Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
21SX39-T2
Honeywell Sensing And Control
21SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 7A@250VAC and DC contact current of 7A@28VDC, suitable for panel mounting applications. With a compact body width of 5.08", it offers precise actuation with an actuator travel of 0.6mm and max operating force of 1.39N.
.6
PLASTIC PLUNGER
5.08 inch
8.89 mm
12.7 mm
7A@250VAC
7 A
7A@28VDC
250 V
28 V
e4
PANEL MOUNT
1.39 N
85 Cel
.51 mm
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
GOLD
WIRE
23SX39-T2
23SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 5.08" and max operating temperature of 204°C, suitable for panel mounting applications requiring momentary switch action with 1A@30VDC DC max rating.
.61
1 A
1A@30VDC
30 V
204 Cel
413SX21-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Switch Action: MOMENTARY; Body Height: 8.89 mm;
PLUNGER
602EN1-6
The Honeywell Sensing And Control 602EN1-6 is a corrosion-proof DPDT snap action/limit switch with a plunger actuator. It has a max DC contact voltage of 28V and can handle up to 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action.
4.2
25.4 mm
PANEL MOUNT-THREADED
53.38 N
1.02 mm
CORROSION PROOF
DPDT
604EN1-6
The Honeywell 604EN1-6 is a corrosion-proof snap action/limit switch with 4PDT function, ideal for panel mounting. Featuring a plunger actuator with 4.2mm travel and 53.38N operating force, it has a max contact voltage of 28VDC and current rating of 7A@28VDC, making it suitable for various industrial applications.
30.48 mm
4PDT
622EN1-6
Honeywell Sensing And Control's 622EN1-6 is a corrosion-proof DPDT snap acting/limit switch with steel roller actuator. It has a max operating force of 53.38N, DC contact current of 7A@28VDC, and operates at a max temperature of 85°C. Ideal for panel mount-threaded applications requiring momentary switch action.
4.19
STEEL ROLLER
17.48 mm
624EN1-6
The Honeywell Sensing And Control 624EN1-6 is a corrosion-proof snap action/limit switch with 4PDT function, suitable for panel mount-threaded applications. It features a roller type actuator with 4.2mm travel and can handle up to 7A@28VDC current load, providing reliable performance in various industrial settings.
ROLLER TYPE
91SX39-T2
91SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 3.96" body width and 8.89mm height. It has a max AC contact current of 7A@115VAC, suitable for panel mounting applications requiring momentary switch action with plunger actuator type.
3.96 inch
7A@115VAC
115 V
91SX39-T
The Honeywell 91SX39-T snap action switch features SPDT function, 7A max AC/DC current, and 0.61mm actuator travel. Ideal for panel mounting applications requiring momentary switch action with a plunger actuator type.
93SX39-T
93SX39-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 3.96" and max DC contact voltage of 28V, suitable for panel mount applications requiring momentary switch action and 1A@28VDC max rating.
1A@28VDC
V15H16-CZ100A03-K
V15H16-CZ100A03-K by Honeywell is a SPDT snap action/limit switch with 10.3" width, 15.9mm height, and 16A@250VAC AC contact current. It has a 9mm actuator travel and 0.29N max operating force, suitable for panel mount applications requiring momentary switch action.
9
10.3 inch
15.9 mm
28.8 mm
16A@250VAC
16 A
.29 N
6.4 mm
QUICK CONNECT
11SM1
11SM1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.64mm and max operating force of 1.39N.
.64
6.35 inch
9.04 mm
19.84 mm
5A@250VAC
5 A
5A@30VDC
SCREW
3AC6
3AC6 by Honeywell Sensing And Control is a SPDT snap action/limit switch with PLUNGER actuator. It has a max AC contact current of 15.1A@250VAC and DC contact current of 0.5A@125VDC. Ideal for panel mount-threaded applications requiring momentary switch action in industrial settings.
6.35
12.7 inch
40.49 mm
45.97 mm
15.1A@250VAC
15.1 A
.5 A
.5A@125VDC
125 V
BZLN-LH
BZLN-LH by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a steel plunger actuator, it has a body width of 25.4 inch and height of 42.42 mm, suitable for panel mounting applications requiring momentary switch action.
5.92
STEEL PLUNGER
25.4 inch
42.42 mm
103.12 mm
15A@480VAC
15 A
480 V
22.24 N
.76 mm
DTE6-2RN
DTE6-2RN by Honeywell is a DPDT snap action/limit switch with zinc die cast housing. It has a max AC contact current of 10A@250VAC and operates b/w -32 to 71 °C. Ideal for panel mount-threaded applications, it offers a plunger actuator with 5.97mm travel distance.
1.062 inch
5.97
44.45 mm
77.22 mm
10A@250VAC
10 A
.3 A
.3A@125VDC
SNAP ACTION
ZINC DIE CAST
16.4 N
71 Cel
-32 Cel
2.79 mm
IP54
102HS1
102HS1 by Honeywell Sensing And Control is a hermetically sealed snap action/limit switch with a body width of 17.45 inch and a max operating temperature of 149 °C. It has a SPDT switch function and is commonly used for panel mounting applications.
1.9
LEVER
17.45 inch
28.7 mm
49.78 mm
1A@125VAC
6.12 N
149 Cel
-54 Cel
1.65 mm
HERMETICALLY SEALED
111SM1-H58
111SM1-H58 by Honeywell is a snap action/limit switch with SPDT function. It features a body width of 6.35in, corrosion-proof sealing, and steel leaf type actuator. Ideal for panel mounting applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
6.3
STEEL LEAF TYPE
1.95 N
5.54 mm
111SM115-H2
111SM115-H2 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A, making it suitable for applications requiring momentary switch action in various industries.
4.14
THROUGH HOLE-STRAIGHT
3.97 N
121 Cel
3.81 mm
SOLDER
111SM119-H2
111SM119-H2 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with 6.35" body width and 9.04mm height. It has a max AC contact current of 5A@250VAC, suitable for applications requiring momentary switch action and through hole-straight mounting feature.
3.4 N
111SM124-H2
111SM124-H2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a steel lever actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC, suitable for applications requiring momentary switch action. With a body width of 6.35 inch and mounting feature THROUGH HOLE-STRAIGHT, it is ideal for industrial automation systems.
STEEL LEVER
3.82 N
111SM125-H2
111SM125-H2 by Honeywell is a SPDT snap action/limit switch with 10.16" width, 15.88mm height, and 4.14mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC, making it ideal for applications requiring momentary switch action in through-hole mounting setups.
10.16 inch
15.88 mm
28.83 mm
2.27 N
111SM602-H4
The Honeywell 111SM602-H4 is a SPDT snap action/limit switch with a roller lever actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
6.32
ROLLER LEVER
5.56 mm
111SM858-H403
111SM858-H403 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with 10.16" body width and corrosion proof sealing. It has a max AC contact current of 5A@250VAC, suitable for applications requiring momentary switch action and lever actuator type.
11SM1-H2
11SM1-H2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and max AC contact current of 5A@250VAC. Its spherical plastic plunger actuator has an actuator travel of 0.64mm, making it ideal for applications requiring momentary switch action in through hole-straight mounting setups.
SPHERICAL PLASTIC PLUNGER
11SM1077-T
11SM1077-T by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 0.1A@125VAC and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with an actuator travel of 0.63mm.
.63
.1A@125VAC
.1 A
.1A@30VDC
.5 mm
11SM144
11SM144 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.83N.
.83 N
11SM244-T
11SM244-T by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 9.04mm height, and 0.63mm actuator travel. It has a max operating temperature of 204°C and can handle up to 5A@250VAC or 0.3A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
11SM3-S
11SM3-S by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers 0.63mm actuator travel and 0.97N max operating force.
27.61 mm
21.61 mm
.97 N
11SM3-T
11SM3-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A@250VAC, making it suitable for panel mounting applications requiring momentary switch action. The switch features a spherical plastic plunger actuator with an actuator travel of 0.64mm and termination type wire connection.
0 Cel
11SM3
11SM3 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 5A@250VAC AC rating. Featuring a plastic plunger, it has 0.63mm actuator travel and 1.39N max operating force. Ideal for panel mounting applications requiring momentary switch action.
11SM401-T
11SM401-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
11SM423-H4
11SM423-H4 by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 1A@125VAC and DC contact current of 1A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.97N.
19.83 mm
11SM703
11SM703 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 4A@250VAC and DC contact current of 4A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.54N.
4A@250VAC
4 A
4A@30VDC
.54 N
11SM712-H58
11SM712-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with wire termination.
.56 N
11SM7601-H4
11SM7601-H4 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 4A@250VAC and a DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers a body width of 6.35 inch and an actuator travel of 0.64 mm.
.55 N
122SM44-T2
122SM44-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 1A@125VAC AC max rating. Featuring a roller type actuator, it has a body width of 6.35 inch and is suitable for panel mounting applications requiring momentary switch action.
12SX31-T
12SX31-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 5.08" and max operating temperature of 121°C, making it suitable for panel mounting applications requiring momentary switch action with AC contact current up to 1A@125VAC or DC contact current up to 1A@30VDC.
13AC1
13AC1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15.1A@250VAC AC max rating, suitable for panel mount applications. Featuring a 9.14mm actuator travel and 17.79N max operating force, it offers reliable performance in various industrial settings.
9.14
ROD TYPE
40.44 mm
17.79 N
13SX21-T
13SX21-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 1A@125VAC and DC contact current of 1A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.6mm and operates at temperatures up to 85°C.
1DM301
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Body Length/Diameter: 31.75 mm; Maximum AC Contact Voltage: 277 V;
15.9
17.27 inch
24.64 mm
31.75 mm
10A@277VAC
277 V
4.17 N
1DP5
1DP5 by Honeywell is a SPST snap action/limit switch with 14A@250VAC AC max rating. Featuring a plunger actuator type, it has an actuator travel of 9.53mm and max operating force of 4.45N. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
9.53
14A@250VAC
14 A
4.45 N
SPST
1SE3
1SE3 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPST switch function. Featuring a steel plunger actuator, it has a max AC contact current of 5A@250VAC and corrosion-proof sealing. Ideal for panel mounting applications, it offers momentary switch action with an actuator travel of 1.35mm.
1.35
8.79 inch
15.24 mm
22.25 mm
4.73 N
1.27 mm
1XE202
1XE202 by Honeywell is a snap action/limit switch with SPST function, steel plunger actuator, and corrosion-proof sealing. It has a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC. Ideal for panel mounting applications requiring a durable switch with momentary action.
1.37
8.03 inch
15.64 mm
21SX1-T
21SX1-T by Honeywell is a SPDT snap action/limit switch with 5.08" width, 8.89mm height, and 0.6mm actuator travel. It has a max operating temperature of 121°C and can handle up to 7A@250VAC or 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action with gold terminal finish.
Gold (Au)
22SM22-T
22SM22-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC, suitable for panel mounting applications. With a body width of 6.35 inch and height of 9.04 mm, it offers precise actuator travel of 0.63 mm and max operating force of 1.39 N at temperatures up to 121°C.
2DM4
The Honeywell Sensing And Control 2DM4 is a DPDT snap action/limit switch with 10A@277VAC AC contact current rating. Featuring a plastic plunger actuator, it has an actuator travel of 8.46mm and max operating force of 6.67N. Ideal for panel mounting applications requiring momentary switch action.
8.46
26.16 mm
39.88 mm
6.67 N
2SX1-T
2SX1-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 7A@250VAC and DC contact current of 7A@28VDC. Ideal for panel mounting applications, it offers quick connect termination and 0.6mm actuator travel.
311SM1-T
311SM1-T by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features PHENOLIC housing material, SILVER end contact plating, and operates b/w -55 to 121 °C. Ideal for applications requiring a max AC contact current of 5A@250VAC, such as panel mounting setups.
.29 inch
2.67
STRAIGHT TYPE
SILVER
PHENOLIC
.39 N
.34 inch
-55 Cel
2.16 mm
.093 inch
© 2023 All rights reserved
