximum Pre Travel: 1.5 mm;
V-15G-1A5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): 15A@8VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved