Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
B07D692BZ2-0011
TE Connectivity
TE Connectivity's B07D692BZ2-0011 is a DPDT-CO power/signal relay with 2 FORM C configuration. With operate time of 15ms, it has max AC contact current of 10A@115VAC and DC coil operate voltage of 13V. Ideal for applications requiring momentary relay action in hermetically sealed environments.
Power/Signal Relay
DPDT-CO
Momentary
2 Form C
Random
DC
AC/DC
10 A
115 V
5A@115VAC
28 V
10A@28VDC
2.34 W
300 Ω
26.5 V
88 mA
13 V
2.3 V
1.01 in (25.65 mm)
1.025 in (26.03 mm)
13.33 in (338.582 mm)
1.025 x 0.525 x 1.01 in (26.03 x 13.33 x 25.65 mm)
Panel Mount
8
0.311 in (7.899 mm)
15 ms
-65 °C (-85 °F)
125 °C (257 °F)
Silver Cadmium Oxide
Solder
M39016
Hermetically Sealed
50000 Cycle(s)
B07D934BC2-0052
TE Connectivity's B07D934BC2-0052 is a DPDT-CO power/signal relay with 2 FORM C configuration. It operates at 15ms, has a hermetically sealed body, and can handle up to 10A@28VDC. Ideal for applications requiring momentary relay action in harsh environments.
2.341 W
7 V
0.1969 in (5.001 mm)
Socket Mountable
HFW1201G01
TE Connectivity's HFW1201G01 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -65 to 125 °C, with max DC coil current of 0.075 A and AC contact current of 2 A. Ideal for applications requiring hermetically sealed, momentary relay action in AC/DC circuits.
2 A
900 mW
160 Ω
12 V
75 mA
HFW1201K45P
TE Connectivity's HFW1201K45P is a DPDT-CO power/signal relay with 2 FORM C configuration. With operate time of 4ms, it has max AC contact current of 2A@28VDC and hermetically sealed body. Ideal for applications requiring momentary relay action in harsh environments.
2A@28VDC
1.003 W
700 Ω
38 mA
13.5 V
8 V
0.41 in (10.41 mm)
0.81 in (20.57 mm)
10.41 in (264.414 mm)
0.81 x 0.41 x 0.41 in (20.57 x 10.41 x 10.41 mm)
0.1575 in (4 mm)
4 ms
1 GΩ
HFW1201K46
TE Connectivity's HFW1201K46 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed for durability, it has a max operating temp of 125°C and coil resistance of 700 ohm. Ideal for AC/DC applications in harsh environments requiring momentary relay action.
J1MAC-12XLS
TE Connectivity's J1MAC-12XLS is a 1 FORM C SPST-CO power/signal relay with hermetically sealed body. It operates at 12V, has 11 terminals, and can handle up to 1A@28VDC. Ideal for panel mounting applications requiring momentary relay action with fast 2ms operate/release time.
SPST-CO
1 Form C
1 A
1A@28VDC
288 mW
500 Ω
24 mA
4 V
0.398 in (10.1 mm)
0.37 in (9.4 mm)
9.4 in (238.76 mm)
0.37 x 0.37 x 0.398 in (9.4 x 9.4 x 10.1 mm)
11
0.3543 in (8.999 mm)
2 ms
Solder/Quick Connect
100000 Cycle(s)
JMGAP-26L
TE Connectivity's JMGAP-26L is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65 to 125 °C and supports max DC contact current of 1A. Ideal for AC/DC applications, this relay features momentary action and panel mount installation.
450 mW
1.56 kΩ
17 mA
JMSWD-5XM
TE Connectivity's JMSWD-5XM is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed for reliability, it has a max operating temperature of 125°C and coil resistance of 100 ohm. Ideal for panel mounting applications requiring momentary relay action with AC/DC supply types up to 28V and current ratings up to 1A.
250 mW
100 Ω
5 V
50 mA
With Coil Suppression Diode
3SBC1527A2
TE Connectivity's 3SBC1527A2 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -65 to 125 °C, with max DC coil current of 0.02 A and AC contact current of 2 A. Ideal for panel mounting applications requiring hermetically sealed, momentary relay action.
520 mW
1.35 kΩ
20 mA
JMAW-26XP
TE Connectivity's JMAW-26XP is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed for reliability, it operates b/w -65 to 125°C, handling up to 1A AC/DC current at 28V. Ideal for applications requiring momentary relay action and panel mounting.
KHU-17A11-120
TE Connectivity's KHU-17A11-120 is a 4PDT power/signal relay with a 102V AC coil operate voltage. It has a max contact rating of 3A@120VAC and is suitable for panel mounting applications.
4PDT
4 Form C
AC
2.5 A
240 V
3A@120VAC
3A@28VDC
1.2 W
3.9 kΩ
10 mA
120 V
102 V
1.5 in (38.1 mm)
1.11 in (28.2 mm)
21.8 in (553.72 mm)
1.11 x 0.858 x 1.374 in (28.2 x 21.8 x 34.9 mm)
45 g
14
0.2362 in (5.999 mm)
Tray
13 ms
6 ms
50 °C (122 °F)
70 °C (158 °F)
1.5 kVrms
1 kVrms
100 MΩ
Silver
CSA; UL
Dust Proof
KHU-17A12-120
TE Connectivity's KHU-17A12-120 is a 4PDT power/signal relay with 4 FORM C configuration. With insulation resistance of 100MΩ, it operates b/w -50°C to +70°C and supports AC/DC supply type. Ideal for panel mounting applications, this relay has max AC contact current of 5A and coil resistance of 3900Ω.
5 A
KUMP-11D18-24
TE Connectivity's KUMP-11D18-24 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 18V AC coil voltage and has a max contact current of 15A. This dust-proof relay is commonly used in panel mount applications for its momentary action and high electrical life of 10,000 cycles.
DPDT
15 A
277 V
15A@277VAC
15A@28VDC
1.25 W
472 Ω
24 V
18 V
1.969 in (50 mm)
1.531 in (38.9 mm)
35.7 in (906.78 mm)
1.531 x 1.406 x 1.906 in (38.9 x 35.7 x 48.4 mm)
85 g
10 ms
55 °C (131 °F)
2.2 kVrms
1.2 kVrms
10000 Cycle(s)
V23057A13A401
TE Connectivity's V23057A13A401 is a SPDT power/signal relay with 8A AC contact current and 8A DC contact current. With a coil resistance of 4700 ohm, it operates at 32V DC and has a max coil voltage of 48V DC. This relay, measuring 28mm x 25mm x 10.8mm, is ideal for applications requiring momentary relay action in power and signal systems.
SPDT
8 A
490 mW
4.7 kΩ
48 V
32 V
4.8 V
0.425 in (10.8 mm)
1.102 in (28 mm)
25 in (635 mm)
1.102 x 0.984 x 0.425 in (28 x 25 x 10.8 mm)
Through Hole-Straight Mount
UL; VDE
4-1393243-2
TE Connectivity 4-1393243-2 is a DPDT relay with 2 FORM C, operate time of 10ms, and electrical life of 30k cycles. Ideal for power applications, it has a max AC contact current of 8A@400VAC and operates b/w -70°C to +85°C temperatures.
400 V
8A@400VAC
400 mW
1.44 kΩ
16.8 V
2.4 V
0.618 in (15.7 mm)
1.142 in (29 mm)
12.7 in (322.58 mm)
1.142 x 0.5 x 0.618 in (29 x 12.7 x 15.7 mm)
13 g
Box; Tube
5 ms
85 °C (185 °F)
5 kVrms
Silver Tin Alloy
BEAB; CSA; UL; VDE
RT2
30000 Cycle(s)
9-1393243-1
TE Connectivity 9-1393243-1 is a DPDT relay with 2 FORM C, rated for 30k cycles. With max AC contact current of 8A@400VAC, it's ideal for power & signal applications. Featuring sealing rating RT2 and coil resistance of 350Ω, this relay operates b/w -50°C to +70°C.
760 mW
350 Ω
32 mA
Silver Nickel
Coil Operate Voltage (AC): 18 V, Coil Release Voltage (AC): 3.6 V
4-1393236-2
TE Connectivity's 4-1393236-2 is a SPDT power/signal relay with a 1 FORM C form. It has an operate time of 10 ms and can handle a max AC contact current of 6A@240VAC. This relay is commonly used in applications requiring momentary relay action, such as panel mounting in power and signal systems.
6 A
6A@240VAC
176 mW
20.5 kΩ
60 V
3 mA
42 V
3 V
0.591 in (15 mm)
5 in (127 mm)
1.102 x 0.197 x 0.591 in (28 x 5 x 15 mm)
6 g
7.5 ms
Silver Tin Oxide
EN; IEC; UL; VDE
RT3
5-1415026-1
TE Connectivity 5-1415026-1 is a 4PDT power/signal relay with 4 FORM C configuration. It operates at -40 to 70°C, has a coil resistance of 777 ohm, and can handle up to 6A@240VAC. Ideal for AC applications requiring momentary relay action in various industries.
1500VA@400VAC
759 mW
777 Ω
31 mA
22.5 in (571.5 mm)
1.1 x 0.89 x 1.14 in (28 x 22.5 x 29 mm)
30 g
23 ms
-40 °C (-40 °F)
2 kVrms
Gold
Release Time with Diode
5-1419111-1
TE Connectivity 5-1419111-1 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 23ms, has a max AC contact current of 12A@400VAC, and can withstand temperatures from -40 to 70°C. Ideal for applications requiring momentary relay action in power systems.
12 A
12A@400VAC
3000VA@400VAC
1 W
19.465 kΩ
184 V
69 V
4 mA
230 V
2.5 kVrms
Coil Operate Voltage (AC): 207 V, Coil Release Voltage (AC): 69 V, Release Time with Diode
9-1415039-1
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 3PDT; Coil or Input Supply Type: AC; Reference Standard: UL; VDE;
3PDT
3 Form C
10A@400VAC
2500VA@400VAC
4.845 kΩ
92 V
34.5 V
9 mA
Coil Operate Voltage (AC): 103.5 V, Coil Release Voltage (AC): 34.5 V; Release Time with Diode
SRUDH-SS-112D1,000
TE Connectivity's SRUDH-SS-112D1,000 is a SPDT power/signal relay with 15ms operate time and 100000 cycle electrical life. Ideal for applications requiring momentary relay action, it has a max AC contact current of 10A@240VAC and operates at temperatures ranging from -30 to 60°C.
10A@240VAC
360 mW
400 Ω
30 mA
9 V
1.2 V
0.795 in (20.2 mm)
16.5 in (419.1 mm)
0.795 x 0.65 x 0.795 in (20.2 x 16.5 x 20.2 mm)
-30 °C (-22 °F)
60 °C (140 °F)
CSA; TUV; UL
Flux Free Sealed
6-1393231-5
TE Connectivity 6-1393231-5 is a SPST power/signal relay with 10ms operate time and 50000 cycles electrical life. It has a max AC contact current of 16A@400VAC, making it suitable for applications requiring momentary relay action in industrial equipment and machinery.
SPST
16 A
16A@400VAC
533 mW
270 Ω
44 mA
1.004 in (25.5 mm)
12.6 in (320.04 mm)
1.142 x 0.496 x 1.004 in (29 x 12.6 x 25.5 mm)
Bulk
35 °C (95 °F)
KUHP-11A51-24
TE Connectivity's KUHP-11A51-24 is a DPDT relay with 2 FORM C, 20ms operate time, and 100000 cycle electrical life. Ideal for power applications, it has a max AC contact rating of 20A@240VAC and operates at temperatures ranging from 0 to 45°C. With sealing against dust, this relay offers reliable performance in various industrial settings.
20 A
20A@240VAC
20A@28VDC
2.7 W
72 Ω
113 mA
1.406 in (35.7 mm)
38.9 in (988.06 mm)
92 g
20 ms
0 °C (32 °F)
45 °C (113 °F)
3.75 kVrms
Coil Operate Voltage (AC): 20.4 V
KUHP-11AT1-120
TE Connectivity's KUHP-11AT1-120 is a DPDT power/signal relay with 2 FORM C configuration. With AC coil operate voltage of 102V, it offers max contact ratings of 20A@240VAC and 20A@28VDC. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
200 mΩ
1.7 kΩ
23 mA
2.461 in (62.5 mm)
35.4 in (899.16 mm)
10
Coil Operate Voltage (AC): 102 V
KUHP-11D51-24
TE Connectivity's KUHP-11D51-24 is a DPDT relay with 2 FORM C, 20ms operate time, and 100000 cycle electrical life. Ideal for power applications, it offers a max AC contact current of 20A@240VAC and operates at temperatures b/w 50 to 70°C. Suitable for panel mounting, this relay has a compact size of 38.9mm x 35.7mm x 48.4mm and weighs only 92g.
1.23 W
KUHP-11DT1-12
TE Connectivity's KUHP-11DT1-12 is a DPDT power/signal relay with 2 FORM C, 20A@240VAC contact rating. Operating at -50 to 70°C, it has a 9V DC coil voltage and quick connect termination. Ideal for panel mounting applications requiring momentary relay action in dustproof environments.
120 Ω
100 mA
KUHP-11DT1-24
TE Connectivity's KUHP-11DT1-24 is a DPDT power/signal relay with 2 FORM C configuration. With 20A@240VAC max contact AC rating, it operates at -50 to 70°C and has a coil resistance of 472 ohm. Ideal for panel mounting applications requiring momentary relay action.
0.248 in (6.299 mm)
KUHP-5A51-120
TE Connectivity's KUHP-5A51-120 is a SPDT power/signal relay with 1 FORM C configuration. It has an operate time of 20ms, electrical life of 100k cycles, and insulation resistance of 100M ohm. With a max AC contact rating of 30A@240VAC, it is ideal for applications requiring momentary relay action in dust-proof environments.
30 A
30A@240VAC
30A@28VDC
KUHP-5AT1-120
TE Connectivity's KUHP-5AT1-120 is a SPDT power/signal relay with 20ms operate time and 100000 cycle electrical life. With 30A@240VAC max contact AC rating, it's ideal for applications requiring momentary relay action in dust-proof environments. Operating temperatures range from 0 to 45°C, making it versatile for various industrial settings.
KUHP-5D51-12
TE Connectivity's KUHP-5D51-12 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 9V DC, has a max AC contact current of 30A@240VAC, and offers dust-proof sealing. Ideal for applications requiring momentary relay action in environments with temperatures ranging from 50 to 70°C.
KUHP-5D51-24
TE Connectivity's KUHP-5D51-24 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 20ms, has an electrical life of 100k cycles, and offers dust-proof sealing. Ideal for applications requiring momentary relay action, it can handle up to 30A@240VAC and features a compact design measuring 38.9mm x 35.7mm x 48.4mm.
KUHP-5DT1-24
TE Connectivity's KUHP-5DT1-24 is a SPDT power/signal relay with 20ms operate/release time, 100000 cycle electrical life, and 30A@240VAC contact rating. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
1-1419108-1
TE Connectivity 1-1419108-1 is a SPDT power/signal relay with 8ms operate time. It has 16A@400VAC max contact AC rating and operates b/w -50 to 70°C. Ideal for applications requiring momentary relay action in various industries.
740 mW
32.5 kΩ
14 g
8 ms
6000 Cycle(s)
Coil Operate Voltage (AC): 172.5 V, Coil Release Voltage (AC): 34.5 V
2-1415366-1
TE Connectivity 2-1415366-1 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 20ms, has IP20 sealing, and can handle up to 12A@400VAC. Ideal for AC applications in panels due to its compact size of 73.5mm x 27mm x 58mm and weight of 71g.
2.283 in (58 mm)
2.894 in (73.5 mm)
27 in (685.8 mm)
2.894 x 1.063 x 2.283 in (73.5 x 27 x 58 mm)
71 g
Box
IP20
Coil Operate Voltage (AC): 92 V, Coil Release Voltage (AC): 34.5 V
4-1415075-1
TE Connectivity 4-1415075-1 is a 4PDT power/signal relay with 20ms operate time. It has a max AC contact current of 6A@240VAC and operates at temperatures b/w 50-70°C. Ideal for applications requiring momentary relay action in panel-mounted setups.
Coil Operate Voltage (AC): 184 V, Coil Release Voltage (AC): 69 V
9-1415075-1
TE Connectivity 9-1415075-1 is a 4PDT power/signal relay with 20ms operate time. It has a max AC contact current of 6A@240VAC and operates at temperatures b/w 50°C to 70°C. Ideal for applications requiring momentary relay action, it offers high dielectric strength and panel mounting feature.
750 mW
192 Ω
63 mA
1-1414939-4
TE Connectivity 1-1414939-4 is a SPST power/signal relay with IP54 sealing. It has a max AC contact current of 190A@12VDC and operates at temperatures ranging from 105°C to 120°C. Ideal for applications requiring latched relay action in harsh environments.
Latched
190 A
88A@12VDC
7 W
4.7 Ω
2.55 A
6 V
1.299 in (33 mm)
1.457 in (37 mm)
60 in (1524 mm)
2.362 x 1.417 x 1.299 in (60 x 36 x 33 mm)
210 g
105 °C (221 °F)
120 °C (248 °F)
500 Vrms
Connector
IP54
7-1414778-3
TE Connectivity 7-1414778-3 is a SPST power/signal relay with IP54 sealing. It has a max AC contact current of 190A@24VDC and operates at temperatures ranging from 105°C to 120°C. Ideal for applications requiring reliable switching in harsh environments.
88A@24VDC
19.9 Ω
1.21 A
25000 Cycle(s)
3-1415535-8
TE Connectivity 3-1415535-8 is a SPST power/signal relay with 1 FORM A configuration. It operates at 14ms, has an electrical life of 100k cycles, and insulation resistance of 10G ohm. Ideal for applications requiring momentary relay action in AC supply systems up to 400VAC with a max contact current of 5A.
1 Form A
5A@400VAC
6.4 kΩ
8 mA
36 V
0.472 in (12 mm)
0.815 in (20.7 mm)
10.7 in (271.78 mm)
0.815 x 0.421 x 0.472 in (20.7 x 10.7 x 12 mm)
5 g
14 ms
9 ms
3 kVrms
10 GΩ
1393203-8
TE Connectivity 1393203-8 is a SPDT power/signal relay with 1 FORM C form factor. It operates at -25 to 70°C, with a coil resistance of 320 ohm and max AC contact current of 7A@400VAC. Ideal for applications requiring momentary relay action in panels, it offers dielectric strength up to 2000 Vrms b/w coil & contacts.
7 A
7A@400VAC
320 Ω
8.4 V
0.587 in (14.9 mm)
0.835 in (21.2 mm)
16.2 in (411.48 mm)
0.835 x 0.638 x 0.587 in (21.2 x 16.2 x 14.9 mm)
9 g
3 ms
-25 °C (-13 °F)
UL
1419126-1
TE Connectivity 1419126-1 is a SPST power/signal relay with 15ms operate time. It has 10A@250VAC max contact AC rating and operates at temperatures b/w 50°C to 70°C. Ideal for applications requiring momentary relay action in various industries.
250 V
10A@250VAC
30 V
10A@30VDC
540 mW
1.067 kΩ
0.984 in (25 mm)
0.945 in (24 mm)
10 in (254 mm)
0.945 x 0.394 x 0.984 in (24 x 10 x 25 mm)
11 g
Tube
4 kVrms
CQC; TUV; UL; VDE
RT2; RT3
2-1393115-6
TE Connectivity 2-1393115-6 is a DPDT relay with 2 FORM C, operate time of 25ms, and electrical life of 100k cycles. Ideal for power applications with AC contact current up to 10A@240VAC, it has a compact size of 38.89mm x 35.71mm x 54.76mm and can be panel mounted for various industrial uses.
3.7 kΩ
2.157 in (54.8 mm)
1.531 x 1.406 x 2.156 in (38.89 x 35.71 x 54.76 mm)
96 g
Box; Tray
25 ms
RT1
5-1416200-5
TE Connectivity 5-1416200-5 is a SPST relay with 1 FORM A form factor, operate time of 13ms, and electrical life of 100k cycles. Ideal for applications requiring momentary relay action in power & signal systems with AC contact current up to 8A@250VAC.
218 mW
165 Ω
36 mA
4.1 V
600 mV
1.126 in (28.6 mm)
1.126 x 0.394 x 0.591 in (28.6 x 10 x 15 mm)
9.2 g
CUL; UL; VDE
6-1393302-0
TE Connectivity 6-1393302-0 is a SPDT power/signal relay with 7ms operate time and 200000 cycles electrical life. With IP54/IP67 sealing, it's ideal for applications requiring momentary relay action, handling up to 60A@12VDC.
60 A
60A@12VDC
1.6 W
90 Ω
133 mA
7.2 V
1.6 V
0.98 in (24.9 mm)
1.02 in (25.9 mm)
25.9 in (657.86 mm)
1.02 x 1.02 x 0.98 in (25.9 x 25.9 x 24.9 mm)
35 g
7 ms
Silver Alloy
IP54; IP67; RT1; RT3
200000 Cycle(s)
5-1393292-8
TE Connectivity 5-1393292-8 is a SPST power/signal relay with 1 FORM A configuration. It has a max AC contact current of 30A@12VDC and operates at temperatures ranging from 105 to 125 °C. Ideal for applications requiring momentary relay action in IP54 sealed environments.
10A@12VDC
119 Ω
114 mA
1 in (25.4 mm)
0.906 in (23 mm)
15.5 in (393.7 mm)
0.906 x 0.61 x 1 in (23 x 15.5 x 25.4 mm)
16 g
5
0.4331 in (11.001 mm)
Snap-On
IP54; RT1
6-1393292-2
TE Connectivity 6-1393292-2 is a SPST power/signal relay with 1 FORM A configuration. It has a max AC contact current of 30A@24VDC and operates at temperatures b/w 105°C to 125°C. Ideal for applications requiring momentary relay action in harsh environments due to its IP54 sealing and compact dimensions of 23mm x 15.5mm x 25.4mm.
10A@24VDC
1.34 W
430 Ω
69 mA
14.4 V
3.6 V
2-1617030-8
TE Connectivity's 2-1617030-8 is a DPDT-CO power/signal relay with hermetically sealed sealing. It has a max operating temperature of 125°C and coil resistance of 160 ohm. Ideal for applications requiring momentary relay action, such as panel mounting in AC/DC circuits with up to 2A contact current.
2-1617122-1
TE Connectivity 2-1617122-1 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates in temperatures from -65 to 125 °C, with max DC contact current of 1 A and coil resistance of 50 ohm. Ideal for applications requiring hermetically sealed, momentary relay action in AC/DC circuits.
500 mW
50 Ω
© 2023 All rights reserved
