Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
796055-2
TE Connectivity
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; MIL Conformity: NO;
CHAMP, PANEL MOUNTABLE, EMI SHIELDED
.269 inch
.365 inch
1.681 inch
RECEPTACLE
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
Tin/Lead (Sn/Pb)
FEMALE
RECTANGULAR
10 mohm
DUAL PRONG
NO
250VAC
.6672
500000000 ohm
BLACK
POLYETHYLENE
e0
0.031
M2X0.4
INSERT
RIGHT ANGLE
BOARD AND PANEL
4
2
85
-55 Cel
GENERAL PURPOSE
STAGGERED
1.143
30u
1.5 A
UL
COMMERCIAL
NICKEL
STEEL
D Type Connectors
.14 inch
1.6002
SOLDER
68
94V-0
.0834
5-1734324-1
TE Connectivity 5-1734324-1 is a telecom & datacom connector with EMI shielding, gold termination finish, and glass-filled polyamide46 insulator. It has 8 contacts, rated at 1A signal current, suitable for panel mounting applications. Operating temperature range from -40 to 85°C makes it reliable for commercial use.
ROHS COMPLIANT, ELV COMPLIANT
PEG
.445 inch
.638 inch
JACK
Gold (Au) - with Nickel (Ni) barrier
50 mohm
TELCOM, MODULAR
750 Cycles
YES
200000000 ohm
GLASS FILLED POLYAMIDE46
e4
1A
LOCKING
MOUNTING FLANGE
PANEL
ONE
3
1
-40 Cel
MIXED
6u
POLARIZED HOUSING
1 A
BRASS
Telecom and Datacom Connectors
.087 inch
1.02
8
5557560-1
TE Connectivity 5557560-1 is a Telecom & Datacom Connector with 8 contacts, rated for 1.5A signal current. Featuring Polyamide insulation and TIN over Nickel termination finish, it has a body size of 1.2"x0.527"x0.527". Ideal for telecom and datacom applications requiring durability up to 750 cycles at temperatures ranging from -40°C to 85°C.
2 PORTS 8 POSITION EACH
SPLIT BOARD LOCK
.527 inch
1.2 inch
TIN OVER NICKEL
30 mohm
POLYAMIDE
e3
115/230VAC
50u
5569263-1
TE Connectivity 5569263-1 is a telecom & datacom connector with EMI shielding. It has 8 contacts, insulation resistance of 500M ohm, and operates b/w -40 to 85°C. Ideal for board and panel mounting applications in telecommunications and data communication systems.
LOW PROFILE
.995 inch
3.43 inch
Tin (Sn) - with Nickel (Ni) barrier
PCT POLYESTER
TIN
COPPER ALLOY
6368062-2
TE Connectivity 6368062-2 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and TIN plating. It has 8 contacts, operates b/w -40 to 85°C, and rated for 750 cycles. Ideal for board and panel mounting in commercial applications requiring high insulation resistance.
8 PORTS 8 POSITION EACH, STACKED
.905 inch
2.355 inch
PBT-POLYESTER
.171 inch
PRESS FIT
6368062-3
TE Connectivity 6368062-3 is a telecom & datacom connector with EMI shielding, PBT-POLYESTER insulator, and tin finish. It has 8 contacts, operates b/w -40 to 85°C, and rated for 750 cycles. Ideal for telecom applications requiring high insulation resistance and durability.
5569257-1
TE Connectivity 5569257-1 is a telecom & datacom connector with EMI shielding, PCT polyester insulator, and tin finish. It has 8 contacts, rated for 1.5A signal current, suitable for board and panel mounting in commercial applications. Operating temperature range from -40 to 85°C makes it versatile for various environments.
POLARIZATION POST
2.33 inch
5787962-2
TE Connectivity 5787962-2 is a Telecom & Datacom Connector with 68+68 contacts. It features EMI shielding, polyethylene insulation, and tin contact finish. Ideal for board mounting applications in telecom and datacom systems, offering high reliability with UL certification.
OTHER STACKING CONNECTOR 68 CONTACTS
SOLDERABLE RETENTION CLIPS
.466 inch
.717 inch
PREASSEM CONN
Tin (Sn)
0.045
BOARD
TWO
4+4
5.08
CARBON STEEL
0.8
SOLDER AND SURFACE MOUNT
68+68
1827059-3
TE Connectivity's 1827059-3 is a POLYETHYLENE telecom connector with 19 contacts, rated at 0.5A. It operates b/w -25 to 70 °C and has a durability of 10000 cycles. Ideal for board mounting in telecom and datacom applications.
1 PORT, 19 POSITION EACH
10000 Cycles
.5A
70
-25 Cel
29.92u
.5 A
PHOSPHOR BRONZE
.051 inch
19
5787745-1
TE Connectivity USB connector 5787745-1 with POLYETHYLENE insulator, 8 contacts, and 1A signal current rating. Ideal for telecom/datacom applications, featuring solderable retention clips for board mounting and a durable copper alloy shell. Operating temperature range from -55 to 85°C ensures reliable performance in various environments.
.64 inch
.689 inch
.576 inch
USB CONNECTOR
NOT APPLICABLE
70 mohm
USB 2.0 A
1500 Cycles
1000000000 ohm
1+1
POLAR PIN POSITION
.112 inch
5-1903015-1
TE Connectivity 5-1903015-1 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator. Features include 19 contacts, 0.24" body width, and -25 to 70°C operating temperature range. Ideal for board mounting in commercial applications.
.24 inch
.387 inch
.637 inch
USB, SER A FLAT
10000000 ohm
GLASS FILLED LIQUID CRYSTAL POLYMER
.508
SURFACE MOUNT
5-1903015-4
TE Connectivity 5-1903015-4 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, TIN shell finish, and 19 contacts. Ideal for board and panel mounting in telecom and datacom applications.
5-1903015-5
TE Connectivity 5-1903015-5 is a Telecom & Datacom Connector with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, TIN shell finish, and 19 contacts. It is a female receptacle connector for surface mount termination on boards, UL94V-0 rated for flammability.
5084488-1
TE Connectivity's 5084488-1 is a Telecom & Datacom Connector with 80 contacts, made of Phosphor Bronze. It features Liquid Crystal Polymer insulator and Tin over Nickel termination finish. Ideal for board mounting applications in telecom and datacom systems.
PLUG
MALE
LIQUID CRYSTAL POLYMER
5084488
STRAIGHT
80
1734577-4
TE Connectivity 1734577-4 is a Telecom & Datacom Connector with EMI shielding, gold flash termination, and glass-filled polyamide46 insulator. It has 8 contacts, rated for 1A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durability and reliability in commercial settings.
SHIELDED
.657 inch
.65 inch
.636 inch
Gold Flash (Au) - with Nickel (Ni) barrier
15u
.128 inch
2007567-5
TE Connectivity's 2007567-5 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
1 PORT, 20 POSITION EACH
12
105
.118 inch
240
2007567-7
TE Connectivity's 2007567-7 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
2007567-8
TE Connectivity 2007567-8 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to UL94V-0 flammability rating and press-fit termination.
1546907-1
TE Connectivity's 1546907-1 is a Telecom & Datacom Connector with EMI shielding, Nylon66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 85°C, rated for 1.5A signal current. Ideal for cable mounting applications in telecom and datacom systems.
SOLID
NYLON66
1.5A
CABLE
5552740-1
TE Connectivity's 5552740-1 is a Telecom & Datacom Connector with 24 contacts, 0.085" mating pitch, and 105°C max operating temp. Ideal for board mounting applications in telecom and datacom systems due to its female contact gender, right angle receptacle body style, and solder termination type.
.63 inch
2.175 inch
3.5A
0.085
0.169
#4-40
SCREWLOCKS
4.2926
3.5 A
2.16
24
1674451-3
TE Connectivity's 1674451-3 is a telecom & datacom connector with POLYETHYLENE insulator, TIN shell finish, and 12 contacts. It is a FEMALE RECEPTACLE type connector for board mounting in applications requiring high UL Flammability Code of 94V-0.
1674451
216005-4
TE Connectivity 216005-4 is a Telecom & Datacom Connector with 0.866" body dimensions. It features POLYBUTYLENE TEREPHTHALATE insulator, UL 94-HB flammability rating, and 1.5A signal current. Ideal for wire and discrete cable types, it offers right-angle mounting with locking option for commercial reliability.
.866 inch
WIRE, DISCRETE
POLYBUTYLENE TEREPHTHALATE
49.21u
.01 inch
94-HB
22 AWG
26 AWG
5558343-1
TE Connectivity 5558343-1 is a Telecom & Datacom Connector with 0.695" body length, POLYAMIDE insulator, and 500M ohm insulation resistance. It has a PCB contact row spacing of 2.54mm and operates b/w -40 to 85°C. Ideal for telecom and datacom applications due to its UL-rated design and female contact gender.
.695 inch
2.54
5-6123283-5
TE Connectivity 5-6123283-5 is a Telecom & Datacom Connector with Insulation Resistance of 1MΩ, TIN OVER NICKEL Termination Contact Finish, and 0.715" Body Depth. It features LIQUID CRYSTAL POLYMER Insulator Material and LOCATING POST Board Mounting Option. Ideal for applications requiring a 40-contact MALE PLUG connector with SOLDER termination in telecom and datacom systems.
LOCATING POST
.715 inch
1000000 ohm
39.37u
1.27
40
5084487-2
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: 5084487; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
5084487
554946-1
TE Connectivity 554946-1 is a 50-contact, 2-row telecom & datacom connector with POLYPHENYLENE OXIDE insulator. It features IDC termination, 0.25" min insulation diameter, and locking mounting option. Ideal for commercial applications requiring reliable cable connections at 115/230VAC.
.25 inch
POLYPHENYLENE OXIDE
IDC
50
1-406541-7
TE Connectivity 1-406541-7 is a telecom & datacom connector with EMI shielding. It has insulation resistance of 500MΩ, rated current of 1.5A, and durability of 750 cycles. Ideal for panel mounting in applications requiring reliable signal transmission at temperatures ranging from -40 to 85°C.
.525 inch
.1 inch
1735284-4
TE Connectivity 1735284-4 is a Telecom & Datacom Connector with 0.05" mating contact pitch, 1.59" body length, and 1000000000 ohm insulation resistance. Ideal for telecom and datacom applications due to its POLYETHYLENE insulator material, Tin (Sn) - Ni termination finish, and UL Flammability Code of 94V-0.
.137 inch
.26 inch
1.59 inch
BELLOWED TYPE
500 Cycles
20.016
0.05
GUIDE PIN
POLARIZED
Headers and Edge Type Connectors
22
3.9754
1932355-1
TE Connectivity 1932355-1 is a Telecom & Datacom Connector with 0.563" body length, 0.607" width, and 0.776" depth. Featuring 100VAC dielectric voltage, it has POLYETHYLENE insulation material. Ideal for telecom applications, this connector offers 9+9 contacts in a polarized housing with AU ON NI finish.
.607 inch
.776 inch
.563 inch
AU ON NI
100VAC
100000000 ohm
CSA, UL
.091 inch
2.0066
9+9
1-1747981-6
TE Connectivity 1-1747981-6 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. It operates b/w -25 to 70°C, has TIN finish, and can endure 10000 cycles. Ideal for surface mount board applications due to its right angle receptacle design.
3.937u
.043 inch
2013595-3
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
GRAY
2040008-1
TE Connectivity's 2040008-1 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. It has 8 contacts, UL flammability rating of 94V-0, and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its polarization key and copper alloy shell material for cable mounting.
2040008-2
TE Connectivity's 2040008-2 is an EMI shielded telecom and datacom connector with a polyethylene insulator. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This plug-style connector has 8 contacts and is suitable for cable mounting applications.
8-1747981-1
TE Connectivity 8-1747981-1 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. Operating temperature ranges from -25 to 70°C, featuring a TIN shell finish. Ideal for board mounting applications requiring durable female connectors with right-angle mounting style.
1986280-1
TE Connectivity 1986280-1 is a Telecom & Datacom Connector with GLASS FILLED POLYESTER insulator. It has 8 contacts, rated at 1.5A for signal current. Suitable for panel mounting, it supports solid and stranded cable types in applications requiring a temperature range of -40 to 85°C.
SOLID, STRANDED
GLASS FILLED POLYESTER
1987236-3
TE Connectivity 1987236-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator. It has 8 contacts, rated at 0.5A for signal current. Suitable for PANEL mounting, it uses STRANDED cables and supports up to 26 AWG wire size.
STRANDED
GLASS FILLED POLYCARBONATE
1-1734035-3
TE Connectivity USB connector 1-1734035-3 with glass filled polyamide insulator, nickel shell finish, and 0.8mm terminal pitch is ideal for telecom applications. Rated at 1A signal current, it has a durability of 5000 cycles and operates b/w -40 to 85°C temperature range.
SOLDER HOLD DOWN
5000 Cycles
GLASS FILLED POLYAMIDE9T
.045 inch
5
1-1734037-4
TE Connectivity 1-1734037-4 is a Telecom & Datacom Connector with 0.05" pitch, 3.891" length, and 1000000000 ohm insulation resistance. It features a liquid crystal polymer insulator, tin contact finish, and operates b/w -55°C to 105°C. Ideal for telecom and datacom applications requiring high durability and reliability in board mounting setups.
.301 inch
.434 inch
3.891 inch
15 mohm
CENTRONIC
750VAC
.8896
1734037
FLASH
Other Rectangular Connectors
140
.139
2-1734035-1
TE Connectivity's 2-1734035-1 USB connector features GLASS FILLED POLYAMIDE9T insulator, NICKEL shell finish, and 29.92u plating thickness. With a rated current of 1A, it is ideal for telecom applications requiring board mounting with locating post option. Operating temperature ranges from -40 to 85 °C.
1-1734099-2
TE Connectivity 1-1734099-2 is a Telecom & Datacom Connector with 120 contacts, rated at 12V and 1A. Featuring a mating contact pitch of 0.05", it has an insulation resistance of 4MOhm and operates b/w -35°C to +85°C. Ideal for board mounting applications in commercial settings, this connector offers durability up to 500 cycles.
CHAMP
BOARD LOCK
.295 inch
3.391 inch
500VAC
4000000 ohm
-35 Cel
1.9685u
12 V
.122 inch
120
1-292303-4
TE Connectivity 1-292303-4 is a USB connector with insulator resistance of 1000000000 ohm. It has a body length of 0.517", width of 0.226", and depth of 0.551". Ideal for telecom & datacom applications, it features solderable retention clips for board mounting and operates b/w -55 to 85°C.
.226 inch
.551 inch
.517 inch
STAINLESS STEEL
787229-1
TE Connectivity's 787229-1 is a EMI shielded, nickel-finished telecom & datacom connector with 68 contacts. It features IDC termination, UL94V-0 flammability rating, and steel shell material. Ideal for applications requiring male plug connectors in telecom and datacom systems at 115/230VAC mains rating.
749195-2
TE Connectivity's 749195-2 is a EMI shielded connector with 68 contacts, nickel finish, and zinc alloy shell. Ideal for telecom/datacom applications, it features IDC termination, male contact gender, and UL94V-0 flammability rating.
.44 inch
#2-56 UNC
SCREW
ZINC ALLOY
1-750913-7
TE Connectivity 1-750913-7 is a Telecom & Datacom Connector with EMI Shielding, Polyester Insulator, and Tin/Lead Termination. It has 68 contacts, rated for 1A signal current, suitable for commercial applications in telecom and datacom systems. Operating temperature range from -55 to 105°C makes it versatile for various environments.
AMPLIMITE
ROUND
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
25 mohm
SQ PIN-SKT
133.44
.029 inch
POLYESTER
0.1
TIN-NICKEL
28 AWG
30 AWG
13.344
787362-9
TE Connectivity 787362-9 is a telecom & datacom connector with EMI shielding, suitable for commercial applications. It features a mating contact pitch of 0.05", body length of 3.315", and operating temperature range from -55°C to 105°C. Ideal for board mounting with solder termination, this female connector has a total of 100 contacts in a right-angle receptacle design.
.406 inch
.463 inch
3.315 inch
THREADED
1.905
.12 inch
100
2170129-1
TE Connectivity's 2170129-1 is a Telecom & Datacom Connector with EMI shielding. It features a body size of 0.642" x 0.512" x 0.941", UL 94V-0 flammability rating, and 8 contacts for signal current up to 1A. Ideal for board mounting in telecom applications requiring right-angle jack connectors with staggered PCB contact pattern.
.512 inch
.941 inch
.642 inch
0 Cel
1.969u
1.25
553443-5
TE Connectivity's 553443-5 is a Telecom & Datacom Connector with 64 contacts, 3A signal rating, and -55 to 105°C operating temperature range. It features a mating contact pitch of 0.085", polyester insulation material, and compliant boardlock mounting option. Ideal for commercial applications requiring reliable press-fit termination in telecommunications and data communication systems.
ACTION PIN; CHAMP
COMPLIANT BOARDLOCK
.595 inch
.235 inch
3.875 inch
6.5 mohm
20000000000 ohm
NATURAL
3A
0.16
MULTIPLE MATING PARTS AVAILABLE
4.064
3 A
.18 inch
64
749070-7
TE Connectivity 749070-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for telecom applications, it features a body length of 2.515", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C.
.15 inch
2.515 inch
JACKSCREW
.125 inch
© 2023 All rights reserved
