Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MK3PND-5-I-DC48
Omron
POWER/SIGNAL RELAY; Mounting Feature: SOCKET MOUNT; Relay Action: MOMENTARY; Relay Function: 3PDT; Coil or Input Supply Type: DC; Reference Standard: CE; CSA; DEMKO; SEV; TUV; UL;
Power/Signal Relay
3PDT
Momentary
DC
AC/DC
10 A
250 V
10A@250VAC
10A@250VDC
1.5 W
1.63 kΩ
48 V
30 mA
38.4 V
7.2 V
2.067 in (52.5 mm)
1.358 in (34.5 mm)
34.5 in (876.3 mm)
1.358 x 1.358 x 2.067 in (34.5 x 34.5 x 52.5 mm)
Socket Mount
30 ms
20 ms
-10 °C (14 °F)
40 °C (104 °F)
Snap-On
CE; CSA; DEMKO; SEV; TUV; UL
100000 Cycle(s)
With LED Indicator and Diode
MK3PND-5-S-DC110
7.3 kΩ
110 V
15 mA
88 V
16.5 V
MK3PND-5-S-DC24
430 Ω
24 V
56 mA
19.2 V
3.6 V
MK3PND-5-S-DC48
T9AS5D12-24
TE Connectivity
TE Connectivity's T9AS5D12-24 is a SPDT power/signal relay with 1 FORM C configuration. It has a max AC contact current of 20A@240VAC and operates at a coil voltage of 24V DC. This relay is commonly used in applications requiring momentary switching control, such as industrial automation and control systems.
SPDT
1 Form C
Random
20 A
240 V
20A@240VAC
28 V
10A@28VDC
75 mΩ
2.8 W
576 Ω
42 mA
18 V
2.4 V
0.803 in (20.4 mm)
1.28 in (32.51 mm)
27.43 in (696.722 mm)
1.28 x 1.08 x 0.803 in (32.51 x 27.43 x 20.4 mm)
26 g
Through Hole-Straight Mount
5
0.1299 in (3.299 mm)
15 ms
-55 °C (-67 °F)
85 °C (185 °F)
2.5 kVrms
1.5 kVrms
1 GΩ
Silver Cadmium Oxide
Solder
CSA; UL
255-5
Teledyne Technologies
Teledyne Technologies' 255-5 DPDT power/signal relay has a latched relay action with operate time of 7ms. It is hermetically sealed, suitable for AC/DC applications with max contact ratings of 0.15A@115VAC and 2A@28VDC. Ideal for industrial automation and control systems due to its compact size and high electrical life of 100000 cycles.
DPDT
Latched
150 mA
115 V
2 A
0.15A@115VAC
2A@28VDC
555 mW
45 Ω
5 V
111 mA
3.8 V
1 V
0.41 in (10.41 mm)
0.81 in (20.57 mm)
10.41 in (264.414 mm)
0.81 x 0.41 x 0.41 in (20.57 x 10.41 x 10.41 mm)
7 ms
-65 °C (-85 °F)
125 °C (257 °F)
Hermetically Sealed
KUEP-11D15-24
TE Connectivity's KUEP-11D15-24 is a DPDT power/signal relay with 2 FORM C configuration. It has an operate time of 15 ms and electrical life of 100,000 cycles. This relay, with a max AC contact current of 10A and DC coil voltage of 24V, is commonly used in applications requiring momentary relay action such as control systems and industrial automation.
2 Form C
10A@240VAC
150 V
10A@150VDC
1.8 W
320 Ω
75 mA
1.906 in (48.4 mm)
1.531 in (38.9 mm)
35.7 in (906.78 mm)
1.531 x 1.406 x 1.906 in (38.9 x 35.7 x 48.4 mm)
85 g
Panel Mount
9
Box; Tray
10 ms
50 °C (122 °F)
70 °C (158 °F)
2.2 kVrms
1.2 kVrms
100 MΩ
Solder/Quick Connect
Dust Proof
KUEP-11D35-24
TE Connectivity's KUEP-11D35-24 is a DPDT power/signal relay with 2 FORM C configuration. With 15ms operate time, it has a max DC contact current of 10A@150VDC. Ideal for applications requiring momentary relay action in environments where dust protection is needed.
KUEP-3D15-110
TE Connectivity's KUEP-3D15-110 is a SPST power/signal relay with 15ms operate time. It has 100000 cycles electrical life, 10A@240VAC max contact AC rating, and is dust-proof. Ideal for applications requiring momentary relay action in environments with temperatures ranging from 50 to 70°C.
SPST
1 Form X
1.25 W
10 kΩ
11 mA
82.5 V
2.248 in (57.1 mm)
1.52 in (38.6 mm)
34.9 in (886.46 mm)
KUEP-3D15-24
TE Connectivity's KUEP-3D15-24 is a power & signal relay with SPST function and 1 FORM X form. It has an operate time of 15 ms, electrical life of 100000 cycles, and insulation resistance of 100000000 ohm. This relay is commonly used in applications requiring momentary relay action and can handle max AC contact current of 10 A.
472 Ω
50 mA
KUEP-3D15-48
TE Connectivity's KUEP-3D15-48 is a SPST power/signal relay with 1 FORM X configuration. With operate time of 15ms, it has max AC contact current of 10A@150VDC. Ideal for panel mounting applications requiring dust-proof sealing and random input switching control.
1.3 W
1.8 kΩ
25 mA
36 V
0.1575 in (4 mm)
KUEP-3D17-12
TE Connectivity's KUEP-3D17-12 is a SPST power/signal relay with 1 FORM X configuration. With an operate time of 15ms and electrical life of 100,000 cycles, it is ideal for applications requiring momentary relay action. Featuring dust-proof sealing and dimensions of 38.9mm x 35.7mm x 48.4mm, this relay has a max AC contact current of 10A@150VDC and is suitable for panel mounting in various electronic systems.
1.2 W
120 Ω
12 V
100 mA
9 V
0.0394 in (1.001 mm)
KUEP-3D35-24
TE Connectivity's KUEP-3D35-24 is a SPST power/signal relay with 1 FORM X configuration. With 15ms operate time, it offers 100000 cycles electrical life and insulation resistance of 100MΩ. Ideal for applications requiring momentary relay action, it has a max AC contact current of 10A and operates at temperatures ranging from 50°C to 70°C.
KUEP-7D15-12
TE Connectivity's KUEP-7D15-12 is a DPST relay with 2 FORM A configuration, operating at 9V DC coil voltage. With a max AC contact current of 10A@150VDC, it's ideal for power/signal relay applications requiring dust-proof sealing and quick connect solder termination. Measuring 38.9mm x 35.7mm x 48.4mm and weighing 85g, this relay offers high insulation resistance of 100MΩ and dielectric strength b/w coil & contacts of 2200Vrms.
DPST
2 Form A
80 Ω
KUEP-7D15-48
TE Connectivity's KUEP-7D15-48 is a DPST relay with 2 FORM A, 15ms operate time, and 100000 cycle electrical life. Ideal for power & signal applications, it has a max AC contact current of 10A@150VDC, operates at temperatures b/w 50-70°C, and features dust-proof sealing.
1.85 W
1.25 kΩ
38 mA
KUMP-14D18-24
TE Connectivity's KUMP-14D18-24 is a 3PDT power/signal relay with 15A@277VAC contact rating. With a 15ms operate time and 100000 cycle electrical life, it offers momentary relay action. Ideal for panel mounting applications, this dust-proof relay has a compact size of 38.9mm x 35.7mm x 48.4mm and operates at temperatures ranging from 50 to 70°C.
3 Form C
15 A
277 V
15A@277VAC
15A@28VDC
1.969 in (50 mm)
Tray
KUP-14D15-6
TE Connectivity's KUP-14D15-6 is a 3PDT power/signal relay with 15ms operate time and 10000 cycle electrical life. With 10A@120VAC max contact AC rating, it's ideal for applications requiring momentary relay action in dust-proof environments. Measuring 38.9mm x 35.7mm x 48.4mm and weighing 85g, it features a coil resistance of 32 ohm and operates at temperatures b/w -50°C to +70°C.
10A@120VAC
1.125 W
32 Ω
6 V
200 mA
4.5 V
10000 Cycle(s)
T90S1D12-12
TE Connectivity's T90S1D12-12 is a SPST power/signal relay with 15ms operate/release time. It has a max AC contact current of 30A and operates at temperatures ranging from -55°C to 85°C. Ideal for applications requiring momentary relay action in AC/DC circuits.
30 A
900 mW
155 Ω
78 mA
0.665 in (16.9 mm)
1.201 in (30.5 mm)
24.1 in (612.14 mm)
1.201 x 0.949 x 0.665 in (30.5 x 24.1 x 16.9 mm)
SP4-P-DC12V
Panasonic
SP4-P-DC12V by Panasonic is a 4PDT power/signal relay with a max contact DC rating of 10A@30VDC. It has an operate time of 30ms and can handle a max AC contact current of 10A. This relay is commonly used in applications requiring high power switching and signal control.
4PDT
4 Form C
30 V
10A@30VDC
2500VA@250VAC
300W@30VDC
30 mΩ
300 mW
480 Ω
8.4 V
1.2 V
0.866 in (22 mm)
36.8 in (934.72 mm)
1.969 x 1.449 x 0.866 in (50 x 36.8 x 22 mm)
65 g
16
Box
-50 °C (-58 °F)
60 °C (140 °F)
3 kVrms
Silver Tin Oxide
Gold
CSA; TUV; UL
AZ952-1CH-24DE
American Zettler
AZ952-1CH-24DE by American Zettler is a SPDT power/signal relay with 1 FORM C configuration. It has an operate time of 5 ms and an electrical life of 100000 cycles. This relay is commonly used in applications requiring AC/DC contact supply, with a max contact rating of 5A@300VAC and a max DC power rating of 150W@60VDC.
5 A
300 V
5A@300VAC
5A@150VDC
625VA@300VAC
150W@60VDC
50 mΩ
1.28 kΩ
32 V
0.465 in (11.81 mm)
0.62 in (15.75 mm)
10.75 in (273.05 mm)
0.62 x 0.423 x 0.465 in (15.75 x 10.75 x 11.81 mm)
3.5 g
0.126 in (3.2 mm)
5 ms
1 ms
-25 °C (-13 °F)
55 °C (131 °F)
1 kVrms
500 Vrms
Silver Nickel
Tin
UL
e3
Epoxy
AZ952
AZ9711-1A-12DET
American Zettler's AZ9711-1A-12DET is a 1 FORM C SPDT power/signal relay with 5ms operate time and 100000 cycles electrical life. With a max contact DC power rating of 630W@150VDC, it is ideal for applications requiring latched relay action in temperatures ranging from -40°C to 125°C.
45 A
45A@150VDC
630W@150VDC
100 mΩ
90 Ω
19.6 V
6.8 V
0.878 in (22.3 mm)
1.043 in (26.5 mm)
22 in (558.8 mm)
1.043 x 0.866 x 0.878 in (26.5 x 22 x 22.3 mm)
20 g
7
0.1417 in (3.599 mm)
3 ms
-40 °C (-40 °F)
G7L-2A-P-PVDC12
POWER/SIGNAL RELAY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: UL; VDE; Relay Form: 2 FORM A; Body Width: 35.5 inch;
AC
280 V
30A@280VAC
2.3 W
63 Ω
13.2 V
1.614 in (41 mm)
35.5 in (901.7 mm)
2.067 x 1.398 x 1.614 in (52.5 x 35.5 x 41 mm)
100 g
6
0.2362 in (5.999 mm)
4 kVrms
2 kVrms
Silver Alloy
UL; VDE
30000 Cycle(s)
G7L-2A-P-PVDC24
POWER/SIGNAL RELAY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: UL; VDE; Body Height: 41 mm; Termination Type: SOLDER;
240 Ω
26.4 V
AEV18012
Panasonic AEV18012 is a SPST power/signal relay with 50ms operate time and 1000 cycles electrical life. Ideal for applications requiring momentary relay action, it has a max DC contact voltage of 400V and can handle up to 80A@400VDC.
80 A
400 V
80A@400VDC
4.5 W
375 mA
3.11 in (79 mm)
2.972 in (75.5 mm)
40 in (1016 mm)
2.972 x 1.575 x 3.11 in (75.5 x 40 x 79 mm)
Bulk
50 ms
80 °C (176 °F)
Connector
1000 Cycle(s)
AEV18024
Panasonic AEV18024 is a SPST power/signal relay with 50ms operate time and 1000 cycles electrical life. It has a max DC contact rating of 80A@400VDC, making it ideal for applications requiring high current switching in industrial settings. With dimensions of 75.5mm x 40mm x 79mm, it is suitable for panel mounting and uses a DC coil with an operate voltage of 18V and release voltage of 2V.
127.66 Ω
188 mA
2 V
AEV19012
AEV19012 by Panasonic is a SPST power/signal relay with 30ms operate time and 1000 cycles electrical life. It has a max contact rating of 300A@400VDC, making it ideal for high-power DC applications such as automotive systems or industrial machinery. With dimensions of 111mm x 63mm x 73.4mm, it features a momentary relay action and operates on a DC coil voltage of up to 12V.
300 A
300A@400VDC
40 W
3.64 Ω
3.3 A
2.89 in (73.4 mm)
4.37 in (111 mm)
63 in (1600.2 mm)
4.37 x 2.48 x 2.89 in (111 x 63 x 73.4 mm)
ALE1PB12
Panasonic ALE1PB12 is a SPST power/signal relay with 20ms operate time. It has a max AC contact current of 16A@277VAC, making it suitable for applications requiring momentary relay action in power systems. With compact dimensions of 28.6mm x 12.4mm x 24.9mm and through-hole mounting feature, it is ideal for industrial automation and control systems where space-saving and reliable switching capabilities are essential.
16 A
16A@277VAC
400 mW
360 Ω
33 mA
600 mV
0.98 in (24.9 mm)
1.126 in (28.6 mm)
12.4 in (314.96 mm)
1.126 x 0.488 x 0.98 in (28.6 x 12.4 x 24.9 mm)
Box; Bulk
CSA; SEMKO; TUV; UL; VDE
Release Time with Diode
ALE1PB18
Panasonic ALE1PB18 is a SPST power/signal relay with 20ms operate/release time. It has 100000 cycles electrical life, 16A@277VAC max contact AC rating. Ideal for applications requiring momentary relay action in temperatures ranging from -40°C to 85°C.
810 Ω
22 mA
13.5 V
900 mV
ALE1PB48
Panasonic ALE1PB48 is a SPST power/signal relay with 20ms operate/release time, 100000 cycles electrical life. It has 16A@277VAC contact rating and operates at -40 to 85°C. Ideal for AC applications requiring momentary relay action in industrial settings.
5.76 kΩ
8 mA
DK1A-L2-24V-F
Panasonic's DK1A-L2-24V-F is a SPST power/signal relay with 10ms operate time and 100000 cycles electrical life. It has a latched relay action, operates at -40 to 65 °C, and supports AC/DC contact supply type. Ideal for applications requiring a compact relay with high durability and low coil power consumption.
125 V
10A@125VDC
200 mW
2.88 kΩ
16.8 V
0.394 in (10 mm)
0.787 in (20 mm)
12.5 in (317.5 mm)
0.787 x 0.492 x 0.394 in (20 x 12.5 x 10 mm)
Box; Tube
8 ms
65 °C (149 °F)
Gold Flash
CSA; TUV; UL; VDE
Release Time without Diode
DK1A-L2-5V-F
Panasonic's DK1A-L2-5V-F is a SPST power/signal relay with 10ms operate time and 100000 cycles electrical life. Ideal for AC/DC applications, it has a max contact rating of 10A@250VAC and operates at temperatures ranging from -40 to 65°C.
125 Ω
40 mA
3.5 V
G2R-1-DC110
POWER/SIGNAL RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; SEMKO; TUV; UL; VDE;
530 mW
22.9 kΩ
5 mA
77 V
1.004 in (25.5 mm)
1.142 in (29 mm)
13 in (330.2 mm)
1.142 x 0.512 x 1.004 in (29 x 13 x 25.5 mm)
17 g
G2R-1-DC3
Omron's G2R-1-DC3 is a SPDT power/signal relay with 15ms operate time. It has 10A@250VAC AC contact rating and 10A@30VDC DC contact rating. Ideal for applications requiring momentary relay action in industrial automation and control systems.
17 Ω
3 V
176 mA
2.1 V
450 mV
G2R-1DC48
1 Form A
4.17 kΩ
12 mA
33.6 V
5 kVrms
G2R-1-E-DC110
16A@250VAC
16A@30VDC
4000VA@250VAC
480W@30VDC
8A@250VAC
8
G2R-1-EDC48
G2R-1-EDC6
68 Ω
88 mA
4.2 V
G2R-1-HDC12
Omron G2R-1-HDC12 is a 12V power/signal relay with SPDT form, 15ms operate time, and 100000 cycle electrical life. Ideal for applications requiring momentary relay action, it has a max AC contact current of 5A@250VAC and operates in temperatures ranging from -40 to 70°C.
5A@250VAC
5A@30VDC
360 mW
400 Ω
1.8 V
G2R-1-HDC48
6.4 kΩ
G2R-1-HDC5
70 Ω
71 mA
750 mV
G2R-1-HDC6
100 Ω
60 mA
G2R-1-T-DC110
POWER/SIGNAL RELAY; Mounting Feature: PANEL MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CSA; SEMKO; TUV; UL; VDE;
7.5A@250VAC
1.161 in (29.5 mm)
1.772 in (45 mm)
14 in (355.6 mm)
1.772 x 0.551 x 1.161 in (45 x 14 x 29.5 mm)
0.3543 in (8.999 mm)
Quick Connect
G2R-1-TDC5
Omron's G2R-1-TDC5 is a 1 FORM A SPDT power/signal relay with 15ms operate time. It has 6 terminals, operates at -40 to 70 °C, and supports AC/DC contact supply type. With dielectric strength of 1000 Vrms b/w open contacts, it's ideal for panel mounting applications requiring high reliability and quick switching control.
47 Ω
106 mA
G2R-1-TDC6
G2R-14-DC110
G2R-14DC48
G2R-14DC6
G2R-14-H-DC12
1250VA@380VAC
150W@125VDC
2A@250VAC
© 2023 All rights reserved
