Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MAX1966ESA
Maxim Integrated
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING CONTROLLER
VOLTAGE-MODE
PULSE WIDTH MODULATION
5.5 V
2.7 V
5 V
R-PDSO-G8
e0
4.9 mm
1
8
85 Cel
-40 Cel
1 A
PLASTIC/EPOXY
SOP
SOP8,.25
RECTANGULAR
SMALL OUTLINE
245
Not Qualified
1.75 mm
Switching Regulator or Controllers
YES
PUSH-PULL
127 kHz
BICMOS
INDUSTRIAL
TIN LEAD
GULL WING
1.27 mm
DUAL
3.9 mm
NCP1051P44
Onsemi
NCP1051P44 by Onsemi is a VOLTAGE-MODE control SWITCHING REGULATOR with 2A output current, operating at -40 to 125 °C. Ideal for automotive applications, it has an input voltage range of 7.5-8.5V and a max switching frequency of 50 kHz in an IN-LINE package style.
SWITCHING REGULATOR
8.5 V
7.5 V
8 V
R-PDIP-T8
9.78 mm
125 Cel
2 A
DIP
DIP8,.3
IN-LINE
235
4.45 mm
NO
SINGLE
50 kHz
AUTOMOTIVE
THROUGH-HOLE
2.54 mm
7.62 mm
NCP1053P44
NCP1053P44 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating at -40 to 125 °C. Ideal for automotive applications, it has an input voltage range of 7.5-8.5V and operates at a max frequency of 50 kHz in a RECTANGULAR PLASTIC package style.
NCP1055P44
NCP1055P44 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, 50kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125 °C and has an input voltage range of 7.5-8.5V.
L6590N
STMicroelectronics
L6590N by STMicroelectronics is a versatile switching regulator designed for boost applications. It features a nominal input voltage of 10V, max output current of 0.7A, and operates at a switching frequency of 74kHz. Ideal for efficient power management in various electronic devices.
10 V
.7 A
5.08 mm
BOOST
74 kHz
BCDMOS
ICE2AS01G
Infineon Technologies
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1;
CURRENT-MODE
21 V
9 V
15 V
e3
5 mm
NOT SPECIFIED
1.73 mm
107 kHz
4 mm
ICE2AS01
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
9.52 mm
4.37 mm
MATTE TIN
ICE2BS01G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
3
260
72 kHz
ICE2BS01
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
MC34063EBD
MC34063EBD by STMicroelectronics is a versatile switching regulator with a max output current of 1.5 A and operates b/w -40 °C to 125 °C. It supports input voltages from 3 V to 40 V, making it ideal for automotive applications. Its compact design features an 8-terminal surface mount package.
40 V
3 V
e4
1.5 A
100 kHz
BIPOLAR
NICKEL PALLADIUM GOLD
MC34063ECD
MC34063ECD by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current and 100kHz max switching frequency. It operates b/w 3-40V input range, ideal for boost applications in commercial temperature grade environments. The IC comes in an 8-terminal small outline package with gull wing terminals, suitable for surface mount assembly.
70 Cel
0 Cel
COMMERCIAL
MAX860ESA-T
MAX860ESA-T by Maxim Integrated is a small outline switching regulator with 8 terminals. It operates b/w -40 to 85°C, suitable for industrial applications. With a max output current of 0.06A and a switching frequency of 130kHz, it is ideal for switched capacitor converter circuits.
SWITCHED CAPACITOR CONVERTER
1.5 V
.06 A
Other Analog ICs
DOUBLER INVERTER
130 kHz
CMOS
VIPER22ADIP
VIPER22ADIP by STMicroelectronics is a switching regulator with 8 terminals in an in-line package. It operates at a max frequency of 66 kHz and can handle up to 0.84 A output current. Ideal for applications requiring pulse width modulation control, such as power supplies and voltage converters.
38 V
18 V
9.27 mm
.84 A
5.33 mm
66 kHz
VIPER22AS
VIPER22AS by STMicroelectronics is a switching regulator with a max output current of 0.84A and a max switching frequency of 66kHz. It is commonly used in applications such as power supplies and voltage converters.
UCC2804D/81221
Texas Instruments
UCC2804D/81221 by Texas Instruments is a current-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management. The small outline package with gull wing terminals enables surface mount assembly in space-constrained designs.
12 V
1000 kHz
UCC2804DTR/81221
UCC2804DTR/81221 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management in compact designs.
NCP1530DM25R2
NCP1530DM25R2 by Onsemi is a current-mode switching regulator with a max output current of 0.6A and a max switching frequency of 720kHz. It operates b/w temperatures of 0 to 85 °C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
2.75 V
3.5 V
S-PDSO-G8
3 mm
.6 A
TSSOP
TSSOP8,.19
SQUARE
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
BUCK
720 kHz
OTHER
.65 mm
NCP1530DM27R2
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
2.97 V
3.7 V
NCP1530DM30R2
NCP1530DM30R2 by Onsemi is a current-mode switching regulator with a max output current of 0.6A and a max switching frequency of 720kHz. It operates b/w 0-85 °C, suitable for applications requiring efficient power management in compact spaces. The package style is small outline, thin profile, shrink pitch, making it ideal for surface mount designs.
3.3 V
4 V
NCP1530DM33R2
NCP1530DM33R2 by Onsemi is a current-mode switching regulator with max output current of 0.6A and max switching frequency of 720kHz. It operates b/w 0-85 °C, ideal for applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration for precise voltage regulation.
3.63 V
4.3 V
NCP1030DMR2
NCP1030DMR2 by Onsemi is a VOLTAGE-MODE switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 0.68 A and operates at a frequency of up to 1000 kHz. Ideal for automotive applications due to its BCDMOS technology and BOOST switcher configuration.
16 V
.68 A
Tin/Lead (Sn/Pb)
30
UCC2977PWR
UCC2977PWR by Texas Instruments is a CMOS switching regulator with 3-13.5V input voltage range, operating at -40 to 85°C. It features resonant control, push-pull configuration, and 105kHz max switching frequency. Ideal for industrial applications like fluorescent light control due to its compact thin profile package design.
FLUORESCENT LIGHT CONTROLLER
RESONANT CONTROL
13.5 V
4.4 mm
TSSOP8,.25
3/13.5
1.2 mm
105 kHz
UCC2803QDREP
UCC2803QDREP by Texas Instruments is a current-mode switching controller with a 1A output current and BUCK-BOOST switcher configuration. Operating temperature range from -40 to 125°C makes it suitable for automotive applications. With a max switching frequency of 1000 kHz, this IC has a small outline package style ideal for space-constrained designs.
4.06 V
3.94 V
30 mA
4.1 V
BUCK-BOOST
3.905 mm
UCC2804QDRQ1
UCC2804QDRQ1 by Texas Instruments is a switching controller with a current-mode control technique. It operates in automotive-grade conditions with a temperature range of -40 to 125°C. This BICMOS technology IC has a max output current of 1A and supports buck-boost switcher configuration, making it ideal for automotive power supply applications.
5.075 V
4.925 V
AEC-Q100
12.5 V
UCC28083D
UCC28083D by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring precise power regulation in compact designs. The package style is small outline with surface mount capability, ideal for space-constrained electronic systems.
9.3 V
Nickel/Palladium/Gold (Ni/Pd/Au)
UCC28083PWR
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28084PWR
UCC28084PWR by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications. The package style is small outline, thin profile, shrink pitch with gull wing terminal form.
2
UCC28085DR
UCC28085DR by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various push-pull switcher applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
UCC28085D
UCC28085D by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1MHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management. With its small outline package style and push-pull switcher configuration, this BICMOS technology-based device is ideal for compact designs in industries like automotive and consumer electronics.
UCC28085PWR
UCC28085PWR by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise power management in compact spaces. The package style is small outline, thin profile, shrink pitch with gull wing terminals, ideal for surface mount designs.
UCC28086DR
UCC28086DR by Texas Instruments is a switching controller with current-mode control technique. It operates in an industrial temperature grade range from -40°C to 85°C, suitable for various applications. With a max output current of 1A and a max switching frequency of 1000 kHz, it is ideal for push-pull switcher configurations.
UCC28086D
UCC28086D by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management. The small outline package style with surface mount capability enhances its versatility in compact electronic designs.
UCC28086PW
UCC28086PW by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power supply applications requiring high efficiency and precise control. The IC features pulse width modulation control technique and push-pull switcher configuration in a small outline package with surface mount capability.
UCC38084DR
UCC38084DR by Texas Instruments is a switching controller with current-mode control technique, BICMOS technology, and pulse width modulation. It operates b/w 0 to 70°C, has a max output current of 1A, and supports a max switching frequency of 1000 kHz. Ideal for applications requiring efficient power regulation in compact spaces.
UCC38084PWR
UCC38084PWR by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates b/w 0-70°C, suitable for commercial applications. The IC features pulse width modulation control in a small outline package ideal for compact designs.
UCC38086D
UCC38086D by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in commercial temperature grade range from 0 to 70°C, making it suitable for various applications requiring precise current-mode control. The device comes in a small outline package with surface-mount capability, ideal for compact designs where space is limited.
NCP1212DR2
NCP1212DR2 by Onsemi is a current-mode switching controller with max output current of 1A and max operating temp of 105 °C. Ideal for applications requiring pulse width modulation control technique, such as small outline switching regulators & controllers. Package style is rectangular, surface mountable with dual terminals.
25 V
105 Cel
-25 Cel
200 kHz
NCP1212P
NCP1212P by Onsemi is a switching controller with current-mode control technique, operating at 200 kHz frequency. It has a max output current of 1A and supports input voltage range from 10V to 25V. Ideal for applications requiring efficient power management in compact spaces.
ST730ACD-TR
ST730ACD-TR by STMicroelectronics is a compact switching regulator with a max output current of 2 A and operates at up to 220 kHz. It features a dual terminal design in a small outline package, suitable for space-constrained applications. Ideal for efficient power management in commercial electronics, it supports input voltages from 4 V to 11 V.
11 V
220 kHz
ST735SCD
ST735SCD by STMicroelectronics is a compact switching regulator with a max output current of 2 A and operates in a temp range of -40 °C to 125 °C. It features a buck-boost configuration and supports input voltages from 4 V to 6.2 V. Ideal for automotive applications, it utilizes pulse width modulation for efficient control.
6.2 V
300 kHz
ST750ACD
ST750ACD by STMicroelectronics is a compact switching regulator with a max output current of 2 A and operates at up to 220 kHz. It features a dual terminal design in a small outline package, suitable for applications requiring efficient power management. With an input voltage range of 4-11 V, it’s ideal for commercial use.
NCP1200AD60R2
NCP1200AD60R2 by Onsemi is a switching controller with current-mode control technique, operating at a max frequency of 68 kHz. With a peak output current of 0.25 A and nominal input voltage of 11 V, it is ideal for small outline applications requiring pulse width modulation in compact spaces.
.25 A
68 kHz
NCP1200AP100
NCP1200AP100 by Onsemi is a switching controller with 114 kHz max frequency and 0.25 A output current. It uses pulse width modulation control technique, ideal for power supply applications requiring efficient current-mode operation in compact designs. The IC's CMOS technology and through-hole terminal form make it suitable for various electronic devices.
114 kHz
NCP1200AP40
NCP1200AP40 by Onsemi is a switching controller with 48 kHz max frequency, 0.25 A output current, and 11 V nominal input voltage. Ideal for applications requiring pulse width modulation control technique in compact designs. Package style: IN-LINE, Technology: CMOS, Control Mode: CURRENT-MODE.
48 kHz
NCP1200AP60
NCP1200AP60 by Onsemi is a switching controller with current-mode control technique, 68 kHz max switching frequency, and 0.25 A max output current. Ideal for applications requiring efficient power management in compact spaces due to its small package size and low nominal input voltage of 11 V.
UCC28084P
UCC28084P by Texas Instruments is a switching regulator/controller with a max output current of 1A and a max switching frequency of 1000kHz. It is commonly used in industrial applications for pulse width modulation control.
9.81 mm
UCC28086P
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
UCC38086P
UCC38086P by Texas Instruments is a switching controller with current-mode control technique, operating at 0-70°C. It features a max output current of 1A, push-pull switcher configuration, and BICMOS technology. Ideal for applications requiring pulse width modulation in commercial temperature grade environments.
© 2023 All rights reserved
