Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ULV7F2H11311
E-switch
PUSHBUTTON SWITCH;
PUSHBUTTON SWITCH
ULV4F2BSS311
ULV4F2HSS341
SV4F23SS301
SV4F23SS301 by E-switch is a SPST pushbutton switch with 200000 cycles electrical life, IK10/IP67 sealing, and white LED illumination. Ideal for applications requiring momentary switch action, it has a max operating force of 4.5N and can handle up to 2A@36VDC load.
.08 inch
1.8
BUTTON TYPE
16.81 mm
22 mm
M19X1.0
SILVER
2 A
2A@36VDC
OFF-(ON)
50 mohm
36 V
2000VAC
200000 Cycle(s)
WHITE LED
1000000000 ohm
PANEL MOUNT
4.5 N
70 Cel
-20 Cel
IK10; IP67
MOMENTARY
SPST
.094 inch
SOLDER
3-101-001
Schurter Ag
The Schurter Ag 3-101-001 is a stainless steel pushbutton switch with an electrical life of 20,000 cycles. It offers corrosion-proof and environmentally sealed housing, suitable for applications requiring IK07 sealing. With SPST switch function, it has a max AC contact current of 16A@250VAC and DC contact current of 16A@30VDC, making it ideal for panel mount-threaded installations.
.051 inch
STAINLESS STEEL
5.2
16.6 inch
19.7 mm
.866 inch
.72 inch
M22X1.0
16A@250VAC
16 A
16A@30VDC
100 mohm
250 V
30 V
20000 Cycle(s)
100000000 ohm
PANEL MOUNT-THREADED
10 N
85 Cel
BOX
CORROSION PROOF; ENVIRONMENTALLY SEALED; IK07
LATCHED
.327 inch
QUICK CONNECT
3-101-031
9532CD
Apem Components
The Apem Components 9532CD is a SPST pushbutton switch with PA9T housing and BRASS terminals. It has an electrical life of 100,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring momentary switch action in temperatures ranging from -30 to 65°C.
.137 inch
GLASS FILLED POLYAMIDE
1.75
PLUNGER
8 mm
6.5 mm
.165 inch
.118 inch
BRASS
GOLD
.1 A
0.1A@30VDC
30000 mohm
1000VRMS
100000 Cycle(s)
PA9T
65 Cel
-30 Cel
EPOXY TERMINAL SEALED
SOLDER LUG
MPI002/28/RD/24
Bulgin
Bulgin's MPI002/28/RD/24 is a stainless steel pushbutton switch with red LED illumination. It has an electrical life of 35,000 cycles and sealing rating of IP66. Ideal for applications requiring momentary-tactile switch action in environments with temperatures ranging from -30 to 70°C.
.59 inch
.05 A
.05A@24VDC
24 V
35000 Cycle(s)
RED LED
POLYAMIDE
e3
IP66
MOMENTARY-TACTILE
Tin (Sn)
COPPER ALLOY
YW1B-V4E02R
Idec
YW1B-V4E02R by Idec is a red pushbutton switch with IP65 sealing. It has an electrical life of 100,000 cycles and insulation resistance of 100MΩ. Ideal for applications requiring a mushroom-type actuator, it can handle up to 10A@120VAC AC max rating R load contact function.
RED
1.28 inch
MUSHROOM TYPE
30 inch
41.4 mm
10A@120VAC
10 A
8 A
8A@24VDC
ON-ON
120 V
55 Cel
IP65
SCREW
IXP5S12M
The Apem Components IXP5S12M is a black pushbutton switch with thermoplastic housing and silver terminals. It has an electrical life of 100,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring IP67/IP69K sealing, such as panel-mounted devices needing a momentary DPST switch with a max operating force of 9N.
BLACK
.189 inch
SILICONE
ROUND TYPE
17 mm
16.3 mm
.433 inch
.427 inch
2A@28VDC
28 V
2100VAC
THERMOPLASTIC
e4
9 N
-40 Cel
EPOXY TERMINAL SEALED; IP67; IP69K
DPST
Silver (Ag)
.222 inch
A22NL-MGM-TGA-G102-GC
Omron
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: DPST; Type (Actuator): PUSHBUTTON; Contact Resistance: 100 mohm; Dielectric Withstand Volts (V): 2500VAC;
GREEN
.752 inch
6
PUSHBUTTON
43.3 mm
43.5 mm
10A@24VAC
2500VAC
GREEN LED
18 N
-25 Cel
EPOXY
A3CT-7011
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROUND TYPE; Diameter (Bushing): .472 inch; Electrical Life: 100000 Cycle(s);
.138 inch
3.5
26.6 mm
14 mm
.472 inch
.61 inch
M12X1
1A@125VAC
1 A
1A@30VDC
50000 mohm
125 V
2.45 N
-10 Cel
IP40
.232 inch
A165E-S-03U-S
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: 3PST; Type (Actuator): PUSHBUTTON; Maximum Operating Force: 14.7 N; Length (Actuator): .807 inch;
.807 inch
15.8 inch
21.5 mm
16 mm
M16X1
14.7 N
3PST
.236 inch
AL6Q-A23-A
AL8H-M11R
CW1B-M1E11S
CW1B-M1E11S by Idec is a DPST pushbutton switch with IP65, IP66, and IP67 sealing. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and operates b/w -25°C to 60°C. Ideal for panel mounting applications requiring a momentary switch with max AC contact current of 10A@120VAC.
.098 inch
ROUND FLUSH PUSHBUTTON
APPROVALS: CCC; CE; CUL; UL
39.9 mm
2000000 Cycle(s)
60 Cel
BULK
IP65; IP66; IP67
CW1L-M1E10QM4Y
CW1L-M1E10QM4Y by Idec is a SPST pushbutton switch with 2000000 cycles electrical life, YELLOW LED illumination, and IP65/IP66/IP67 sealing. Ideal for applications requiring a momentary round flush illuminated pushbutton switch with 10A@240VAC AC max rating and screw termination.
ROUND FLUSH ILLUMINATED PUSHBUTTON
10A@240VAC
240 V
YELLOW LED
CW1L-M1E10QM4R
CW1L-M1E10QM4R by Idec is a SPST pushbutton switch with red LED illumination and IP65, IP66, IP67 sealing. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and operates b/w -25 to 55 °C. Ideal for panel mounting applications requiring momentary switch action at up to 10A/240VAC.
CW1L-M2E02QMA
CW1L-M2E02QMA by Idec is a DPST pushbutton switch with amber LED illumination. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and sealing ratings of IP65, IP66, and IP67. Ideal for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 55°C.
.205 inch
ROUND EXTENDED ILLUMINATED PUSHBUTTON
10A@220VAC
220 V
AMBER LED
CW1L-M2E10QHR
CW1L-M2E10QHR by Idec is a SPST pushbutton switch with red LED illumination and IP65, IP66, IP67 sealing. It has an electrical life of 2M cycles and insulation resistance of 100M ohm. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -25°C to 55°C.
CW4L-M1E11Q4R
CW4L-M1E11Q4R by Idec is a DPST pushbutton switch with red LED illumination. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and sealing ratings of IP65, IP66, and IP67. Ideal for applications requiring a reliable illuminated pushbutton switch with high durability and waterproof capabilities.
CW1B-A2E22B
CW1B-A2E22B by Idec is a 4PST pushbutton switch with IP65, IP66, and IP67 sealing. It has an electrical life of 250K cycles and insulation resistance of 100M ohm. With a max AC contact current of 10A, it's ideal for panel mount applications requiring a durable and reliable pushbutton switch.
ROUND EXTENDED PUSHBUTTON
44.6 mm
250000 Cycle(s)
MAINTAINED
4PST
CW1B-M1E02R
CW1B-M1E02R by Idec is a DPST pushbutton switch with IP65/66/67 sealing, suitable for panel mounting. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and can handle up to 10A@120VAC or 8A@24VDC. Ideal for applications requiring momentary switch action in harsh environments.
CW1L-M2E01QHS
CW1L-M2E01QHS by Idec is a SPST pushbutton switch with BLUE LED illumination. It has an electrical life of 2M cycles, insulation resistance of 100M ohm, and sealing ratings of IP65, IP66, and IP67. Ideal for applications requiring a durable and illuminated pushbutton switch with a max AC contact current of 10A@120VAC.
BLUE LED
CW1L-M2E02Q4PW
CW1L-M2E02Q4PW by Idec is a DPST pushbutton switch with 2000000 cycle electrical life. Featuring PURE WHITE LED illumination, it has an insulation resistance of 100M ohm and sealing ratings of IP65, IP66, and IP67. Ideal for applications requiring a reliable illuminated pushbutton switch with high durability and protection against environmental elements.
PURE WHITE LED
CW1L-M2E11Q2G
CW1L-M2E11Q2G by Idec is a round extended illuminated pushbutton switch with a green LED. It has an electrical life of 2,000,000 cycles and insulation resistance of 100,000,000 ohms. This switch is suitable for panel mounting and has sealing ratings of IP65, IP66, and IP67.
10A@6VAC
8A@6VDC
6 V
CW4B-A1E10G
CW4B-A1E10G by Idec is a SPST pushbutton switch with IP65/66/67 sealing, suitable for panel mounting. It has an electrical life of 250K cycles, insulation resistance of 100M ohm, and operates b/w -25°C to 60°C. With a max AC contact current of 10A@120VAC and DC contact current of 8A@24VDC, it's ideal for various industrial applications.
CW1B-A2E20S
CW1B-A2E20S by Idec is a DPST pushbutton switch with IP65/66/67 sealing. It has an electrical life of 250K cycles, insulation resistance of 100M ohm, and operates b/w -25°C to 60°C. Ideal for panel mounting applications requiring a maintained switch action with max AC contact current of 10A@120VAC and DC contact current of 8A@24VDC.
CW1L-A2E01QMY
CW1L-A2E01QMY by Idec is a SPST pushbutton switch with yellow LED illumination. It has an electrical life of 250K cycles, insulation resistance of 100M ohm, and sealing ratings of IP65/66/67. Ideal for panel mounting applications requiring a maintained switch action with a max AC contact current of 10A@220VAC.
CW1B-M1E10S
CW1B-M1E10S by Idec is a round flush pushbutton switch with SPST function. It has an electrical life of 2M cycles, IP65/66/67 sealing, and operates b/w -25°C to 60°C. Ideal for panel mounting applications, it offers a max AC contact current of 10A@120VAC and DC contact current of 8A@24VDC.
CW1B-M1E20S
CW1B-M1E20S by Idec is a DPST pushbutton switch with IP65, IP66, and IP67 sealing. It has an electrical life of 2M cycles and insulation resistance of 100M ohm. Ideal for panel mounting applications with a max AC contact current of 10A@120VAC.
A22NN-RPA-NYA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; AC Maximum Rating R Load (Contact): 10A@120VAC; Insulation Resistance: 100000000 ohm;
YELLOW
45.3 mm
47 mm
500000 Cycle(s)
LED
IP66; MOISTURE PROOF
A22NN-RNA-NAA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Switch Action: LATCHED; Contact Resistance: 100 mohm;
BLUE
FLAT BUTTON
A22NN-RNA-UWA-P122-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Insulation Resistance: 100000000 ohm; Maximum Operating Temperature: 70 Cel;
WHITE
.531 inch
39.5 mm
47.6 mm
SNAP ON
A22NN-RPA-NBA-G002-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Minimum Operating Temperature: -25 Cel; Color (Actuator): BLACK;
A22NN-RPA-NBA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Sealing: IP66; MOISTURE PROOF; Maximum AC Contact Voltage: 120 V;
A22NN-RPA-NWA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Maximum DC Contact Current: 8 A; Maximum DC Contact Voltage: 24 V;
A22NN-BMA-NRA-G002-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): MUSHROOM TYPE; Dielectric Withstand Volts (V): 2500VAC; Electrical Life: 500000 Cycle(s);
.815 inch
A22NN-RPM-NWA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Dielectric Withstand Volts (V): 2500VAC; Length (Actuator): .752 inch;
A22NN-RNM-UWA-P112-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; AC Maximum Rating R Load (Contact): 10A@120VAC; Electrical Life: 500000 Cycle(s);
A22NN-RMA-NRA-G101-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): MUSHROOM TYPE; Length (Actuator): .815 inch; Actuator Travel (mm): 6;
A22NN-RPM-NAA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Illumination: LED; Body Length/Diameter: 47 mm;
A22NN-RPM-NBA-G002-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; Body Height: 45.3 mm; AC Maximum Rating R Load (Contact): 10A@120VAC;
A22NN-RNM-NBA-G002-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Contact Resistance: 100 mohm; Maximum AC Contact Voltage: 120 V;
A22NN-RPA-NAA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): BUTTON TYPE; AC Maximum Rating R Load (Contact): 10A@120VAC; Color (Actuator): BLUE;
A22NN-MNM-NBA-G102-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Illumination: LED; Maximum AC Contact Current: 10 A;
A22NN-BNM-UGA-G100-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Switch Action: MOMENTARY; Dielectric Withstand Volts (V): 2500VAC;
A22NN-BNM-URA-G002-NN
PUSHBUTTON SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): FLAT BUTTON; Termination Type: SCREW; Body Length/Diameter: 47 mm;
© 2023 All rights reserved
