Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
CAT5112VI-10-T3
Onsemi
CAT5112VI-10-T3 by Onsemi is a Digital Potentiometer with 10000 ohm resistance, 300 ppm/°C temp coefficient, and 32 positions. It operates b/w -40 to 85 °C and has a CMOS technology for industrial applications requiring precise resistance control in compact designs.
CMOS
Linear
10 KΩ
Increment/Decrement
1
20 %
Nonvolatile memory
3 V
0 V
-40 °C (-40 °F)
85 °C (185 °F)
Industrial
300 ppm/°C
260 °C (500 °F)
30 s
Gull Wing
Dual
8
Tin
0.05 in (1.27 mm)
32
0.069 in (1.75 mm)
0.154 in (3.9 mm)
0.193 in (4.9 mm)
Rectangular
Plastic/Epoxy
Small Outline
SOP
No
R-PDSO-G8
e3
CAT5116ZI-T3
CAT5116ZI-T3 by Onsemi is a digital potentiometer with 32000 ohm total resistance, 300 ppm/°C temp coefficient, and logarithmic resistance law. It is used in industrial applications for increment/decrement control interface, with 8 terminals and 100 positions.
Digital Potentiometers
Logarithmic
32 KΩ
0.026 in (0.65 mm)
100
0.043 in (1.1 mm)
0.118 in (3 mm)
Square
Small Outline, Thin Profile, Shrink Pitch
TSSOP
TSSOP8,.19
S-PDSO-G8
AD5220BRMZ100-R7
Analog Devices
AD5220BRMZ100-R7 by Analog Devices is a digital potentiometer with 100k ohm total resistance, 128 positions, and linear resistance law. It operates at -40 to 85°C, has a control interface for increment/decrement, and is ideal for industrial applications requiring precise resistance adjustments.
69 Hz
100 KΩ
30 %
Also operates at 5 V supply
5.5 V
800 ppm/°C
Matte Tin
128
AD5220BRZ100-REEL7
AD5220BRZ100-REEL7 by Analog Devices is a Digital Potentiometer with 100k ohm resistance, 128 positions, and 800 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
SOP8,.25
DS1804UR-050
Maxim Integrated
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
200 Hz
50 KΩ
5 V
-500 mV
750 ppm/°C
Tin Lead
e0
DS4301Z-200
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
200 KΩ
-300 mV
3.3 V
CAT5126VP2I-10-GT3
Catalyst Semiconductor
CAT5126VP2I-10-GT3 by Catalyst Semiconductor is a Digital Potentiometer with 10000 ohm resistance, 50 ppm/°C temp coefficient, and 32 positions. It operates b/w -40 to 85 °C and has a control interface for increment/decrement. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
50 ppm/°C
No Lead
Nickel Palladium Gold
0.02 in (0.5 mm)
0.031 in (0.8 mm)
0.079 in (2 mm)
Small Outline, Heat Sink/Slug, Very Thin Profile
HVSON
SOLCC8,.11,20
R-XDSO-N8
e4
MCP4131-104E/P
Microchip Technology
MCP4131-104E/P by Microchip is a 100k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 129 positions for precise control. Ideal for automotive applications, it features an increment/decrement interface and low power consumption of 1 mA at 5 V supply voltage.
100 Hz
1 mA
125 °C (257 °F)
Automotive
150 ppm/°C
Through-Hole
0.1 in (2.54 mm)
129
0.21 in (5.334 mm)
0.3 in (7.62 mm)
0.365 in (9.271 mm)
In-Line
DIP
DIP8,.3
R-PDIP-T8
MCP4132-103E/MS
MCP4132-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide temperature range.
1 kHz
40 s
MCP4132-103E/SN
MCP4132-103E/SN by Microchip is a 10000 ohm linear digital potentiometer with 129 positions. It operates at -40 to 125 °C, suitable for automotive applications. With a control interface of increment/decrement, it has a max supply current of 1 mA and nominal bandwidth of 1 kHz.
MCP4132-104E/P
MCP4132-104E/P by Microchip is a Digital Potentiometer with 100kΩ resistance, 150 ppm/°C temp coefficient, and 5V max terminal voltage. It is used in automotive applications for increment/decrement control interface in CMOS technology.
MCP4141-103E/P
MCP4141-103E/P by Microchip is a 10k ohm linear digital potentiometer with 129 positions. It operates at -40 to 125 °C and has a max resistor terminal voltage of 5V. Ideal for automotive applications, it features an increment/decrement control interface in an in-line package style.
MCP4141-104E/MS
MCP4141-104E/MS by Microchip is a digital potentiometer with 100k ohm total resistance, 150 ppm/°C temp coefficient, and linear resistance law. It is used in automotive applications for increment/decrement control interface, with 129 positions and 1mA max supply current.
MCP4141-104E/P
MCP4141-104E/P by Microchip is a 100k ohm linear digital potentiometer with 129 positions. It operates at -40 to 125 °C and has a max resistor terminal voltage of 5V. Ideal for automotive applications, it features an increment/decrement control interface in an in-line package style.
MCP4141-502E/MF
MCP4141-502E/MF by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at 1.8/5 V, has 129 positions, and a bandwidth of 2 kHz. Ideal for automotive applications due to its compact size, low power consumption (1 mA), and wide temperature range (-40 to 125 °C).
2 kHz
5 KΩ
0.039 in (1 mm)
SOLCC8,.12,25
S-PDSO-N8
MCP4141-502E/MS
MCP4141-502E/MS by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, suitable for automotive applications. Features include 129 positions, increment/decrement control interface, and 2 kHz nominal bandwidth.
MCP4141-502E/P
MCP4141-502E/P by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at 1.8/5V, has 129 positions, and a bandwidth of 2 kHz. Ideal for automotive applications due to its temperature grade and through-hole terminal form.
MCP4141-502E/SN
MCP4141-502E/SN by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 2 kHz, suitable for automotive applications. With INCREMENT/DECREMENT control interface, it offers 129 positions and consumes max 1 mA at 5 V supply voltage.
MCP4141-503E/SN
MCP4141-503E/SN by Microchip is a digital potentiometer with 50000 ohm resistance, 150 ppm/°C temp coefficient, and 129 positions. It is used in automotive applications for increment/decrement control interface, with a max operating temp of 125 °C and supply voltage of 5 V.
MCP4142-103E/MS
MCP4142-103E/MS by Microchip Technology is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a control interface for increment/decrement. Suitable for automotive applications, it features a small outline package with 8 terminals and operates on 1.8/5 V supplies.
MCP4151-103E/MF
MCP4151-103E/MF by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 257 positions for increment/decrement control interface. Suitable for automotive applications, it features a small outline package with very thin profile and matte tin terminal finish.
257
MCP4151-103E/MS
MCP4151-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 257 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide temperature range.
MCP4151-502E/SN
MCP4151-502E/SN by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at temperatures from -40 to 125 °C and has a bandwidth of 2 kHz. Ideal for automotive applications, it features an increment/decrement control interface and operates on 1.8/5 V power supplies.
MCP4151T-103E/MF
MCP4151T-103E/MF by Microchip: 10k ohm, 150 ppm/°C temp coef, 5.5V max terminal voltage. Ideal for automotive applications due to -40 to 125 °C operating range and compact square package with increment/decrement control interface.
MCP4151T-502E/MS
MCP4151T-502E/MS by Microchip Technology is a digital potentiometer with a nominal total resistance of 5000 ohm and a max resistor terminal voltage of 5 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MCP4152-502E/P
MCP4152-502E/P by Microchip Tech is a 5000 ohm DigiPOT with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its CMOS technology and 150 ppm/°C temp coefficient.
MCP4161-103E/MF
MCP4161-103E/MF by Microchip Tech is a 10k ohm DigiPOT with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide operating temperature range.
MCP4161-103E/SN
MCP4161-103E/SN by Microchip is a digital potentiometer with 10000 ohm total resistance, 150 ppm/°C temp coefficient, and linear resistance law. It is used in automotive applications for increment/decrement control interface, with 129 positions and 1 kHz nominal bandwidth.
MCP4161T-103E/MS
MCP4161T-103E/MS by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide temperature range.
MCP4162-103E/P
MCP4162-103E/P by Microchip Technology is a digital potentiometer with a linear resistance law and a nominal total resistance of 10k ohm. It has a control interface for incrementing and decrementing, making it suitable for applications requiring precise resistance adjustments.
MCP4162-103E/SN
MCP4162-103E/SN by Microchip is a 10k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 129 positions for precise control. Ideal for automotive applications, it features a CMOS technology, increment/decrement interface, and small outline package.
MCP4162-104E/P
MCP4162-104E/P by Microchip is a 100k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a max supply current of 1 mA. Ideal for automotive applications, it features an increment/decrement control interface and a total of 129 positions for precise adjustments.
MCP4162-502E/P
MCP4162-502E/P by Microchip is a 5000 ohm linear digital potentiometer with 129 positions. It operates at -40 to 125 °C and has a bandwidth of 2 kHz, making it suitable for automotive applications. The device features an increment/decrement control interface and operates on 1.8/5 V supplies, with a max terminal voltage of 5 V.
MCP4162-502E/SN
MCP4162-502E/SN by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at 1.8/5 V, has 129 positions, and offers an increment/decrement control interface. Ideal for automotive applications due to its small outline package and wide temperature range of -40 to 125 °C.
MCP4162-503E/MF
MCP4162-503E/MF by Microchip is a 50k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 0.2 kHz. Ideal for automotive applications, it features increment/decrement control interface and operates on 1.8/5 V supplies.
MCP4162-503E/MS
MCP4162-503E/MS by Microchip is a 50k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 129 positions for precise control. Ideal for automotive applications, it features a compact square package with surface mount capability.
MCP4162-503E/SN
MCP4162-503E/SN by Microchip is a Digital Potentiometer with 50000 ohm resistance, 150 ppm/°C temp coefficient, and 1 mA max supply current. Ideal for automotive applications, it features INCREMENT/DECREMENT control interface in a small outline package with -40 to 125 °C operating temp range.
MAX5433LETA-T
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
BICMOS
250 Hz
2-Wire Serial
35 ppm/°C
245 °C (473 °F)
S-XDSO-N8
AD5220WBRZ10-REEL7
AD5220WBRZ10-REEL7 by Analog Devices is a Digital Potentiometer with 10000 ohm resistance, 128 positions, and 800 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise control over resistance values in a compact package.
650 Hz
AEC-Q100
AD5160BRJZ50-R2
AD5160BRJZ50-R2 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 45 ppm/°C temperature coefficient. It is ideal for automotive applications due to its low profile design, -40 to 125 °C operating temperature range, and matte tin terminal finish.
3-Wire Serial
It can also operate from a 5 V nominal supply
45 ppm/°C
256
0.057 in (1.45 mm)
0.063 in (1.6 mm)
0.114 in (2.9 mm)
Small Outline, Low Profile, Shrink Pitch
LSSOP
TSSOP8,.1
MCP41100-I/P
MCP41100-I/P by Microchip is a 100k ohm digital potentiometer with 3-wire serial control interface. It operates at -40 to 85 °C and has a resistance tolerance of 20%. Ideal for industrial applications, it offers a bandwidth of 0.145 kHz and requires only 0.6 mA supply current at 5 V.
145 Hz
600 μA
0.17 in (4.32 mm)
0.372 in (9.46 mm)
TS 16949
MCP41050-I/P
MCP41050-I/P by Microchip Tech is a 3-WIRE SERIAL digital potentiometer with 50000 ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C for industrial applications, offering a bandwidth of 0.28 kHz. Ideal for precise voltage control in various electronic systems.
280 Hz
AD8400AR50-REEL
AD8400AR50-REEL by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, suitable for automotive applications. It operates at -40 to 125 °C and has a bandwidth of 0.125 kHz. The package style is small outline, making it ideal for compact designs.
125 Hz
500 ppm/°C
240 °C (464 °F)
MAX5428EUA
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MAX5429EUA
AD5273BRJ1-R2
AD5273BRJ1-R2 by Analog Devices is a 1000 ohm linear digital potentiometer with 2-wire serial control interface. It operates b/w -40 to 105 °C, has 64 positions, and a bandwidth of 6 kHz. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
6 kHz
1 KΩ
105 °C (221 °F)
64
AD5273BRJ10-R2
AD5273BRJ10-R2 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 64 positions, and 30% tolerance. It operates b/w -40 to 105 °C and has a bandwidth of 0.6 kHz. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
600 Hz
AD5273BRJ50-R2
AD5273BRJ50-R2 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 300 ppm/°C temp coefficient, and 64 positions. It is used in industrial applications for precise resistance adjustments in compact designs with a low profile package style.
110 Hz
© 2023 All rights reserved
