Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Telecom and datacom connectors are a type of connector used in telecommunications and data communications systems to connect various components and devices together. They are designed to provide reliable and secure connections that can handle high-speed data transmission and telecommunications signals.Telecom and datacom connectors come in a wide range of types and configurations, including fiber optic connectors, copper connectors, and wireless connectors. Each type of connector is designed for specific applications and requirements, such as high-speed data transmission, long-distance communication, and rugged environments.One advantage of telecom and datacom connectors is their compatibility with a wide range of devices and components, including switches, routers, servers, and other network equipment. They are also designed to provide low insertion loss and high return loss, ensuring reliable and high-quality signal transmission.Telecom and datacom connectors are commonly used in a variety of industrial, commercial, and consumer applications, including telecommunications, data centers, and wireless networks. They may be subject to rigorous testing and qualification requirements to ensure their reliability and performance.
Add filters
All
Selected
2180324-6
TE Connectivity
TE Connectivity 2180324-6 is a Telecom & Datacom Connector with 160 contacts, operating from -55 to 105°C. Featuring an empty shell and UL94V-0 flammability rating, it has a plating thickness of 29.92u. Ideal for board mounting applications in telecom and datacom systems.
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
NO
YES
115/230VAC
BOARD
ONE
8
105
-55 Cel
GENERAL PURPOSE
29.92u
UL
.07 inch
0.8
PRESS FIT
160
94V-0
8-2120875-1
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Manufacturer Series: 2120875;
2120875
10214-6212PL
3m Electronic Products Division
The 3M Electronic Products Division's 10214-6212PL is a telecom & datacom connector with glass-filled polybutylene terephthalate/polyester insulator material, nickel shell finish, and zinc alloy shell material. It has 14 contacts, UL flammability code of 94V-0, and solder termination. Ideal for board and panel mounting in applications requiring female contact gender.
RECEPTACLE
FEMALE
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER
102
STRAIGHT
BOARD AND PANEL
NICKEL
ZINC ALLOY
SOLDER
14
10220-6212PL
The 3M Electronic Products Division's 10220-6212PL is a telecom & datacom connector with glass-filled polybutylene terephthalate/polyester insulator material, nickel shell finish, and zinc alloy shell material. It features 20 contacts, solder termination, and UL flammability code of 94V-0. Ideal for board and panel mounting in telecommunications and data communication applications.
20
76866-1011
Molex
Molex 76866-1011 is a Telecom & Datacom Connector with GLASS FILLED POLYETHYLENE insulator. Features 36 contacts, UL 94V-0 flammability rating, and FEMALE contact gender. Ideal for board and panel mounting in right angle configuration for telecom and datacom applications.
GLASS FILLED POLYETHYLENE
MULTIPLE MATING PARTS AVAILABLE
RIGHT ANGLE
36
76866-1013
The Molex 76866-1013 is a telecom and datacom connector with 144 contacts. It features a glass-filled polyethylene insulator material and has a UL flammability code of 94V-0. This right-angle mounting connector is suitable for board and panel applications.
4 PORTS, 36-POSITIONS EACH
144
8492121
Wurth Elektronik
8492121 by Wurth Elektronik is a USB connector with Liquid Crystal Polymer insulator. Featuring a right-angle mounting style, it has a total of 4 contacts and operates b/w -40 to 85°C. With a durability of 1500 cycles, this connector is ideal for telecom and datacom applications.
HOLE .086-.098
.28 inch
.57 inch
.571 inch
USB CONNECTOR
RECTANGULAR
30 mohm
USB 2.0 A
1500 Cycles
BLACK
LIQUID CRYSTAL POLYMER
LOCKING
1
85
-40 Cel
POLARIZED HOUSING
1 A
BRASS
.118 inch
2
4
N10236-5212PC
N10236-5212PC by 3M Electronic Products Division is a telecom & datacom connector with 36 contacts, gold over nickel termination, and glass-filled PCT-polyester insulator. It features a zinc alloy shell, solder termination, and right-angle mounting style. Ideal for board and panel applications in telecommunications and data communication systems.
GOLD OVER NICKEL
GLASS FILLED PCT-POLYESTER
MHRJJ88NFVS
Mh Connectors
MHRJJ88NFVS by Mh Connectors is a Telecom & Datacom Connector with 8 contacts. Features include TIN over Nickel termination, Polyethylene insulator, and Brass shell material. Ideal for board mounting in telecom and datacom applications.
SHIELDED
TIN OVER NICKEL
PHOSPHOR BRONZE
POLYETHYLENE
e3
85513-5109
Molex 85513-5109 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Insulation resistance of 500MOhm and operating temperature range from -40 to +85°C make it ideal for commercial applications requiring durability up to 1250 cycles.
JACK
20 mohm
TELCOM, MODULAR
1250 Cycles
500000000 ohm
1.5 A
COMMERCIAL
Telecom and Datacom Connectors
1.27
SURFACE MOUNT
85732-1008
Molex 85732-1008 is a Telecom & Datacom Connector with 12 ports, 48+48 contacts, and POLYBUTYLENE TEREPHTHALATE insulator. Rated for 1A signal current, it has a durability of 750 cycles and operates b/w 0-70°C. Ideal for commercial telecom applications requiring reliable right-angle mounting with solder termination.
750 Cycles
POLYBUTYLENE TEREPHTHALATE
12
70
0 Cel
2.54
48+48
A20-216-661-310
Edac
Edac A20-216-661-310 is a telecom & datacom connector with 32 contacts, rated at 1.5A signal current. It offers high insulation resistance of 500MΩ and features a shell finish of TIN. Ideal for commercial applications requiring reliable right-angle mounting with locking option.
ROHS COMPLAINT
MALE
30u
TIN
COPPER ALLOY
32
10226-6212PL
10226-6212PL by 3M Electronic Products Division is a Telecom & Datacom Connector with 26 contacts, solder termination, and female contact gender. It is a board-mounted receptacle connector used in telecom and datacom applications for straight mounting style requirements.
26
ARJ12A-MASD-A-B-EMU2
Abracon
Abracon's ARJ12A-MASD-A-B-EMU2 is a Telecom & Datacom Connector with 16 contacts, featuring a Filter and Female contact gender. It is mounted on the board using solder termination, ideal for telecom and datacom applications requiring a right-angle jack design.
02 PORTS, 08 POSITIONS EACH
16
171224-1011
The Molex 171224-1011 is a Telecom & Datacom Connector with Matte Tin finish and POLYETHYLENE insulator. Featuring 40 contacts, it has a right angle mounting style for board installation. Ideal for telecom and datacom applications requiring female press fit termination.
SHIELDED, ZSFP+, POLARIZED, OTHER STACKING CONNECTOR: 20 CONTACTS
Matte Tin (Sn)
40
JD2-0010NL
Pulse Electronics
JD2-0010NL by Pulse Electronics is a telecom & datacom connector with 8 contacts, polyethylene insulator, and nickel shell finish. It features a filter, solder termination, and brass shell material. Ideal for board and panel mounting in applications requiring female contact gender and right angle mounting style.
INBUILT TRANSFORMER, SHIELDED, STANDARD: RJ45
20820010002
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
A-USBB-M5-SMD-C
Assmann Wsw Components
A-USBB-M5-SMD-C by Assmann Wsw Components is a USB connector with 5 contacts, made of glass-filled polyamide insulator and copper alloy shell. It has a tin finish, UL flammability code of 94V-0, and is designed for surface mount termination on boards. Ideal for telecom & datacom applications requiring a right-angle mounting style.
GLASS FILLED POLYAMIDE
5
74990111215A
74990111215A by Wurth Elektronik is a Telecom & Datacom Connector with 0.625" body length, 0.541" width, and 0.86" depth. Featuring POLYETHYLENE insulator material, it has 8 contacts for board mounting at 2.54mm pitch. Ideal for applications requiring right angle mounting and solder termination in telecom and datacom systems.
PEG
.541 inch
.86 inch
.625 inch
STAGGERED
.135 inch
1054431101
Molex 1054431101 USB connector features gold flash termination, liquid crystal polymer insulator, and tin shell finish. Ideal for telecom/datacom applications, with waterproof option and surface mount termination. Suitable for board mounting with stainless steel shell material.
Gold Flash (Au) - with Nickel (Ni) barrier
WATERPROOF
STAINLESS STEEL
G091231304LF
Amphenol
Amphenol G091231304LF is a telecom and datacom connector with dimensions of 0.831" x 0.185" x 0.537". It has 7 contacts, a tin termination contact finish, and a black insulator color. This plug-style connector is suitable for surface mount applications.
.185 inch
.537 inch
.831 inch
PLUG
Tin (Sn)
7
1-2201855-1
TE Connectivity 1-2201855-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, male gender, and insulation resistance of 500MΩ. Ideal for telecom and datacom applications due to its durability, polarization key feature, and copper alloy shell material.
.343 inch
1.339 inch
.457 inch
.036 inch
1.5A
CABLE
POLARIZED
24 AWG
28 AWG
7498111120R
7498111120R by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, Polyethylene insulator, and Nickel shell finish. Ideal for board mounting, this female connector features a copper alloy shell material and surface mount termination.
A00-216-260-450
A00-216-260-450 by Edac is a Telecom & Datacom Connector with 16 contacts, GOLD finish, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER insulator. It is ideal for board mounting applications requiring FEMALE contact gender and RIGHT ANGLE mounting style.
2 PORTS, 8 POSITIONS EACH
GOLD FLASH
GOLD
e4
1421128
Phoenix Contact
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Durability: 750 Cycles; Mounting Style: RIGHT ANGLE;
1.759 inch
1.492 inch
.539 inch
PLASTIC
MOUNTING FLANGE
1.75 A
CUL; UL
IDC
MUSBR-M5C1-30
Amphenol Communications Solutions
MUSBR-M5C1-30 by Amphenol is a USB connector with 24 contacts, rated at 5A signal current. It features a zinc alloy shell, matte tin finish, and polyethylene insulator for durability. Suitable for telecom & datacom applications with operating temperatures from -40 to 105°C.
.346 inch
.491 inch
.925 inch
MATTE TIN OVER NICKEL
40 mohm
USB2.0 A
#2-56 UNC
SCREW
1.325
5 A
MATTE TIN
.589 inch
1.5
24
DID-29PFFS-SL8001
TELECOM AND DATACOM CONNECTOR;
DIS-23PFFS-SL8001
74990101241
74990101241 by Wurth Elektronik is a Telecom & Datacom Connector with 0.661" body length, 0.689" width, and 0.689" depth. Featuring POLYETHYLENE insulator material, it has 8 contacts for board mounting at 2.54mm pitch. Ideal for telecom and datacom applications with UL94V-0 flammability rating and operating temperature range of -40 to 85°C.
.689 inch
.661 inch
.138 inch
74990111211
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
.549 inch
.12 inch
7499110120A
7499110120A by Wurth Elektronik is a Telecom & Datacom Connector with 0.628"x.665"x.86" dimensions, POLYETHYLENE insulator, and 15u NICKEL plating. It has 8 FEMALE contacts in a RIGHT ANGLE mounting style for board applications at -40 to 85°C. Ideal for telecom/datacom systems requiring POLARIZED HOUSING and STAGGERED PCB contact pattern.
.665 inch
.628 inch
15u
CUL, UL
.13 inch
7499410213
7499410213 by Wurth Elektronik is a Telecom & Datacom Connector with 0.63"x.541"x.86" dimensions, POLYETHYLENE insulator, and 30u NICKEL plating. It has 8 contacts, UL 94V-0 flammability code, and operates b/w -40°C to 85°C. Ideal for board mounting with PEG option in telecommunications and data communication applications.
.63 inch
RJE60-188-5401
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
SPLIT BOARD LOCK
.547 inch
.846 inch
.631 inch
1400VAC
2.03
50u
1.25 A
.1 inch
2.04
UA-20BMFA-SL8001
USB CONNECTOR;
2301994-3
TE Connectivity's 2301994-3 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and nickel shell finish. It has 8 contacts, right-angle mounting style, and solder termination. Ideal for telecom and datacom applications requiring secure board locking and polarized housing.
BOARD LOCK
.544 inch
.543 inch
.627 inch
LCP
MIXED
2301995-1
TE Connectivity 2301995-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and board lock mounting. It operates b/w -40 to 85°C, has 8 contacts, and uses solder termination. Ideal for telecom and datacom applications requiring reliable connectivity in harsh environments.
2301996-6
TE Connectivity's 2301996-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and uses solder termination for board mounting applications.
.531 inch
5-2301996-2
TE Connectivity 5-2301996-2 is a EMI shielded connector with 0.531" body depth, made of liquid crystal polymer. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for telecom & datacom applications due to its right angle mounting style and solder termination option.
5-2301996-5
TE Connectivity 5-2301996-5 is a telecom & datacom connector with EMI shielding, LCP insulator, and tin termination. It has 8 contacts, UL94V-0 flammability rating, and operates b/w -40°C to 85°C. Ideal for board mounting applications in telecommunications and data communication systems.
1.22 inch
0.1
2+2
1+1
.075 inch
5-2301996-6
TE Connectivity 5-2301996-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and is UL certified for flammability. Ideal for board mounting applications in telecommunications and data communication systems.
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
JC0-0351NL
JC0-0351NL by Pulse Electronics is a Telecom & Datacom Connector with 16 contacts, Matte Tin finish, and Polyethylene insulator. It features a Nickel shell, UL 94V-0 flammability code, and solder termination. Ideal for board and panel mounting in telecom and datacom applications.
OTHER STACKING CONNECTOR: 16 CONTACTS, 4 PORTS 8 CONTACTS EACH
Matte Tin (Sn) - with Nickel (Ni) barrier
MUSB-A111-M0
MUSB-A111-M0 by Amphenol is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm, suitable for telecom & datacom applications. With a temperature range from -40 to 105°C, it has a right-angle mounting style and solder termination for easy installation.
.709 inch
.638 inch
1.181 inch
GOLD (30) OVER NICKEL (50)
500VAC
1000000000 ohm
M3
.099 inch
JXD1-0005NL
JXD1-0005NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts, Polyamide66 insulator, and Nickel shell finish. It is a right-angle connector for board and panel mounting, suitable for applications requiring UL94V-0 flammability rating.
POLYAMIDE66
JD2-0001NL
JD2-0001NL by Pulse Electronics is a Telecom & Datacom Connector with 8 contacts, made of brass shell finish in nickel. It features insulator material polyethylene and UL flammability code 94V-0. Ideal for board and panel mounting, this connector is commonly used in telecom and datacom applications.
PULSEJACK, SHIELDED
CJ688TPBU
Panduit
The Panduit CJ688TPBU is a Telecom & Datacom Connector with dimensions of 0.63" x 0.71" x 1.43". It has 8 contacts, UL certification, and durability of 40 cycles. Ideal for commercial applications, it supports wire sizes from 24 AWG to 22 AWG and offers high insulation resistance at 500M ohm.
.71 inch
1.43 inch
40 Cycles
BLUE
22 AWG
85791-2020
Molex 85791-2020 is a TELECOM AND DATACOM CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator, rated for 1A signal current. Featuring 8 contacts, it offers durability of 750 cycles and operates b/w 0 to 70°C. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
AU
85791-3020
Molex 85791-3020 is a Telecom & Datacom Connector with PBT insulator, rated for 1A signal current. Featuring 8 contacts, it has a durability of 750 cycles and operates b/w 0°C to 70°C. Ideal for commercial applications requiring right-angle mounting and solder termination.
© 2023 All rights reserved
