Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
HEF4516BT,653
NXP Semiconductors
BINARY COUNTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
TCO OUTPUT
BIDIRECTIONAL
4000/14000/40000
R-PDSO-G16
e4
9.9 mm
50 pF
YES
BINARY COUNTER
3000000 Hz
SYNCHRONOUS
2
4
1
16
85 Cel
-40 Cel
PLASTIC/EPOXY
SOP
SOP16,.25
RECTANGULAR
SMALL OUTLINE
TR
260
5/15
290 ns
Not Qualified
1.75 mm
Counters
15 V
3 V
5
CMOS
INDUSTRIAL
Nickel/Palladium/Gold (Ni/Pd/Au)
GULL WING
1.27 mm
DUAL
30
POSITIVE EDGE
3.9 mm
18 MHz
HEF4526BT,652
TCO OUTPUT; GATED CLOCK
DOWN
6000000 Hz
BULK
300 ns
32 MHz
HEF4526BT,653
N74F161AD,602
BINARY COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
UP
F/FAST
90000000 Hz
20 Amp
70 Cel
0 Cel
65 mA
11 ns
5.5 V
4.5 V
TTL
COMMERCIAL
NICKEL PALLADIUM GOLD
90 MHz
N74F161AD,623
N74F191D,602
55 mA
12 ns
N74F191D,623
NOT SPECIFIED
N74F193D,602
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
50 mA
13 ns
N74F193D,623
N74F269D,602
BINARY COUNTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
R-PDSO-G24
15.4 mm
85000000 Hz
8
24
SOP24,.4
125 mA
10.5 ns
2.65 mm
7.5 mm
85 MHz
N74F269D,623
N74F393D,623
NXP Semiconductors' N74F393D,623 is a TTL digital counter with 4-bit capacity and 2 functions. Operating at 5V, it has a propagation delay of 17.5 ns and can handle load capacitance up to 50 pF. Ideal for applications requiring asynchronous operation and negative edge triggering in commercial temperature grades.
R-PDSO-G14
8.65 mm
ASYNCHRONOUS
14
58 mA
17.5 ns
NEGATIVE EDGE
100 MHz
HEC4040BT,118
BINARY COUNTER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Minimum fmax: 25 MHz;
12
210 ns
25 MHz
HC40103QM96G4Q1
Texas Instruments
HC40103QM96G4Q1 by Texas Instruments is an 8-bit digital counter with a max frequency of 10MHz. Operating in automotive temperature grade, it has a propagation delay of 450ns and operates synchronously. Ideal for applications requiring down count direction and positive edge trigger type.
HC/UH
10000000 Hz
4 Amp
125 Cel
2/6
450 ns
AEC-Q100
6 V
2 V
4.5
AUTOMOTIVE
12 MHz
CD40102BNSR
CD40102BNSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 260ns. It operates at a nominal voltage of 5V and has a max frequency of 700kHz. Ideal for military applications due to its temperature grade and synchronous operation mode.
10.3 mm
DECADE COUNTER
700000 Hz
1.5 Amp
-55 Cel
SOP16,.3
.03 mA
600 ns
2 mm
18 V
MILITARY
5.3 mm
2.4 MHz
CD4033BNSR
CD4033BNSR by Texas Instruments is a 5-bit digital counter with positive edge trigger, operating at 8 MHz max frequency. It has load/preset inputs and synchronous operation mode, suitable for military-grade applications. With a propagation delay of 700 ns and operating temperature range from -55 to 125°C, it's ideal for compact designs requiring precise counting capabilities.
5-STAGE JOHNSON DECADE COUNTER; WITH RIPPLE BLANKING
10.2 mm
DISPLAY DRIVER COUNTER
700 ns
8 MHz
SN74ALS161BNSR
SN74ALS161BNSR by Texas Instruments is a 4-bit synchronous digital counter with a propagation delay of 20 ns and a max frequency of 40 MHz. It is commonly used in applications requiring count direction control, such as frequency dividers and event counters.
ALS
40000000 Hz
8 Amp
21 mA
20 ns
40 MHz
SN74LS590NSR
SN74LS590NSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 45ns and operates at a supply voltage of 5V. It features a 3-STATE output, positive edge trigger, and supports a max frequency of 20MHz. Ideal for applications requiring asynchronous operation and counting up functions in commercial temperature environments.
TCO OUTPUT; REGISTERED OUTPUTS
LS
45 pF
20000000 Hz
24 Amp
3-STATE
33 ns
5.25 V
4.75 V
20 MHz
SN74LS592NSR
SN74LS592NSR by Texas Instruments is an 8-bit digital counter with a propagation delay of 53ns and operates at a supply voltage of 5V. It features a 3-STATE output, positive edge trigger, and can handle a max frequency of 20MHz. Ideal for applications requiring asynchronous operation and up counting functionality in commercial temperature environments.
REGISTERED INPUTS
60 mA
30 ns
HCF4541M013TR
STMicroelectronics
HCF4541M013TR by STMicroelectronics is a 16-bit synchronous digital counter with a max supply voltage of 20V and operates at temperatures from -55 °C to 125°C. It features positive edge triggering and load input capabilities. Ideal for military applications, it comes in a compact SO package.
18000 ns
20 V
CD4536BDW
CD4536BDW by Texas Instruments is a 24-bit digital counter with a propagation delay of 3000 ns and operates at a max frequency of 2.5 MHz. It is designed for military-grade applications, featuring synchronous operation mode and positive edge trigger type. This CMOS technology device has a package style of small outline and can handle supply voltages ranging from 3V to 18V.
2500000 Hz
TUBE
.1 mA
8000 ns
NO
2.5 MHz
CD4522BM96
CD4522BM96 by Texas Instruments is a 4-bit digital counter with synchronous operation. It has a propagation delay of 1100 ns and can operate at frequencies up to 1.5 MHz. Ideal for military applications, this CMOS technology-based counter supports load or preset inputs and operates within a temperature range of -55 to 125°C.
DUMMY VAL
1500000 Hz
1100 ns
4 MHz
CD4059AM96
CD4059AM96 by Texas Instruments is a CMOS digital counter with 24 terminals, operating at 5V supply voltage. It features a propagation delay of 360ns and can handle frequencies up to 1.5MHz. Ideal for military applications due to its wide temperature range (-55°C to 125°C) and bidirectional count direction capability.
DIVIDE BY N COUNTER
360 ns
Prescaler/Multivibrators
12 V
6 MHz
SN74HC191DT
SN74HC191DT by Texas Instruments is a 4-bit digital counter with a propagation delay of 41 ns and operates at a nominal voltage of 5V. It features positive edge trigger type, bidirectional count direction, and can handle max frequency of 17 MHz. Ideal for industrial applications requiring synchronous operation in compact spaces.
RCO OUTPUT
17000000 Hz
5.2 Amp
.08 mA
240 ns
19 MHz
CD74HC191MT
CD74HC191MT by Texas Instruments is a 4-bit digital counter with a propagation delay of 37ns. It operates at a nominal voltage of 4.5V and has a max frequency of 20MHz. Ideal for military-grade applications requiring bidirectional counting in compact designs.
HC
255 ns
23 MHz
CD74HC4020MT
CD74HC4020MT by Texas Instruments is a 14-bit digital counter with a propagation delay of 210 ns. Operating b/w -55 to 125 °C, it has a max frequency of 20 MHz and operates on a supply voltage range of 2-6 V. Ideal for military-grade applications requiring asynchronous operation and negative edge triggering in compact designs.
OUTPUT FROM 12 STAGES AVAILABLE
24 MHz
CD74HCT163MT
CD74HCT163MT by Texas Instruments is a 4-bit digital counter with synchronous operation, positive edge trigger, and max frequency of 20MHz. It operates at a supply voltage range of 4.5V to 5.5V, has a propagation delay of 59ns, and is suitable for military-grade applications requiring precise counting functions in compact electronic systems.
HCT
59 ns
MC14536BFEL
Onsemi
MC14536BFEL by Onsemi is a 4-bit digital counter with synchronous operation mode. It has a propagation delay of 14000 ns and operates b/w -55 to 125 °C. This small outline package is ideal for military applications requiring up to 2 MHz frequency and positive edge trigger type.
14000 ns
2.05 mm
5.275 mm
2 MHz
CD74HC390MT
CD74HC390MT by Texas Instruments is a digital counter with 4-bit resolution and 2 functions. Operating at a max frequency of 24 MHz, it supports an asynchronous operation mode and has a propagation delay of 550 ns. Ideal for military-grade applications requiring up-counting functionality in small outline packages.
DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS
550 ns
CD74HCT390MT
CD74HCT390MT by Texas Instruments is a digital counter with 4 bits, 2 functions, and operates at a max frequency of 18 MHz. It has a propagation delay of 69 ns and is suitable for military-grade applications due to its temperature range of -55°C to 125°C. This surface-mount device features negative edge triggering and requires a nominal voltage of 5V.
18000000 Hz
126 ns
CD4060BMT
CD4060BMT by Texas Instruments is a 14-bit digital counter with a propagation delay of 300 ns and max frequency of 3.5 MHz. It operates on a supply voltage range of 3-18V, making it suitable for military-grade applications requiring asynchronous operation and negative edge triggering in compact designs.
OUTPUTS FROM 10 STAGES AVAILABLE; BUILT-IN OSCILLATOR
3500000 Hz
740 ns
CD74HC4520MT
CD74HC4520MT by Texas Instruments is a digital counter with 4 bits and 2 functions. It has a propagation delay of 51 ns, operates at a supply voltage range of 2-6V, and can handle a max frequency of 20 MHz. Ideal for military-grade applications requiring synchronous counting in compact designs.
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
CD74HC40103MT
CD74HC40103MT by Texas Instruments is an 8-bit digital counter with a propagation delay of 64 ns. It operates at a supply voltage range of 2-6V and has a max frequency of 10MHz. Ideal for military-grade applications, it features synchronous operation and down count direction.
TCO OUTPUT; RESET TO MAX COUNT
CD74HC4040MT
CD74HC4040MT by Texas Instruments is a 12-bit digital counter with a max frequency of 20MHz. It operates on a supply voltage range of 2-6V and has a propagation delay of 210ns. Ideal for military-grade applications, it features negative edge triggering and asynchronous operation.
CD74HCT4060MT
BINARY COUNTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
100 ns
CD74HC40103QM96Q1
CD74HC40103QM96Q1 by Texas Instruments is an 8-bit digital counter with a max frequency of 10MHz. Operating in the temperature range of -40 to 125°C, it features a propagation delay of 450ns and operates on a supply voltage range of 2-6V. Ideal for automotive applications due to AEC-Q100 screening level.
MC14569BDWG
MC14569BDWG by Onsemi is a 4-bit digital counter with 2 functions. It operates at a supply voltage of 5V and has a propagation delay of 1200ns. Ideal for military applications, it features positive edge trigger type and synchronous operation mode.
e3
2100000 Hz
3
SOP16,.4
1200 ns
MATTE TIN
7.8 MHz
MC14520BDWG
MC14520BDWG by Onsemi is a digital counter with 2 functions, 4-bit resolution, and operates at a supply voltage of 5V. It has a propagation delay of 560ns and can handle a max frequency of 1.5MHz. Ideal for military-grade applications requiring synchronous operation and positive edge triggering in compact designs.
.64 Amp
560 ns
MC14526BDWG
MC14526BDWG by Onsemi is a 4-bit digital counter with Vsup of 5V, tpd of 1100ns, and fmax of 4MHz. It is used in military-grade applications requiring synchronous operation and down count direction. The package is small outline with dual terminal position and matte tin finish for surface mount assembly.
MC14018BDG
MC14018BDG by Onsemi is a 5-bit digital counter with 620 ns propagation delay. It operates at a supply voltage range of 3-18V and can handle load capacitance of 50 pF. Ideal for military-grade applications requiring synchronous operation and positive edge trigger type.
RING COUNTER
1250000 Hz
RAIL
620 ns
MC74HC390AFG
MC74HC390AFG by Onsemi is a digital counter with 3-bit resolution and 2 functions. Operating at 3V, it has a max frequency of 25MHz and propagation delay of 300ns. Ideal for military-grade applications requiring asynchronous operation in small outline packages.
ONE FUNCTION HAS 1 BIT
25000000 Hz
MC74HC393AFELG
MC74HC393AFELG by Onsemi is a 4-bit digital counter with 2 functions, operating at 3V. It has a propagation delay of 300ns and can handle up to 50pF load capacitance. Ideal for military-grade applications requiring asynchronous operation with a max frequency of 25MHz.
SOP14,.3
MC74HC4020AFELG
MC74HC4020AFELG by Onsemi is a 14-bit digital counter with 115 ns propagation delay and 50 pF load capacitance. It operates on a supply voltage range of 2-6V, suitable for military-grade applications requiring up to 25 MHz frequency at nominal supply. The device features negative edge trigger type and is designed for asynchronous operation in small outline packages.
115 ns
MC74HC4040AFG
MC74HC4040AFG by Onsemi is a 12-bit digital counter with 115 ns propagation delay. Operating at 3V, it has a max frequency of 25 MHz and triggers on negative edge. Ideal for military-grade applications due to its small outline package and asynchronous operation mode.
MC14017BFELG
MC14017BFELG by Onsemi is a 10-bit digital counter with 1000 ns propagation delay and max frequency of 2MHz. It operates on a supply voltage range of 3-18V, suitable for military-grade applications requiring synchronous operation and positive edge trigger type. The small outline package with dual terminals makes it ideal for space-constrained designs.
2000000 Hz
10
1000 ns
6.7 MHz
MC14060BFELG
MC14060BFELG by Onsemi is a 14-bit digital counter with 740 ns propagation delay. Operating at temperatures from -55 to 125 °C, it has a max frequency of 3.5 MHz and operates on a supply voltage range of 3-18 V. Ideal for military applications requiring asynchronous operation and negative edge triggering in compact designs.
MC14516BDG
MC14516BDG by Onsemi is a 4-bit digital counter with 630 ns propagation delay and 1.75 mm seated height. It operates at a max frequency of 1.5 MHz, suitable for military-grade applications requiring bidirectional count direction and synchronous operation. The package is small outline with gull wing terminals, making it ideal for space-constrained designs.
630 ns
MC14516BFG
MC14516BFG by Onsemi is a 4-bit digital counter with load/preset input, operating at 5V. It features a propagation delay of 630ns and can handle load capacitance of 50pF. Ideal for military applications due to its synchronous operation mode and bidirectional count direction.
© 2023 All rights reserved
