Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
FCA-325-BY4
TE Connectivity
TE Connectivity's FCA-325-BY4 is a 3PDT-CO power/signal relay with 15ms operate time. It features 10A@115VAC max contact rating and hermetically sealed design. Ideal for AC/DC applications, this relay has a coil resistance of 290 ohm and operates at temperatures ranging from -70 to 125 °C.
Power/Signal Relay
3PDT-CO
Momentary
3 Form C
Random
DC
AC/DC
25 A
115 V
25A@115VAC
28 V
25A@28VDC
15A@115VAC
10A@115VAC
290 Ω
18 V
1.5 V
1.01 in (25.65 mm)
1.025 in (26.03 mm)
26.03 in (661.162 mm)
1.025 x 1.025 x 1.01 in (26.03 x 26.03 x 25.65 mm)
82 g
Panel Mount
11
0.2677 in (6.8 mm)
15 ms
-70 °C (-94 °F)
125 °C (257 °F)
1.25 kVrms
100 MΩ
Silver Cadmium Oxide
Gold
Tin/Lead
Solder Hook
e0
Hermetically Sealed
FCA-410-1622M
TE Connectivity's FCA-410-1622M is a 4PDT-CO power/signal relay with 15ms operate time. With 4 FORM C relay form, it has a max contact AC rating of 4A@120VAC. Ideal for panel mounting applications, this hermetically sealed relay offers momentary action and gold plating on end contacts.
4PDT-CO
4 Form C
10 A
120 V
10A@120VAC
10A@28VDC
8A@120VAC
4A@120VAC
10 mΩ
77 g
e4
FCB-205-0224M
TE Connectivity's FCB-205-0224M is a DPDT-CO relay with 2 FORM C sealing. It operates in temperatures from -70 to 125 °C, handling up to 5A AC/DC current. Ideal for power and signal applications, featuring hermetically sealed construction and gold terminal finish for reliable performance.
DPDT-CO
2 Form C
5 A
500 Ω
FCB-205-0228M
TE Connectivity's FCB-205-0228M is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -70 to 125°C, handling up to 5A AC/DC contact current. Ideal for applications requiring hermetically sealed, momentary relays with gold terminal finish and silver cadmium oxide contacts.
Socket Mount
Solder/Quick Connect
FCB-205-BY4
TE Connectivity's FCB-205-BY4 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -70 to 125°C, suitable for AC/DC applications with max contact current of 5A. With hermetically sealed design and silver cadmium oxide contacts, it is ideal for panel mounting in various industries.
JMAC-5XLS
TE Connectivity's JMAC-5XLS is a DPDT-CO power/signal relay with 2 FORM C configuration, hermetically sealed for reliability. With max operating temperature of 125°C and coil resistance of 50 ohm, it is ideal for panel mount applications in aerospace and defense industries.
1 A
500 mW
50 Ω
5 V
100 mA
-65 °C (-85 °F)
M39016
1393807-7
TE Connectivity's 1393807-7 DPDT power/signal relay has a body width of 13", height of 30mm, and weight of 20g. With sealing for dust-proof protection, it operates b/w -40 to 70°C. Ideal for applications requiring momentary relay action with AC/DC coil and contact supply types.
DPDT
2 A
36 V
727 mW
3.2 kΩ
15 mA
30 V
1.181 in (30 mm)
0.945 in (24 mm)
13 in (330.2 mm)
0.75 x 0.94 x 1.18 in (19 x 24 x 30 mm)
20 g
Box
-40 °C (-40 °F)
70 °C (158 °F)
1 kVrms
500 Vrms
Dust Proof
1415539-4
TE Connectivity 1415539-4 is a SPDT power/signal relay with 1 FORM C form factor. Operates at 8ms, with max AC contact current of 12A@400VAC. Ideal for applications requiring momentary relay action in power systems.
SPDT
1 Form C
AC
12 A
400 V
12A@400VAC
3000VA@400VAC
400 mW
1.44 kΩ
24 V
17 mA
16.8 V
2.4 V
0.618 in (15.7 mm)
1.142 in (29 mm)
12.7 in (322.58 mm)
1.142 x 0.5 x 0.618 in (29 x 12.7 x 15.7 mm)
14 g
5
0.1417 in (3.599 mm)
Box; Tube
8 ms
6 ms
85 °C (185 °F)
5 kVrms
Silver Nickel
UL; VDE
Flux-Tight
4-1415538-3
TE Connectivity 4-1415538-3 is a DPDT relay with 2 FORM C, suitable for power & signal applications. It has a coil resistance of 32500 ohm, max AC contact current of 8 A, and operates at temperatures ranging from 50 to 70 °C. Ideal for panel mounting with solder/quick connect termination type.
8 A
750 mW
32.5 kΩ
3 mA
230 V
13 g
50 °C (122 °F)
Coil Operate Voltage (AC): 172.5 V, Coil Release Voltage (AC): 34.5 V
FCA-210-0923M
TE Connectivity's FCA-210-0923M is a DPDT-CO power/signal relay with 2 FORM C configuration. It operates at 10ms, has 4A@115VAC AC rating, and is hermetically sealed. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -70 to 125 °C.
8A@115VAC
4A@115VAC
320 Ω
13.3 in (337.82 mm)
1.025 x 0.524 x 1.01 in (26.03 x 13.3 x 25.65 mm)
45.4 g
8
0.3071 in (7.8 mm)
10 ms
FCA-210-0926M
TE Connectivity's FCA-210-0926M is a DPDT-CO power/signal relay with 2 FORM C configuration. It operates at 10ms, has a max AC rating of 4A@115VAC, and is hermetically sealed. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -70°C to 125°C.
FCA-210-1023M
TE Connectivity's FCA-210-1023M is a DPDT-CO power & signal relay with 2 FORM C configuration. It has a max AC contact rating of 4A@115VAC and operates at temperatures up to 125°C. This hermetically sealed relay is commonly used in applications requiring momentary relay action and high insulation resistance.
13.33 in (338.582 mm)
1.025 x 0.525 x 1.01 in (26.03 x 13.33 x 25.65 mm)
FCA-210-1027M
TE Connectivity's FCA-210-1027M is a DPDT-CO relay with 2 FORM C, hermetically sealed for power & signal applications. With operate time of 10 ms, it offers max contact AC rating of 4A@115VAC and insulation resistance of 100000000 ohm. Ideal for panel mounting, this relay has coil resistance of 320 ohm and operates at temperatures ranging from -70 to 125 °C.
0.525 in (13.33 mm)
0.1969 in (5.001 mm)
Panel Mountable, Polarized, with Coil Suppression Diode
FCB-205-0119M
TE Connectivity's FCB-205-0119M is a DPDT-CO power/signal relay with 2 FORM C. It operates at 5ms, has a max contact rating of 3A@115VAC, and is hermetically sealed. Ideal for AC/DC applications requiring momentary relay action in harsh environments.
5A@115VAC
5A@28VDC
3A@115VAC
50 mΩ
0.64 in (16.26 mm)
0.81 in (20.57 mm)
10.41 in (264.414 mm)
0.81 x 0.41 x 0.64 in (20.57 x 10.41 x 16.26 mm)
15.4 g
Through Hole-Straight Mount
0.1693 in (4.3 mm)
5 ms
PRD-11AJ0-120
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: AC; Reference Standard: CSA; UL;
20 A
600 V
9.8 W
82 mA
2.5 in (63.5 mm)
3.374 in (85.7 mm)
63.8 in (1620.52 mm)
3.374 x 2.512 x 2.5 in (85.7 x 63.8 x 63.5 mm)
CSA; UL
PRD-5DY0-110
TE Connectivity's PRD-5DY0-110 is a SPDT power/signal relay with 25A AC contact current and 110V DC coil voltage. Measuring 85.7mm x 63.8mm x 63.5mm, it features momentary relay action and solder/quick connect termination, suitable for panel mounting applications in various industries.
2 W
6.05 kΩ
110 V
18 mA
V23057B2A101
TE Connectivity's V23057B2A101 is a SPDT 1 FORM C power/signal relay with 10.4mm width, 25.1mm height, and 28mm length/diameter. It operates b/w -40 to 70°C, handles up to 5A AC/DC contact current at 400V, and has a coil resistance of 330Ω. Ideal for panel mounting applications in various industries.
436 mW
330 Ω
12 V
37 mA
8 V
1.2 V
0.988 in (25.1 mm)
1.102 in (28 mm)
10.4 in (264.16 mm)
1.102 x 0.409 x 0.988 in (28 x 10.4 x 25.1 mm)
1393809-1
TE Connectivity's 1393809-1 DPDT power/signal relay has a body width of 19", dust-proof sealing, and a max AC contact current of 5A. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -40°C to 70°C.
250 V
647 mW
890 Ω
27 mA
19 in (482.6 mm)
0.75 x 1.18 x 1.18 in (19 x 30 x 30 mm)
25 g
1.5 kVrms
Silver
FCA-210-0924M
TE Connectivity's FCA-210-0924M is a DPDT-CO relay with 2 FORM C, operate time of 11ms, and max contact AC rating of 4A@115VAC. Hermetically sealed for reliability, it's ideal for power & signal applications requiring momentary relay action in harsh environments.
11 ms
FCA-210-1019M
TE Connectivity's FCA-210-1019M is a DPDT-CO relay with 2 FORM C configuration. It operates at 10ms, has a max AC rating of 4A@115VAC, and is hermetically sealed. Ideal for power applications requiring momentary relay action, it features gold-plated terminals and silver cadmium oxide contacts.
FCA-210-DY9
TE Connectivity's FCA-210-DY9 is a DPDT-CO power/signal relay with 2 FORM C configuration. It operates at 95V AC, has a max contact rating of 4A@115VAC, and features hermetically sealed sealing. Ideal for applications requiring momentary relay action in environments ranging from -70°C to 125°C.
30 mA
95 V
1.122 in (28.5 mm)
1.025 x 0.524 x 1.122 in (26.03 x 13.3 x 28.5 mm)
50 ms
50 MHz
400 MHz
FCA-410-1522M
TE Connectivity's FCA-410-1522M is a 4PDT-CO power/signal relay with hermetically sealed sealing. It operates at temperatures ranging from -70 to 125°C, with max AC contact current of 10A. Ideal for applications requiring momentary relay action and panel mounting, it features gold terminal finish and silver cadmium oxide end contact material.
2.716 W
97 mA
Polarized
PRD-7AY0-240
TE Connectivity's PRD-7AY0-240 is a DPST power/signal relay with 63.8mm width and 63.5mm height, suitable for panel mounting applications. It operates at a max AC coil voltage of 240V and can handle up to 25A of AC contact current, meeting CSA and UL standards.
DPST
1.2 kΩ
41 mA
240 V
RMD05024
TE Connectivity RMD05024 is a 35.5mm SPST power/signal relay with dust-proof sealing, suitable for panel mounting. It operates at 18V DC, has a coil resistance of 475 ohm, and can handle up to 30A AC contact current. Ideal for applications requiring momentary relay action in UL-compliant systems.
SPST
30 A
1.2 W
475 Ω
50 mA
2.894 in (73.5 mm)
1.516 in (38.5 mm)
35.5 in (901.7 mm)
1.516 x 1.398 x 2.894 in (38.5 x 35.5 x 73.5 mm)
Tray
Quick Connect
UL
6-1393808-5
TE Connectivity 6-1393808-5 is a 4PDT power/signal relay with 2 FORM C configuration. It has a coil resistance of 550 ohm and can handle up to 2A of AC/DC contact current at 125V. With dust-proof sealing, it's ideal for applications requiring momentary relay action in harsh environments.
4PDT
125 V
150 V
720 mW
550 Ω
38 mA
1 GΩ
8-1393808-3
TE Connectivity 8-1393808-3 is a 4PDT power/signal relay with 1 FORM C form. It offers high insulation resistance of 1G ohm, suitable for AC/DC applications. With dust-proof sealing and compact dimensions of 19x30x30 mm, it's ideal for industrial automation systems.
Nickel Palladium
HFW1201K46M
TE Connectivity's HFW1201K46M is a 2 FORM C DPDT-CO power/signal relay with hermetically sealed sealing. It operates b/w -65 to 125 °C, has 0.038 A DC coil current, and 2 A AC contact current. Ideal for applications requiring momentary relay action in AC/DC circuits with panel mount installation.
1.003 W
700 Ω
26.5 V
0.41 in (10.41 mm)
Solder
JMGACDD-26MW
TE Connectivity's JMGACDD-26MW is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates at temperatures from -65 to 125 °C, with max DC coil current of 0.017 A and AC contact current of 1 A. Ideal for applications requiring hermetically sealed, momentary relay action in AC/DC circuits.
450 mW
1.56 kΩ
With Coil Suppression Diode
PRD-11DY0-24
TE Connectivity's PRD-11DY0-24 is a DPDT power/signal relay with 63.8mm width, 63.5mm height, and 85.7mm length/diameter. It has a max AC contact current of 25A, coil resistance of 288 ohm, and operates at a max DC coil voltage of 24V. Ideal for panel mounting applications requiring momentary relay action in AC/DC circuits up to 600V.
288 Ω
83 mA
V23057B0006A102
TE Connectivity V23057B0006A102 is a 1 FORM A SPST power/signal relay with 10.4mm width, 25.1mm height, and 5A AC contact current. It operates b/w -40 to 70°C, has a coil resistance of 1200Ω, and is suitable for panel mounting applications in various industries.
1 Form A
480 mW
20 mA
16 V
V23101D3A201
TE Connectivity's V23101D3A201 is a SPDT 1 FORM C power/signal relay with 10.5mm width, 11.5mm height, and MOMENTARY action. It operates b/w -40 to 85 °C with max DC contact current of 1.25 A, suitable for AC/DC applications in various industries.
1.25 A
446 mW
56 Ω
90 mA
0.453 in (11.5 mm)
0.61 in (15.49 mm)
10.5 in (266.7 mm)
0.614 x 0.417 x 0.453 in (15.6 x 10.6 x 11.5 mm)
4 g
750 Vrms
Silver Palladium Alloy
1415539-1
TE Connectivity's 1415539-1 is a DPST relay with 2 FORM A, suitable for power/signal applications. With a coil resistance of 360 ohm and max AC contact current of 8A, it operates at temperatures b/w 70-85°C. This panel mount relay has a compact size of 29mm x 12.7mm x 15.7mm, making it ideal for various AC/DC supply termination needs.
2 Form A
360 Ω
33 mA
8.4 V
5-1393810-9
TE Connectivity 5-1393810-9 is a 4PDT, 2 FORM C power/signal relay with insulation resistance of 1TΩ. Ideal for applications requiring momentary relay action, it operates b/w -40 to 70°C and supports AC/DC coil and contact supply types.
654 mW
220 Ω
54 mA
1000 GΩ
PRD-11AG0-120
TE Connectivity's PRD-11AG0-120 is a DPDT power/signal relay with 2 FORM C configuration. It operates at 12V AC coil release voltage and has a max contact rating of 50A@600VAC. Ideal for applications requiring momentary relay action in panels, it offers high insulation resistance and dielectric strength b/w contacts.
50A@600VAC
50A@125VDC
75 mΩ
102 V
284 g
40 ms
20 ms
2 kVrms
RM805615
TE Connectivity RM805615 is a DPDT power/signal relay with 2 FORM C configuration. It operates at AC coil voltage of 97.8V and has a max contact rating of 25A@400VAC. Ideal for applications requiring momentary relay action in dust-proof environments.
25A@400VAC
6000VA@400VAC
2.8 W
1.85 kΩ
24 mA
97.8 V
34.5 V
81 g
0.3937 in (10 mm)
40 °C (104 °F)
2.5 kVrms
10000 Cycle(s)
Coil Operate Voltage (AC): 92 V, Coil Release Voltage (AC): 34.5 V
V23061B1005A401
TE Connectivity's V23061B1005A401 is a SPDT power/signal relay with 8A AC contact current and 652 ohm coil resistance. Operating at 8.4V, it has a max DC coil current of 0.018A and requires 220mW coil power. Ideal for applications requiring momentary relay action in AC/DC circuits with through-hole mounting.
220 mW
652 Ω
0.591 in (15 mm)
10 in (254 mm)
1.181 x 0.394 x 0.591 in (30 x 10 x 15 mm)
2-1393224-7
TE Connectivity 2-1393224-7 is a SPST relay with 1 FORM B form factor. It operates at temperatures b/w 50°C to 70°C, with a coil resistance of 627 ohm. Ideal for power and signal applications, it has a max AC contact current of 8A and dielectric strength of 1000 Vrms.
1 Form B
230 mW
627 Ω
0.484 in (12.3 mm)
10.1 in (256.54 mm)
1.122 x 0.398 x 0.484 in (28.5 x 10.1 x 12.3 mm)
8 g
3-1393809-2
TE Connectivity's 3-1393809-2 is a 4PDT power/signal relay with a 1 FORM C form. It has an insulation resistance of 1GΩ, operates at temperatures ranging from -40 to 70°C, and can handle max AC contact current of 2A. This relay is suitable for panel mounting applications in various industries.
4-1393808-9
TE Connectivity 4-1393808-9 is a 4PDT power/signal relay with 1 FORM C form. It has a max AC contact current of 2A and operates b/w -40 to 70 °C. Ideal for applications requiring momentary relay action, dust-proof sealing, and panel mounting in various industries.
Nickel Titanium
RM835024
TE Connectivity RM835024 is a DPDT power/signal relay with 25A AC contact current and 475 ohm coil resistance. Ideal for panel mounting, it operates at 18V DC with a max coil current of 0.05A. Sealed against dust, it suits applications requiring momentary relay action in UL/VDE compliant systems.
3-1393807-7
TE Connectivity 3-1393807-7 is a DPDT power/signal relay with 1 FORM C form factor. It offers insulation resistance of 1 Gohm, operates b/w -40 to 70°C, and has a coil power of 602 mW. Ideal for applications requiring momentary relay action in dustproof environments.
602 mW
19 mA
Lead Nickel
7-1415538-7
TE Connectivity's 7-1415538-7 is a DPDT power/signal relay with 2 FORM C configuration. It operates at temperatures b/w 70°C to 85°C, with max AC contact current of 8A and coil resistance of 1440Ω. Ideal for panel mounting applications requiring momentary relay action.
PRD-7AY0-120
TE Connectivity's PRD-7AY0-120 is a DPST power/signal relay with 2 FORM A configuration. It operates at 12V AC coil release voltage and has a max contact rating of 50A@600VAC. Ideal for panel mounting applications, this relay offers quick connect termination and high dielectric strength b/w coil & contacts.
V23101D6A201
TE Connectivity's V23101D6A201 is a SPDT 1 FORM C power/signal relay with 10.5mm width, 11.5mm height, and coil resistance of 320 ohm. It operates b/w -40 to 85°C, handles up to 1.25A AC/DC contact current at max 125V voltage, and has a dielectric strength of 750Vrms b/w open contacts. Ideal for panel mounting applications requiring momentary relay action.
V23101D6B201
TE Connectivity's V23101D6B201 is a SPDT 1 FORM C power/signal relay with 10.5mm width, 11.5mm height, and coil resistance of 320 ohm. It operates b/w -40°C to 85°C, handles max DC contact current of 1.25A at 120V, and has dielectric strength of 750Vrms b/w open contacts. Ideal for applications requiring momentary relay action in AC/DC circuits with solder/quick connect termination type.
WUV-1-120
TE Connectivity's WUV-1-120 is a SPST-NC relay with 1 FORM B form, ideal for power applications. With a max AC contact current of 5A@120VAC and operating temperatures ranging from -20 to 65 °C, it offers reliable performance. This panel mount relay features solder/quick connect termination and is suitable for various power and signal relay functions.
SPST-NC
5A@120VAC
3.5 x 3.87 x 3 in (88.9 x 98.29 x 76.2 mm)
-20 °C (-4 °F)
65 °C (149 °F)
1415390-1
TE Connectivity 1415390-1 is a SPDT power/signal relay with 1 FORM C configuration. It has a max AC contact current of 5A@400VAC, making it suitable for applications requiring momentary relay action in power systems. With a compact size of 20mm x 10mm x 10mm and sealing rating of RT2, it is ideal for panel mount installations where space is limited.
5A@400VAC
41 Ω
3 V
73 mA
2.2 V
0.394 in (10 mm)
0.787 in (20 mm)
0.787 x 0.394 x 0.394 in (20 x 10 x 10 mm)
5 g
4 kVrms
10000 GΩ
CUL; VDE
RT2
2-1393224-8
TE Connectivity 2-1393224-8 is a SPST power/signal relay with 1 FORM B form. It operates at temperatures b/w 50°C to 70°C, with coil resistance of 2350 ohm and max AC contact current of 8A. Ideal for applications requiring momentary relay action in AC/DC circuits.
245 mW
2.35 kΩ
9 mA
© 2023 All rights reserved
