Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
6-1393116-4
TE Connectivity
TE Connectivity 6-1393116-4 is a DPDT power/signal relay with 2 FORM C, 15ms operate time, and 10000 cycles electrical life. Ideal for applications requiring momentary relay action in dust-proof environments with AC/DC supply needs.
Power/Signal Relay
DPDT
Momentary
2 Form C
AC
AC/DC
15 A
277 V
15A@277VAC
28 V
15A@28VDC
2.7 W
7.2 kΩ
11 mA
240 V
1.969 in (50 mm)
1.531 in (38.9 mm)
35.7 in (906.78 mm)
1.531 x 1.406 x 1.906 in (38.9 x 35.7 x 48.4 mm)
85 g
Panel Mount
15 ms
10 ms
50 °C (122 °F)
55 °C (131 °F)
2.2 kVrms
1.2 kVrms
100 MΩ
Silver Cadmium Oxide
Solder/Quick Connect
CSA; UL
Dust Proof
10000 Cycle(s)
Coil Operate Voltage (AC): 180 V
4-1393122-4
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
4PDT
4 Form C
DC
2.5 A
850 mW
650 Ω
24 V
38 mA
1.28 in (32.5 mm)
1.11 in (28.2 mm)
21.8 in (553.72 mm)
1.11 x 0.858 x 1.374 in (28.2 x 21.8 x 34.9 mm)
45 g
Tray
70 °C (158 °F)
1.5 kVrms
1 kVrms
Silver
8-1393116-5
TE Connectivity 8-1393116-5 is a 3PDT power/signal relay with 15A@277VAC contact rating. Operates at -45 to 0 °C, has 100000 cycle electrical life, and sealed for dust-proofing. Ideal for AC/DC applications requiring momentary relay action in compact spaces.
3PDT
3 Form C
72 Ω
113 mA
0 °C (32 °F)
45 °C (113 °F)
100000 Cycle(s)
Coil Operate Voltage (AC): 20.4 V
VFMA-15F41-S01
TE Connectivity's VFMA-15F41-S01 is a 1 FORM C SPDT power/signal relay with 100000 cycles electrical life. With a coil resistance of 80 ohm and max AC contact current of 25 A, it operates at temperatures ranging from -40 to 125°C. Ideal for panel mounting applications requiring momentary relay action.
SPDT
1 Form C
Random
25 A
1.81 W
80 Ω
12 V
151 mA
7.2 V
1.2 V
1 in (25.4 mm)
0.906 in (23 mm)
15.5 in (393.7 mm)
0.906 x 0.61 x 1 in (23 x 15.5 x 25.4 mm)
20 g
5
0.4331 in (11.001 mm)
-40 °C (-40 °F)
125 °C (257 °F)
500 Vrms
Silver Alloy
Quick Connect
KHU-17D12-24
TE Connectivity's KHU-17D12-24 is a 4PDT power/signal relay with 4 FORM C configuration. With an operate time of 13ms, it has a coil resistance of 650 ohm and can handle up to 5A AC contact current. Ideal for applications requiring momentary relay action, this dust-proof relay operates at temperatures b/w 50°C to 70°C and features SILVER CADMIUM OXIDE end contact material.
5 A
100 mΩ
18 V
1.5 in (38.1 mm)
14
0.1181 in (3 mm)
13 ms
6 ms
KHU-17A11-120
TE Connectivity's KHU-17A11-120 is a 4PDT power/signal relay with a 102V AC coil operate voltage. It has a max contact rating of 3A@120VAC and is suitable for panel mounting applications.
3A@120VAC
3A@28VDC
1.2 W
3.9 kΩ
10 mA
120 V
102 V
0.2362 in (5.999 mm)
KHU-17A12-120
TE Connectivity's KHU-17A12-120 is a 4PDT power/signal relay with 4 FORM C configuration. With insulation resistance of 100MΩ, it operates b/w -50°C to +70°C and supports AC/DC supply type. Ideal for panel mounting applications, this relay has max AC contact current of 5A and coil resistance of 3900Ω.
KUMP-11D18-24
TE Connectivity's KUMP-11D18-24 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 18V AC coil voltage and has a max contact current of 15A. This dust-proof relay is commonly used in panel mount applications for its momentary action and high electrical life of 10,000 cycles.
1.25 W
472 Ω
50 mA
8
0.1575 in (4 mm)
KUHP-11A51-24
TE Connectivity's KUHP-11A51-24 is a DPDT relay with 2 FORM C, 20ms operate time, and 100000 cycle electrical life. Ideal for power applications, it has a max AC contact rating of 20A@240VAC and operates at temperatures ranging from 0 to 45°C. With sealing against dust, this relay offers reliable performance in various industrial settings.
20 A
20A@240VAC
20A@28VDC
1.406 in (35.7 mm)
38.9 in (988.06 mm)
92 g
20 ms
3.75 kVrms
KUHP-11AT1-120
TE Connectivity's KUHP-11AT1-120 is a DPDT power/signal relay with 2 FORM C configuration. With AC coil operate voltage of 102V, it offers max contact ratings of 20A@240VAC and 20A@28VDC. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
200 mΩ
1.7 kΩ
23 mA
2.461 in (62.5 mm)
35.4 in (899.16 mm)
10
0.3543 in (8.999 mm)
Coil Operate Voltage (AC): 102 V
KUHP-11D51-24
TE Connectivity's KUHP-11D51-24 is a DPDT relay with 2 FORM C, 20ms operate time, and 100000 cycle electrical life. Ideal for power applications, it offers a max AC contact current of 20A@240VAC and operates at temperatures b/w 50 to 70°C. Suitable for panel mounting, this relay has a compact size of 38.9mm x 35.7mm x 48.4mm and weighs only 92g.
1.23 W
KUHP-11DT1-12
TE Connectivity's KUHP-11DT1-12 is a DPDT power/signal relay with 2 FORM C, 20A@240VAC contact rating. Operating at -50 to 70°C, it has a 9V DC coil voltage and quick connect termination. Ideal for panel mounting applications requiring momentary relay action in dustproof environments.
120 Ω
100 mA
9 V
KUHP-11DT1-24
TE Connectivity's KUHP-11DT1-24 is a DPDT power/signal relay with 2 FORM C configuration. With 20A@240VAC max contact AC rating, it operates at -50 to 70°C and has a coil resistance of 472 ohm. Ideal for panel mounting applications requiring momentary relay action.
0.248 in (6.299 mm)
KUHP-5A51-120
TE Connectivity's KUHP-5A51-120 is a SPDT power/signal relay with 1 FORM C configuration. It has an operate time of 20ms, electrical life of 100k cycles, and insulation resistance of 100M ohm. With a max AC contact rating of 30A@240VAC, it is ideal for applications requiring momentary relay action in dust-proof environments.
30 A
30A@240VAC
30A@28VDC
KUHP-5AT1-120
TE Connectivity's KUHP-5AT1-120 is a SPDT power/signal relay with 20ms operate time and 100000 cycle electrical life. With 30A@240VAC max contact AC rating, it's ideal for applications requiring momentary relay action in dust-proof environments. Operating temperatures range from 0 to 45°C, making it versatile for various industrial settings.
KUHP-5D51-12
TE Connectivity's KUHP-5D51-12 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 9V DC, has a max AC contact current of 30A@240VAC, and offers dust-proof sealing. Ideal for applications requiring momentary relay action in environments with temperatures ranging from 50 to 70°C.
KUHP-5D51-24
TE Connectivity's KUHP-5D51-24 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 20ms, has an electrical life of 100k cycles, and offers dust-proof sealing. Ideal for applications requiring momentary relay action, it can handle up to 30A@240VAC and features a compact design measuring 38.9mm x 35.7mm x 48.4mm.
KUHP-5DT1-24
TE Connectivity's KUHP-5DT1-24 is a SPDT power/signal relay with 20ms operate/release time, 100000 cycle electrical life, and 30A@240VAC contact rating. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
KUEP-11A15-120
TE Connectivity's KUEP-11A15-120 is a DPDT power/signal relay with 2 FORM C configuration. With an operate time of 15ms and electrical life of 100,000 cycles, it offers momentary relay action. Ideal for AC/DC applications, it has a max contact rating of 10A@240VAC and operates at temperatures ranging from 0 to 45°C.
10 A
10A@240VAC
150 V
10A@150VDC
1.906 in (48.4 mm)
KUEP-11D15-24
TE Connectivity's KUEP-11D15-24 is a DPDT power/signal relay with 2 FORM C configuration. It has an operate time of 15 ms and electrical life of 100,000 cycles. This relay, with a max AC contact current of 10A and DC coil voltage of 24V, is commonly used in applications requiring momentary relay action such as control systems and industrial automation.
1.8 W
320 Ω
75 mA
9
Box; Tray
KUEP-11D35-24
TE Connectivity's KUEP-11D35-24 is a DPDT power/signal relay with 2 FORM C configuration. With 15ms operate time, it has a max DC contact current of 10A@150VDC. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
KUEP-3D15-110
TE Connectivity's KUEP-3D15-110 is a SPST power/signal relay with 15ms operate time. It has 100000 cycles electrical life, 10A@240VAC max contact AC rating, and is dust-proof. Ideal for applications requiring momentary relay action in environments with temperatures ranging from 50 to 70°C.
SPST
1 Form X
10 kΩ
110 V
82.5 V
2.248 in (57.1 mm)
1.52 in (38.6 mm)
34.9 in (886.46 mm)
KUEP-3D15-24
TE Connectivity's KUEP-3D15-24 is a power & signal relay with SPST function and 1 FORM X form. It has an operate time of 15 ms, electrical life of 100000 cycles, and insulation resistance of 100000000 ohm. This relay is commonly used in applications requiring momentary relay action and can handle max AC contact current of 10 A.
KUEP-3D15-48
TE Connectivity's KUEP-3D15-48 is a SPST power/signal relay with 1 FORM X configuration. With operate time of 15ms, it has max AC contact current of 10A@150VDC. Ideal for panel mounting applications requiring dust-proof sealing and random input switching control.
1.3 W
1.8 kΩ
48 V
25 mA
36 V
KUEP-3D17-12
TE Connectivity's KUEP-3D17-12 is a SPST power/signal relay with 1 FORM X configuration. With an operate time of 15ms and electrical life of 100,000 cycles, it is ideal for applications requiring momentary relay action. Featuring dust-proof sealing and dimensions of 38.9mm x 35.7mm x 48.4mm, this relay has a max AC contact current of 10A@150VDC and is suitable for panel mounting in various electronic systems.
0.0394 in (1.001 mm)
KUEP-3D35-24
TE Connectivity's KUEP-3D35-24 is a SPST power/signal relay with 1 FORM X configuration. With 15ms operate time, it offers 100000 cycles electrical life and insulation resistance of 100MΩ. Ideal for applications requiring momentary relay action, it has a max AC contact current of 10A and operates at temperatures ranging from 50°C to 70°C.
KUEP-7D15-12
TE Connectivity's KUEP-7D15-12 is a DPST relay with 2 FORM A configuration, operating at 9V DC coil voltage. With a max AC contact current of 10A@150VDC, it's ideal for power/signal relay applications requiring dust-proof sealing and quick connect solder termination. Measuring 38.9mm x 35.7mm x 48.4mm and weighing 85g, this relay offers high insulation resistance of 100MΩ and dielectric strength b/w coil & contacts of 2200Vrms.
DPST
2 Form A
150 mA
KUEP-7D15-48
TE Connectivity's KUEP-7D15-48 is a DPST relay with 2 FORM A, 15ms operate time, and 100000 cycle electrical life. Ideal for power & signal applications, it has a max AC contact current of 10A@150VDC, operates at temperatures b/w 50-70°C, and features dust-proof sealing.
1.85 W
1.25 kΩ
KUMP-14A18-120
TE Connectivity's KUMP-14A18-120 is a 3PDT power/signal relay with 3 FORM C configuration. With an AC coil operate voltage of 102V, it offers a max contact rating of 15A@277VAC. Ideal for panel mounting applications, this relay has a compact size of 38.9mm x 35.7mm x 48.4mm and operates b/w temperatures of 0 to 45°C.
11
0.1969 in (5.001 mm)
KUMP-14D18-24
TE Connectivity's KUMP-14D18-24 is a 3PDT power/signal relay with 15A@277VAC contact rating. With a 15ms operate time and 100000 cycle electrical life, it offers momentary relay action. Ideal for panel mounting applications, this dust-proof relay has a compact size of 38.9mm x 35.7mm x 48.4mm and operates at temperatures ranging from 50 to 70°C.
KUP-14A35F-120
TE Connectivity's KUP-14A35F-120 is a 3PDT power/signal relay with 15ms operate time and 100000 cycle electrical life. Ideal for applications requiring momentary relay action, it has a max AC contact rating of 10A@120VAC and operates at temperatures ranging from 0 to 45°C.
10A@120VAC
10A@28VDC
KUP-14D15-6
TE Connectivity's KUP-14D15-6 is a 3PDT power/signal relay with 15ms operate time and 10000 cycle electrical life. With 10A@120VAC max contact AC rating, it's ideal for applications requiring momentary relay action in dust-proof environments. Measuring 38.9mm x 35.7mm x 48.4mm and weighing 85g, it features a coil resistance of 32 ohm and operates at temperatures b/w -50°C to +70°C.
1.125 W
32 Ω
6 V
200 mA
4.5 V
KUL-11A15S-24
TE Connectivity's KUL-11A15S-24 DPDT relay has 25ms operate time, 100000 cycle electrical life, and 10A@240VAC max contact AC rating. Ideal for power applications, it features a latched relay action with dust-proof sealing and operates b/w -50°C to +70°C temperatures.
Latched
176 Ω
2.157 in (54.8 mm)
1.531 x 1.406 x 2.157 in (38.9 x 35.7 x 54.8 mm)
96 g
25 ms
UL
KUL-11D15D-12
TE Connectivity's KUL-11D15D-12 DPDT relay offers 2 FORM C configuration, with 25ms operate time and 100000 cycles electrical life. Ideal for power applications, it features a latched relay action, 10A max AC contact current at 240VAC, and operates on a nominal coil voltage of 12V.
0.33HP@240VAC
1.6 W
90 Ω
133 mA
0.2756 in (7 mm)
KUL-11D15D-24
TE Connectivity's KUL-11D15D-24 is a DPDT relay with 2 FORM C, latched action, and 100000 cycle electrical life. With a coil resistance of 350 ohm and operate voltage of 18V DC, it's ideal for AC/DC supply applications. This dust-proof relay has a compact size of 38.9mm x 35.7mm x 54.8mm and can handle up to 10A@240VAC load power rating.
1.65 W
350 Ω
67 mA
KUL-11D15D-48
TE Connectivity's KUL-11D15D-48 is a DPDT relay with 2 FORM C, latched action, and dust-proof sealing. With 10A@240VAC max contact AC rating, it's ideal for power/signal applications requiring reliable switching at temperatures ranging from 0 to 50°C. Featuring a compact design of 38.9mm x 35.7mm x 54.8mm and UL certification, it ensures high performance and durability in various industrial settings.
1.4 kΩ
33 mA
KUL-11D15S-12
TE Connectivity's KUL-11D15S-12 is a DPDT relay with 2 FORM C, operate time of 25ms, and electrical life of 100000 cycles. Ideal for power applications, it has a max AC contact current of 10A@240VAC and operates at temperatures b/w 50°C to 70°C. With sealing as dust proof, this latched relay is UL certified for reliable performance.
KHAE-17D12-24
TE Connectivity's KHAE-17D12-24 is a 4PDT power/signal relay with 13ms operate time and 10000000 cycle electrical life. Ideal for applications requiring a dust-proof, momentary relay with 4 FORM C configuration, such as panel-mounted control systems.
5A@120VAC
5A@28VDC
0.1102 in (2.799 mm)
10000000 Cycle(s)
KBP-11DG-24
TE Connectivity's KBP-11DG-24 is a DPDT relay with 2 FORM C, latched action, and operates at 25ms. With a coil voltage of 24V DC, it has a max AC contact current of 10A@120VAC. Ideal for power & signal applications requiring dust-proof sealing and high insulation resistance.
230 Ω
3.559 in (90.4 mm)
2.406 in (61.1 mm)
45.2 in (1148.08 mm)
2.406 x 1.78 x 3.559 in (61.1 x 45.2 x 90.4 mm)
306 g
Socket Mount
-45 °C (-49 °F)
85 °C (185 °F)
Snap-On
500000 Cycle(s)
KHAU-17D12-12
TE Connectivity's KHAU-17D12-12 is a 4PDT power/signal relay with 4 FORM C configuration, ideal for panel mounting applications. With a coil resistance of 160 ohm and operate voltage of 9V DC, it offers quick switching control in a compact size of 28.2mm x 21.8mm x 34.9mm, weighing only 45g.
900 mW
160 Ω
0.315 in (8.001 mm)
KHAU-11D11-24
TE Connectivity's KHAU-11D11-24 DPDT relay offers 2 FORM C configuration, with 13ms operate time. Ideal for power & signal applications, it features 100000000 ohm insulation resistance and operates at temperatures ranging from 50 to 70 °C. Suitable for panel mounting, this relay has a coil resistance of 650 ohm and weighs 45g.
KUP-14D15-48
TE Connectivity's KUP-14D15-48 is a 3PDT power/signal relay with 15ms operate time and 10000 cycles electrical life. Ideal for AC/DC applications, it offers 10A@120VAC max contact AC rating and features dust-proof sealing for reliable performance in various industrial settings.
KUP-11D35-24
TE Connectivity's KUP-11D35-24 is a DPDT relay with 2 FORM C, 15ms operate time, and 10000 cycles electrical life. Ideal for applications requiring momentary relay action, it has a max AC contact current of 10A@240VAC and operates at temperatures b/w 50°C to 70°C.
Gold
KUP-14A11-120
TE Connectivity's KUP-14A11-120 is a 3PDT power/signal relay with 15ms operate time and 10000 cycles electrical life. Ideal for AC/DC applications, it features a max contact rating of 5A@120VAC, dust-proof sealing, and operates at temperatures ranging from 0 to 45°C.
Coil Operate Voltage (AC): 90 V
KUP-14D15-24
TE Connectivity's KUP-14D15-24 is a 3PDT power/signal relay with a 15ms operate time and 10000 cycle electrical life. It is commonly used in applications requiring momentary relay action, such as control panels or industrial automation systems.
KUP-11D11-24
TE Connectivity's KUP-11D11-24 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 15ms, has an electrical life of 10k cycles, and offers dust-proof sealing. With a max AC contact current of 5A@240VAC, it is ideal for applications requiring momentary relay action in environments with temperatures ranging from 50 to 70°C.
5A@240VAC
KUP-14D35-24
TE Connectivity's KUP-14D35-24 is a 3PDT relay with 15ms operate time and 10000 cycles electrical life. Ideal for panel mounting, it has a max AC contact current of 10A@240VAC and DC coil voltage of 24V. Suitable for power/signal applications requiring momentary relay action.
KHAU-17A11-120
TE Connectivity's KHAU-17A11-120 is a 4PDT power/signal relay with 4 FORM C configuration, ideal for AC applications. With an AC coil operate voltage of 102V and max AC contact current of 2.5A, it offers fast operate time of 13ms and release time of 6ms. This dust-proof relay has a compact size of 28.2mm x 21.8mm x 34.9mm, making it suitable for panel mounting in various electronic systems.
© 2023 All rights reserved
