Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LQH44PN1R0NP0L
Murata Manufacturing
Murata Manufacturing's LQH44PN1R0NP0L is a shielded, surface mount fixed inductor with 1uH nominal inductance and 2.45A max rated current. Ideal for power applications, it features a ferrite core, 90MHz self-resonance frequency, and operates b/w -40°C to 125°C.
General Purpose Inductor
Power Inductor
1 μH
2.45 A
36 mΩ
30 %
1
90 MHz
1 MHz
DC Resistance is measured at 20% Tolerance
Rectangular Package
1515
Yes
Magnetic Shielding
Ferrite
-40 °C (-40 °F)
125 °C (257 °F)
Dual Ended
Wraparound
2
SMT
0.157 in (4 mm)
0.065 in (1.65 mm)
Tape and Reel, Embossed, 7 in
LQH44PN220MP0L
Murata Manufacturing's LQH44PN220MP0L is a shielded, surface mount inductor with 22uH nominal inductance. It has a max rated current of 0.79A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
22 μH
790 mA
444 mΩ
20 %
17 MHz
LQH44PN2R2MP0L
Murata Manufacturing's LQH44PN2R2MP0L is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.8A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 70MHz and operates b/w -40 to 125°C.
RF Inductor
2.2 μH
1.8 A
58.8 mΩ
70 MHz
LQH44PN3R3MP0L
Murata Manufacturing's LQH44PN3R3MP0L is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 1.77A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 50MHz and operates b/w -40°C to 125°C.
3.3 μH
1.77 A
78 mΩ
50 MHz
LQH44PN4R7MP0L
Murata Manufacturing's LQH44PN4R7MP0L is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 40MHz and operates b/w -40 to 125°C.
4.7 μH
1.7 A
96 mΩ
40 MHz
LQH6PPN1R0N43L
Murata Manufacturing's LQH6PPN1R0N43L is a shielded, surface mount fixed inductor with 1uH nominal inductance and 4.3A max rated current. Ideal for power applications, it features a self-resonance frequency of 110MHz and operates b/w -40°C to 85°C.
4.3 A
9 mΩ
110 MHz
100 kHz
DC Resistance is measured at 30% Tolerance
LQH6PP
2424
85 °C (185 °F)
0.236 in (6 mm)
0.169 in (4.3 mm)
Tape and Reel, Plastic, 7 in
LQP03TN3N4C02D
Murata Manufacturing's LQP03TN3N4C02D is a chip inductor with 0.0034 uH nominal inductance, 7000 MHz self-resonance frequency, and 125 °C max operating temperature. Ideal for RF applications due to its small size and high quality factor.
3.4 nH
450 mA
14
250 mΩ
5.88 %
7000 MHz
500 MHz
Inductance Tolerance is 0.2 nH
0201
No
Chip
-55 °C (-67 °F)
Tin
0.024 in (0.6 mm)
0.012 in (0.3 mm)
Tape and Reel, Paper, 7 in
e3
PM105-271K-RC
Bourns
Bourns PM105-271K-RC is a surface mount fixed inductor with 270uH nominal inductance, 0.97 ohm DC resistance, and 10% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.57A. Its ferrite core and self-resonance frequency of 3.5MHz make it suitable for general purpose use.
270 μH
570 mA
970 mΩ
10 %
3.5 MHz
1 kHz
3939
Rectangular
One Surface
Tin Over Nickel
0.386 in (9.8 mm)
0.228 in (5.8 mm)
Tape and Reel, Embossed Plastic/Paper, 13 in
PM105-471K-RC
Bourns PM105-471K-RC is a surface mount fixed inductor with 470uH nominal inductance, 1.48 ohm DC resistance, and 10% tolerance. Ideal for power applications, it operates b/w -40 to 125 °C with a max rated current of 0.42A.
470 μH
420 mA
1.48 Ω
2.5 MHz
PM105-680K-RC
Bourns PM105-680K-RC is a surface mount fixed inductor with 68uH nominal inductance, 1.1A max current, and 10% tolerance. Ideal for power applications, it operates b/w -40°C to 125°C with a self-resonance frequency of 7MHz.
68 μH
1.1 A
220 mΩ
7 MHz
PM105-820K-RC
Bourns PM105-820K-RC is a 82uH SMT inductor with 10% tolerance, suitable for power applications. It has a max operating temp of 125°C, rated current of 1A, and DC resistance of 0.25 ohm. Ideal for general purpose use due to its ferrite core material and self-resonance frequency of 6MHz.
82 μH
1 A
6 MHz
PM105SB-180M-RC
Bourns PM105SB-180M-RC is a shielded, surface mount inductor with 18uH nominal inductance. It operates b/w -40 to 125°C, handling up to 1.6A current. Ideal for power applications due to its ferrite core and general purpose design.
18 μH
1.6 A
80 mΩ
21 MHz
0.39 in (9.9 mm)
0.177 in (4.5 mm)
Tape and Reel, Embossed, 13 in
PM105SB-560L-RC
Bourns PM105SB-560L-RC is a shielded, surface mount fixed inductor with 56uH nominal inductance. It operates b/w -40 to 125°C, with a max rated current of 0.93A. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 11MHz and features dual-ended terminals.
56 μH
930 mA
190 mΩ
15 %
11 MHz
PM105SB-820L-RC
Bourns PM105SB-820L-RC is a shielded SMT inductor with 82uH nominal inductance, 0.28 ohm DC resistance, and 9MHz self-resonance frequency. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.79A.
280 mΩ
9 MHz
PM1210-2R7J-RC
Bourns PM1210-2R7J-RC is a 2.7uH SMT inductor with dual-ended terminals, ideal for RF applications. Featuring a max operating temp of 125°C, it has a DC resistance of 1.1 ohm and self-resonance frequency of 70 MHz. This general-purpose inductor comes in a compact rectangular package measuring 2.9mm x 2.5mm x 2.2mm.
2.7 μH
290 mA
30
1.1 Ω
5 %
1210
J Bend
0.114 in (2.9 mm)
0.087 in (2.2 mm)
0.098 in (2.5 mm)
PM1210-820J-RC
Bourns PM1210-820J-RC is a 82uH SMT inductor with dual-ended terminals. It operates b/w -40 to 125°C, handling 0.045A current. Ideal for RF applications due to its 11MHz self-resonance frequency and ferrite core material.
45 mA
10 Ω
PM127SH-100M-RC
Bourns PM127SH-100M-RC is a shielded, surface mount inductor with 10uH nominal inductance and 6A max current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 17MHz.
10 μH
6 A
19.5 mΩ
4949
Copper Nickel Tin
0.492 in (12.5 mm)
0.295 in (7.5 mm)
e2
PM127SH-330M-RC
Bourns PM127SH-330M-RC is a shielded SMT inductor with 33uH nominal inductance, 3.5A max current, and 9.5MHz self-resonance freq. Ideal for power applications due to its ferrite core material, it operates b/w -40°C to 125°C temp range.
33 μH
3.5 A
57 mΩ
9.5 MHz
PM127SH-470M-RC
Bourns PM127SH-470M-RC is a shielded SMT inductor with 47uH nominal inductance, 2.9A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.
47 μH
2.9 A
7.5 MHz
PM127SH-4R7N-RC
The Bourns PM127SH-4R7N-RC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 8.2A max rated current. Ideal for power applications, it features a ferrite core material, operates b/w -40 to 125°C, and has a self-resonance frequency of 30MHz.
8.2 A
15.5 mΩ
40 %
30 MHz
PM1812-470J-RC
Bourns PM1812-470J-RC is a 47uH SMT inductor with dual-ended terminals. It operates at -40 to 125°C, handling max current of 0.14A. Ideal for power applications due to its high Q factor and ferrite core material.
140 mA
50
5 Ω
10 MHz
2.52 MHz
1812
0.126 in (3.2 mm)
Tape and Reel, 7 in
PM32-180M-RC
Bourns PM32-180M-RC is a fixed inductor with 18uH nominal inductance, 0.3A max current, and 28MHz self-resonance freq. Ideal for power applications, it's a surface mount component with dual-ended terminals and ferrite core material.
300 mA
18
550 mΩ
28 MHz
1211
Unshielded
-30 °C (-22 °F)
100 °C (212 °F)
Silver Nickel Tin
0.118 in (3 mm)
0.11 in (2.8 mm)
Tape and Reel
PM5022H-R78M-RC
Bourns PM5022H-R78M-RC is a fixed inductor with 0.78uH nominal inductance, 15A max current, and 125°C max operating temp. Ideal for power applications, it features dual-ended terminals, ferrite core material, and WRAPAROUND terminal shape.
780 nH
15 A
2.6 mΩ
104 MHz
8759
Copper Tin
0.866 in (22 mm)
0.276 in (7 mm)
0.591 in (15 mm)
PM74SH-221M-RC
Bourns PM74SH-221M-RC is a shielded, surface mount inductor with 220uH nominal inductance. It operates b/w -40 to 125°C, with max current of 0.64A and self-resonance frequency of 4.5MHz. Ideal for power applications due to its general purpose design and ferrite core material.
220 μH
640 mA
690 mΩ
4.5 MHz
2828
Tin Copper
PM74SH-391M-RC
Bourns PM74SH-391M-RC is a shielded, surface mount fixed inductor with 390uH nominal inductance. It operates b/w -40 to 125°C, with max current of 0.54A and self-resonance frequency of 3.6MHz. Ideal for power applications due to its general purpose design and ferrite core material.
390 μH
540 mA
1 Ω
3.6 MHz
PM75-101K-RC
The Bourns PM75-101K-RC is a surface mount fixed inductor with 100uH nominal inductance, 0.45 ohm DC resistance, and 10% tolerance. It is a general-purpose power inductor suitable for applications requiring a max rated current of 0.72A and operating temperatures ranging from -40°C to 125°C.
100 μH
720 mA
450 mΩ
3131
0.307 in (7.8 mm)
0.209 in (5.3 mm)
PM75-331K-RC
Bourns PM75-331K-RC is a surface mount fixed inductor with 330uH nominal inductance, 1.26 ohm DC resistance, and 10% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.4A.
330 μH
400 mA
1.26 Ω
5 MHz
PM0805-6N8M-RC
The Bourns PM0805-6N8M-RC is a surface mount fixed inductor with a nominal inductance of 0.0068 uH, suitable for RF applications. It has a max rated current of 0.6 A, operates b/w -40 to 125 °C, and features a Q factor measured at 1000MHz.
6.8 nH
600 mA
110 mΩ
5500 MHz
250 MHz
Q Factor is measured at 1000 MHz
0805
Alumina
Gold Over Nickel
0.079 in (2 mm)
0.047 in (1.2 mm)
0.049 in (1.25 mm)
e4
PM1008-10NM-RC
Bourns PM1008-10NM-RC is a surface mount fixed inductor with 0.01uH nominal inductance, 0.6A max current, and 50 min quality factor at L-nom. Ideal for RF applications due to its 4100MHz self-resonance frequency and ceramic core material.
10 nH
4100 MHz
100 MHz
Q is measured at 500 MHz
1008
Ceramic
0.063 in (1.6 mm)
PM5022-102M-RC
Bourns PM5022-102M-RC is a surface mount fixed inductor with 1000uH nominal inductance, 1.8 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for power applications, featuring dual-ended terminals and ferrite core material. Operating temperature ranges from -40°C to 125°C with a max rated current of 0.5A.
1 mH
500 mA
1.8 Ω
2 MHz
7255
0.72 in (18.3 mm)
0.26 in (6.6 mm)
0.551 in (14 mm)
AGP4233-103ME
Coilcraft
AGP4233-103ME by Coilcraft is a shielded power inductor with 10uH nominal inductance, 34A max current, and 165°C max operating temp. Ideal for PCB mount applications, this general purpose inductor features a ferrite core and flat terminals suitable for various electronic devices.
34 A
2.95 mΩ
18.8 MHz
165 °C (329 °F)
Radial
Flat
Tin/Silver
PCB Mount
1.547 in (39.3 mm)
1.102 in (28 mm)
1.409 in (35.8 mm)
Tray
AEC-Q200
AGP4233-104ME
AGP4233-104ME by Coilcraft is a shielded fixed inductor with 100uH nominal inductance, suitable for power applications. With a max rated current of 34A and self-resonance frequency of 5.2MHz, it operates b/w -40 to 165°C. This general-purpose inductor features a rectangular package design for PCB mounting.
5.2 MHz
AGP4233-154ME
AGP4233-154ME by Coilcraft is a shielded fixed inductor with 150uH nominal inductance, suitable for power applications. It has a max rated current of 34A and operates b/w -40 to 165°C. With a self-resonance frequency of 4.2MHz, it is ideal for PCB mount setups requiring general purpose inductors.
150 μH
4.2 MHz
AGP4233-223ME
AGP4233-223ME by Coilcraft is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. With a max rated current of 34A and self-resonance frequency of 12MHz, it operates b/w -40 to 165°C. This general-purpose inductor features radial terminal placement and tin/silver finish, ideal for PCB mounting.
12 MHz
AGP4233-224ME
AGP4233-224ME by Coilcraft is a shielded power inductor with 220uH nominal inductance, 17.5A max current, and -40 to 165°C operating temp range. Ideal for PCB mount applications, it features a ferrite core, flat terminals, and AEC-Q200 reference standard compliance.
17.5 A
11.55 mΩ
AGP4233-333ME
AGP4233-333ME by Coilcraft is a shielded fixed inductor with 33uH nominal inductance, suitable for power applications. With a max rated current of 34A and operating temperature range from -40 to 165°C, it offers high performance. Its rectangular package design with radial terminal placement makes it ideal for PCB mounting.
AGP4233-334ME
Coilcraft's AGP4233-334ME is a shielded fixed inductor with 330uH nominal inductance, suitable for power applications. With a max rated current of 17.5A and self-resonance frequency of 4.1MHz, it operates b/w -40 to 165°C. Ideal for PCB mounting, this general purpose inductor features tin/silver terminal finish and ferrite core material.
4.1 MHz
AGP4233-473ME
Coilcraft's AGP4233-473ME is a shielded fixed inductor with 47uH nominal inductance, suitable for power applications. With a max rated current of 34A and self-resonance frequency of 8.5MHz, it operates b/w -40°C to 165°C. This general-purpose inductor features a ferrite core and tin/silver terminal finish, making it ideal for PCB mount installations.
8.5 MHz
AGP4233-474ME
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): PCB Mount; Shielded: YES; Surface Mount: NO;
AGP4233-683ME
Coilcraft's AGP4233-683ME is a shielded power inductor with 68uH nominal inductance, suitable for PCB mount. With a max rated current of 34A and operating temperature range from -40 to 165°C, it is ideal for general purpose applications requiring high performance and reliability.
6.4 MHz
ELL8TP102MB
Panasonic
Panasonic ELL8TP102MB is a shielded, surface mount fixed inductor with 1000uH nominal inductance. Ideal for power applications, it has a max rated current of 0.33A and operates b/w -40 to 105°C.
330 mA
2.1 Ω
DC Resistance measured at 20% Tolerance
105 °C (221 °F)
0.315 in (8 mm)
0.185 in (4.7 mm)
Tape and Reel, Embossed
ELL8TP221MB
Panasonic ELL8TP221MB is a shielded, dual-ended SMT inductor with 220uH nominal inductance. Ideal for power applications, it has a max rated current of 0.7A and operates b/w -40 to 105°C. With a compact size of 8x8x4.7mm, this general purpose inductor features ferrite core and wraparound terminals.
700 mA
480 mΩ
ELL8TP2R5NB
Panasonic ELL8TP2R5NB is a shielded, dual-ended SMT inductor with 2.5uH nominal inductance and 6.5A max current rating. Ideal for power applications, it features a ferrite core, 105°C max operating temp, and compact 8x8mm package size.
2.5 μH
6.5 A
7 mΩ
ELL8TP330MB
Panasonic ELL8TP330MB is a shielded, surface mount fixed inductor with 33uH nominal inductance. It has a max rated current of 1.6A and operates b/w -40 to 105°C, making it ideal for power applications requiring high efficiency and reliability.
84 mΩ
ELL8TP470MB
Panasonic ELL8TP470MB is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 1.5A and operates b/w -40 to 105°C, making it ideal for power applications requiring general purpose inductors.
1.5 A
100 mΩ
HCMA1104-1R0-R
Eaton Corporation
Eaton Corporation's HCMA1104-1R0-R is a shielded, dual-ended fixed inductor with 1uH nominal inductance and 18A max rated current. Ideal for high current applications, this SMT inductor features a powdered iron core, operates b/w -55°C to 125°C, and has a compact rectangular package measuring 11.1mm x 10mm x 4mm.
High Current Inductor
18 A
3.3 mΩ
4439
Powdered Iron
0.437 in (11.1 mm)
0.394 in (10 mm)
Tape and Reel, 13 in
MLF1005VR12JTD25
TDK
The TDK MLF1005VR12JTD25 is a shielded, dual-ended fixed inductor with 0.12uH nominal inductance and 0.18A max rated current. Ideal for RF applications, this general-purpose inductor operates b/w -55°C to 125°C and features a self-resonance frequency of 400MHz.
120 nH
180 mA
10
590 mΩ
400 MHz
25 MHz
Inductance is measured at 1 mA
0402
0.039 in (1 mm)
0.02 in (0.5 mm)
Tape and Reel, Punched Paper, 7 in
SRP1245A-R20M
Bourns SRP1245A-R20M is a shielded, surface mount fixed inductor with 0.2 uH nominal inductance and 52 A max rated current. Ideal for power applications, it features a rectangular package, 150 °C max operating temp, and CARBONYL POWDER core material.
200 nH
52 A
550 μΩ
130 MHz
5349
Carbonyl Powder
150 °C (302 °F)
0.531 in (13.5 mm)
0.189 in (4.8 mm)
© 2023 All rights reserved