Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
PDB181-K415K-203A4
Bourns
POTENTIOMETER; Resistance: 20000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %; Technology: CARBON;
Rotary
e3
PDB18
50 Cel
-10 Cel
17 mm
9.5 mm
Panel Mount
.1 W
20000 ohm
POTENTIOMETER
300 deg
CARBON
TIN
20 %
150 V
PDB183-GTR03-254B0
POTENTIOMETER; Mounting Type: CHASSIS MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
VERTICAL
SHAFT
Round
1
CHASSIS MOUNT
3
26.2 mm
CYLINDRICAL PACKAGE
.2 W
250000 ohm
LINEAR
FLAT
PDB183-GTR11-504A2
The Bourns PDB183-GTR11-504A2 is a 500000 ohm potentiometer with 20% tolerance, suitable for audio applications. It has a cylindrical package, vertical actuator orientation, and operates b/w -10 to 50 °C. With a rated power dissipation of 0.1 W and operating voltage of 200 V, it is ideal for panel mount installations in various electronic devices.
500000 ohm
AUDIO
LUG
200 V
PDB183-GTR22-504A2
Bourns PDB183-GTR22-504A2 is a 500k ohm potentiometer with 20% tolerance, suitable for audio applications. It has a rated power dissipation of 0.1W and operates at temperatures from -10 to 50°C. The cylindrical package with vertical orientation and lug terminals make it ideal for panel mount in chassis setups.
2
6
3269W-11-103LF
Bourns 3269W-11-103LF is a CERMET variable resistor with 10000 ohm resistance, 10% tolerance, and 0.25 W power dissipation. Ideal for SMT applications, it operates b/w -65 to 150 °C and can handle up to 300 V.
Rectangular
150 Cel
-65 Cel
7.44 mm
6.35 mm
SMT
4.32 mm
Tube
.25 W
10000 ohm
TRIMMER
4320 deg
2517
Variable Resistors
CERMET
100
Matte Tin (Sn)
10 %
300 V
3314H-1-503
Bourns 3314H-1-503 is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 20% tolerance. Ideal for PCB mounting applications, it has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C.
SCREW
3314
SURFACE MOUNT
125 Cel
-55 Cel
2.55 mm
5 mm
RECTANGULAR PACKAGE
PCB Mount
4.5 mm
TUBE
70 Cel
50000 ohm
240 deg
2018
3314S-1-202E
Bourns 3314S-1-202E is a CERMET trimmer resistor with 2000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in surface mount applications for temperature compensation circuits due to its linear law of resistance and wide operating temperature range (-55 to 125 °C).
HORIZONTAL
5.61 mm
5.01 mm
TR, EMBOSSED, 7 INCH
AEC-Q200
2000 ohm
210 deg
J BEND
3314S-3-201E
Bourns 3314S-3-201E is a CERMET variable resistor with 200 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
200 ohm
MATTE TIN
3386C-1-205LF
Bourns 3386C-1-205LF is a linear trimmer resistor with 2000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The screw-type actuator allows precise adjustments with a rotation angle of 280°.
.51 mm
5.97 mm
THROUGH HOLE MOUNT
9.53 mm
4.83 mm
.5 W
85 Cel
2000000 ohm
280 deg
WIRE
3386F-1-101TLF
Bourns 3386F-1-101TLF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range (-55 to 125 °C) and low temp coefficient (100 ppm/°C).
KNOB
100 ohm
3386F-1-102TLF
Bourns 3386F-1-102TLF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with linear resistance law and 280° rotation angle.
1000 ohm
3386F-1-104TLF
Bourns 3386F-1-104TLF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125°C. Features linear resistance law and vertical actuator orientation for precise adjustments.
100000 ohm
3386F-1-201TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386F-1-204TLF
Bourns 3386F-1-204TLF is a linear cermet trimmer resistor with 200k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its wide operating range from -55°C to 125°C. Features vertical actuator orientation and knob type for precise adjustments.
200000 ohm
3386P-1-101TLF
Bourns 3386P-1-101TLF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a temperature coefficient of 100 ppm/°C and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3386P-1-103T
Bourns 3386P-1-103T is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has linear resistance law, operates b/w -55 to 125 °C, and features a vertical actuator for PCB mounting applications.
e0
Tin/Lead (Sn80Pb20)
3386P-1-104TLF
Bourns 3386P-1-104TLF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its linear law of resistance and wide operating temperature range (-55 to 125°C).
3386P-1-203TLF
The Bourns 3386P-1-203TLF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications where precise resistance adjustments are required.
3386P-1-502TLF
Bourns 3386P-1-502TLF is a linear cermet trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a vertical actuator orientation and is suitable for PCB mounting applications. With an operating temperature range of -55 to 125 °C, it offers precise resistance adjustment in various electronic circuits.
5000 ohm
3386P-1-502T
Bourns 3386P-1-502T is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its linear law of resistance and wide operating temperature range (-55 to 125 °C).
3386U-1-104RLF
Bourns 3386U-1-104RLF is a CERMET trimmer resistor with 100k ohm resistance, linear law, and 10% tolerance. Ideal for PCB mounting applications, it has a max operating temperature of 125°C and an actuator type of screw. The resistor's compact design features a through-hole mount with three terminals in a rectangular package style.
3386X-1-105TLF
Bourns 3386X-1-105TLF is a linear trimmer resistor with 1000000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature compensation circuits due to its 85 to 125 °C operating range and low temp coef of 100 ppm/°C.
1000000 ohm
3386X-1-204TLF
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3386X-1-503TLF
Bourns 3386X-1-503TLF is a CERMET trimmer resistor with 50000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for precise resistance adjustments in electronic circuits. With linear law of resistance and 280° rotation angle, it offers reliable performance from -55 to 125 °C temperatures.
PTL30-15G1-103B1
Bourns PTL30-15G1-103B1 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.05 W power dissipation. It has a rectangular package for PCB mount applications with slide actuator type. Operating temperature range from -10 to 55 °C makes it suitable for various electronic devices.
SLIDE
55 Cel
7 mm
45 mm
9 mm
.05 W
PTL60-15O1-103B2
PTL60-15O1-103B2 by Bourns is a linear carbon potentiometer with a resistance of 10000 ohm. It has a rated temperature of 70°C and can be mounted through hole. This variable resistor is commonly used in PCB applications for precise voltage control.
75 mm
PTL60-15R1-103B2
Bourns PTL60-15R1-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It has a slide actuator and PCB mount package style for applications in electronic circuits requiring precise resistance adjustments.
3540S-1-101L
Bourns 3540S-1-101L is a 100 ohm wire wound potentiometer with 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125°C. Ideal for panel mount applications, offering precise resistance control in various electronic circuits.
Bushing Mount
e4
3540
-40 Cel
22.23 mm
19.05 mm
2 W
3600 deg
WIRE WOUND
50
Gold (Au)
5 %
3548S-1AG-103A
Bourns 3548S-1AG-103A is a wire wound POTENTIOMETER with 10000 ohm resistance, 3% tolerance, and 1.5 W power dissipation. It has a cylindrical package for panel mount applications, operating b/w -55 to 125 °C. Ideal for precise control in electronic circuits requiring high temperature stability.
3548
22.479 mm
19.812 mm
Tray
1.5 W
1800 deg
3 %
3549S-1AG-103A
Bourns 3549S-1AG-103A is a 10000 ohm POTENTIOMETER with 3% tolerance, rated at 2W power dissipation. Its wire wound technology and cylindrical package make it ideal for panel mount applications. With a wide operating temperature range of -55 to 125 °C, it offers precise resistance control in various electronic devices.
3549
96A1A-B24-B15L
Bourns 96A1A-B24-B15L is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 1W power dissipation. It has a shaft actuator, through-hole mounting, and operates b/w -40°C to 125°C. Ideal for PCB applications requiring precise voltage control in limited space.
.76 mm
15.29 mm
17.45 mm
15.88 mm
12.95 mm
1 W
CONDUCTIVE PLASTIC
1000
96R1A-R16-A15L
The Bourns 96R1A-R16-A15L is a linear cermet potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It is PCB mountable and suitable for applications requiring precise resistance adjustments in a compact through-hole package. With an operating temperature range of -40 to 125°C, it offers reliable performance in various electronic circuits.
Sealed
150
TIN OVER COPPER
81A1A-B28-A10/L
Bourns 81A1A-B28-A10/L is a linear potentiometer with 3 terminals, rated for temperatures from -40 to 125 °C. With a 2W power dissipation and 240° rotation angle, it's ideal for PCB mount applications requiring precise resistance adjustments in a compact package.
12.7 mm
81A1A-B28-A13/L
Bourns 81A1A-B28-A13/L is a linear potentiometer with 10% tolerance, 2W power dissipation, and 240° rotation angle. Ideal for PCB mounting applications in temperature range of -40 to 125°C. Features cermet technology and through-hole mounting style.
81A1A-B28-A15/L
Bourns 81A1A-B28-A15/L is a linear potentiometer with 10% tolerance, 2W power dissipation, and 240° rotation angle. It is used in applications requiring precise resistance adjustments such as audio equipment and industrial controls. With a temperature coefficient of 150 ppm/°C, it operates b/w -40°C to 125°C for reliable performance.
82A1A-B28-A13/L
Bourns 82A1A-B28-A13/L is a linear cermet potentiometer with 3 terminals, rated at 2W power dissipation. With an operating temperature range of -40 to 125°C and a resistance tolerance of 10%, it is ideal for panel mount applications requiring precise resistance adjustments in a compact package.
PANEL MOUNT
HOOK
82A2A-B28-A15/A15L
The Bourns 82A2A-B28-A15/A15L is a CERMET POTENTIOMETER with linear resistance law, 10000 ohm resistance, and 10% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Square
PCB MOUNT
26.04 mm
82R1A-R22-A13/L
POTENTIOMETER; Mounting Type: PANEL MOUNT; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Minimum Operating Temperature: -40 Cel;
91A1A-B24-B18L
Bourns 91A1A-B24-B18L is a linear conductive plastic potentiometer with 50000 ohm resistance, suitable for panel mount applications. It has an operating temperature range of -40 to 125 °C and a rated power dissipation of 1 W. The potentiometer features a shaft actuator, flat terminals, and offers a rotation angle of 240°.
22.86 mm
Tin (Sn)
91A1A-B24-D15L
Bourns 91A1A-B24-D15L is a 10000 ohm potentiometer with 20% tolerance, rated at 0.5W power dissipation. Featuring conductive plastic technology, it has an audio law of resistance and operates b/w -40 to 125 °C. Ideal for panel mount applications due to its rectangular construction and horizontal actuator orientation.
225 deg
91A1A-B24-D20L
The Bourns 91A1A-B24-D20L is a 100k ohm potentiometer with a 20% tolerance and 0.5W power dissipation. Featuring conductive plastic technology, it has an audio law of resistance and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in horizontal orientation.
91A1A-B28-A10L
The Bourns 91A1A-B28-A10L is a linear cermet potentiometer with 1000 ohm resistance, 10% tolerance, and 2W power dissipation. It operates b/w -40 to 125 °C and has a temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
91A1A-B28-A13L
The Bourns 91A1A-B28-A13L is a CERMET POTENTIOMETER with 5000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a linear law of resistance and operates b/w -40°C to 125°C. Ideal for panel mount applications requiring precise voltage or current control.
91A1A-B28-A25L
The Bourns 91A1A-B28-A25L is a CERMET POTENTIOMETER with 1000000 ohm resistance, 10% tolerance, and 2 W power dissipation. It has a linear law of resistance and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
91A1A-B28-B10L
The Bourns 91A1A-B28-B10L is a linear conductive plastic potentiometer with 1000 ohm resistance, suitable for panel mount applications. It has an operating temperature range of -40 to 125 °C and a rated power dissipation of 1 W. The potentiometer features a shaft actuator, horizontal orientation, and flat terminal shape, making it ideal for precise control in various electronic devices.
91A1A-B28-D10L
The Bourns 91A1A-B28-D10L is a 1000 ohm potentiometer with a 20% tolerance and rated power dissipation of 0.5 W. It features conductive plastic technology, an audio law of resistance, and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in horizontal orientation.
91A1A-B28-D15L
Bourns 91A1A-B28-D15L is a 10000 ohm potentiometer with 20% tolerance, suitable for audio applications. Constructed with conductive plastic technology, it has a rated power dissipation of 0.5W and operates b/w -40 to 125 °C. Its horizontal orientation and shaft actuator make it ideal for panel mount installations.
91A1A-G28-B13L
The Bourns 91A1A-G28-B13L is a 5000 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 1W and an angle of rotation of 240°, making it ideal for panel mount applications requiring precise resistance adjustments in a temperature range from -40°C to 125°C.
© 2023 All rights reserved
