Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
PTN78060AAH
Texas Instruments
PTN78060AAH by Texas Instruments is a switching regulator with 3A output current, -15V to -3V output voltage range, and 9-28.7V input voltage support. It utilizes pulse width modulation control technique in a compact rectangular package for industrial applications requiring efficient power conversion.
OUTPUT VOLTAGE ADJUST RANGE -15V TO -3V
SWITCHING REGULATOR
PULSE WIDTH MODULATION
28.7 V
9 V
20 V
R-PXMA-P7
e3
25.27 mm
1
7
85 Cel
-40 Cel
3 A
-3 V
-15 V
PLASTIC/EPOXY
RECTANGULAR
MICROELECTRONIC ASSEMBLY
NOT SPECIFIED
Not Qualified
9 mm
NO
BUCK-BOOST
.66 kHz
HYBRID
INDUSTRIAL
Matte Tin (Sn)
PIN/PEG
UNSPECIFIED
15.75 mm
PTN78060AAST
PTN78060AAST by Texas Instruments is a switching regulator with max output current of 3A, PWM control technique, and buck-boost switcher config. It operates in industrial temp range (-40 to 85°C) and has input voltage range from 9V to 28.7V. Ideal for applications requiring efficient power conversion in compact spaces.
R-PDMA-B7
e0
9.57 mm
YES
Tin/Lead (Sn/Pb)
BALL
DUAL
PTN78060AAS
PTN78060AAS by Texas Instruments is a switching regulator with 3A output current, -15V min output voltage, and 20V nominal input voltage. It is used in industrial applications for power conversion with a buck-boost switcher configuration and pulse width modulation control technique.
PTN78060AAZT
PTN78060AAZT by Texas Instruments is a switching regulator with 3A output current, -15V min output voltage, and 20V nominal input voltage. It is used in industrial applications for power management due to its buck-boost switcher configuration and pulse width modulation control technique.
e1
3
260
Tin/Silver/Copper (Sn/Ag/Cu)
PTN78060AAZ
PTN78060AAZ by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 85°C, and input voltage range from 9V to 28.7V. It's ideal for industrial applications requiring pulse width modulation control technique in a compact microelectronic assembly package.
PTN78060HAH
PTN78060HAH by Texas Instruments is a 3A switching regulator with a 5V output voltage, ideal for industrial applications. It operates b/w -40 to 85°C, accepting input voltages from 15-36V. With a max frequency of 660kHz and PWM control technique, it offers efficient power conversion in a compact MICROELECTRONIC ASSEMBLY package.
VOUT=2.5 TO 12.6 VOLT AND VOUT=11.85 TO 22 VOLT
36 V
15 V
R-XDMA-P7
22 V
11.85 V
5 V
BUCK
660 kHz
PTN78060HAST
PTN78060HAST by Texas Instruments is a 7-terminal switching regulator in MICROELECTRONIC ASSEMBLY package. It features TIN LEAD finish, HYBRID technology, and MSL of 3. Ideal for power management applications requiring efficient voltage regulation.
R-XDMA-X7
TIN LEAD
PTN78060HAS
PTN78060HAS by Texas Instruments is a 7-terminal switching regulator with a max output current of 3A and PWM control technique. It operates b/w -40 to 85°C, suitable for industrial applications. With a buck switcher config, it offers an output voltage range from 11.85V to 22V, making it ideal for power management systems.
R-XDMA-B7
PTN78060HAZT
PTN78060HAZT by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 85°C. It offers an output voltage range of 11.85V to 22V at a max current of 3A, suitable for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and PULSE WIDTH MODULATION control technique.
PTN78060HAZ
PTN78060HAZ by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 85°C. It offers an output voltage range of 11.85V to 22V at a max current of 3A, suitable for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package and PULSE WIDTH MODULATION control technique.
TPS54615PWPG4
TPS54615PWPG4 by Texas Instruments is a 28-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 125 °C. It offers a max output current of 12 A, peak frequency of 762 kHz, and is ideal for automotive applications due to its compact size and efficient BUCK switcher configuration.
VOLTAGE-MODE
6 V
3 V
R-PDSO-G28
e4
9.7 mm
2
28
125 Cel
12 A
2.575 V
2.425 V
2.5 V
HTSSOP
TSSOP28,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.2 mm
Switching Regulator or Controllers
762 kHz
AUTOMOTIVE
Nickel/Palladium/Gold (Ni/Pd/Au)
GULL WING
.65 mm
4.4 mm
UC3854ADWG4
UC3854ADWG4 by Texas Instruments is a current-mode switching regulator with 1.5A output current, 120kHz max switching frequency, and boost configuration. It operates b/w 0-70°C, ideal for power factor control applications in commercial-grade environments. The IC features a small outline package with dual terminals and pulse width modulation control technique.
POWER FACTOR CONTROLLER
CURRENT-MODE
10 V
18 V
R-PDSO-G16
10.3 mm
16
70 Cel
0 Cel
1.5 A
7.6 V
7.4 V
7.5 V
SOP
SOP16,.4
SMALL OUTLINE
2.65 mm
12 mA
BOOST
120 kHz
BIPOLAR
COMMERCIAL
1.27 mm
7.5 mm
UC3854ADWTRG4
UC3854ADWTRG4 by Texas Instruments is a current-mode switching regulator with a 1.5A output current and 120kHz max switching frequency. It operates b/w 0-70°C, suitable for power factor control applications. With a compact small outline package and boost switcher configuration, it offers efficient power management solutions.
HPA00234DRCRG4
Texas Instruments HPA00234DRCRG4 is a switching regulator with 85% efficiency, 1.26A output current, and 1200 kHz max switching frequency. Ideal for industrial applications due to its -40 to 85°C operating temperature range and boost configuration for voltage regulation in compact spaces.
ALSO OPERATES IN PFM CONTROL TECHNIQUE, OUTPUT VOLTAGE RANGE IS 2.5 TO 27V
CURRENT/VOLTAGE-MODE
85 %
3.6 V
S-PDSO-N10
3 mm
10
1.26 A
27 V
HVSON
SQUARE
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
1200 kHz
NO LEAD
.5 mm
HPA00483DRBR
Texas Instruments HPA00483DRBR is a switching regulator with 8 terminals, operating b/w -40 to 85°C. It offers a current-mode control technique, boosting output voltage up to 28V at 1000 kHz frequency. Ideal for industrial applications requiring precise power management in compact spaces.
OUTPUT VOLTAGE RANGE IS 1.8 TO 28V
PULSE FREQUENCY MODULATION
1.8 V
2.4 V
S-PDSO-N8
8
.45 A
28 V
1000 kHz
HPA01123DDAR
Texas Instruments HPA01123DDAR is a switching regulator with 8 terminals, operating b/w -40 to 85°C. It offers a max output current of 5A, voltage range from 0.76V to 6V, and a compact rectangular package ideal for industrial applications.
4.5 V
R-PDSO-G8
4.89 mm
5 A
.76 V
LSOP
SMALL OUTLINE, LOW PROFILE
1.7 mm
650 kHz
30
3.9 mm
LP875484YFQR
LP875484YFQR by Texas Instruments is a 10A switching regulator with 6 outputs. It operates at -40 to 85°C, with PWM control technique and BUCK switcher config. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATES IN PFM CONTROL TECHNIQUE; ADJUSTABLE OUTPUT MODE FROM 0.6 TO 1.67V
3.7 V
R-PBGA-B49
2.992 mm
6
49
10 A
1.67 V
.6 V
1.1 V
VFBGA
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.675 mm
4000 kHz
TIN SILVER COPPER
.4 mm
BOTTOM
2.852 mm
LP875494YFQR
SWITCHING REGULATOR; Terminal Finish: TIN SILVER COPPER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e1;
SN1208057RTER
SN1208057RTER by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 150°C, and max output current of 11.5A. It is designed for automotive applications, featuring a control mode of current-mode and a switcher configuration of buck. The IC has a compact square package style suitable for surface mount assembly in various electronic devices.
3.3 V
S-PQCC-N16
150 Cel
11.5 A
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.8 mm
2000 kHz
NICKEL PALLADIUM GOLD
QUAD
SN1208058RHLR
SN1208058RHLR by Texas Instruments is a 14-terminal switching regulator with a max output current of 14A and a control mode of current-mode. With a wide operating temperature range from -40 to 150°C, it is ideal for automotive applications requiring high efficiency and precise voltage regulation up to 1760kHz switching frequency.
ALSO REQUIRED INPUT VOLTAGE IS 1.6 TO 17V, ALSO OPERATES IN ADJUSTABLE MODE AS LOW AS 0.6VREF
17 V
12 V
S-PQCC-N14
3.5 mm
14
14 A
1760 kHz
TPS40200HDR
TPS40200HDR by Texas Instruments is a voltage-mode switching controller with a max output current of 3A and max operating temperature of 175°C. It operates on input voltages ranging from 4.5V to 52V, making it suitable for military-grade applications requiring high efficiency and precise voltage regulation up to 46V output.
SWITCHING CONTROLLER
52 V
4.9 mm
175 Cel
-55 Cel
46 V
.7 V
1.75 mm
SINGLE
500 kHz
MILITARY
TPS54325PWP
TPS54325PWP by Texas Instruments is a switching regulator with 3A output current, 700kHz max frequency, and VOLTAGE-MODE control. Ideal for industrial applications requiring a compact design, it operates b/w -40 to 85°C with input voltage range of 4.5-18V and output voltage up to 5.5V.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
R-PDSO-G14
5 mm
5.5 V
TSSOP14,.25
700 kHz
TPS5420MDREPG4
TPS5420MDREPG4 by Texas Instruments is a VOLTAGE-MODE switching regulator with 2A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for military applications due to its MILITARY temperature grade, it operates b/w -55°C to 125°C and supports input voltages from 5.5V to 36V.
ALSO ADJUSTABLE TO 1.22V
2 A
31 V
1.23 V
TPS55383PWPRG4
TPS55383PWPRG4 by Texas Instruments is a dual switching controller with 3A max output current, operating at -40 to 125°C. It features a control mode of current-mode PWM and supports input voltages from 4.5V to 28V. Ideal for automotive applications due to its small outline package style and high temp grade.
DUAL SWITCHING CONTROLLER
25.2 V
.8 V
TSSOP16,.25
PHASE-SHIFT
300 kHz
TPS53126PWR
TPS53126PWR by Texas Instruments is a dual switching controller with a max output current of 15A and a max switching frequency of 700kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring precise voltage regulation in compact spaces.
24 V
R-PDSO-G24
7.8 mm
24
15 A
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
PUSH-PULL
TPS53126RGET
TPS53126RGET by Texas Instruments is a dual switching controller with a max output current of 15A and a control mode of voltage-mode. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring efficient power management. With a compact chip carrier package style and push-pull switcher configuration, this device is ideal for space-constrained designs that demand high performance.
S-PQCC-N24
4 mm
LCC24,.16SQ,20
.8 mA
TPS54418RTET
TPS54418RTET by Texas Instruments is a 16-terminal switching regulator with a max output current of 4A and a control mode of current-mode PWM. With a wide input voltage range from 2.95V to 6V, it's ideal for automotive applications requiring precise voltage regulation in compact spaces.
2.95 V
4 A
LCC16,.12SQ,20
TPS54612PWPRG4
TPS54612PWPRG4 by Texas Instruments is a voltage-mode switching regulator with 12A output current and 762kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, with a min input voltage of 3V and max of 6V. The compact package style features a small outline and thin profile for space-constrained designs.
1.2 V
TPS61059DRCRG4
TPS61059DRCRG4 by Texas Instruments is a voltage-mode switching regulator with a boost configuration. It operates b/w -40 to 85°C, supporting input voltages from 2.7V to 5.5V and output currents up to 1.8A. Ideal for industrial applications requiring high efficiency and compact design in a small outline package.
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V
2.7 V
1.8 A
SOLCC10,.12,20
750 kHz
TPS61059DRCR
TPS61059DRCR by Texas Instruments is a switching regulator with a max output current of 1.8A and a max switching frequency of 750kHz. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control mode and boost switcher configuration, ideal for applications with input voltages ranging from 2.7V to 5.5V.
TPS61059DRCT
TPS61059DRCT by Texas Instruments is a VOLTAGE-MODE SWITCHING REGULATOR with 1.8A output current, 750kHz switching frequency, and 3.6V nominal input voltage. It is ideal for industrial applications requiring BOOST configuration in a small outline package with surface mount capability.
TPS63700DRCRG4
TPS63700DRCRG4 by Texas Instruments is a switching regulator with a max output current of 1.14A and a control mode of current-mode PWM. It operates in industrial temperature range (-40 to 85°C) and has a compact package style suitable for various applications like portable electronics and power management systems.
ALSO OPERATES IN ADJUSTABLE MODE FROM -2 TO -15V
1.14 A
-2 V
1380 kHz
UCC2541PWPG4
UCC2541PWPG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 3.5A and a max switching frequency of 330kHz. It operates in an industrial temperature range from -40 to 105°C, making it suitable for various power management applications requiring high efficiency and precise control. The IC features a small outline package with gull wing terminals, ideal for space-constrained designs that demand reliable performance.
AVERAGE CURRENT MODE OPERATION IS ALSO POSSIBLE
35 V
8.5 V
R-PDSO-G20
6.5 mm
20
105 Cel
3.5 A
TSSOP20,.25
330 kHz
UCC2541RHBRG4
UCC2541RHBRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 3.5A and a max switching frequency of 330kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications requiring high efficiency and precise control. The chip carrier package style with a very thin profile and no-lead terminal form offers space-saving benefits for compact designs.
S-PQCC-N32
32
LCC32,.2SQ,20
UCC2541RHBT
UCC2541RHBT by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 32 terminals in a CHIP CARRIER package. It operates b/w -40 to 105 °C, supporting input voltages from 8.5V to 35V and output currents up to 3.5A. Ideal for industrial applications requiring high-frequency PWM control in compact designs.
TPS40222DRPRG4
TPS40222DRPRG4 by Texas Instruments is a switching regulator with a max output current of 1.6A and max operating temp of 125°C. Ideal for automotive applications, it features a control mode of current-mode PWM and operates at a max switching frequency of 1250kHz.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 7.2V
8 V
S-PDSO-N6
1.6 A
7 V
1250 kHz
.95 mm
TPS54317RHFRG4
TPS54317RHFRG4 by Texas Instruments is a 24-terminal switching regulator with a max output current of 6A and a control mode of voltage-mode. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring precise voltage regulation in compact spaces.
R-PQCC-N24
6 A
.9 V
1600 kHz
TPS54317RHFTG4
TPS54317RHFTG4 by Texas Instruments is a 24-terminal switching regulator with a max output current of 3A and voltage range from 0.9V to 3.3V, suitable for automotive applications. Operating at temperatures from -40°C to 125°C, it utilizes pulse width modulation control mode with a max switching frequency of 1600kHz for efficient power management in compact designs.
TPS54317RHFT
TPS54317RHFT by Texas Instruments is a 24-terminal switching regulator with a max output current of 3A and a control mode of voltage-mode. It operates b/w -40 to 125°C, making it suitable for automotive applications. With a compact chip carrier package style, it offers pulse width modulation control technique at a high frequency of 1600 kHz.
TL594IPWE4
TL594IPWE4 by Texas Instruments is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 85°C, with a max output current of 0.25A and a max switching frequency of 300kHz. Ideal for industrial applications requiring pulse width modulation in push-pull switcher configuration.
40 V
.25 A
TL594IPWG4
TL594IPWG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.25A and a max switching frequency of 300kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various push-pull switcher applications. The IC features a small outline package style with dual terminal position and gull wing form factor.
TL594IPWRG4
TL594IPWRG4 by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85 °C. It has a boost switcher config, PWM control technique, and max output current of 0.25 A. Ideal for industrial applications requiring precise voltage regulation up to 5.05 V at 300 kHz frequency.
5.05 V
4.95 V
18 mA
UC2842D8G4
UC2842D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique at a max switching frequency of 500 kHz. Ideal for buck-boost configurations, it has a nominal input voltage of 15V and can handle up to 1A output current.
11 V
1 A
SOP8,.25
25 mA
16 V
BICMOS
UC2843D8G4
UC2843D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates at temperatures from -40 to 85 °C, with a max output current of 1A and switching frequency of 500kHz. Ideal for industrial applications requiring pulse width modulation control in buck-boost configurations.
8.2 V
8.4 V
UC2843NG4
UC2843NG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports pulse width modulation control technique. Ideal for buck-boost applications, it has a max output current of 1A and can handle supply voltages from 8.2V to 28V.
R-PDIP-T8
9.59 mm
DIP
DIP8,.3
IN-LINE
5.08 mm
THROUGH-HOLE
2.54 mm
7.62 mm
UC2844DG4
UC2844DG4 by Texas Instruments is a switching controller with BICMOS technology. It operates at -40 to 85°C, supports PWM control mode, and has a max output current of 1A. Ideal for industrial applications requiring buck-boost switcher config and a max switching frequency of 500kHz.
8.65 mm
SOP14,.25
UC2845D8G4
UC2845D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique. With a max output current of 1A, it is ideal for buck-boost applications at up to 500kHz switching frequency.
UC2845DG4
UC2845DG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique up to 500 kHz. Ideal for buck-boost configurations, it has a max output current of 1A and nominal input voltage of 15V, making it suitable for various power supply applications.
© 2023 All rights reserved
