Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
PV4F2Y0SS-346
E-switch
PV4F2Y0SS-346 by E-switch is a stainless steel pushbutton switch with 50000 cycles electrical life. It has 2A@48VDC DC max rating, 2mm actuator travel, and -20 to 55°C operating temperature range. Ideal for panel mount applications requiring momentary switch action.
STAINLESS STEEL
.079 inch
2.794
PUSHBUTTON
125V, RING STYLE, BLUE LENS
.748 inch
M19P1
BRASS
SILVER
2 A
2A@48VDC
50 mohm
48 V
2000VAC
50000 Cycle(s)
1000000000 ohm
PANEL MOUNT
55 Cel
-20 Cel
MOMENTARY
PUSHBUTTON SWITCH
.244 inch
SOLDER LUG
PV5S24019
PV5S24019 by E-switch is a red pushbutton switch with SPST function. It has an electrical life of 200,000 cycles and insulation resistance of 1,000,000,000 ohms. Ideal for applications requiring momentary switch action and panel mounting in temperatures ranging from -20 to 70°C.
RED
.283 inch
BLACK
.472 inch
M12P1
OFF-(ON)
2000VRMS
200000 Cycle(s)
POLYBUTYLENE TEREPHTHALATE
70 Cel
SPST
.149 inch
RP8200B2M1CEBLKBLKRED
RP8200B2M1CEBLKBLKRED by E-switch is a SPST pushbutton switch with 200000 cycles electrical life. It has sealing with epoxy, gold over silver plating, and operates b/w -30 to 85 °C. Ideal for applications requiring a latched OFF-ON contact function at a max of 24VDC and 0.1A load rating.
.284 inch
2.4892
LED COLOR - RED
M12X0.75
GOLD OVER SILVER
.1 A
0.1A@24VDC
OFF-ON
100 mohm
24 V
1000VRMS
85 Cel
-30 Cel
EPOXY
LATCHED
QUICK CONNECT
PV1F240SS
PV1F240SS by E-switch is a SPST pushbutton switch with 200000 cycles electrical life. It has 1000000000 ohm insulation resistance and operates b/w -20 to 55 °C. Ideal for applications requiring momentary OFF-(ON) contact function, such as panel mounting with solder lug termination.
COPPER
.287 inch
TL2201EEZB1CBLK
TL2201EEZB1CBLK by E-switch is a DPDT pushbutton switch with 10000 cycles electrical life. It features SILVER plating, PHOSPHOR BRONZE contacts, and POLYBUTYLENE housing material. Ideal for applications requiring ON-ON contact function at 30VDC and 0.1A current rating.
.461 inch
ACETAL
8.509 inch
8.509 mm
PHOSPHOR BRONZE
0.1A@30VDC
ON-ON
30 V
500VAC
10000 Cycle(s)
100000000 ohm
THROUGH HOLE-STRAIGHT
6
DPDT
.138 inch
COPPER ALLOY
SOLDER
PV5S24011G
PV5S24011G by E-switch is a black pushbutton switch with a brass terminal material. It has an electrical life of 200,000 cycles and insulation resistance of 1,000,000,000 ohms. This switch is commonly used in panel mount applications requiring a SPST contact function.
GOLD
.137 inch
LC1258EENS
LC1258EENS by E-switch is a DPDT pushbutton switch with steel housing and brass terminals. It has an electrical life of 10,000 cycles and a max DC contact voltage of 30V. Ideal for panel mounting applications requiring a latched switch action with ON-(ON) contact function.
90 deg
.394 inch
POLYACETAL
8.3058 inch
11.9888 mm
5.0038 mm
.3 A
0.3A@30VDC
ON-(ON)
BREAK-BEFORE-MAKE
STEEL
PHENOLIC
MOLDED
PV9F2V0SS-341
PV9F2V0SS-341 by E-switch is a DPDT pushbutton switch with 50000 cycles electrical life. Featuring SILVER plating, it has an actuator travel of 2.794mm and operates b/w -20 to 55°C. Ideal for applications requiring a momentary ON-(ON) contact function, this switch has a max DC rating of 2A@48VDC and withstands up to 2000VAC dielectric volts.
2.8V, RING STYLE, BLUE LENS
8.6868 mm
16.7894 mm
1.102 inch
.839 inch
M28X1.5
.41 inch
A30NZ-MNM-NYA
Omron
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; Minimum Operating Temperature: -25 Cel; Color (Actuator): YELLOW; AC Maximum Rating I Load (Contact): 10A@24VAC; Maximum AC Contact Voltage: 120 V;
YELLOW
.354 inch
5.9944
10A@24VAC
10A@120VAC
10 A
8 A
8A@24VDC
120 V
2500VAC
500000 Cycle(s)
A30NZ-M
-25 Cel
A30NZ-MNM-NGA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; Maximum Operating Temperature: 70 Cel; Color (Actuator): GREEN; Maximum AC Contact Voltage: 120 V; Insulation Resistance: 100000000 ohm;
GREEN
A30NZ-MNM-NRA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; AC Maximum Rating I Load (Contact): 10A@24VAC; Manufacturer Series: A30NZ-M; Color (Actuator): RED; Electrical Life: 500000 Cycle(s);
A30NZ-MNM-NBA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; Manufacturer Series: A30NZ-M; Insulation Resistance: 100000000 ohm; Switch Action: MOMENTARY; Maximum Operating Temperature: 70 Cel;
A30NZ-MNM-URA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; Color (Actuator): RED; Dielectric Withstand Volts (V): 2500VAC; Maximum Operating Temperature: 70 Cel; Maximum AC Contact Voltage: 120 V;
A30NZ-MNM-NAA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; AC Maximum Rating I Load (Contact): 10A@24VAC; Electrical Life: 500000 Cycle(s); Maximum AC Contact Voltage: 120 V; DC Maximum Rating R Load (Contact): 8A@24VDC;
BLUE
A30NZ-MNM-UOA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; AC Maximum Rating I Load (Contact): 10A@24VAC; Contact Resistance: 100 mohm; Dielectric Withstand Volts (V): 2500VAC; Maximum DC Contact Voltage: 24 V;
ORANGE
A30NZ-MNM-UAA
PUSHBUTTON SWITCH; Type (Actuator): PUSHBUTTON; Manufacturer Series: A30NZ-M; Maximum Operating Temperature: 70 Cel; Maximum AC Contact Voltage: 120 V; Maximum DC Contact Current: 8 A;
14SP-L1-02-B
Grayhill
14SP-L1-02-B by Grayhill is a SPST pushbutton switch with LED illumination. Featuring BERYLLIUM COPPER terminals, it has an electrical life of 1000000 cycles and insulation resistance of 10000000000 ohms. Ideal for applications requiring a reliable pushbutton switch with gold plating on contacts and thermoplastic insulator material.
0 deg
THERMOPLASTIC
1.524
BLUE LED COLOR
12.7 mm
BERYLLIUM COPPER
1000000 Cycle(s)
LED
10000000000 ohm
SURFACE MOUNT-STRAIGHT
-40 Cel
14SP-L1-02-G
14SP-L1-02-G by Grayhill is a SPST pushbutton switch with LED illumination. Featuring BERYLLIUM COPPER terminals, it has an electrical life of 1000000 cycles and insulation resistance of 10000000000 ohms. Ideal for applications requiring a reliable pushbutton switch with long lifespan and LED indication.
GREEN LED COLOR
14SP-L1-02-O
The Grayhill 14SP-L1-02-O is a SPST pushbutton switch with LED illumination and gold plating. With an electrical life of 1000000 cycles, it operates b/w -40 to 85°C. Ideal for applications requiring a reliable pushbutton switch with high insulation resistance and low contact resistance.
ORANGE LED COLOR
14SP-L1-02-Y
The Grayhill 14SP-L1-02-Y is a SPST pushbutton switch with LED illumination. Featuring BERYLLIUM COPPER terminals, it has an electrical life of 1000000 cycles and insulation resistance of 10000000000 ohms. Ideal for applications requiring a reliable pushbutton switch with long lifespan and efficient LED illumination.
XB4BA42
Schneider Electric Sa
XB4BA42 by Schneider Electric Sa is a flush type pushbutton switch with SPST switch function. It features a red LED illumination, IK03; IP66 sealing, and 1000000 cycle electrical life. Ideal for panel mounting applications, it has a max operating temperature of 70°C and can handle up to 6A@120VAC AC max rating R load.
FLUSH TYPE
REFERENCE STANDARD: JIS; RINA; UL
30 inch
43 mm
46.5 mm
6A@120VAC
6 A
.55 A
.55A@125VDC
125 V
RED LED
3.5 N
IK03; IP66
SCREW
XB4BA51
The Schneider Electric Sa XB4BA51 is a SPST pushbutton switch with an electrical life of 1000000 cycles. With IK03; IP66 sealing, it can operate in temperatures ranging from -25°C to 70°C. Ideal for panel mounting applications, it has a max AC contact current of 6A@120VAC and a max DC contact voltage of 125V.
REFERENCE STANDARD: JIS; LROS; RINA; UL
3.8 N
A3SJ-90A1-24EG
PUSHBUTTON SWITCH; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; AC Maximum Rating R Load (Contact): 2A@250VAC; Body Width: 17.8054 inch; Maximum AC Contact Current: 2 A;
.165 inch
2.2098
GREEN COLOR LED
17.8054 inch
32.512 mm
24.003 mm
2A@250VAC
250 V
100000 Cycle(s)
A3S
SPDT
.295 inch
A3SJ-90A1-24ER
PUSHBUTTON SWITCH; Switch Function: SPDT; Type (Actuator): PUSHBUTTON; Illumination: LED; AC Maximum Rating R Load (Contact): 2A@250VAC; Body Width: 17.8054 inch;
RED COLOR LED
A3SJ-90B1-24EW
Omron A3SJ-90B1-24EW is a SPDT pushbutton switch with LED illumination. It has an electrical life of 100,000 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a max AC contact current of 2A at 250VAC, such as control panels or industrial machinery.
WHITE COLOR LED
ALTERNATE
A3SJ-90C1-24EY
PUSHBUTTON SWITCH; Switch Function: DPDT; Type (Actuator): PUSHBUTTON; Maximum AC Contact Voltage: 250 V; Additional Features: YELLOW COLOR LED; Illumination: LED;
YELLOW COLOR LED
PNP8S3T2C03QE
C & K Components
PUSHBUTTON SWITCH; Terminal Finish: Silver (Ag); JESD-609 Code: e4;
e4
Silver (Ag)
PVA6LRE21131
The E-switch PVA6LRE21131 is a SPST pushbutton switch with 100000 cycles electrical life. Featuring a green LED illumination, it has a max operating force of 5.98N and can handle 2A@36VDC DC max rating R load. Ideal for panel mount applications, this switch type is commonly used in electronic devices requiring momentary switch action.
BUTTON TYPE
19.6 mm
15.3 mm
2A@36VDC
36 V
GREEN LED
5.98 N
Gold Flash (Au)
MPI002/28/GN/12
Bulgin
The Bulgin MPI002/28/GN/12 is a pushbutton switch with an electrical life of 35k cycles. It features a green LED illumination and has an IP66 sealing rating. This switch is commonly used in panel mount applications and can handle a max DC contact voltage of 24V.
22 mm
.05 A
.05A@24VDC
35000 Cycle(s)
PANEL MOUNT-THREADED
IP66
MOMENTARY-TACTILE
9001K2L35LRRH13
PUSHBUTTON SWITCH;
9001K3L35LGGH13
9001K3L38LRRH13
9001KR25BH13
9001KR3RH6
XB5AA4322
APW199D-R-24V
Idec
AVW411-R
AV1610P712R04
TE Connectivity
TE Connectivity's AV1610P712R04 is a SPST pushbutton switch with blue LED illumination and gold flash terminal finish. With an electrical life of 200,000 cycles, it is ideal for applications requiring momentary switch action in harsh environments due to its IP67 sealing and polybutylene terephthalate housing material.
13.8 mm
16 inch
.4 A
BLUE LED
1
6 N
EPOXY TERMINAL SEALED; IP67
WIRE
AV2520M124Q04
TE Connectivity's AV2520M124Q04 is a DPST pushbutton switch with max AC contact current of 3A and voltage of 250V. Made of POLYBUTYLENE TEREPHTHALATE, it features COPPER ALLOY end contact material and SILVER plating. Ideal for PANEL MOUNT applications requiring reliable switching in electrical circuits.
3 A
DPST
18235WCDX386
Apem Components
18235WCDX386 by Apem Components is a SPDT pushbutton switch with long plunger actuator. It has an electrical life of 60000 cycles, sealed with epoxy terminals, and operates b/w -30 to 65°C. Ideal for applications requiring momentary-tactile switch action in environments where sealing and durability are crucial.
LONG PLUNGER
PANEL MOUNTABLE
12.7 inch
7 mm
13.2 mm
.1A@30VDC
60000 Cycle(s)
THROUGH HOLE-RIGHT ANGLE
65 Cel
EPOXY TERMINAL SEALED
PB6B2HS3M1CAL00Y500
TE Connectivity's PB6B2HS3M1CAL00Y500 is a red pushbutton switch with SPST function. It has max AC contact current of 0.12A and DC contact voltage of 50V, making it suitable for panel mount applications requiring reliable switching capabilities. The switch features gold over silver center contact plating and polyamide actuator material, ensuring durability in various industrial settings.
POLYAMIDE
.12 A
50 V
DIALLYL PHTHALATE
BULK
PB6B2FM3M1CAL00S500
TE Connectivity's PB6B2FM3M1CAL00S500 is a red SPST pushbutton switch with max AC contact current of 0.12A and DC contact voltage of 50V. Featuring gold over silver plating, it is ideal for panel mount applications requiring a reliable 0.12A current at 125V AC or 50V DC.
A3CJ-7011
Omron A3CJ-7011 Pushbutton Switch has DPST switch function with 100000 cycles electrical life. Sealed to IP40, it operates b/w -10°C to 55°C. Ideal for panel mounting applications, it supports 1A@125VAC AC and 1A@30VDC DC contact current loads.
RECTANGULAR TYPE
SOCKET MOUNTABLE
20 mm
12 mm
1A@125VAC
1 A
1A@30VDC
2.45 N
-10 Cel
IP40
HW1B-V4F01-R
HW1B-V4F01-R by Idec is a red pushbutton switch with SPST function and gold-plated contacts. It has an electrical life of 10M cycles, sealing ratings of IP20, IP40, and IP65. Ideal for applications requiring momentary switch action in environments with temperatures ranging from -25°C to 50°C.
ROUND TYPE
(ON)-OFF
10000000 Cycle(s)
50 Cel
IP20; IP40; IP65
MP0016
The Bulgin MP0016 is a black pushbutton switch with brass terminals, SPST switch function, and silver end contact plating. With an insulation resistance of 10^10 ohm, it is ideal for applications requiring momentary switch action at temperatures ranging from -20 to 85 °C. Suitable for panel mounting, this button-type switch has a max AC/DC contact current of 1A@28V and dielectric withstand voltage of 2000VAC.
.252 inch
GLASS FILLED NYLON
18.3 mm
9.9 mm
.126 inch
1A@28VAC
1A@28VDC
15 mohm
28 V
IPR3SAD2L0G
IPR3SAD2L0G by Apem Components is a SPST pushbutton switch with GREEN LED illumination. It has an electrical life of 70k cycles, sealed with EPOXY and rated IP67/IP68K for rugged environments. Ideal for panel mounting applications requiring momentary-tactile switch action in temperatures ranging from -40 to 85°C.
ROUND CURVED TYPE
6.4 mm
.5A@48VAC
.5 A
5 A
5A@28VDC
70000 Cycle(s)
8 N
EPOXY TERMINAL SEALED; IP67; IP68K
PV6H24011-3R1
PVT4FS4SS344
© 2023 All rights reserved
