Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TPS650001RTET
Texas Instruments
TPS650001RTET by Texas Instruments is a switching regulator with a nominal voltage of 3.6V and max output current of 0.6A. It is commonly used in industrial applications that require voltage-mode control and pulse width modulation techniques.
ALSO OPERATES AS LDO REGULATOR AT 1.8V, 2.8V; PFM CONTROL TECHNIQUE
SWITCHING REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
6 V
2.3 V
3.6 V
S-PQCC-N16
e4
3 mm
2
1
3
16
85 Cel
-40 Cel
.6 A
1.2 V
PLASTIC/EPOXY
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
260
3.6
Not Qualified
.8 mm
Power Management Circuits
YES
BUCK
2847 kHz
INDUSTRIAL
NICKEL PALLADIUM GOLD
NO LEAD
.5 mm
QUAD
30
TPS650003RTET
TPS650003RTET by Texas Instruments is a switching regulator with 16 terminals, operating at -40 to 85°C. It features a voltage-mode control technique, BUCK switcher config, and max output current of 0.6A. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATES AS LDO REGULATOR AT 3.3V, 1.8V ;PFM CONTROL TECHNIQUE
3.3 V
1.5 V
TPS650006RTER
TPS650006RTER by Texas Instruments is a switching regulator with 16 terminals, operating at -55 to 125 °C. It has a voltage-mode control technique, outputting up to 3.3 V at 0.6 A. Ideal for military-grade applications requiring precise voltage regulation in compact spaces.
ALSO OPERATES AS LDO REGULATOR AT 1.8V, 3.3V ;PFM CONTROL TECHNIQUE
125 Cel
-55 Cel
MILITARY
UC2854BMDWREPG4
The Texas Instruments UC2854BMDWREPG4 is a current-mode switching regulator with 18V nominal voltage, 1.5A max output current, and 120kHz max switching frequency. Ideal for power factor correction applications in military-grade environments due to its MIL temperature grade and boost switcher configuration.
POWER FACTOR CONTROLLER
CURRENT-MODE
20 V
10 V
18 V
R-PDSO-G16
10.3 mm
1.5 A
SOP
SOP16,.4
RECTANGULAR
SMALL OUTLINE
18
2.65 mm
Switching Regulator or Controllers
12 mA
BOOST
120 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
GULL WING
1.27 mm
DUAL
NOT SPECIFIED
7.5 mm
UC2825AQDWREPG4
UC2825AQDWREPG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2.2A and a max switching frequency of 1150kHz. It operates in automotive-grade temperatures, making it suitable for automotive applications requiring precise voltage regulation. The IC features pulse width modulation control technique and push-pull switcher configuration for efficient power management.
ALSO OPERATES IN CURRENT MODE
SWITCHING CONTROLLER
8.8 V
12 V
2.2 A
5.15 V
5.05 V
5.1 V
22 V
9.2 V
PUSH-PULL
1150 kHz
BIPOLAR
AUTOMOTIVE
L5989DTR
STMicroelectronics
L5989DTR by STMicroelectronics is a compact switching regulator designed for automotive applications, featuring a max output current of 5.06 A and a voltage-mode control technique. It operates within -40 °C to 125°C and supports input voltages from 2.9 V to 18 V. Its small outline package ensures efficient space utilization in electronic designs.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 18V
2.9 V
5 mm
5.06 A
HTSSOP
TSSOP16,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.2 mm
1000 kHz
BCDMOS
.65 mm
40
4.4 mm
L5989D
L5989D by STMicroelectronics is a compact switching regulator designed for automotive applications, featuring a max output current of 5.06 A and operates b/w -40 °C to 125°C. It supports input voltages from 2.9 V to 18 V with a max switching frequency of 1 MHz. Its small outline package ensures efficient thermal management in space-constrained designs.
L6566ATR
L6566ATR by STMicroelectronics is a current-mode power factor controller with post regulator. It operates at a max switching frequency of 300 kHz and can handle a max output current of 0.8 A. This small outline IC is ideal for boost switcher configurations in applications requiring efficient power management.
ALSO CONFIGURE IN RESONANT CONTROL
POWER FACTOR CONTROLLER WITH POST REGULATOR
23 V
10.6 V
e3
9.9 mm
.8 A
SOP16,.25
1.75 mm
300 kHz
MATTE TIN
3.9 mm
TPS62112MRSAREP
TPS62112MRSAREP by Texas Instruments is a 16-terminal switching regulator with a max output current of 1.5A and max operating temp of 125°C. Ideal for military applications, it operates in voltage-mode control with a buck switcher config and PWM technique at a max frequency of 1100 kHz.
PFM CONTROL TECHNIQ IS ALSO AVAILABLE
17 V
3.1 V
4 mm
5 V
1 mm
1100 kHz
UC2856NG4
The Texas Instruments UC2856NG4 is a switching controller with 16 terminals, operating at -40 to 85°C. It features a current-mode control technique, PWM technology, and BUCK-BOOST switcher configuration. Ideal for industrial applications requiring a 5.1V output voltage with a max output current of 2A and a supply voltage range of 7.7-40V.
40 V
8 V
15 V
R-PDIP-T16
19.305 mm
2 A
DIP
DIP16,.3
IN-LINE
5.08 mm
23 mA
7.7 V
NO
BUCK-BOOST
230 kHz
THROUGH-HOLE
2.54 mm
7.62 mm
TPS54388QRTERQ1
TPS54388QRTERQ1 by Texas Instruments is a 16-terminal switching regulator with a max output current of 3A and a control mode of current-mode PWM. Operating at -40 to 125°C, it's ideal for automotive applications requiring precise voltage regulation in compact spaces. With a buck switcher configuration and pulse width modulation control technique, this chip carrier package offers efficient power management solutions.
2.95 V
3 A
2.52 V
.8 V
1.8 V
2000 kHz
TPS54429ERSAT
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
7 V
-20 Cel
4.5 A
5.5 V
.76 V
700 kHz
OTHER
TPS57112QRTERQ1
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
4.5 V
TL1451AQDG4
TL1451AQDG4 by Texas Instruments is a 16-terminal switching regulator with voltage-mode control. Operating b/w -40 to 125°C, it offers a max output current of 0.021A and a max switching frequency of 500kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation control technique.
DUAL SWITCHING CONTROLLER
50 V
.021 A
2.5 V
PHASE-SHIFT
500 kHz
TL1451AQDRG4
TL1451AQDRG4 by Texas Instruments is a voltage-mode dual switching controller with a max output current of 0.021 A and a max switching frequency of 500 kHz. Ideal for automotive applications, this small outline package regulator operates b/w -40 to 125°C temperatures, making it suitable for various electronic devices.
UCC28060DG4
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
21 V
14 V
16 V
1.8 A
6.18 V
5.82 V
5 mA
TPS40195RGYTG4
TPS40195RGYTG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max switching frequency of 600kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility in compact designs.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 5V
R-PQCC-N16
20 A
.591 V
5.3 V
600 kHz
3.5 mm
NCV8843PWR2G
Onsemi
NCV8843PWR2G by Onsemi is a 16-terminal switching regulator with a max output current of 3A and a control mode of current/voltage. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications requiring pulse width modulation control at frequencies up to 374kHz.
CURRENT/VOLTAGE-MODE
HSOP
SMALL OUTLINE, HEAT SINK/SLUG
374 kHz
TIN
ADP5022ACBZ-1-R7
Analog Devices
ADP5022ACBZ-1-R7 by Analog Devices is a 16-terminal switching regulator with a max output current of 1.05A and a control mode of current-mode PWM. With a package style of grid array, it is ideal for automotive applications requiring precise voltage regulation in tight spaces.
ALSO OPERATES AT 1.8V AND 3.3V, ALSO OPERATES AS LDO REGULATOR
2.4 V
S-PBGA-B16
2.08 mm
1.05 A
VFBGA
BGA16,4X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.66 mm
3500 kHz
BALL
BOTTOM
TPS54226RGTT
TPS54226RGTT by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It offers a max output current of 2A, max output voltage of 5.5V, and a BUCK switcher configuration. Ideal for industrial applications requiring efficient power management in compact spaces.
TPS65136RTERG4
TPS65136RTERG4 by Texas Instruments is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 85°C. It features a max output current of 1.12A, PWM control technique, and BUCK-BOOST switcher configuration. Ideal for industrial applications requiring a compact chip carrier package with very thin profile and surface mount capability.
ALSO OPERATES IN PFM CONTROL TECHNIQUE
3.7 V
-2.5 V
1.12 A
4.6 V
TPS65708YZHT
TPS65708YZHT by Texas Instruments is a switching controller with 16 terminals in a square grid array package. It operates b/w -40 to 85°C, outputs 1.2-3.3V, and supports PWM control technique at up to 2250kHz frequency. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
S-XBGA-B16
e1
2.036 mm
4
.4 A
UNSPECIFIED
.625 mm
2250 kHz
Tin/Silver/Copper (Sn/Ag/Cu)
TEA1610T/N5,518
NXP Semiconductors
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RESONANT CONTROL
13 V
70 Cel
-25 Cel
LSOP
SMALL OUTLINE, LOW PROFILE
1.65 mm
550 kHz
TEA1610P/N5,112
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
21.6 mm
4.7 mm
TEA1610T/N5,118
AP3440FNTR-G1
Diodes Incorporated
Diodes Inc. AP3440FNTR-G1 is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 85°C. It has a max output current of 4A and operates at a frequency of up to 2MHz. Ideal for industrial applications requiring efficient buck switching regulators in compact square chip carrier packages.
S-XQCC-N16
4 A
UC1846VTD1
The Texas Instruments UC1846VTD1 is a 16-terminal switching controller with current-mode control and pulse width modulation. Operating b/w 7-40 V, it supports a max switching frequency of 500 kHz in buck-boost configuration. Ideal for applications requiring precise voltage regulation in compact spaces.
R-XUUC-N16
2.5146 mm
DIE
UNCASED CHIP
UPPER
2.413 mm
UC1846VTD2
The Texas Instruments UC1846VTD2 is a 16-terminal switching controller with a current-mode control mode and pulse width modulation technique. It operates at a max switching frequency of 500 kHz, supporting input voltages from 7V to 40V for buck-boost configurations. Ideal for applications requiring precise voltage regulation in compact designs.
LV5769V-MPB-E
LV5769V-MPB-E by Onsemi is a current-mode switching controller with BUCK switcher config. It operates b/w -40 to 85 °C, suitable for industrial applications. With a small outline and low profile, it has 16 terminals in a rectangular package shape.
42 V
8.5 V
e6
5.2 mm
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.5 mm
BICMOS
Tin/Bismuth (Sn/Bi)
LV5769VZ-TLM-E
LV5769VZ-TLM-E by Onsemi is a 16-terminal switching controller with BICMOS technology. It operates b/w -40 to 85 °C, suitable for industrial applications. With a buck switcher config, it supports input voltage range of 8.5-42 V, making it ideal for current-mode control in various electronic devices.
TIN BISMUTH
NCV8881PWR2G
NCV8881PWR2G by Onsemi is a switching regulator with 16 terminals, VOLTAGE-MODE control mode, and BUCK switcher config. It operates at a max frequency of 600 kHz and supports a max output current of 3 A. Ideal for applications requiring efficient power conversion in compact spaces.
19 V
9 V
13.2 V
13.2
UCC28221DG4
UCC28221DG4 by Texas Instruments is a current-mode dual switching controller with BICMOS technology. It operates at 2000 kHz max switching frequency, suitable for industrial applications. With a 12V nominal input/output voltage range and compact design (9.9mm x 3.9mm), it's ideal for small outline surface-mount designs.
14.5 V
105 Cel
.01 A
3.45 V
3.15 V
6 mA
8.4 V
L6599AN
L6599AN by STMicroelectronics is a resonant control switching regulator with a nominal voltage of 15 V and a max input voltage of 16 V. It features a compact rectangular package (20x7.62 mm) with 16 terminals for efficient power management. Ideal for applications requiring reliable power supplies, it operates at low current (5 mA).
LG-MAX
8.85 V
20 mm
15
5.1 mm
VIPER28LDTR
VIPER28LDTR by STMicroelectronics is a compact switching regulator with a max output current of 0.85 A and operates at a frequency of 66 kHz. It features a dual terminal design in a small outline package, ideal for space-constrained applications. This device supports input voltages from 8.5 V to 23.5 V, making it versatile for various power management needs.
23.5 V
.85 A
SINGLE
66 kHz
VIPER27HD
VIPER27HD by STMicroelectronics is a switching controller with 16 terminals, operating at a max output current of 0.74 A and a switching frequency of 115 kHz. It utilizes pulse width modulation control technique for applications requiring efficient power management in compact spaces. The device is designed for use in various electronics where small outline packaging and high efficiency are essential.
.74 A
115 kHz
UCC2974PW
UCC2974PW by Texas Instruments is a switching regulator with 12V nominal voltage and 60 kHz max switching frequency. It is used in industrial applications, featuring BICMOS technology, pulse width modulation control technique, and a single switcher configuration. The package style is small outline with thin profile and shrink pitch, making it suitable for compact designs.
FLUORESCENT LIGHT CONTROLLER
25 V
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
12
60 kHz
UCC3974PW
UCC3974PW by Texas Instruments is a switching regulator with 12V nominal voltage, 60 kHz max switching frequency, and BICMOS technology. It is used as a fluorescent light controller in commercial applications due to its compact size, pulse width modulation control technique, and single switcher configuration.
0 Cel
10.5 mA
COMMERCIAL
UC1864J883B
UC1864J883B by Texas Instruments is a MIL-STD-883 Class B switching controller with 16 terminals. Operating b/w -55 to 125 °C, it offers a max output current of 1.5 A at a frequency of 1000 kHz. Ideal for military applications requiring resonant control and push-pull switcher configuration.
R-GDIP-T16
21.34 mm
CERAMIC, GLASS-SEALED
MIL-STD-883 Class B
MAX1864TEEE
Maxim Integrated
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
28 V
e0
4.89 mm
.5 A
SSOP
SMALL OUTLINE, SHRINK PITCH
240
1.73 mm
240 kHz
TIN LEAD
.635 mm
20
UCC2806MTR
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V
4.9 mm
5.17 V
5.02 V
SSOP16,.25
UCC2806M
UCC2806M by Texas Instruments is a switching controller with current-mode control technique. It operates in industrial temperature range (-40 to 85°C) and supports input voltage from 8V to 14.5V, output voltage ranging from 5.02V to 5.17V, and max output current of 0.5A. Ideal for applications requiring pulse width modulation in push-pull switcher configuration.
MAX712CSE-T
MAX712CSE-T by Maxim Integrated is a current-mode switching regulator with 5V nominal voltage and 0.1A max output current. It is a battery charge controller in a small outline package, suitable for commercial applications requiring precise power management in compact spaces.
BATTERY CHARGE CONTROLLER
.1 A
5
10 mA
CMOS
MAX1964TEEE
.05 A
L6910TR
L6910TR by STMicroelectronics is a compact switching regulator designed for efficient voltage control. It features a max output current of 1.3 A, operates at up to 1000 kHz, and supports input voltages from 5 V to 12 V. Ideal for power management in various electronic applications.
1.3 A
L6910
L6910 by STMicroelectronics is a compact switching regulator designed for efficient voltage control. It features a max output current of 1.3 A, operates at up to 1000 kHz, and supports input voltages from 5 V to 12 V. Ideal for power management in various electronic applications.
CS5165AGDW16
CS5165AGDW16 by Onsemi is a 16-terminal switching controller with PWM control mode, operating b/w 0-70 °C. It has a max output current of 15mA and supports push-pull switcher configuration at a frequency of up to 1MHz. Ideal for applications requiring precise voltage/current regulation in compact designs.
.015 A
235
CS5165AGDWR16
CS5165AGDWR16 by Onsemi is a 16-terminal switching controller with PWM control mode. It operates b/w 0-70 °C, has a max output current of 15mA, and supports push-pull switcher config. Ideal for applications requiring high switching frequency up to 1MHz in commercial temperature grade environments.
NCP5162DR2
NCP5162DR2 by Onsemi is a 16-terminal switching controller with max output current of 3A and max switching frequency of 1kHz. It operates b/w -40 to +125 °C, ideal for voltage-mode control applications in commercial-grade electronics requiring compact design and high efficiency.
ALSO REQUIRES A SUPPLY OF 9.5V TO 14V
CONSTANT OFF TIME
© 2023 All rights reserved
