Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
AD5243BRM50-RL7
Analog Devices
AD5243BRM50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Suitable for automotive applications, it operates b/w -40 to 125 °C and has a bandwidth of 0.1 kHz.
Digital Potentiometers
100 Hz
Linear
50 KΩ
2-Wire Serial
2
20 %
It also operates at 5 V supply
3 V
0 V
5.5 V
-40 °C (-40 °F)
125 °C (257 °F)
Automotive
35 ppm/°C
240 °C (464 °F)
1
Gull Wing
Dual
10
Tin Lead
0.02 in (0.5 mm)
256
0.043 in (1.1 mm)
0.118 in (3 mm)
Square
Plastic/Epoxy
Small Outline, Thin Profile, Shrink Pitch
TSSOP
TSSOP10,.19,20
No
S-PDSO-G10
e0
AD5243BRM50
AD5243BRM50 by Analog Devices is a 2-function, 50000 ohm digital potentiometer with linear resistance law. It operates on 3/5V supplies, has 256 positions, and uses a 2-wire serial control interface. Ideal for automotive applications due to its small outline package and wide temperature range of -40 to 125 °C.
AD5248BRM10-RL7
AD5248BRM10-RL7 by Analog Devices is a 2-function digital potentiometer with 10k ohm total resistance, controlled via 2-wire serial interface. Suitable for automotive applications, it operates b/w -40 to 125 °C with a bandwidth of 0.6 kHz.
600 Hz
10 KΩ
AD5248BRM100-RL7
AD5248BRM100-RL7 by Analog Devices is a 2-function digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. It operates on 3/5V supplies, has a linear resistance law, and uses a 2-wire serial control interface. Ideal for automotive applications due to its small outline package and wide operating temperature range.
40 Hz
100 KΩ
AD5248BRM100
AD5248BRM100 by Analog Devices is a 2-function, 100k ohm digital potentiometer with 2-wire serial control interface. It operates b/w -40 to 125 °C and has a resistance tolerance of 20%. Ideal for automotive applications due to its small outline package style and low temperature coefficient of 35 ppm/°C.
AD5248BRM50-RL7
AD5248BRM50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a bandwidth of 0.1 kHz.
AD5248BRM50
AD5248BRM50 by Analog Devices is a 2-function, 10-terminal digital potentiometer with 256 positions and a total resistance of 50k ohm. It operates on 3/5V supplies, has a linear resistance law, and uses a 2-wire serial control interface. Ideal for automotive applications due to its wide temperature range and small form factor.
DS1859B-020
Maxim Integrated
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: LBGA; Package Shape: SQUARE;
20 KΩ
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply
3.3 V
-300 mV
3.6 V
0 °C (32 °F)
70 °C (158 °F)
Commercial
50 ppm/°C
245 °C (473 °F)
3
Ball
Bottom
16
0.039 in (1 mm)
0.059 in (1.5 mm)
0.157 in (4 mm)
GRID ARRAY, LOW PROFILE
LBGA
BGA16,4X4,40
S-PBGA-B16
DS1859B-050
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply
MAX5418META
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
BICMOS
50 Hz
5 V
85 °C (185 °F)
Industrial
No Lead
8
0.026 in (0.65 mm)
0.031 in (0.8 mm)
Small Outline, Heat Sink/Slug, Very Thin Profile
HVSON
SOLCC8,.12,25
S-XDSO-N8
MAX5419NETA
25 Hz
200 KΩ
MAX5403EUB-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
Nickel Palladium Gold
e4
MAX5408ETE-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
Logarithmic
3-Wire Serial
Quad
32
Chip Carrier, Heat Sink/Slug, Very Thin Profile
HVQCCN
LCC16,.16SQ,25
S-XQCC-N16
MAX5418META-T
MAX5428EUA-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Increment/Decrement
TSSOP8,.19
S-PDSO-G8
MAX5450EUB-T
CMOS
ADN2860ACPZ25-RL7
ADN2860ACPZ25-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 3 functions, 25000 ohm total resistance, and +-2.5/3/5 V power supplies. It is used in industrial applications for precise voltage control in tight spaces due to its compact square chip carrier package style.
125 Hz
Linear/Logarithmic
25 KΩ
15 %
Nonvolatile memory; can also support dual supply operation
2.5 V
2.25 V
2.75 V
-2.5 V
260 °C (500 °F)
24
Matte Tin
512
LCC24,.16SQ,20
S-XQCC-N24
e3
ADN2860ACPZ250-RL7
ADN2860ACPZ250-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 3 functions, 250k ohm resistance, and +-2.5/3/5 V power supplies. It is used in industrial applications for precise voltage control in tight spaces due to its compact square chip carrier package style.
12 Hz
250 KΩ
MAX5477ETE
MAX5477ETE by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 256 positions, and 70 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in a compact square package.
400 Hz
Nonvolatile memory; other resistor array is: 10000 Ω with 256 tap positions
70 ppm/°C
LCC16,.12SQ,20
AD5172BRMZ100
AD5172BRMZ100 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and 35 ppm/°C temperature coefficient. Ideal for automotive applications due to its small outline package and wide operating temperature range from -40 to 125 °C.
AD5172BRMZ50
AD5172BRMZ50 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a max terminal voltage of 5.5 V. The compact package style features a small outline and thin profile, making it suitable for space-constrained designs.
It can also operate from 5 V nominal supply
AD5172BRMZ50-RL7
AD5172BRMZ50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V, offering precise resistance adjustments in compact design.
AD5220BRMZ50
AD5220BRMZ50 by Analog Devices is a digital potentiometer with 50000 ohm total resistance, 128 positions, and 800 ppm/°C temperature coefficient. It is used in industrial applications for precise control of resistance values in circuits with a supply voltage of 3V or 5V.
142 Hz
30 %
Also operates at 5 V supply
800 ppm/°C
128
ADN2850BCPZ250
ADN2850BCPZ250 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 2 functions, 250k ohm total resistance, and 35 ppm/°C temp coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact spaces. Operates b/w -40 to 85 °C with +-2.5/3.3/5 V supplies.
8 %
Nonvolatile memory
-2.25 V
30 s
1024
0.197 in (5 mm)
LCC16,.2SQ,32
ADN2850BCPZ250-RL7
ADN2850BCPZ250-RL7 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 2 functions and 1024 positions. It has a total resistance of 250k ohm, operates b/w -40 to 85 °C, and offers linear/logarithmic resistance law. Ideal for industrial applications requiring precise voltage control in compact spaces.
ADN2850BCPZ25-RL7
Analog Devices' ADN2850BCPZ25-RL7 is a 3-WIRE SERIAL digital potentiometer with 2 functions and 25000 ohm total resistance. Ideal for industrial applications, it operates b/w -40 to 85 °C with a temperature coefficient of 35 ppm/°C. Its compact chip carrier package has a low profile of just 1 mm, making it suitable for space-constrained designs.
AD5170BRMZ10
AD5170BRMZ10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 256 positions, and 35 ppm/°C temperature coefficient. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V at terminals.
AD5220BRMZ50-RL7
AD5220BRMZ50-RL7 by Analog Devices is a 50000 ohm digital potentiometer with linear resistance law. It operates at temperatures from -40 to 85 °C and has a max voltage of 5.5 V. Ideal for industrial applications requiring precise increment/decrement control in compact designs.
ADN2850BCPZ25
ADN2850BCPZ25 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 1024 positions and 25000 ohm total resistance. It operates in industrial temperature range (-40 to 85 °C) with +-2.5/3.3/5 V supplies, suitable for various applications requiring precise resistance adjustments in compact form factor.
AD5259BRMZ50
AD5259BRMZ50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm resistance, 256 positions, and 30% tolerance. It operates at -40 to 85 °C and has a max terminal voltage of 3 V. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
160 Hz
Nonvolatile memory; it can also operate from a 5 V nominal supply
MAX5496ETE
250 Hz
Nonvolatile; other resistor value is 10000 Ω w/1024 tap postions; also operate w/2.5 V dual supply
MAX5498ETE
AD5220BRMZ10
AD5220BRMZ10 by Analog Devices is a digital potentiometer with 10000 ohm total resistance, 128 positions, and 800 ppm/°C temperature coefficient. It is used in industrial applications for increment/decrement control interface, offering linear resistance law and 3/5 V power supplies.
650 Hz
AD5170BRMZ100
AD5170BRMZ100 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V.
It can also operate from a 5 V nominal supply
AD5170BRMZ50
AD5170BRMZ50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 35 ppm/°C temperature coefficient, and 256 positions. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V.
AD5172BRMZ10-RL7
AD5172BRMZ10-RL7 by Analog Devices is a 2-function digital potentiometer with 10 terminals, 256 positions, and a total resistance of 10k ohm. It operates b/w -40 to 125 °C and has a linear resistance law. Suitable for automotive applications, it features a 2-wire serial control interface and operates on power supplies of 3-5 V.
AD5172BRMZ10
AD5172BRMZ10 by Analog Devices is a 2-function, 10kΩ digital potentiometer with 35 ppm/°C temp coefficient. It features a 2-wire serial control interface and operates b/w -40 to 125 °C. Ideal for automotive applications due to its small outline package and low resistance tolerance of 20%.
AD5248BRMZ100
AD5248BRMZ100 by Analog Devices is a 2-function digital potentiometer with 100k ohm total resistance, controlled via 2-wire serial interface. Suitable for automotive applications, it operates b/w -40 to 125 °C with a max voltage of 5.5 V, offering precise linear resistance adjustments in a compact square package.
AD5248BRMZ10
AD5248BRMZ10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10k ohm total resistance, suitable for automotive applications. It offers linear resistance law, 256 positions, and operates b/w -40 to 125 °C. Ideal for precise voltage control in compact designs with its small outline package style.
AD5248BRMZ50
AD5248BRMZ50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, suitable for automotive applications. It has a linear resistance law, operates at -40 to 125 °C, and offers 256 positions. With a small outline package style and matte tin finish, it's ideal for compact designs requiring precise resistance control.
CAT5140ZI-00-GT3
Onsemi
CAT5140ZI-00-GT3 by Onsemi is a 2-WIRE SERIAL digital potentiometer with 100000 ohm total resistance, 256 positions, and 100 ppm/°C temperature coefficient. It is ideal for industrial applications requiring precise resistance adjustments in a compact package with a wide operating temperature range of -40 to 85 °C.
100 ppm/°C
Nickel/Palladium/Gold
AD5173BRMZ50-RL7
AD5173BRMZ50-RL7 by Analog Devices is a 2-function digital potentiometer with 50000 ohm total resistance, controlled via 2-wire serial interface. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a max terminal voltage of 5.5 V.
AD5173BRMZ100
AD5173BRMZ100 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and 35 ppm/°C temperature coefficient. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125 °C.
AD5173BRMZ10
AD5173BRMZ10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, suitable for automotive applications. It offers linear resistance law, 256 positions, and operates b/w -40 to 125 °C. Ideal for precise voltage control in compact designs with its small outline package style.
AD5173BRMZ50
AD5173BRMZ50 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 3V/5V.
MCP4011-502E/MS
Microchip Technology
MCP4011-502E/MS by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 2 kHz. Ideal for automotive applications, it features an increment/decrement control interface and operates on 3/5 V supplies.
2 kHz
5 KΩ
450 μA
150 ppm/°C
40 s
64
Small Outline
SOP
SOP8,.19
TS 16949
MCP4011-503E/MS
MCP4011-503E/MS by Microchip is a 50k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a supply voltage of 3/5 V. Ideal for automotive applications, it features an increment/decrement control interface in a small outline package.
200 Hz
MAX5484ETE
Nonvolatile memory; it can also operate with 2.5 V dual supply
© 2023 All rights reserved
