Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LEV100A6ANG
TE Connectivity
The TE Connectivity LEV100A6ANG is a POWER/SIGNAL RELAY with SPST-NO-DM function. It has a max AC contact current of 100A and DC contact voltage of 900V, making it ideal for high-power applications like industrial machinery control systems. With a coil resistance of 392 ohm and solder/quick connect termination type, it offers reliable performance in panel mount installations requiring up to 48V DC coil voltage.
Power/Signal Relay
SPST-NO-DM
1 Form X
DC
100 A
900 V
392 Ω
48 V
Panel Mount
Solder/Quick Connect
FM200BAXXX
TE Connectivity's FM200BAXXX is a 3PST-NO-DM power/signal relay with 3 FORM X form factor. It offers a max AC contact current of 200A and DC contact voltage of 48V, making it ideal for high-power applications requiring reliable switching capabilities. With a coil resistance of 12 ohm and solder/quick connect termination type, this panel mount relay is suitable for various industrial and automotive systems.
3PST-NO-DM
3 Form X
200 A
12 Ω
24 V
5-1618394-7
TE Connectivity 5-1618394-7 is a DPST-NO power/signal relay with 2 FORM X. It has max AC contact current of 300A and DC contact voltage of 600V. Ideal for applications requiring high current switching in panel mount configurations.
DPST-NO
2 Form X
300 A
600 V
98 Ω
28 V
EV100AAANA
TE Connectivity's EV100AAANA is a SPST-NO power/signal relay with 1 FORM X form. It offers a max AC contact current of 100A and DC contact voltage of 600V, with coil resistance of 8 ohm. Ideal for applications requiring high current switching in panels, it has solder/quick connect termination and operates on DC supply up to 36V.
SPST-NO
8 Ω
36 V
KCS03X024EAAA
TE Connectivity's KCS03X024EAAA is a SPST-NO-DM power/signal relay with 1 FORM X form. It has a max AC contact current of 600A and DC contact voltage of 600V, suitable for panel mounting applications requiring high current switching capabilities up to 600A at 28V DC.
600 A
126 Ω
2-1618404-6
TE Connectivity 2-1618404-6 is a DPST-NO power/signal relay with 300A AC contact current and 600V DC contact voltage. Its coil resistance is 98 ohm, suitable for panel mounting applications requiring high current switching capabilities up to 300A. Termination options include solder/quick connect, making it versatile for various power control systems.
LEV200H5ANA
TE Connectivity's LEV200H5ANA is a SPST-NO-DM power/signal relay with 500A AC contact current and 900V DC contact voltage. Featuring 40 ohm coil resistance, it is ideal for panel mount applications requiring high current switching capabilities up to 500A. Suitable for various industries needing reliable power relay solutions.
500 A
40 Ω
5-1618400-3
TE Connectivity 5-1618400-3 is a DPST-NO power/signal relay with 2 FORM X. It has max AC contact current of 300A and DC contact voltage of 600V. Ideal for panel mounting, this relay operates on DC coil supply at 28V, making it suitable for high-power applications.
LEV200A5ANA
TE Connectivity's LEV200A5ANA is a SPST-NO-DM power/signal relay with 500A AC contact current and 900V DC contact voltage. Featuring 40 ohm coil resistance, it is ideal for panel mount applications requiring high current switching capabilities up to 500A DC.
9-1618389-8
TE Connectivity 9-1618389-8 is a SPST-NO-DM power/signal relay with 100A AC contact current and 900V DC contact voltage. Ideal for panel mounting applications, it features a coil resistance of 96 ohm and operates on a 24V DC supply.
96 Ω
JMGST-18M
TE Connectivity's JMGST-18M is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65°C to 125°C, handling up to 1A AC/DC current. Ideal for panel mounting applications requiring a reliable and efficient relay solution.
DPDT-CO
2 Form C
1 A
203 mW
1.6 kΩ
18 V
-65 °C (-85 °F)
125 °C (257 °F)
Hermetically Sealed
1-1617120-2
TE Connectivity 1-1617120-2 is a SPST-CO power/signal relay with 1 FORM C form. Hermetically sealed, it operates b/w -65°C to 125°C, handling up to 1A AC/DC contact current at 28V. Ideal for panel mounting applications, it has a coil resistance of 125 ohm and requires DC input supply.
SPST-CO
1 Form C
200 mW
125 Ω
5 V
6-1617672-4
TE Connectivity's 6-1617672-4 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65 to 125°C, handling up to 1A AC/DC current at 28V. Ideal for panel mounting applications, this relay has a coil resistance of 3300 ohm and consumes 213mW coil power.
213 mW
3.3 kΩ
26.5 V
2903294
Phoenix Contact
Phoenix Contact 2903294 is a 3PDT power/signal relay with 18ms operate time. It has IP20 sealing, MOMENTARY action, and operates at -40 to 85°C. Suitable for AC/DC applications, DIN-rail mountable, with coil voltage of 24V and contact current up to 8.5A.
3PDT
Momentary
Random
AC/DC
8.5 A
250 V
1.44 W
60 mA
3.543 in (90 mm)
4.055 in (103 mm)
40 in (1016 mm)
4.055 x 1.575 x 3.543 in (103 x 40 x 90 mm)
DIN Rail Mount
Bulk
18 ms
20 ms
-40 °C (-40 °F)
85 °C (185 °F)
Silver Nickel
CSA; DIN; DNVGL; EAC; EN; LR; PRS; TUV; UL
IP20; RT1
Coil with Diode
2912277
POWER/SIGNAL RELAY; Mounting Feature: DIN-RAIL MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CUL; DIN EN 50178; EAC; GL; IEC 60664; PRS; RC FRT; UL;
SPDT
6 A
2 A
6A@250VAC
2A@24VDC
2500VA@250VAC
240W@24VDC
430 mW
1.333 kΩ
18 mA
3.701 in (94 mm)
3.15 in (80 mm)
14 in (355.6 mm)
3.15 x 0.551 x 3.701 in (80 x 14 x 94 mm)
8 ms
10 ms
60 °C (140 °F)
CUL; DIN EN 50178; EAC; GL; IEC 60664; PRS; RC FRT; UL
IP20; RT2
With Diode and LED Indication
2912507
POWER/SIGNAL RELAY; Mounting Feature: DIN-RAIL MOUNT; Relay Action: MOMENTARY; Relay Function: DPDT; Coil or Input Supply Type: DC; Reference Standard: CUL; DIN EN 50178; EAC; GL; IEC 60664; PRS; RC FRT; UL;
DPDT
3 A
3A@250VAC
1500VA@250VAC
140W@24VDC
IP20; RT3
2942153
Phoenix Contact 2942153 is a SPDT power/signal relay with 7ms operate time. It has a max DC contact voltage of 250V and operates at temperatures ranging from -20 to 40°C. Ideal for applications requiring momentary relay action, DIN-rail mounting, and screw termination.
500 mW
1.14286 kΩ
21 mA
19.2 V
2.461 in (62.5 mm)
2.953 in (75 mm)
10.6 in (269.24 mm)
2.953 x 0.417 x 2.461 in (75 x 10.6 x 62.5 mm)
7 ms
11 ms
-20 °C (-4 °F)
40 °C (104 °F)
Screw
CUL; EAC; EN; IEC; UL
With LED, Polarity Protection Diode, Freewheeling Diode and Damping Diode
2964500
The Phoenix Contact 2964500 is a SPDT power/signal relay with 1 FORM C configuration. It operates at 24VDC, has a max contact rating of 140W@24VDC, and features IP67 sealing. Ideal for applications requiring momentary relay action in harsh environments.
230 V
3A@230VAC
220 mW
2.667 kΩ
26.4 V
9 mA
2.205 in (56 mm)
6.2 in (157.48 mm)
3.15 x 0.244 x 2.205 in (80 x 6.2 x 56 mm)
5 ms
50 °C (122 °F)
Silver Tin Oxide
CUL; DIN EN 50178; EAC; IEC 60664; UL; VDE
IP67
TXD2-24V-6
Panasonic
Panasonic TXD2-24V-6 is a DPDT relay with 2 FORM C, 60W@220VDC power rating. It operates at -40 to 85 °C, with 4ms operate/release time. Ideal for DC supply switching applications due to its gold-plated contacts and compact size of 15mm x 7.4mm x 8.2mm.
BBM
220 V
2A@220VDC
60W@220VDC
310 mW
1.858 kΩ
28.8 V
12.9 mA
2.4 V
25 V
0.323 in (8.2 mm)
0.591 in (15 mm)
7.4 in (187.96 mm)
0.591 x 0.291 x 0.323 in (15 x 7.4 x 8.2 mm)
2 g
Through Hole-Straight Mount
8
0.1378 in (3.5 mm)
Tube
4 ms
3 kVrms
1.5 kVrms
1 GΩ
Silver
Gold
Solder
CSA; BSI; UL
100000 Cycle(s)
G5LE-14-ACD-DC24
Omron
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL;
10 A
8 A
10A@250VAC
125 V
8A@125VDC
400 mW
1.44 kΩ
17 mA
0.748 in (19 mm)
0.886 in (22.5 mm)
16.5 in (419.1 mm)
0.886 x 0.65 x 0.748 in (22.5 x 16.5 x 19 mm)
10.6 ms
12.2 ms
CSA; TUV; UL
Moisture Proof
G7L-2A-X-LDC12
Omron G7L-2A-X-LDC12 is a 12V DPST power/signal relay with 30ms operate/release time. It has 6 terminals, silver alloy contacts, and can handle up to 20A@1000VDC. Suitable for applications requiring high DC contact ratings in industrial settings.
DPST
2 Form A
20 A
1 KV
20A@1000VDC
100 mΩ
63 Ω
13.2 V
9 V
1.2 V
12 V
1.614 in (41 mm)
2.067 in (52.5 mm)
33.5 in (850.9 mm)
2.067 x 1.319 x 1.614 in (52.5 x 33.5 x 41 mm)
100 g
6
0.2362 in (5.999 mm)
30 ms
Silver Alloy
UL; VDE
G7L-2A-X-LDC24
POWER/SIGNAL RELAY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: UL; VDE; Body Height: 41 mm; Maximum DC Coil Voltage: 26.4 V;
250 Ω
G7L-2A-XDC24
Omron G7L-2A-XDC24 is a DPST power/signal relay with 2 FORM A configuration. Operates at 24V, 25A max DC current, and has sealing for flux-tight protection. Ideal for applications requiring momentary relay action in industrial settings.
25 A
25A@1000VDC
2.3 W
95 mA
Tray
5.6 kVrms
2.8 kVrms
CUL; UL; VDE
Flux-Tight
100 Cycle(s)
DSP1A-DC24V-R
Panasonic DSP1A-DC24V-R is a 1 FORM A SPST power/signal relay with 10ms operate time and 100000 cycle electrical life. It has a max contact DC power rating of 150W@125VDC, making it suitable for applications requiring high reliability and low power consumption in industrial control systems.
SPST
Latched
1 Form A
5 A
8A@250VAC
5A@125VDC
2000VA@250VAC
150W@125VDC
30 mΩ
1.92 kΩ
31.2 V
0.413 in (10.5 mm)
0.795 in (20.2 mm)
11 in (279.4 mm)
0.795 x 0.433 x 0.413 in (20.2 x 11 x 10.5 mm)
4.5 g
4
1 kVrms
G2R-1-EZDC24
POWER/SIGNAL RELAY; Relay Action: LATCHED; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CSA; TUV; UL; VDE; Maximum Contact AC Rating (R Load): 16A@380VAC;
16 A
380 V
16A@380VAC
16A@125VDC
50 mΩ
1.004 in (25.5 mm)
1.142 in (29 mm)
13.5 in (342.9 mm)
1.142 x 0.531 x 1.004 in (29 x 13.5 x 25.5 mm)
17 g
0.1575 in (4 mm)
15 ms
70 °C (158 °F)
5 kVrms
CSA; TUV; UL; VDE
DSP2A-DC24V-R
Panasonic's DSP2A-DC24V-R is a DPST power/signal relay with 2 FORM A configuration. It operates at 24V, has a max contact DC rating of 5A@125VDC, and features latched relay action. Ideal for applications requiring high electrical life and low coil power consumption in industrial control systems.
5A@250VAC
1250VA@250VAC
300 mW
13 mA
Box
725BXXSC3ML24D
Schneider Electric Sa
Schneider Electric Sa's 725BXXSC3ML24D is a DPST relay with 2 FORM A, operate time of 30ms, and electrical life of 100000 cycles. It is used in power applications with a max AC contact current of 25A@277VAC and coil resistance of 300Ω for control systems requiring quick connect termination.
277 V
25A@277VAC
30 V
25A@30VDC
300 Ω
2.094 in (53.2 mm)
2.665 in (67.7 mm)
33.1 in (840.74 mm)
2.665 x 1.303 x 2.094 in (67.7 x 33.1 x 53.2 mm)
120 g
55 °C (131 °F)
4 kVrms
2 kVrms
Quick Connect
CE; CSA; UL
3-1617784-4
TE Connectivity 3-1617784-4 is a DPDT-CO power/signal relay with 2 FORM C form. Hermetically sealed for durability, it operates b/w -70 to 125 °C with max AC/DC contact current of 10 A. Ideal for panel mounting applications requiring reliable switching in harsh environments.
80 Ω
-70 °C (-94 °F)
Silver Cadmium Oxide
FC-325-8
TE Connectivity's FC-325-8 is a 3 FORM X power/signal relay with hermetically sealed sealing. It operates b/w -70°C to 125°C, handling up to 25A AC/DC contact current. Ideal for panel mounting applications, it features silver cadmium oxide end contacts and a coil resistance of 160 ohms.
160 Ω
Solder Hook
2-1617785-7
TE Connectivity 2-1617785-7 is a 4PDT-CO power/signal relay with hermetically sealed sealing. It operates b/w -70 to 125°C, with max AC/DC contact current of 10A. Ideal for applications requiring reliable switching in harsh environments.
4PDT-CO
4 Form C
18 Ω
6 V
9-1617788-1
TE Connectivity 9-1617788-1 is a SPST-CO power/signal relay with hermetically sealed sealing. It has a max operating temperature of 125°C and can handle up to 25A AC/DC contact current. Ideal for applications requiring reliable switching in harsh environments.
320 Ω
1-1617788-6
The TE Connectivity 1-1617788-6 is a hermetically sealed power/signal relay with a DPDT-CO function. It has a max operating temperature of 125°C and a min operating temperature of -70°C. It has a coil resistance of 320 ohm and a max DC coil voltage of 28V. This relay is designed for panel mounting and is suitable for various applications requiring reliable power and signal switching.
1617123-8
TE Connectivity's 1617123-8 is a DPDT-CO power/signal relay with hermetically sealed sealing. It operates b/w -65°C to 125°C, handling up to 1A AC/DC contact current at 28V. Ideal for panel mounting applications requiring reliable switching in harsh environments.
50 Ω
1617786-2
TE Connectivity 1617786-2 is a 4PDT-CO power/signal relay with hermetically sealed sealing. It has max operating temp of 125°C, min of -70°C, and max AC/DC contact current of 10A. Ideal for applications requiring reliable switching in harsh environments.
70 Ω
2-1617785-6
TE Connectivity's 2-1617785-6 is a 4PDT-CO power/signal relay with a hermetically sealed form. It has a max operating temperature of 125°C and can handle up to 10A of AC or DC contact current. This panel mount relay, with SILVER CADMIUM OXIDE end contacts, is suitable for various applications requiring reliable switching capabilities.
3-1617786-5
TE Connectivity 3-1617786-5 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -70°C to 125°C, handling up to 5A AC/DC contact current. Ideal for applications requiring hermetically sealed relays in harsh environments.
31 Ω
4-1617791-2
TE Connectivity 4-1617791-2 is a SPST-CO power/signal relay with 1 FORM C form. It has hermetically sealed sealing, silver cadmium oxide end contact material, and operates b/w -70 to 125 °C. Ideal for applications requiring a max AC contact current of 25 A, DC coil voltage of 28 V, and solder hook termination.
4-1617791-5
TE Connectivity 4-1617791-5 is a SPST-CO power/signal relay with 1 FORM C form factor. Hermetically sealed for durability, it operates b/w -70°C to 125°C. With max AC/DC contact current of 25 A and coil resistance of 320 ohm, it's ideal for panel mounting in various applications.
9-1617748-5
TE Connectivity's 9-1617748-5 is a DPDT-CO power/signal relay with 2 FORM C form factor. Hermetically sealed, it operates b/w -70 to 125°C, handling up to 10A AC/DC current. Ideal for applications requiring reliable switching in harsh environments.
1-1617119-1
TE Connectivity 1-1617119-1 is a SPST-CO power/signal relay with 1 FORM C form. Hermetically sealed, it operates b/w -65°C to 125°C. With max AC contact voltage of 28V and DC coil voltage of 6V, it's ideal for panel mount applications requiring a max current of 1A.
288 mW
1617149-6
TE Connectivity's 1617149-6 is a DPDT-CO power/signal relay with hermetically sealed sealing. It has a max operating temperature of 125°C and can handle up to 1A of AC contact current. This relay is commonly used in panel mount applications requiring reliable switching capabilities.
219 mW
3.2 kΩ
1617149-8
TE Connectivity's 1617149-8 is a DPDT-CO power/signal relay with 2 FORM C sealing. It operates b/w -65°C to 125°C, handling up to 1A AC/DC contact current at 28V. Ideal for panel mounting applications requiring hermetically sealed relays.
1617340-4
TE Connectivity's 1617340-4 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed, it operates b/w -65°C to 125°C, handling up to 10A AC/DC current at 28V. Ideal for panel mounting applications requiring reliable switching in harsh environments.
1.895 W
19 Ω
1617541-4
TE Connectivity 1617541-4 is a SPST-CO power/signal relay with 1 FORM C form. Hermetically sealed, it operates b/w -65°C to 125°C. With max AC contact current of 1A and DC contact voltage of 28V, it's ideal for panel mount applications.
145 mW
11 kΩ
40 V
2-1415538-2
TE Connectivity 2-1415538-2 is a SPST-NO power/signal relay with 1 FORM A form factor. It has a max AC contact current of 16A and operates at temperatures ranging from -40 to 85°C. Ideal for applications requiring reliable switching in electrical circuits.
400 V
300 V
360 Ω
33 mA
0.618 in (15.7 mm)
12.7 in (322.58 mm)
1.14 x 0.5 x 0.62 in (29 x 12.7 x 15.7 mm)
Box; Tray
Silver Tin Oxide Indium Oxide
3-1617033-7
TE Connectivity 3-1617033-7 is a DPDT-CO power/signal relay with 2 FORM C configuration. Hermetically sealed for durability, it operates b/w -65 to 125°C. With a coil resistance of 700 ohm and max DC contact current of 2A, it's ideal for panel mounting in various applications.
1.003 W
700 Ω
3-1617340-3
TE Connectivity 3-1617340-3 is a DPDT-CO power/signal relay with 2 FORM C. Hermetically sealed for durability, it operates b/w -65 to 125°C. With max AC contact current of 10A and DC voltage of 28V, it's ideal for panel mounting in various applications.
1.89 W
7.6 kΩ
120 V
4-1415539-8
TE Connectivity 4-1415539-8 is a Power & Signal Relay with 1 FORM C form factor. It has a coil resistance of 360 ohm and can handle max AC contact current of 16 A. Ideal for applications requiring reliable switching in industrial settings.
13 g
Box; Tube
© 2023 All rights reserved
