Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
16CX2
Honeywell Sensing And Control
16CX2 by Honeywell is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. Featuring EPOXY TERMINAL SEALING and EXPLOSION PROOF sealing, it has a max AC contact current of 1A@125VAC. Ideal for PANEL MOUNT applications, it operates at a max temperature of 85°C.
O.F. = 1.25 NM, P.T. = 30 DEG, T.T. = 105 DEG
101.6 inch
104 mm
101.6 mm
1A@125VAC
1 A
125 V
16CX
PANEL MOUNT
85 Cel
EPOXY TERMINAL SEALED; EXPLOSION PROOF
MOMENTARY
SPDT
SNAP ACTING/LIMIT SWITCH
SCREW
1LS2
1LS2 by Honeywell is a Snap Action & Limit Switch with SPDT switch function. It features a steel shaft plunger actuator and corrosion-proof sealing. With max AC contact current of 10A@480VAC, it is ideal for panel mounting applications requiring momentary switch action.
STEEL SHAFT PLUNGER
O.F. = 0.51 NM, P.T. =20 DEG, T.T. = 50 DEG
39.88 inch
40.64 mm
68.58 mm
10A@480VAC
10 A
.8 A
.8A@115VDC
480 V
115 V
CORROSION PROOF
1LS3
1LS3 by Honeywell Sensing And Control is a DPDT snap action/limit switch with adjustable roller lever actuator. It has a max AC contact current of 10A@480VAC and DC contact current of 0.8A@115VDC. Ideal for panel mounting applications requiring momentary switch action.
ADJUSTABLE ROLLER LEVER
O.F. = 0.51 NM, P.T. = 20 DEG, T.T. = 50 DEG
.51 N
DPDT
5LS1-L
5LS1-L by Honeywell is a snap action/limit switch with DPDT function, steel roller plunger actuator, and corrosion-proof sealing. It has a max AC contact current of 10A@480VAC and DC contact current of 0.8A@125VDC. Ideal for panel mounting applications requiring momentary switch action with a max pre-travel of 1.65mm.
7.21
STEEL ROLLER PLUNGER
35.05 inch
39.88 mm
.8A@125VDC
31.14 N
1.65 mm
914CE18-3A
The Honeywell Sensing And Control 914CE18-3A is a SPDT snap action/limit switch with a steel plunger actuator. It has a max AC contact current of 5A@250VAC and an actuator travel of 4.8mm, suitable for panel mount applications requiring momentary switch action.
4.8
STEEL PLUNGER
16 inch
43.99 mm
40.01 mm
5A@250VAC
5 A
250 V
22.24 N
1.8 mm
WIRE
914CE18-9A
The Honeywell 914CE18-9A is a SPDT snap action/limit switch with a steel plunger actuator. It has a max AC contact current of 5A@250VAC and an operating force of 22.24N. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
914CE2-3A
The Honeywell Sensing And Control 914CE2-3A is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mounting applications requiring momentary switch action with steel roller actuator.
STEEL ROLLER
40 mm
12.01 N
914CE3-12
The Honeywell Sensing And Control 914CE3-12 is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has a body width of 16in and max operating force of 12.01N. Ideal for panel mounting applications requiring momentary switch action.
914CE3-3A
The Honeywell Sensing And Control 914CE3-3A is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, making it ideal for panel mounting applications requiring momentary switch action with steel roller actuator travel of 4.8mm.
914CE3-9
The Honeywell Sensing And Control 914CE3-9 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mounting applications requiring momentary switch action with roller type actuator.
ROLLER TYPE
BAF1-2RN-LH
Honeywell Sensing And Control's BAF1-2RN-LH is a 33.02" snap action/limit switch with SPDT function, 20A@480VAC AC rating, and 0.5A@125VDC DC rating. Featuring a steel plunger actuator with 7.95mm travel, it is ideal for panel mounting applications requiring momentary switch action.
7.95
33.02 inch
54.86 mm
20A@480VAC
20 A
.5 A
.5A@125VDC
11.12 N
2.39 mm
1172CX12
1172CX12 by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a max AC contact current of 1A@125VAC and sealing for EPOXY TERMINAL SEALED; EXPLOSION PROOF applications. This panel mount switch has dimensions of 101.6mm x 104mm x 101.6 inch, making it suitable for various industrial uses.
O.F. = 0.5 NM, P.T = 15 DEG; T.T. = 105 DEG
1172CX
914CE2-AGQ
914CE2-AGQ by Honeywell Sensing And Control is a SPDT snap action/limit switch with IRON ROLLER PLUNGER actuator. It has a max AC contact current of 1A@125VAC and operating temperature range of 0-70 °C. Ideal for panel mounting applications requiring momentary switch action with 4.8mm actuator travel.
IRON ROLLER PLUNGER
44 mm
914CE
11.8 N
70 Cel
0 Cel
3 mm
CONNECTOR
5LS1
5LS1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a steel roller plunger actuator, corrosion-proof sealing, and max AC contact current of 10A@480VAC. Ideal for panel mounting applications requiring momentary switch action with a max operating force of 31.14N.
8LS1-L
8LS1-L by Honeywell is a SPDT snap action/limit switch with PLUNGER actuator. It has a max AC contact current of 10A@480VAC and DC contact current of 0.8A@125VDC. Ideal for panel mounting applications, it offers momentary switch action with screw termination type.
PLUNGER
68.33 mm
1.39 N
V7-6B19D8
V7-6B19D8 by Honeywell is a SPDT snap action/limit switch with 10.16" width, 15.88mm height, and 2.21mm actuator travel. It has a max AC contact current of 11A and DC contact voltage of 125V, making it ideal for panel mounting applications requiring momentary switch action.
2.21
10.16 inch
15.88 mm
28.83 mm
11A@277VAC
11 A
277 V
3.89 N
1.19 mm
SOLDER
18CX10E
18CX10E by Honeywell Sensing And Control is a SPDT snap acting/limit switch with EPOXY TERMINAL SEALING and EXPLOSION PROOF feature. It has a max operating temperature of 85°C, DC contact voltage of 40V, and current rating of 0.02A@40VDC. Ideal for panel mounting applications requiring momentary switch action in hazardous environments.
O.F. = 0.50 NM, T.T. = 90 DEG
105.3 mm
.02 A
.02A@40VDC
40 V
2CPSA1A1B
2CPSA1A1B by Honeywell Sensing And Control is a SNAP ACTING/LIMIT SWITCH with IP67 sealing, 4PST switch function, and max AC contact current of 6A@120VAC. It has a body width of 66.73in and is ideal for PANEL MOUNT applications requiring momentary switch action in environments with temperatures ranging from -40°C to 85°C.
66.73 inch
152.4 mm
6A@120VAC
6 A
2.8 A
2.8A@24VDC
120 V
24 V
177.93 N
-40 Cel
IP67
4PST
41SM28-T2
41SM28-T2 by Honeywell is a SPDT snap action/limit switch with a body width of 6.35in and height of 9.04mm. It has a max operating temperature of 121°C, AC contact current of 11A, and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with solder termination.
.89
SPHERICAL PLASTIC PLUNGER
6.35 inch
9.04 mm
19.84 mm
11A@250VAC
5A@30VDC
30 V
121 Cel
.76 mm
V3-19
V3-19 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 10.16" body width, 15.88mm height, and 27.79mm length/diameter. It has a max AC contact current of 15.1A@250VAC and DC contact current of 0.5A@125VDC, suitable for panel mount applications requiring momentary switch action with plastic plunger actuator type.
PLASTIC PLUNGER
27.79 mm
15.1A@250VAC
15.1 A
41SM1-H251
41SM1-H251 by Honeywell is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 11A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers a body width of 6.35in and operates in temperatures ranging from -54°C to 121°C.
-54 Cel
BZ-2RW80-A2
BZ-2RW80-A2 by Honeywell is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has a PHENOLIC housing, SILVER plating, and operates b/w -55 to 85 °C. Ideal for applications requiring momentary switch action, it can handle up to 15A@480VAC AC current and 0.5A@125VDC DC current.
2.5 inch
5.56
STRAIGHT LEVER
17.45 inch
25.4 mm
49.28 mm
SILVER
0.13HP@125VAC
15A@480VAC
15 A
SNAP ACTION
PHENOLIC
.67 N
.75 inch
-55 Cel
BZ-2R
BZ-2R by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC and 0.5A@125VDC DC max ratings. With a body width of 17.45mm, it has a panel mount feature and screw termination type, making it ideal for applications requiring momentary switch action in industrial settings.
.51
QUICK CONNECT TERMINALS ALSO AVAILABLE
21.08 mm
3.61 N
.38 mm
BZ-R-A2
BZ-R-A2 by Honeywell is a SPDT snap action/limit switch with 16A@480VAC AC contact rating. It has a body width of 17.45 inch and max operating force of 2.5 N, suitable for panel mount applications requiring momentary switch action in industrial settings.
.43
24.13 mm
16A@480VAC
16 A
2.5 N
.3 mm
MT-4R-A28
The Honeywell Sensing And Control MT-4R-A28 is a SPDT snap action/limit switch with 1.14mm actuator travel and 5N max operating force. It has a max DC contact voltage of 125V and current rating of 10A, suitable for panel mount applications requiring momentary switch action.
1.14
22.35 mm
10A@125VDC
5 N
1.02 mm
MT-4RL-A28
Honeywell Sensing And Control's MT-4RL-A28 is a 17.45" snap action switch with SPDT function, steel leaf actuator, and corrosion-proof sealing. It has a max AC contact current of 10A@125VAC and DC contact current of 10A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
STEEL LEAF TYPE
10A@125VAC
3.34 N
V3-101
Honeywell V3-101 is a 10.16" snap action switch with SPDT function, suitable for panel mounting. It has a max AC contact current of 11A@277VAC and DC contact current of 0.5A@125VDC. Ideal for applications requiring momentary switch action and plastic plunger actuator with 2.21mm travel.
2.22 N
V7-7B17D8
V7-7B17D8 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 10.16" body width and 15.88mm height. It has a max AC contact current of 11A@277VAC, suitable for panel mount applications requiring momentary switch action with plastic plunger actuator type.
QUICK CONNECT
V3-1001
V3-1001 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 10A@125VAC and 10A@28VDC contact ratings. Featuring a plunger actuator, it has a body width of 10.16 inch and is ideal for panel mounting applications requiring momentary switch action.
15.87 mm
27.78 mm
10A@28VDC
28 V
V3-1002
V3-1002 by Honeywell Sensing And Control is a SPST snap action/limit switch with 10.16" width, 15.87mm height, and 27.78mm length/diameter. It has a plunger actuator type with 2.21mm travel and 1.19mm pre-travel, operating at a max force of 3.89N. Ideal for panel mounting applications requiring momentary switch action in various industries.
SPST
1SE401-3
1SE401-3 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with steel plunger actuator. It has a body width of 8.79in, sealing for corrosion proof and epoxy terminal sealed, and max DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with a max operating force of 4.73N.
1.35
8.79 inch
15.24 mm
22.25 mm
1A@30VDC
4.73 N
1.27 mm
CORROSION PROOF; EPOXY TERMINAL SEALED
D2F-FL3-D3
Omron
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Switch Action: MOMENTARY; DC Maximum Rating R Load (Contact): .5A@30VDC;
.5
SIMULATED ROLLER LEVER
5.8 inch
6.5 mm
12.8 mm
.5A@30VDC
30000 Cycle(s)
.74 N
65 Cel
-25 Cel
IP40
11SX21-T
11SX21-T by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features PHENOLIC housing, SILVER terminal material, and PLASTIC PLUNGER actuator type. Ideal for applications requiring momentary switch action, with max AC contact current of 5A@115VAC and operating temperature range from 121 to 204 °C.
.06 inch
.61
5.08 inch
8.89 mm
12.7 mm
5A@115VAC
5A@28VDC
.32 inch
204 Cel
.51 mm
.09 inch
313SX1-T
313SX1-T by Honeywell Sensing And Control is a SPDT snap acting/limit switch with gold plating, suitable for panel mounting. It has a max operating temperature of 121°C and can handle up to 1A@125VAC or 1A@28VDC. This lever-type switch with 0.49N max force is ideal for applications requiring precise momentary switching.
3.6 inch
2.01
LEVER
CE; CSA; CUL; ENEC; UL
5.1 inch
13.6 mm
14.7 mm
GOLD
1A@28VDC
.49 N
.332 inch
D4B-1111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Termination Type: SCREW; Body Height: 74 mm;
ROLLER LEVER
P.T.= 21 DEG, T.T.= 71 DEG
40 inch
74 mm
43 mm
10A@400VAC
10A@14VDC
400 V
14 V
500000 Cycle(s)
9.41 N
80 Cel
DPST
D4B-1115N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): STEEL ROLLER LEVER; Maximum AC Contact Current: 10 A; Body Length/Diameter: 43 mm;
STEEL ROLLER LEVER
D4B-1116N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; Switch Action: MOMENTARY; Sealing: IP67;
D4B-1117N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROD LEVER; Minimum Operating Temperature: -40 Cel; DC Maximum Rating R Load (Contact): 10A@14VDC;
ADJUSTABLE ROD LEVER
2.12 N
D4B-1170N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Maximum Operating Force: 18.63 N; Body Width: 40 inch;
7
TOP PLUNGER
18.63 N
2 mm
D4B-1171N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Body Height: 74 mm; Maximum AC Contact Current: 10 A;
TOP ROLLER PLUNGER
D4B-1187N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PLASTIC ROD; Body Length/Diameter: 43 mm; Switch Action: MOMENTARY;
PLASTIC ROD
P.T.= 15 DEG, T.T.=15 DEG
1.47 N
D4B-1511N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Sealing: IP67; Switch Action: MOMENTARY;
D4B-1570N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP PLUNGER; Termination Type: SCREW; DC Maximum Rating R Load (Contact): 10A@14VDC;
D4B-1571N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Minimum Operating Temperature: -40 Cel; Maximum Operating Force: 18.63 N;
D4B-1A11N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; Maximum Operating Temperature: 80 Cel;
D4B-1A16N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ADJUSTABLE ROLLER LEVER; DC Maximum Rating R Load (Contact): 10A@14VDC; Body Height: 74 mm;
D4B-1A71N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): TOP ROLLER PLUNGER; Actuator Travel (mm): 7; Sealing: IP67;
D4B-2111N
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): ROLLER LEVER; Body Height: 74 mm; Maximum AC Contact Current: 10 A;
© 2023 All rights reserved
