Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
PCF8576CT/1,518
NXP Semiconductors
PCF8576CT/1,518 by NXP Semiconductors is a graphics display driver with 40 segments and CMOS technology. It operates at a voltage range of 1.8V to 5.5V, suitable for industrial applications with an operating temperature from -40°C to 85°C. This IC features a serial data input mode and is designed for liquid crystal displays in compact small outline packaging.
SERIAL
SEGMENT
LIQUID CRYSTAL DISPLAY DRIVER
R-PDSO-G56
21.5 mm
3
NO
1
40
56
85 Cel
-40 Cel
PLASTIC/EPOXY
SSOP
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
245
3.3 mm
5.5 V
1.8 V
5 V
6.5 V
2.5 V
YES
CMOS
INDUSTRIAL
GULL WING
.75 mm
DUAL
11.05 mm
.315 MHz
ZXLD1366QEN8TC
Diodes Incorporated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LED DISPLAY DRIVER
R-PDSO-G8
e3
4.9 mm
2
8
125 Cel
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
260
AEC-Q100
1.63 mm
60 V
6 V
24 V
AUTOMOTIVE
MATTE TIN
1.27 mm
30
3.9 mm
.625 MHz
PCA8576CH/Q900,157
PCA8576CH/Q900,157 by NXP is a low-profile LCD driver supporting up to 20 digits with a max supply voltage of 6V. It operates in temperatures from -40 °C to 85 °C and features serial data input for efficient display control. Ideal for graphics applications, it ensures reliable performance in automotive environments.
It displays 20-Digit in 7-segment display and 10-Digit in 14-segment display
DOT MATRIX; SEGMENT
STANDARD
S-PQFP-G64
10 mm
20-DIGIT
64
LFQFP
QFP64,.40SQ,20
SQUARE
FLATPACK, LOW PROFILE, FINE PITCH
1.6 mm
.12 mA
2 V
3.5 V
4 V
.5 mm
QUAD
PCA8576CH/Q900/1,1
The PCA8576CH/Q900/1 by NXP is a low-profile LCD driver supporting 20 digits with a max supply voltage of 6V and operates b/w -40 °C to 85 °C. It features serial data input and multiplexed display capability, ideal for compact graphics applications. Its AEC-Q100 screening ensures reliability in automotive environments.
PCA8576CT/Q900/1Y
PCA8576CT/Q900/1Y by NXP is a versatile graphics display driver ideal for dot matrix and segment displays. It operates within 2-6V, supports up to 20 digits with a max temp of 85 °C, and features a compact SOIC package. Perfect for automotive and industrial applications.
SSOP56,.6,30
LM3447MT/NOPB
Texas Instruments
LM3447MT/NOPB by Texas Instruments is a LED display driver with 14 terminals, operating voltage range of 7.5V to 17.5V, and temperature grade suitable for automotive applications. Its small outline package with thin profile makes it ideal for graphics display drivers in compact spaces. With a peak reflow temperature of 260°C, it ensures reliable performance in harsh environments.
R-PDSO-G14
5 mm
14
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
17.5 V
7.5 V
14 V
.65 mm
4.4 mm
LM3447MTE/NOPB
LM3447MTE/NOPB by Texas Instruments is a LED display driver with 14 terminals, operating temperature range of -40 to 125°C, and supply voltage ranging from 7.5V to 17.5V. It is designed for automotive applications requiring a compact package style and standard input characteristics.
BD8379FV-ME2
ROHM
ROHM's BD8379FV-ME2 LED display driver operates at 3-5.5V, with 12 segments and a max fmax of 1.25MHz. Ideal for industrial applications, it features a small outline package with 20 terminals in gull wing form, suitable for graphics displays requiring serial data input.
R-PDSO-G20
6.5 mm
12
20
105 Cel
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
NOT SPECIFIED
1.25 mm
3 V
3.3 V
1.25 MHz
BD9422EFV-E2
ROHM's BD9422EFV-E2 is a graphics display driver with 40 terminals, operating from -40 to 85°C. It supports LED displays with 8 segments and Schmitt trigger input characteristics. The driver has a max supply voltage of 35V and min of 9V, making it suitable for industrial applications requiring high reliability.
SCHMITT TRIGGER
R-PDSO-G40
13.6 mm
OPEN-DRAIN
HTSSOP
TSSOP40,.30
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1 mm
16 mA
35 V
9 V
5.4 mm
SN751506FT
SN751506FT by Texas Instruments is a DC plasma display driver with 32 segments, operating at a max frequency of 0.2 MHz. It features a serial data input mode and supports dot matrix display mode. This small outline package with gull wing terminals is ideal for graphics display applications requiring a supply voltage b/w 4V to 6V.
DOT MATRIX
DC PLASMA DISPLAY DRIVER
R-PDSO-G48
20 mm
32
48
70 Cel
0 Cel
SOP48,.75,30
5
Not Qualified
2.3 mm
Display Drivers
40 mA
COMMERCIAL
.8 mm
14 mm
.2 MHz
MAX1664CUP
Maxim Integrated
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
e0
2.8 V
TIN LEAD
.072 MHz
L6574D
STMicroelectronics
L6574D by STMicroelectronics is a graphics display driver with a max supply voltage of 16.6V and a min operating temperature of -40°C. It is commonly used as an interface IC for vacuum fluorescent displays in automotive applications.
PARALLEL
VACUUM FLUORESCENT DISPLAY DRIVER
R-PDSO-G16
e4
9.9 mm
16
SOP
SMALL OUTLINE
1.75 mm
16.6 V
10 V
12 V
NICKEL PALLADIUM GOLD
.114 MHz
ICM7218AIQI
ICM7218AIQI by Maxim Integrated is a graphics display driver with 8-digit segments. It operates at 5V, supports parallel data input mode, and has a totem-pole output. Ideal for LED displays, this CMOS technology IC offers multiplexed display capability in a square flatpack package.
COMMON-ANODE
S-PQFP-G28
8-DIGIT
28
-20 Cel
TOTEM-POLE
TRUE
QFP
LDCC28,.5SQ
FLATPACK
OTHER
ICM7218BIQI
Maxim Integrated's ICM7218BIQI is a graphics display driver with 8-digit segments, true output polarity, and multiplexed display capability. It operates on a 5V supply voltage and supports parallel data input mode for LED displays. Ideal for applications requiring precise segment control in temperature range of -20 to 85°C.
COMMON-CATHODE
ICM7218DIQI
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: QFP; Package Shape: SQUARE;
MAX7219CWG
MAX7219CWG by Maxim Integrated is a Graphics Display Driver with 8-DIGIT display capability. It operates on 4-5.5 V supply voltage range, featuring SERIAL data input mode and TOTEM-POLE output characteristics. Ideal for LED displays, it has a small outline package shape and GULL WING terminal form.
R-PDSO-G24
15.4 mm
7
24
SOP24,.4
2.65 mm
MOS
Tin/Lead (Sn85Pb15)
7.5 mm
1.3 MHz
BU9728AKV-E2
ROHM's BU9728AKV-E2 is a 48-terminal graphics display driver with dot matrix mode and serial data input. It operates at supply voltages of 2.5-5.5 V, suitable for industrial applications like liquid crystal displays due to its low profile flatpack package style and totem-pole output characteristics.
S-PQFP-G48
e2
7 mm
4-BP
36
QFP48,.35SQ,20
3/5
Other Interface ICs
.25 mA
TIN COPPER
.036 MHz
TFP410MPAPREPG4
TFP410MPAPREPG4 by Texas Instruments is a Graphics Display Driver with 64 terminals, operating at -55 to 125 °C. It has a supply voltage range of 3-3.6 V and supports a max fmax of 165 MHz. Ideal for applications requiring high-speed data input and interface ICs for LCD drivers in military-grade environments.
-55 Cel
HTFQFP
TQFP64,.47SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
3.3
1.2 mm
Line Driver or Receivers
250 mA
3.6 V
MILITARY
165 MHz
TPS92210D
TPS92210D by Texas Instruments is a LED display driver with 8 terminals, operating voltage range of 9-20V, and temperature grade suitable for automotive applications. It features a small outline package style, Gull Wing terminal form, and standard input characteristics. Ideal for graphics display drivers in automotive LED applications.
SOP8,.25
9/20
20 V
.133 MHz
A6275ELW
Allegro MicroSystems
Allegro MicroSystems A6275ELW is a Graphics Display Driver with 8 segments, BICMOS technology, and 10 MHz min fmax. Ideal for LED display driver applications, it operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 4.5-5.5 V.
10.3 mm
SOP16,.4
4.5 V
BICMOS
10 MHz
A6276ELW
Allegro MicroSystems' A6276ELW is a Graphics Display Driver with 16 segments, BICMOS technology, and LED display driver interface. It operates in industrial temperature range (-40 to 85 °C) with supply voltage of 4.5-5.5 V. Ideal for applications requiring segment display mode and serial data input in small outline package style.
UCC28810DG4
UCC28810DG4 by Texas Instruments is a LED display driver with a max supply voltage of 18V and operating temperature range from -40 to 105°C. It has a small outline package style, suitable for industrial applications requiring low power consumption at 6mA supply current. The terminal finish is nickel palladium gold, making it ideal for surface mount designs in graphics displays.
6 mA
18 V
UCC28810DRG4
UCC28810DRG4 by Texas Instruments is a graphics display driver with max supply voltage of 18V, operating temp range -40 to 105°C, and max supply current of 6mA. It is used in LED display driver applications due to its small outline package style and industrial temperature grade suitability.
PCA9955ATW/Q900J
NXP Semiconductors' PCA9955ATW/Q900J is a serial input LED display driver with 16 segments. It operates b/w -40 to 85 °C and supports multiplexed displays. The small outline package has 28 terminals, Gull Wing form, and is suitable for industrial applications.
R-PDSO-G28
9.7 mm
.1 MHz
LED6001
LED6001 by STMicroelectronics is a graphics display driver with 16 terminals, operating voltage range of 5.5V to 36V, and max supply current of 7mA. It is designed for LED display applications requiring a compact package style with small outline and thin profile, suitable for various temperature environments from -40 °C to 125°C.
4
TSSOP16,.25
7 mA
36 V
.02 MHz
NCL30060BDR2G
Onsemi
NCL30060BDR2G by Onsemi is a LED display driver with 7 terminals, operating voltage range of 11.75V to 28V, and low supply current of 1.7mA. Ideal for industrial applications requiring graphics display drivers in compact form factor with surface mount capability.
R-PDSO-G7
SOP7/8,.25
1.7 mA
28 V
11.75 V
PCA8547BHT/AY
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE; Width: 10 mm;
It displays 22-Digit in 7-segment display and 11-Digit in 14-segment display
22-DIGIT
44
95 Cel
TFQFP
FLATPACK, THIN PROFILE, FINE PITCH
.2 mA
6.99 V
TIN
5 MHz
PCA9956ATWY
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 38; Package Code: HTSSOP; Package Shape: RECTANGULAR;
R-PDSO-G38
38
PCU9956ATWY
BU9716BKV
ROHM's BU9716BKV is a Graphics Display Driver with DOT MATRIX display mode and SERIAL data input. It operates at 5V, has 48 terminals, and supports LIQUID CRYSTAL DISPLAY DRIVER interface IC type. Ideal for industrial applications requiring low profile, fine pitch package style.
3-BP
.3 mA
TLC5904PZP
TLC5904PZP by Texas Instruments is a LED display driver with 16 segments, operating at 5V. It features constant-current output, parallel data input mode, and a max supply voltage of 5.5V. Ideal for graphics displays, it has a compact square package with quad terminals and Gull Wing form factor.
ANALOG SUPPLY VOLTAGE OF 4.5, 5, 5.5 -MIN, NOM,MAX RESPECTIVELY ARE AVAILABLE
S-PQFP-G100
100
CONSTANT-CURRENT
TQFP100,.63SQ
30 mA
15 MHz
TLC5902PZP
TLC5902PZP by Texas Instruments is a LED display driver with 16 segments, operating voltage range of 4.5V to 5.5V, and data input mode in parallel. Ideal for graphics displays, it features a flatpack package style with Gull Wing terminals and CMOS technology for applications requiring high performance at temperatures ranging from -20°C to 85°C.
AP1690MTR-G1
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
21 V
15 V
LP8860BQVFPRQ1
LP8860BQVFPRQ1 by Texas Instruments is a graphics display driver with 4 channels and 8 segments. It operates b/w -40 to 125 °C, ideal for automotive applications. With a serial data input mode and terminal pitch of 0.8 mm, it's suitable for LED display driver interface ICs.
S-PQFP-G32
HLQFP
FLATPACK, HEAT SINK/SLUG, LOW PROFILE
.4 MHz
MAX1698EUB
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
S-PDSO-G10
3 mm
10
TSSOP10,.19,20
2.7 V
AL8807BMP-13
Diodes Inc.'s AL8807BMP-13 is a LED display driver with 36V max supply voltage, 6V min supply voltage, and constant-current output. It operates b/w -40°C to 125°C, suitable for graphics displays in various applications due to its small outline package and dual terminal position.
S-PDSO-G8
TSSOP8,.19
5 mA
MP4030AGS-Z
Monolithic Power Systems
MP4030AGS-Z by Monolithic Power Systems is a graphics display driver with 8 terminals, operating temperature range of -40 to 125 °C. It has a supply voltage range of 11-27 V and max current of 17.5 mA. Ideal for automotive LED display applications due to its small outline package and matte tin terminal finish.
17.5 mA
27 V
11 V
MP4030AGS
MP4030AGS by Monolithic Power Systems is a LED display driver with 3 segments, operating at -40 to 125 °C. It has a supply voltage range of 11-27 V and max current of 17.5 mA. Ideal for automotive applications due to its small outline package and matte tin terminal finish.
AP1694AMTR-G1
25 V
7 V
MP3398AGS-Z
MP3398AGS-Z by Monolithic Power Systems is a LED display driver with 16 terminals, operating voltage range of 5-28V, and low supply current of 5.5mA. Ideal for graphics displays, it has a small outline package and operates in temperatures from -40 to 125°C.
5.5 mA
MP3398AGS
MP3398AGS by Monolithic Power Systems is a LED display driver with 16 terminals, operating voltage range of 5-28V, and low supply current of 5.5mA. Ideal for graphics displays, it offers true output polarity and supports up to 4 segments for various applications.
MP3398AGY-Z
MP3398AGY-Z by Monolithic Power Systems is a LED display driver with 20 terminals, operating voltage range of 5-28V, and temperature range of -40 to 125°C. Ideal for graphics displays, it features a small outline package style and gull wing terminal form for compact designs.
12.8 mm
MP4026GJ-Z
MP4026GJ-Z by Monolithic Power Systems is a LED display driver with 6 terminals, operating voltage range of 12-28V. It has totem-pole output and can withstand temperatures from -40 to 125°C. Ideal for automotive applications due to its small size and low supply current requirements.
R-PDSO-G6
2.9 mm
6
VSSOP
TSOP6,.11,37
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
3 mA
.95 mm
AL9910A-5S-13
500 V
A6812SLWTR
Allegro MicroSystems' A6812SLWTR is a graphics display driver with 28 terminals, operating at -20 to 85°C. It supports dot matrix display mode and serial data input, with a supply voltage of 3.3V/5V. Ideal for vacuum fluorescent displays, it has a small outline package style and Gull Wing terminal form.
CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
17.9 mm
OPEN-EMITTER
SOP28,.4
240
3.3/5
BIPOLAR
Tin/Lead (Sn/Pb)
TLC5943PWP
TLC5943PWP by Texas Instruments is a graphics display driver with 16 segments, operating at 30 MHz. It features constant-current output and serial data input mode, suitable for LED displays. The IC has a small outline package style, dual terminal position, and operates in industrial temperature range (-40 to 85 °C).
TSSOP28,.25
50 mA
30 MHz
AL8805W5-7
AL8805W5-7 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. It has a small outline package style, suitable for automotive applications due to its wide temperature range of -40 to 125°C. The terminal finish is matte tin with dual position gull wing terminals.
R-PDSO-G5
TSOP5/6,.11,37
1.4 mm
30 V
MC10SX1130DR2G
MC10SX1130DR2G by Onsemi is a 16-terminal LED display driver with serial data input mode. Operating at -40 to 85 °C, it has a supply voltage of 5V and negative supply voltage of -5.2V. Ideal for industrial applications requiring small outline surface-mount packages.
-5.2 V
SOP16,.25
5/-5.2
© 2023 All rights reserved
