Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BZ-R-A2 by Honeywell is a SPDT snap action/limit switch with 16A@480VAC AC contact rating. It has a body width of 17.45 inch and max operating force of 2.5 N, suitable for panel mount applications requiring momentary switch action in industrial settings.
Median Price
$20.055
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Sager
1+ parts
$17.420
100+ parts
$14.150
1k+ parts
$13.980
10k+ parts
-
Mouser Electronics
$18.950
$13.810
$13.060
DigiKey
$13.063
TTI
$20.010
$12.720
$12.590
RS (Exports)
$20.100
RS Americas
$23.050
$16.370
Element14
$26.420
$18.870
Powell Electronics
$42.060
$37.850
$31.430
Farnell
$25.820
Master Electronics
$12.410
$12.280
Verical
$14.600
Chip1Stop
$20.500
Carlton-Bates
$15.880
IBS Electronics
$26.199
$16.718
$16.634
TME
$30.150
Q Components
Vyrian
Nova Conductors
Electronic Expediters
Resion
VNN
Ampacity Inc.
$14.030
Allen Electronics Distributors
$19.790
Metaverse IC Inc.
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Perfect Parts
Assy Fe
Wide body width allows for easy installation and provides stability to the switch.
SPDT (Single Pole, Double Throw) switch function offers versatility in switching options.
Compact body height makes the switch suitable for applications with limited space.
High maximum AC contact current rating allows for reliable electrical switching in various applications.
Precise actuator travel ensures accurate and consistent switching action.
Combines the responsiveness of a snap action switch with the precision of a limit switch, offering the best of both worlds.
High AC maximum rating ensures safe operation in high voltage applications.
Compact body length/diameter facilitates easy integration into different systems.
Low operating force requirement makes the switch easy to actuate, reducing operator fatigue.
Momentary switch action provides temporary electrical contact, ideal for applications requiring momentary switching.
Screw termination allows for easy and secure connection of electrical wires.
High maximum AC contact voltage rating ensures compatibility with a wide range of voltage levels.
Minimal pre-travel ensures immediate actuation upon reaching the desired activation point.
Panel mount feature allows for secure and convenient installation on panels or mounting surfaces.
Snap Action & Limit Switches BZ-R-A2 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
BZ-R-A2 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Microsemi
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SPC TECHNOLOGY/ MULTICOMP
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Leshan Radio
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
D4CC-3031
Omron
Omron's D4CC-3031 snap action & limit switch offers 200000 cycles, IP67 sealing, and SPDT switch function. With a body width of 16in and actuator travel of 4.8mm, it is ideal for applications requiring a sealed pin plunger type switch with momentary action and wire termination.
11TL604
C & K Components
11TL604 by C & K Components is a snap action/limit switch with SPDT switch function and stainless steel plunger actuator. It has an electrical life of 150,000 cycles, insulation resistance of 1G ohm, and can handle AC contact current up to 15A@250VAC. Ideal for panel mounting applications requiring reliable switching in temperatures ranging from -55°C to 150°C.
311SM4
Honeywell Sensing And Control
311SM4 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT function. It features a body width of 6.35in, max operating temperature of 121°C, and max AC contact current of 5A. Ideal for panel mounting applications requiring momentary switch action with simulated roller lever actuator.
3AC6-D8
3AC6-D8 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 12.7" body width, 40.49mm height, and 6.35mm actuator travel. It has a max AC contact current of 15.1A@250VAC and DC contact current of 0.5A@125VDC, making it suitable for panel mount applications requiring momentary switch action.
MS16106-1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Contact Function: ON-OFF; Termination Type: SCREW;
D2F-L3-A
Omron D2F-L3-A snap action switch has 30k cycle electrical life, SPDT switch function, and IP40 sealing. Ideal for applications requiring a 6.5" wide limit switch with simulated roller lever actuator, such as industrial automation systems. Operating temperature range from -25°C to 65°C ensures reliable performance in various environments.
MS27240-1
MS27240-1 by Honeywell Sensing And Control is a corrosion-proof DPDT snap action/limit switch with 25.4mm body height and 4.2mm plunger actuator travel. It has a max DC contact voltage of 28V, current rating of 7A@28VDC, and operating force of 53.38N. Ideal for panel mount-threaded applications requiring momentary switch action with wire termination type.
D2F-L-T
Omron's D2F-L-T snap action switch has a 30000 cycle electrical life, SPDT switch function, and IP40 sealing. With a body width of 5.8 inch and max operating temperature of 65 °C, it is ideal for applications requiring momentary switch action in industrial settings.
SS-5-FD
Omron SS-5-FD snap action switch has 200000 cycles electrical life, SPDT switch function, and IP40 sealing. With a max AC contact current of 5A@125VAC, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 85°C.
1HS3
1HS3 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 17.45 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current of 0.5A, it offers reliable performance in various industrial settings.
Z-15GW3-B
Omron Z-15GW3-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a sealing rating of IP00, it's suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
11SM401-H2
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
Z-15HW24
The Omron Z-15HW24 is a snap action and limit switch with a 500000 cycle electrical life. It has a body width of 17.45 inch and sealing rating of IP00. This switch is commonly used in panel mount applications for its SPDT switch function and max AC contact current of 15A@250VAC.
BZ-2R722331
BZ-2R722331 by Honeywell is a SPDT snap action/limit switch with 1A@125VAC AC contact rating. With 0.51mm actuator travel, it's ideal for panel mounting applications requiring momentary switch action. The switch features matte tin terminal finish and compact dimensions of 17.45x21.34x49.28 mm (WxHxL).
BZE6-2RQ219
BZE6-2RQ219 by Honeywell Sensing And Control is a snap action & limit switch with an IP40 sealing. It has a max operating temperature of 71°C and a max AC contact current of 0.5A. This switch is commonly used for panel mounting applications requiring momentary switch action.
ESE22MV21T
The Panasonic ESE22MV21T is a SPST snap action/limit switch with 50000 cycles electrical life. Featuring a 4.25mm actuator travel and 0.3N max operating force, it is ideal for momentary applications requiring a compact design. With a temperature range of -10°C to 70°C, this switch offers reliable performance in various environments.
D2F-01FL3-D3
Omron's D2F-01FL3-D3 snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. Ideal for panel mounting applications, it operates b/w -25°C to 65°C with a max DC contact voltage of 30V and current rating of 0.1A@30VDC.
V7-1C17D8-201
Honeywell Sensing And Control's V7-1C17D8-201 is a 10.16" wide snap action/limit switch with SPDT function, suitable for panel mounting. It has a max AC contact current of 15A@277VAC and DC contact voltage of 125V, making it ideal for applications requiring corrosion-proof sealing and momentary switch action.
9007AO1A
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
DC1CC3LC
The Cherry
The Cherry DC1CC3LC snap action/limit switch has a polyester housing, copper alloy terminals, and 6000 cycle electrical life. With IP67 sealing, it is ideal for applications requiring SPDT switch function, such as panel mounting in environments with temperatures ranging from -40 to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved