Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
SHL-W2155
Omron
Omron SHL-W2155 is a snap action/limit switch with SPST function, IP67 sealing, and 500000 cycle electrical life. Ideal for applications requiring momentary switch action, it has a max AC contact current of 10A@250VAC and operates in temperatures ranging from -10 to 80°C. With HINGE ROLLER LEVER actuator type and screw termination, it offers reliable performance in panel mount setups.
18.5
HINGE ROLLER LEVER
17.5 inch
32.9 mm
73.5 mm
10A@250VAC
10 A
10A@14VDC
250 V
14 V
500000 Cycle(s)
SHL
PANEL MOUNT
2.55 N
80 Cel
-10 Cel
13 mm
IP67
MOMENTARY
SPST
SNAP ACTING/LIMIT SWITCH
SCREW
SHL-W255-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE ROLLER LEVER; Sealing: IP67; Maximum Operating Force: 3.92 N;
11
SHORT HINGE ROLLER LEVER
.1A@125VAC
.1 A
.1A@30VDC
125 V
30 V
3.92 N
3 mm
SHL-W255
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum AC Contact Voltage: 250 V; Maximum DC Contact Voltage: 14 V;
SHL-W3155-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE ROLLER LEVER; Electrical Life: 500000 Cycle(s); Maximum AC Contact Voltage: 125 V;
SHL-W3155
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): HINGE ROLLER LEVER; Switch Action: MOMENTARY; Maximum DC Contact Voltage: 14 V;
SHL-W355-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE ROLLER LEVER; Actuator Travel (mm): 11; Electrical Life: 500000 Cycle(s);
8 mm
SHL-W355
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE ROLLER LEVER; Sealing: IP67; Maximum Pre Travel: 8 mm;
SHL-W55-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE LEVER; Minimum Operating Temperature: -10 Cel; Switch Action: MOMENTARY;
SHORT HINGE LEVER
3.14 N
SHL-W55
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): SHORT HINGE LEVER; Termination Type: SCREW; Body Length/Diameter: 73.5 mm;
35.9 mm
TZ-1GV22
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE ROLLER LEVER; Maximum Pre Travel: 1.5 mm; AC Maximum Rating R Load (Contact): 1A@250VAC;
3.4
17.4 inch
21.8 mm
49.2 mm
1A@250VAC
1 A
1A@30VDC
50000 Cycle(s)
TZ
2.35 N
400 Cel
-65 Cel
1.5 mm
IP00
SPDT
Nickel (Ni)
TZ-1GV2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum AC Contact Current: 1 A; Maximum Operating Force: 1.27 N;
6.1
1.27 N
2.6 mm
TZ-1GV
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 21.8 mm; Manufacturer Series: TZ;
8.1
HINGE LEVER
.98 N
3.5 mm
TZ-1G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Electrical Life: 50000 Cycle(s); Body Width: 17.4 inch;
.53
PIN PLUNGER
4.9 N
.4 mm
V-10G-1E4-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PIN PLUNGER; Maximum Operating Force: .98 N; Maximum Pre Travel: 1.2 mm;
2.5
10.3 inch
15.9 mm
27.8 mm
.1A@125VDC
300000 Cycle(s)
V
-25 Cel
1.2 mm
SOLDER
V-15G1-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SHORT HINGE LEVER; Manufacturer Series: V; Maximum Operating Force: 1.96 N;
15A@250VAC
15 A
100000 Cycle(s)
1.96 N
V-15G2-1E5-K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE LEVER; Body Height: 15.9 mm; Maximum DC Contact Current: .1 A;
5.6
1.23 N
3.3 mm
AZH2041
Panasonic
The Panasonic AZH2041 is a SPDT snap action/limit switch with 500000 cycles electrical life. Featuring IP60, IP64, IP65, and IP67 sealing, it has a max operating temperature of 80°C. With short roller lever actuator type and 5A@250VAC AC max rating R load, it is ideal for panel mounting applications.
6
SHORT ROLLER LEVER
18 inch
44.5 mm
5A@250VAC
5 A
5A@30VDC
e4
AZH
2 mm
IP60; IP64; IP65; IP67
Gold (Au)
CONNECTOR
FF6-10-DC-03-SS
Honeywell Sensing And Control
FF6-10-DC-03-SS by Honeywell is a 19mm snap action/limit switch with IP67 sealing. It operates b/w -10°C to 55°C, suitable for panel mounting applications. Featuring SPST switch function and momentary action, it offers reliable performance in various industrial settings.
19 inch
82.5 mm
19 mm
FF6
55 Cel
WIRE
FF6-11-AC-03
FF6-11-AC-03 by Honeywell is a 19mm snap action/limit switch with DPST function, IP67 sealing, and -10 to 55°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action with wire termination.
DPST
FF6-11-DC-03-SS
FF6-11-DC-03-SS by Honeywell Sensing And Control is a 19mm snap action/limit switch with DPST function, IP67 sealing, and wire termination. It operates b/w -10°C to 55°C, making it suitable for panel mounting applications requiring momentary switch action in harsh environments.
FF6-11-DC-03
FF6-11-DC-03 by Honeywell is a 19mm snap action/limit switch with DPST function, IP67 sealing, and -10 to 55°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action with wire termination.
FF6-20-DC-03-SS
FF6-20-DC-03-SS by Honeywell is a 19mm snap action/limit switch with DPST function, IP67 sealing, and -10 to 55°C operating temperature range. Ideal for panel mounting applications requiring momentary switch action with wire termination.
FFS-11-10
Honeywell Sensing And Control's FFS-11-10 is a 19" snap action switch (DPST) with 87mm height and 24mm length. It features momentary switch action, wire termination, and panel mounting. Ideal for applications requiring reliable switching in industrial machinery and equipment.
87 mm
24 mm
FFS-20-10
Honeywell Sensing And Control's FFS-20-10 is a 19" snap action/limit switch (DPST) with 87mm height and 24mm length/diameter. It offers momentary switch action, wire termination, and panel mounting feature. Ideal for applications requiring precise control in limited space environments.
BZ-2RL2T04
Honeywell Sensing And Control's BZ-2RL2T04 is a SPDT snap acting/limit switch with 5.48mm actuator travel and 1.39N max operating force. Its corrosion-proof sealing makes it ideal for panel mount applications requiring momentary switch action in industrial settings.
5.48
ROLLER TYPE
17.45 inch
23.88 mm
49.28 mm
1.39 N
3.96 mm
CORROSION PROOF
BZ-2RT04
BZ-2RT04 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 3.61N max operating force and 0.51mm actuator travel. Measuring 17.45" in width, 23.88mm in height, and 49.28mm in length/diameter, it's ideal for panel mounting applications requiring momentary switch action within a 0.38mm pre-travel limit.
.51
3.61 N
.38 mm
1XE1-T
1XE1-T by Honeywell Sensing And Control is a SPDT snap acting/limit switch with a plunger actuator. It has a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC, suitable for panel mounting applications requiring corrosion-proof sealing. With an actuator travel of 1.37mm and max operating force of 4.73N, it offers precise momentary switch action in a compact body measuring 15.64mm x 8.03 inch x 15.24 mm.
1.37
PLUNGER
8.03 inch
15.24 mm
15.64 mm
7A@115VAC
7 A
7A@28VDC
115 V
28 V
4.73 N
1.27 mm
1XE1
1XE1 by Honeywell Sensing And Control is a SPDT snap acting/limit switch with 8.03" body width, corrosion-proof sealing, and 15.24mm plunger actuator. It has a max AC contact current of 7A@115VAC and DC contact current of 7A@28VDC. Ideal for panel mounting applications requiring momentary switch action.
1XE201
1XE201 by Honeywell is a snap action/limit switch with SPDT function, 8.03" body width, and corrosion-proof sealing. It has a max AC contact current of 7A@115VAC and DC contact voltage of 28V. Ideal for panel mounting applications requiring momentary switch action with plunger actuator type.
15.65 mm
1XE301
1XE301 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plunger actuator. Featuring corrosion-proof sealing, it has a max DC contact voltage of 28V and can handle up to 1A current. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
1A@28VDC
21SM284-T2
21SM284-T2 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 9.04mm height, and 0.89mm actuator travel. It operates at max temp of 121°C, AC contact current of 5A@115VAC, and DC contact voltage of 28V. Ideal for panel mounting applications requiring momentary switch action with max force of 1.39N.
.89
6.35 inch
9.04 mm
19.84 mm
5A@115VAC
5A@28VDC
121 Cel
.76 mm
21SM284
21SM284 by Honeywell Sensing And Control is a SPDT snap action/limit switch with PLUNGER actuator. It has a body width of 6.35in, max operating temp of 121°C, and can handle up to 5A@115VAC. Ideal for panel mounting applications requiring momentary switch action with a compact design.
21SX39-T2
21SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 7A@250VAC and DC contact current of 7A@28VDC, suitable for panel mounting applications. With a compact body width of 5.08", it offers precise actuation with an actuator travel of 0.6mm and max operating force of 1.39N.
.6
PLASTIC PLUNGER
5.08 inch
8.89 mm
12.7 mm
7A@250VAC
85 Cel
.51 mm
GOLD
23SX39-T2
23SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 5.08" and max operating temperature of 204°C, suitable for panel mounting applications requiring momentary switch action with 1A@30VDC DC max rating.
.61
204 Cel
413SX21-T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): PLUNGER; Switch Action: MOMENTARY; Body Height: 8.89 mm;
91SX39-T2
91SX39-T2 by Honeywell Sensing And Control is a SPDT snap action/limit switch with 3.96" body width and 8.89mm height. It has a max AC contact current of 7A@115VAC, suitable for panel mounting applications requiring momentary switch action with plunger actuator type.
3.96 inch
91SX39-T
The Honeywell 91SX39-T snap action switch features SPDT function, 7A max AC/DC current, and 0.61mm actuator travel. Ideal for panel mounting applications requiring momentary switch action with a plunger actuator type.
93SX39-T
93SX39-T by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a body width of 3.96" and max DC contact voltage of 28V, suitable for panel mount applications requiring momentary switch action and 1A@28VDC max rating.
V15H16-CZ100A03-K
V15H16-CZ100A03-K by Honeywell is a SPDT snap action/limit switch with 10.3" width, 15.9mm height, and 16A@250VAC AC contact current. It has a 9mm actuator travel and 0.29N max operating force, suitable for panel mount applications requiring momentary switch action.
9
28.8 mm
16A@250VAC
16 A
.29 N
6.4 mm
QUICK CONNECT
11SM1
11SM1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.64mm and max operating force of 1.39N.
.64
BZLN-LH
BZLN-LH by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC and 0.5A@125VDC DC max ratings. Featuring a steel plunger actuator, it has a body width of 25.4 inch and height of 42.42 mm, suitable for panel mounting applications requiring momentary switch action.
5.92
STEEL PLUNGER
25.4 inch
42.42 mm
103.12 mm
15A@480VAC
.5 A
.5A@125VDC
480 V
22.24 N
102HS1
102HS1 by Honeywell Sensing And Control is a hermetically sealed snap action/limit switch with a body width of 17.45 inch and a max operating temperature of 149 °C. It has a SPDT switch function and is commonly used for panel mounting applications.
1.9
LEVER
28.7 mm
49.78 mm
1A@125VAC
6.12 N
149 Cel
-54 Cel
1.65 mm
HERMETICALLY SEALED
111SM1-H58
111SM1-H58 by Honeywell is a snap action/limit switch with SPDT function. It features a body width of 6.35in, corrosion-proof sealing, and steel leaf type actuator. Ideal for panel mounting applications, it has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC.
6.3
STEEL LEAF TYPE
1.95 N
5.54 mm
111SM602-H4
The Honeywell 111SM602-H4 is a SPDT snap action/limit switch with a roller lever actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications requiring momentary switch action with quick connect termination.
6.32
ROLLER LEVER
5.56 mm
11SM1077-T
11SM1077-T by Honeywell is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 0.1A@125VAC and DC contact voltage of 30V. Ideal for panel mounting applications requiring momentary switch action with an actuator travel of 0.63mm.
.63
.5 mm
11SM144
11SM144 by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers an actuator travel of 0.63mm and max operating force of 0.83N.
10.16 inch
15.88 mm
28.83 mm
.83 N
11SM244-T
11SM244-T by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 9.04mm height, and 0.63mm actuator travel. It has a max operating temperature of 204°C and can handle up to 5A@250VAC or 0.3A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
SPHERICAL PLASTIC PLUNGER
.3 A
.3A@125VDC
11SM3-S
11SM3-S by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers 0.63mm actuator travel and 0.97N max operating force.
27.61 mm
21.61 mm
.97 N
© 2023 All rights reserved
