Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Telecom and datacom connectors are a type of connector used in telecommunications and data communications systems to connect various components and devices together. They are designed to provide reliable and secure connections that can handle high-speed data transmission and telecommunications signals.Telecom and datacom connectors come in a wide range of types and configurations, including fiber optic connectors, copper connectors, and wireless connectors. Each type of connector is designed for specific applications and requirements, such as high-speed data transmission, long-distance communication, and rugged environments.One advantage of telecom and datacom connectors is their compatibility with a wide range of devices and components, including switches, routers, servers, and other network equipment. They are also designed to provide low insertion loss and high return loss, ensuring reliable and high-quality signal transmission.Telecom and datacom connectors are commonly used in a variety of industrial, commercial, and consumer applications, including telecommunications, data centers, and wireless networks. They may be subject to rigorous testing and qualification requirements to ensure their reliability and performance.
Add filters
All
Selected
1981080-1
TE Connectivity
TE Connectivity's 1981080-1 is a Telecom & Datacom Connector with 8 contacts, 0.208" body depth, and TIN shell finish. Ideal for board mounting applications in telecom and datacom systems due to its UL 94V-0 flammability rating and surface mount termination.
.208 inch
JACK
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
MALE
RECTANGULAR
NO
RIGHT ANGLE
BOARD
ONE
1
2
GENERAL PURPOSE
UL
TIN
COPPER ALLOY
SURFACE MOUNT
8
94V-0
5406526-1
TE Connectivity's 5406526-1 is a Telecom & Datacom Connector with Polyethylene insulator, rated for -40 to 85°C. Featuring 8 contacts, it has a plating thickness of 50u and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
.505 inch
NOT APPLICABLE
YES
BLACK
POLYETHYLENE
1.5A
85
-40 Cel
50u
1.5 A
.1 inch
1.02
SOLDER
A-USBSA
Assmann Wsw Components
A-USBSA by Assmann Wsw Components is a Telecom & Datacom Connector with 4 contacts, POLYBUTYLENE TEREPHTHALATE insulator, and Tin (Sn) finish. It is a female right-angle connector for board mounting applications with UL 94V-0 flammability rating.
Tin (Sn) - with Nickel (Ni) barrier
FEMALE
POLYBUTYLENE TEREPHTHALATE
e3
4
74990111217
Wurth Elektronik
74990111217 by Wurth Elektronik is a Telecom & Datacom Connector with 0.839" body length, 0.63" width, and 0.533" depth. It features 8 contacts, staggered PCB pattern, and solder termination. Ideal for telecom and datacom applications requiring right angle mounting with locking options.
.63 inch
.533 inch
.839 inch
STAGGERED
LOCKING
2.54
30u
NICKEL
THERMOPLASTIC
.142 inch
2007637-5
TE Connectivity 2007637-5 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 80 contacts, operates b/w -55 to 105°C, and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications due to its press fit termination and right angle mounting style.
4 PORTS, 20 POSITIONS EACH, STACKED
LIQUID CRYSTAL POLYMER
115/230VAC
105
-55 Cel
.118 inch
0.8
PRESS FIT
80
2007637-6
TE Connectivity 2007637-6 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Operating temp: -55 to 105°C, UL Flammability: 94V-0. It has 80 contacts, suitable for board mounting in telecom and datacom applications.
USBFTV2PE1G
Amphenol
Amphenol's USBFTV2PE1G is a telecom & datacom connector with -55 to 85°C operating range. Featuring female contact gender, it has UL 94V-0 flammability rating and panel mounting. Ideal for applications requiring straight receptacle style connectors in telecommunications and data communication systems.
POLARIZED
RECEPTACLE
MULTIPLE MATING PARTS AVAILABLE
STRAIGHT
PANEL
RJHSE-538A-02
Amphenol RJHSE-538A-02 is a telecom & datacom connector with 16 contacts, rated for 1.5A signal current. It features matte tin termination, gold over nickel mating contact finish, and polyethylene insulator material. Ideal for board and panel mounting applications in commercial environments with a temperature range of -55 to 85°C.
2 PORTS 8 POSITION EACH
SPLIT BOARD LOCK
.53 inch
.62 inch
1.27 inch
GOLD OVER NICKEL
Matte Tin (Sn) - with Nickel (Ni) barrier
PHOSPHOR BRONZE
20 mohm
TELCOM, MODULAR
1000VAC
750 Cycles
500000000 ohm
MOUNTING FLANGE
BOARD AND PANEL
COMMERCIAL
Telecom and Datacom Connectors
2.032
16
690-004-660-013
Edac
Edac 690-004-660-013 USB connector features copper alloy contacts with gold finish, suitable for telecom/datacom applications. With dimensions of 0.567" x 0.276" x 0.587", it has a total of 4 contacts and is designed for board mounting with solder termination.
.276 inch
.587 inch
.567 inch
USB CONNECTOR
GOLD (30)
USB, SER A FLAT
30
.11 inch
213685-2
TE Connectivity 213685-2 is a Telecom & Datacom Connector with 38 contacts, rated at 250V and 21A. It has a body size of 2.09" x 0.9" x 2.285", suitable for applications requiring high signal current capacity and multiple contact rows in telecom and datacom systems.
SHIELDED
.9 inch
2.285 inch
2.09 inch
S34P4
.4 inch
GLASS FILLED PHENOLIC
21A
0.18
W/STRAIN RELIEF
CABLE
150
21 A
250 V
3.81
CRIMP
38
14 AWG
30 AWG
2-552273-1
TE Connectivity 2-552273-1 is a Telecom & Datacom Connector with 24 contacts, rated at 3.5A signal current. It features a mating contact pitch of 0.085", polyethylene insulator material, and operates b/w -40°C to 75°C. Ideal for commercial applications requiring reliable female connectors with IDC termination on cables using discrete or round wire types.
CHAMP
.6 inch
.202 inch
2.175 inch
DISCRETE, ROUND
CENTRONIC
.045 inch
3.5A
0.085
HOLE .164-.189
SCREWLOCKS
75
POLARIZED HOUSING
3.5 A
Headers and Edge Type Connectors
2.16
IDC
24
24 AWG
26 AWG
552390-1
TE Connectivity 552390-1 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 3.5A signal rating. Ideal for telecom applications, it features POLYPHENYLENE OXIDE insulation, IDC termination type, and operates b/w -40°C to 75°C temperature range.
.483 inch
3.28 inch
PLUG
DISCRETE
2.6966
20000000000 ohm
POLYPHENYLENE OXIDE
D Type Connectors
50
28 AWG
.6672
552285-1
TE Connectivity's 552285-1 is a Telecom & Datacom Connector with 64 contacts, rated at 3.5A signal current. Featuring a mating contact pitch of 0.085", it has a body length of 3.875" and operates b/w -40 to 75°C. Ideal for IDC termination in telecom applications, it supports wire sizes from 26 to 24 AWG and offers reliable performance in commercial settings.
3.875 inch
#4-40 UNC 2B
64
554089-1
TE Connectivity 554089-1 is a Telecom & Datacom Connector with 36 contacts, 0.085" pitch, and polyethylene insulation. It operates b/w -40°C to 75°C, suitable for commercial applications requiring a rated current of 1A. The connector features IDC termination, #4-40 mounting option, and is designed for ribbon cable types.
LOW PROFILE
2.685 inch
RIBBON
155.68
5000000000 ohm
1A
#4-40
1 A
36
44.48
554090-1
TE Connectivity 554090-1 is a Telecom & Datacom Connector with 50 contacts, POLYETHYLENE insulator, and 3.28" body length. It has an insulation resistance of 5G ohm and operates b/w -40 to 75°C. Ideal for commercial applications requiring a rated current of 1A in telecom and datacom systems.
PREASSEM CONN
554954-1
TE Connectivity's 554954-1 is an EMI shielded telecom and datacom connector with a max operating temperature of 75°C and a min operating temperature of -40°C. It has two rows loaded, a shell finish of nickel, and can handle a rated current of 3.5A. This connector is commonly used in applications requiring reliable signal transmission in telecommunications and data communication systems.
BAIL MOUNT
CARBON STEEL
750821-1
TE Connectivity's 750821-1 is a Telecom & Datacom Connector with 26 contacts. It features Tin Lead over Nickel termination, Polyethylene insulator, and Phosphor Bronze contact material. Ideal for board and panel mounting in telecom and datacom applications.
SHIELDED, OTHER STACKING CONNECTOR: 26 CONTACTS
TIN LEAD OVER NICKEL
e0
750821
26
554753-1
TE Connectivity's 554753-1 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 3A signal rating. Ideal for commercial applications, it features polyester insulation, press-fit termination, and operates b/w -55°C to 105°C temperature range.
CHAMP; ACTION PIN
COMPLIANT BOARDLOCK
.477 inch
.24 inch
4.0032
NATURAL
POLYESTER
3A
0.16
4.064
3 A
.18 inch
552827-2
TE Connectivity's 552827-2 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and THERMOPLASTIC insulator. Ideal for commercial applications, it features a panel mount, IDC termination, and FEMALE contact gender.
CHAMP-LOK
.375 inch
552827
552826-1
178627-1
Tyco Electronics Amp
178627-1 by Tyco Electronics Amp is a Telecom & Datacom Connector with 120 contacts. It features TIN LEAD termination, GOLD mating contact finish, and NICKEL shell finish. Ideal for board and panel mounting in telecom and datacom applications.
GOLD (8)
GLASS FILLED POLYAMIDE66
178627
STEEL
SOLDER AND SURFACE MOUNT
120
1-749656-2
TE Connectivity 1-749656-2 is a Telecom & Datacom Connector with 68 contacts, rated at 1A. It features a mating contact pitch of 0.05", insulation resistance of 1Gohm, and operates b/w -55°C to 105°C. Ideal for telecom applications requiring high durability and reliability in commercial settings.
ROHS AND ELV COMPLIANT
.406 inch
.371 inch
2.515 inch
RIBBON, ROUND
25 mohm
SQ PIN-SKT
800 Cycles
1000000000 ohm
0.05
0.1
#2-56
LATCHING
Other Rectangular Connectors
1.27
68
5552791-4
TE Connectivity 5552791-4 is a telecom/datacom connector with 24 contacts, 0.085" mating pitch, and polyethylene insulator. It operates b/w -40°C to 105°C, suitable for commercial applications requiring a rated current of 3.5A in a right-angle board mounting style.
0.169
4.2926
216566-1
TE Connectivity 216566-1 is a Telecom & Datacom Connector with dimensions of 0.709" x 0.622" x 0.646". It features POLYBUTYLENE TEREPHTHALATE insulator, SPLIT BOARD LOCK mounting option, and operates b/w -40°C to 70°C. Ideal for telecom applications due to its UL-rated design, POLARIZED HOUSING, and FEMALE contact gender.
STAGGERED CONFIGURATION
.622 inch
.646 inch
.709 inch
70
47.24u
.122 inch
94-HB
43223-8176
Molex
Molex 43223-8176 is a telecom & datacom connector with 64 contacts, 8 ports, and insulation resistance of 500MOhm. It has a body length of 4.5", dielectric voltage of 1000VAC, and operates b/w -40 to 80°C. Ideal for board mounting applications in telecommunications and data communication systems due to its durability, right-angle mounting style, and solder termination type.
8 PORT, 8-POSITION EACH
PEG
.828 inch
4.5 inch
10 mohm
500 Cycles
GLASS FILLED POLYAMIDE
MULTIPLE MATING PARTS AVAIABLE
CSA, UL
BRASS
71626-1001
The Molex 71626-1001 is a Telecom & Datacom Connector with 160 contacts, 4 loaded rows, and insulation resistance of 100M ohm. It features GLASS FILLED LIQUID CRYSTAL POLYMER insulator material and is suitable for board mounting applications in telecom and datacom systems. With a dielectric voltage of 700VAC, it ensures reliable signal transmission in commercial environments.
LFH
BOARD LOCK
.372 inch
.19 inch
2.75 inch
700VAC
.5004
100000000 ohm
GLASS FILLED LIQUID CRYSTAL POLYMER
N-111; N-112; N-113
M3
BOARDLOCK
-20 Cel
.092 inch
160
554954-2
TE Connectivity's 554954-2 is a telecom & datacom connector with EMI shielding, PPO insulator, and nickel finish. With 50 contacts, it supports 3.5A signal current and operates b/w -40°C to 75°C. Ideal for discrete and round cable types in telecommunications applications.
10220-0210EC
3m Electronic Products Division
10220-0210EC by 3M is a telecom/datacom connector with 0.05" pitch, 1.31" body length, and 100M ohm insulation resistance. Ideal for commercial applications, it features gold-plated contacts with nickel barrier, UL94V-0 flammability rating, and operates b/w -20°C to 85°C.
PANEL MOUNT, SHIELDED
.36 inch
.39 inch
1.31 inch
Gold (Au) - with Nickel (Ni) barrier
GLASS FILLED POLYESTER/POLYBUTYLENE TEREPHTHALATE
e4
M2.5
ZINC ALLOY
20
10114-6000EC
10114-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
3M
.323 inch
.72 inch
BERYLLIUM COPPER
GLASS FILLED POLYESTER
14
10140-6000EC
10140-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for commercial applications, this male plug connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
1.366 inch
10168-6000EC
10168-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features GOLD OVER NICKEL Termination Contact Finish and GLASS FILLED POLYESTER Insulator Material.
2.067 inch
406552-1
TE Connectivity's 406552-1 is a Telecom & Datacom Connector with a body length of 2.55 inches. It has an insulation resistance of 500000000 ohms and can withstand a voltage of 900VAC. The connector has a split board lock mounting option and a maximum operating temperature of 85°C. Its durability allows for 750 cycles of use. This connector is commonly used in telecom and datacom applications.
4 PORT, 8-POSITION EACH
.55 inch
2.55 inch
GOLD (50) OVER NICKEL
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
900VAC
32
AU-Y1006
AU-Y1006 USB connector by Assmann Wsw Components features a body length of 0.57", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this right-angle receptacle has a black insulator color, surface mount termination, and durability of 1500 cycles.
POSITIONING PIN
.271 inch
.539 inch
.57 inch
TIN OVER NICKEL
30 mohm
USB, SER A
500VAC
1500 Cycles
35
5u
10
10250-0210EC
10250-0210EC by 3M is a telecom/datacom connector with 50 contacts, gold over nickel finish, and glass-filled polyester insulator. It has a mating contact pitch of 0.05", operates b/w -20°C to 85°C, and withstands up to 700VAC. Ideal for commercial applications requiring reliable signal currents up to 1A in telecommunications and data communication systems.
2.06 inch
2041441-1
TE Connectivity 2041441-1 is a Telecom & Datacom Connector with Matte Tin finish. It uses LIQUID CRYSTAL POLYMER insulator, suitable for board mounting at temperatures from -40 to 85°C. With 20 contacts, it's ideal for telecom and datacom applications requiring 0.5A signal current rating.
.5A
.5 A
.082 inch
1.0
2041441-2
TE Connectivity's 2041441-2 is a Telecom & Datacom Connector with Matte Tin finish, Liquid Crystal Polymer insulator, and Nickel shell. It operates b/w -40 to 85°C, suitable for board mounting applications in telecom and datacom systems. Rated at 0.5A signal current, UL recognized with 20 contacts for solder termination.
.098 inch
TM5RJ2-66
Hirose Electric
The Hirose Electric TM5RJ2-66 is a telecom & datacom connector with 6 contacts, rated at 0.5A signal current. Featuring a dielectric voltage of 500VAC and insulation resistance of 100MΩ, it uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for board mounting in commercial applications requiring right-angle receptacle connectors.
.551 inch
.583 inch
GRAY
6
TM5RJ3-88
The Hirose Electric TM5RJ3-88 is a telecom & datacom connector with 8 contacts, rated at 0.5A signal current. Featuring a dielectric voltage of 500VAC and insulation resistance of 100MΩ, it uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for board mounting in commercial applications, this right-angle receptacle has a staggered PCB contact pattern and solder termination.
.732 inch
3880-B-18P
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED;
GOLD
95043-2891
Molex 95043-2891 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom/datacom applications, it has POLYCARBONATE insulator material, TIN shell finish, and UL94V-0 flammability rating.
.892 inch
.46 inch
ROUND
POLYCARBONATE
60
22 AWG
TM2REA-0606(50)
The Hirose Electric TM2REA-0606(50) is a Telecom & Datacom Connector with dimensions of 0.669" x 0.606" x 0.629". It has 6 contacts, rated for 0.5A signal current, and operates b/w -25°C to 60°C. This right-angle receptacle connector uses solder termination and is suitable for telecom and datacom applications.
.606 inch
.629 inch
.669 inch
200 mohm
200 Cycles
-25 Cel
71661-2068
The Molex 71661-2068 is a Telecom & Datacom Connector with 68 contacts, 0.05" mating pitch, and 2.092" body length. It has a dielectric voltage of 500VAC and operates b/w -40°C to 105°C. Ideal for board mounting in telecom and datacom applications due to its solder termination and staggered PCB contact pattern.
SURFACE MOUNT COMPATIBLE
.295 inch
2.092 inch
LEAF
.8896
1.905
.139
71661-2100
The Molex 71661-2100 is a Telecom & Datacom Connector with 100 contacts, 2 rows, and a mating contact pitch of 0.05". It has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and solder termination type.
2.892 inch
100
1-2040537-1
TE Connectivity's 1-2040537-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, Tin (Sn) finish, and 20u plating thickness. It has 8 contacts, UL94V-0 flammability rating, and solder termination. Ideal for board mounting in telecom and datacom applications.
20u
.059 inch
2040537-1
TE Connectivity's 2040537-1 is a telecom & datacom connector with POLYETHYLENE insulator, FLASH plating, and NICKEL shell finish. It has 8 contacts in a single row for board mounting applications. UL certified with 94V-0 flammability rating, ideal for telecommunications equipment.
FLASH
175472-4
175472-4 by Tyco Electronics Amp is a Telecom & Datacom Connector with 36 contacts. It features TIN LEAD/TIN OVER NICKEL termination, POLYAMIDE insulator, and PHOSPHOR BRONZE contact material. Ideal for board mounting applications requiring a male plug connector with RIGHT ANGLE mounting style.
GOLD (8) OVER NICKEL
TIN LEAD/TIN OVER NICKEL
POLYAMIDE
e0/e3
175472
543-8
Regal Electronics
Regal Electronics' 543-8 is a Telecom & Datacom Connector with 0.591" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and PHOSPHOR BRONZE contacts with AU ON NI finish.
.488 inch
.68 inch
.591 inch
AU ON NI
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
6u
549-6
Regal Electronics' 549-6 is a Telecom & Datacom Connector with POLYBUTYLENE TEREPHTHALATE insulator. It features 4 ports, 24 contacts, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring solder termination, this female jack connector offers reliable connectivity in telecom and datacom systems.
4 PORT, 6-POSITION EACH, 6-CONTACT EACH
563-4
Regal Electronics' 563-4 is a Telecom & Datacom Connector with 8 ports and 32 contacts. Made of POLYBUTYLENE TEREPHTHALATE, it has UL Flammability Code 94V-0. Ideal for board mounting, solder termination, and applications requiring female contact gender.
8 PORT, 6-POSITION EACH, 4-CONTACT EACH
© 2023 All rights reserved
