Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
11SM1-H2
Honeywell Sensing And Control
11SM1-H2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and max AC contact current of 5A@250VAC. Its spherical plastic plunger actuator has an actuator travel of 0.64mm, making it ideal for applications requiring momentary switch action in through hole-straight mounting setups.
.64
SPHERICAL PLASTIC PLUNGER
6.35 inch
9.04 mm
19.84 mm
5A@250VAC
5 A
5A@30VDC
250 V
30 V
THROUGH HOLE-STRAIGHT
1.39 N
.51 mm
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SOLDER
11SM1077-T
11SM1077-T by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 0.1A@125VAC and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with an actuator travel of 0.63mm.
.63
PLASTIC PLUNGER
.1A@125VAC
.1 A
.1A@30VDC
125 V
PANEL MOUNT
.5 mm
SCREW
11SM144
11SM144 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.83N.
10.16 inch
15.88 mm
28.83 mm
.83 N
11SM244-T
11SM244-T by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 9.04mm height, and 0.63mm actuator travel. It has a max operating temperature of 204°C and can handle up to 5A@250VAC or 0.3A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
.3 A
.3A@125VDC
204 Cel
11SM3-S
11SM3-S by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers 0.63mm actuator travel and 0.97N max operating force.
27.61 mm
21.61 mm
.97 N
11SM3-T
11SM3-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a body width of 6.35in and max operating temperature of 121°C. It has a max AC contact current of 5A@250VAC, making it suitable for panel mounting applications requiring momentary switch action. The switch features a spherical plastic plunger actuator with an actuator travel of 0.64mm and termination type wire connection.
121 Cel
0 Cel
WIRE
11SM3
11SM3 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 5A@250VAC AC rating. Featuring a plastic plunger, it has 0.63mm actuator travel and 1.39N max operating force. Ideal for panel mounting applications requiring momentary switch action.
11SM401-T
11SM401-T by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
QUICK CONNECT
11SM423-H4
11SM423-H4 by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 1A@125VAC and DC contact current of 1A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.97N.
19.83 mm
1A@125VAC
1 A
1A@30VDC
11SM703
11SM703 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 4A@250VAC and DC contact current of 4A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.54N.
4A@250VAC
4 A
4A@30VDC
.54 N
11SM712-H58
11SM712-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.63mm actuator travel. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with wire termination.
.56 N
11SM7601-H4
11SM7601-H4 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 4A@250VAC and a DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers a body width of 6.35 inch and an actuator travel of 0.64 mm.
.55 N
122SM44-T2
122SM44-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 1A@125VAC AC max rating. Featuring a roller type actuator, it has a body width of 6.35 inch and is suitable for panel mounting applications requiring momentary switch action.
6.32
ROLLER TYPE
1.95 N
5.56 mm
12SX31-T
12SX31-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 5.08" and max operating temperature of 121°C, making it suitable for panel mounting applications requiring momentary switch action with AC contact current up to 1A@125VAC or DC contact current up to 1A@30VDC.
.6
5.08 inch
8.89 mm
12.7 mm
13AC1
13AC1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15.1A@250VAC AC max rating, suitable for panel mount applications. Featuring a 9.14mm actuator travel and 17.79N max operating force, it offers reliable performance in various industrial settings.
9.14
ROD TYPE
12.7 inch
40.44 mm
45.97 mm
15.1A@250VAC
15.1 A
.5 A
.5A@125VDC
17.79 N
13SX21-T
13SX21-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 1A@125VAC and DC contact current of 1A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.6mm and operates at temperatures up to 85°C.
85 Cel
1DM301
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLASTIC PLUNGER; Body Length/Diameter: 31.75 mm; Maximum AC Contact Voltage: 277 V;
15.9
17.27 inch
24.64 mm
31.75 mm
10A@277VAC
10 A
277 V
4.17 N
21SX1-T
21SX1-T by Honeywell is a SPDT snap action/limit switch with 5.08" width, 8.89mm height, and 0.6mm actuator travel. It has a max operating temperature of 121°C and can handle up to 7A@250VAC or 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action with gold terminal finish.
7A@250VAC
7 A
7A@28VDC
28 V
e4
Gold (Au)
22SM22-T
22SM22-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC, suitable for panel mounting applications. With a body width of 6.35 inch and height of 9.04 mm, it offers precise actuator travel of 0.63 mm and max operating force of 1.39 N at temperatures up to 121°C.
2SX1-T
2SX1-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 7A@250VAC and DC contact current of 7A@28VDC. Ideal for panel mounting applications, it offers quick connect termination and 0.6mm actuator travel.
311SM1-T
311SM1-T by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features PHENOLIC housing material, SILVER end contact plating, and operates b/w -55 to 121 °C. Ideal for applications requiring a max AC contact current of 5A@250VAC, such as panel mounting setups.
.29 inch
2.67
STRAIGHT TYPE
SILVER
SNAP ACTION
PHENOLIC
.39 N
.34 inch
-55 Cel
2.16 mm
.093 inch
311SM2-H58
311SM2-H58 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 19.84mm length/diameter. It operates b/w 0-121°C, handles up to 5A@250VAC or 5A@30VDC, and has a max force of 0.3N. Ideal for panel mounting applications requiring momentary switch action with wire termination.
3.71
.3 N
3.05 mm
311SM3-H58
311SM3-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 19.84mm length/diameter. It has a max operating temperature of 121°C and can handle up to 5A@250VAC or 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with solder termination type.
9.32
.15 N
7.87 mm
311SM3-T
311SM3-T by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features PHENOLIC housing material, SILVER plating, and operates b/w -55 to 121 °C. Ideal for PANEL MOUNT applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
1.77 inch
LEVER
.283 inch
311SM4
311SM4 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT function. It features a body width of 6.35in, max operating temperature of 121°C, and max AC contact current of 5A. Ideal for panel mounting applications requiring momentary switch action with simulated roller lever actuator.
2.62
SIMULATED ROLLER LEVER
311SM6-T
311SM6-T by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features a ROLLER LEVER actuator type and PHENOLIC housing material. With SILVER plating, it has a max AC contact current of 5A@250VAC. Ideal for panel mounting applications with operating temperatures ranging from -55 to 121 °C.
.25 inch
ROLLER LEVER
19.34 mm
.56 inch
311SM68-T
The Honeywell Sensing And Control 311SM68-T is a SPDT snap action/limit switch with roller lever actuator. It has a max AC contact current of 1A@125VAC and DC contact voltage of 30V. Ideal for panel mounting applications, offering momentary switch action with a compact body size of 19.84mm x 6.35mm x 9.04mm.
311SM702-T
The Honeywell 311SM702-T is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 19.84mm length/diameter. It has a max operating temperature of 121°C, AC contact current of 4A, and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with termination via wire connection.
.11 N
311SX1-T
311SX1-T by Honeywell is a SPDT snap action/limit switch with 5A@250VAC AC contact rating. Featuring a straight type actuator with 2.01mm travel, it has a max operating force of 0.49N and termination via wire. Ideal for panel mounting applications requiring momentary switch action.
2.01
14.73 mm
5A@28VDC
.49 N
1.65 mm
311SX3-T
The Honeywell Sensing And Control 311SX3-T is a SPDT snap action/limit switch with a body width of 5.08in and height of 8.89mm. It has a max operating temperature of 121°C, AC contact current of 5A, and DC contact voltage of 28V. Ideal for panel mounting applications requiring momentary switch action with gold terminal finish for reliable performance.
5.31
.2 N
4.7 mm
311SX4-H391
311SX4-H391 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC AC rating. It has a body width of 5.08" and max operating temperature of 121°C. Ideal for applications requiring momentary switch action, it features through hole-right angle mounting and solder termination type.
1.52
THROUGH HOLE-RIGHT ANGLE
.58 N
1.27 mm
311SX4-H58
The Honeywell 311SX4-H58 is a SPDT snap action/limit switch with simulated roller lever actuator. It has a max operating temperature of 121°C, AC contact current of 5A@250VAC, and DC contact voltage of 28V. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
313SX2-T
The Honeywell 313SX2-T is a SPDT snap action/limit switch with 1A@125VAC and 1A@30VDC contact ratings. With a body width of 5.08in, it has an actuator travel of 3.56mm and max operating force of 0.31N. Ideal for panel mounting applications requiring momentary switch action.
3.56
.31 N
2.92 mm
313SX30-T
313SX30-T by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features a ROLLER LEVER actuator type and CORROSION PROOF sealing, suitable for PANEL MOUNT applications. With a max operating temperature of 121°C, it can handle up to 1A@125VAC AC contact current and 1A@30VDC DC contact current.
.68 N
CORROSION PROOF
313SX5-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Maximum DC Contact Current: 1 A; Maximum AC Contact Current: 1 A; Body Height: 8.89 mm;
3.23
2.67 mm
412SX21-T
The Honeywell Sensing And Control 412SX21-T is a SPDT snap action/limit switch with a body width of 5.08in and max operating temperature of 204°C. It features a spherical plastic plunger actuator, suitable for panel mounting applications requiring momentary switch action with 1A@125VAC AC contact rating.
412SX22-T
The Honeywell Sensing And Control 412SX22-T is a SPDT snap action/limit switch with 1A@125VAC AC and 1A@28VDC DC max ratings. Featuring a plastic plunger actuator, it has a 0.6mm actuator travel and 1.39N max operating force. Ideal for panel mounting applications requiring momentary switch action.
1A@28VDC
41SM28-H2
41SM28-H2 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.89mm actuator travel. It has a max AC contact current of 11A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with plastic plunger actuator type.
.89
11A@250VAC
11 A
.76 mm
4SX37-H58
4SX37-H58 by Honeywell is a SPDT snap action/limit switch with 5.08" width, 8.89mm height, and 0.75mm actuator travel. It has a max operating temperature of 204°C and can handle up to 7A@250VAC. Ideal for panel mounting applications requiring momentary switch action with plastic plunger actuator.
.75
5SE1-T
5SE1-T by Honeywell is a snap action/limit switch with SPDT function. It features a steel plunger actuator, corrosion-proof sealing, and 8.79" body width. Ideal for panel mounting applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
1.35
STEEL PLUNGER
8.79 inch
13.46 mm
22.25 mm
4.73 N
5XE1-T
5XE1-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with 8.03" body width, 17.65mm height, and 1.37mm actuator travel. It features corrosion-proof sealing, epoxy terminal seal, and a spherical steel plunger type actuator. Ideal for applications requiring momentary switch action and panel mounting with a max DC contact voltage of 28V and current rating of 7A@28VDC.
1.37
SPHERICAL STEEL PLUNGER
8.03 inch
17.65 mm
15.65 mm
CORROSION PROOF; EPOXY TERMINAL SEALED
7SE1
7SE1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a steel plunger actuator, corrosion-proof sealing, and max AC contact current of 5A@250VAC. Ideal for panel mounting applications requiring momentary switch action with a body width of 8.788", height of 15.24mm, and length/diameter of 22.26mm.
8.788 inch
15.24 mm
22.26 mm
5A@250VDC
2.22 N
914CE22-6
The Honeywell Sensing And Control 914CE22-6 is a SPDT snap action/limit switch with 16" body width and 60.8mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mounting applications requiring momentary switch action with 4.8mm actuator travel.
4.8
16 inch
60.8 mm
40 mm
8.89 N
1.8 mm
9HM30-REL-PGM
9HM30-REL-PGM by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and hermetically sealed for corrosion protection. It has an actuator travel of 0.84mm, max DC contact voltage of 28V, and max operating force of 1.95N. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
.84
SPHERICAL WOBBLEFRAM TYPE
12.19 mm
20.04 mm
.5A@28VDC
e3
CORROSION PROOF; HERMETICALLY SEALED
TIN
BA-2R708-P7
Honeywell Sensing And Control's BA-2R708-P7 is a 17.45" snap action switch with SPDT function, ideal for panel mounting applications. It offers 20A@480VAC AC contact rating and 0.5A@125VDC DC contact rating, with a max operating force of 6.12N. The switch features a PIN PLUNGER actuator type and MOMENTARY switch action.
PIN PLUNGER
17.45 inch
21.34 mm
49.28 mm
20A@480VAC
20 A
480 V
6.12 N
BZ-2R-A2
BZ-2R-A2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@125VAC AC max rating. With 0.51mm actuator travel and 3.61N max operating force, it is ideal for panel mount applications requiring momentary switch action. This switch features SCREW termination type and 0.5A@125VDC DC max rating.
.51
17.44 inch
24.13 mm
15A@125VAC
15 A
3.61 N
.38 mm
BZ-2RDS-A2-S
BZ-2RDS-A2-S by Honeywell Sensing And Control is a 17.45" snap action switch with SPDT function, steel plunger actuator, and 15A@250VAC AC contact rating. It is corrosion-proof and splash-proof, suitable for panel mount-threaded applications requiring momentary switch action at up to 480VDC or 250VAC.
1.57
23.5 mm
15A@250VAC
15A@480VDC
PANEL MOUNT-THREADED
5.28 N
CORROSION PROOF; SPLASH PROOF
BZ-2RD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL PLUNGER; Switch Action: MOMENTARY; Maximum AC Contact Current: 15 A;
1.9
20.7 mm
15A@480VAC
© 2023 All rights reserved
