Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
2007567-5
TE Connectivity
TE Connectivity's 2007567-5 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
1 PORT, 20 POSITION EACH
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
NO
YES
LIQUID CRYSTAL POLYMER
115/230VAC
RIGHT ANGLE
BOARD
ONE
12
105
-55 Cel
GENERAL PURPOSE
UL
.118 inch
0.8
PRESS FIT
240
94V-0
2007567-7
TE Connectivity's 2007567-7 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
2007567-8
TE Connectivity 2007567-8 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to UL94V-0 flammability rating and press-fit termination.
95622-4882
Molex
The Molex 95622-4882 is a telecom and datacom connector with a body length of 0.783", width of 0.512", and depth of 0.823". It has an insulation resistance of 500MΩ, termination contact finish of matte tin over nickel, and is commonly used in board mounting applications.
SHIELDED
SPLIT BOARD LOCK
.512 inch
.823 inch
.783 inch
JACK
MATTE TIN OVER NICKEL
FEMALE
BRASS
20 mohm
TELCOM, MODULAR
500000000 ohm
BLACK
GLASS FILLED LIQUID CRYSTAL POLYMER
e3
MULTIPLE MATING PARTS AVAILABLE
LOCKING
1
85
-40 Cel
RECTANGULAR
1.5 A
COMMERCIAL
TIN
Telecom and Datacom Connectors
1.27
SURFACE MOUNT
8
1546907-1
TE Connectivity's 1546907-1 is a Telecom & Datacom Connector with EMI shielding, Nylon66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 85°C, rated for 1.5A signal current. Ideal for cable mounting applications in telecom and datacom systems.
PLUG
SOLID
MALE
NYLON66
1.5A
CABLE
5552740-1
TE Connectivity's 5552740-1 is a Telecom & Datacom Connector with 24 contacts, 0.085" mating pitch, and 105°C max operating temp. Ideal for board mounting applications in telecom and datacom systems due to its female contact gender, right angle receptacle body style, and solder termination type.
.63 inch
2.175 inch
RECEPTACLE
PREASSEM CONN
Tin (Sn)
POLYETHYLENE
3.5A
0.085
0.169
#4-40
SCREWLOCKS
2
4.2926
30u
3.5 A
D Type Connectors
2.16
SOLDER
24
MUSB-05-S-AB-SM-A-TR
Samtec
Samtec's MUSB-05-S-AB-SM-A-TR is a USB connector with 5 contacts, rated for 1A signal current. It features POLYAMIDE6T insulator material, NICKEL shell finish, and BRASS shell material. Ideal for telecom/datacom applications, it has a right-angle mounting style and surface mount termination type.
PEG
.157 inch
.374 inch
.394 inch
USB CONNECTOR
50 mohm
MINI-USB2.0 AB
1500 Cycles
POLYAMIDE6T
BOARD AND PANEL
-50 Cel
POLARIZED HOUSING
1 A
NICKEL
5
73725-1180BLF
Amphenol Communications Solutions
Amphenol's 73725-1180BLF is a telecom & datacom connector with 0.584" body width, 0.776" depth, and polyethylene insulator. Featuring TIN over nickel termination finish, it has 4 contacts for board mounting in right angle style. Ideal for commercial applications requiring UL 94V-0 flammability code compliance.
TUBE PACKAGING
.584 inch
.776 inch
TIN OVER NICKEL
STAGGERED
FLASH
COPPER ALLOY
.09 inch
2.0066
4
47151-1002
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
PANEL MOUNTABLE
SOLDER HOLDING POSTS
.243 inch
.478 inch
.591 inch
Tin/Bismuth (Sn/Bi)
30 mohm
USB, SER A FLAT
300VAC
10000 Cycles
10000000 ohm
e6
DETENT
MOUNTING FLANGE
-20 Cel
.5 A
.508
19
91487-541LF
Amphenol Icc
Amphenol Icc's 91487-541LF is a POLYAMIDE telecom connector with TIN finish. Featuring 12 contacts, it is a female crimp plug suitable for telecom and datacom applications. The UL 94V-0 rated connector has a brass shell and cable mounting type.
POLYAMIDE
91487
CRIMP
91483-041
Fci
91483-041 by Fci is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth. Featuring POLYAMIDE insulator, TIN shell finish, and 8 contacts for 3A signal current, it's ideal for telecom and datacom applications requiring crimp termination on cables.
.3 inch
1.291 inch
3 A
74233-201LF
Amphenol Icc's 74233-201LF is a Telecom & Datacom Connector with POLYETHYLENE insulator, TIN shell finish, and 8 contacts. Ideal for cable mounting, this male plug connector has a COPPER ALLOY shell and SOLDER termination. UL Flammability Code: 94V-0.
KEYED, SHIELDED
74233-300LF
Amphenol Icc's 74233-300LF is a Telecom & Datacom Connector with POLYETHYLENE insulator, TIN shell finish, and COPPER ALLOY shell material. Featuring 8 contacts, it is a male plug connector for cable mounting with solder termination. Ideal for telecom and datacom applications requiring UL Flammability Code 94V-0 compliance.
3E106-0220KV
3m Electronic Products Division
3m Electronic Products Division's 3E106-0220KV is a Telecom & Datacom Connector with 0.531" body length, 500M ohm insulation resistance, and 700VAC dielectric voltage. Ideal for board mounting with solder holding posts, this male plug connector has a total of 6 contacts and operates b/w -55 to 85°C.
LOW PROFILE, POLARIZED
.331 inch
.531 inch
GOLD (20) OVER NICKEL
700VAC
GLASS FILLED POLYESTER
20u
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
6
3E206-0100KV
3m Electronic Products Division's 3E206-0100KV is a Telecom & Datacom Connector with GOLD FLASH OVER NICKEL termination. Featuring GLASS FILLED POLYESTER insulator, it has 6 contacts and COPPER ALLOY material. Ideal for cable mounting, this FEMALE connector is solder terminated for reliable performance in various applications.
3M, POLARIZED
GOLD FLASH OVER NICKEL
e4
3E206
1674451-3
TE Connectivity's 1674451-3 is a telecom & datacom connector with POLYETHYLENE insulator, TIN shell finish, and 12 contacts. It is a FEMALE RECEPTACLE type connector for board mounting in applications requiring high UL Flammability Code of 94V-0.
1674451
216005-4
TE Connectivity 216005-4 is a Telecom & Datacom Connector with 0.866" body dimensions. It features POLYBUTYLENE TEREPHTHALATE insulator, UL 94-HB flammability rating, and 1.5A signal current. Ideal for wire and discrete cable types, it offers right-angle mounting with locking option for commercial reliability.
.866 inch
WIRE, DISCRETE
POLYBUTYLENE TEREPHTHALATE
PANEL
70
49.21u
.01 inch
1.02
94-HB
22 AWG
26 AWG
91483-021
The Fci 91483-021 is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth, made of POLYAMIDE insulator material. Featuring 8 contacts, rated at 3A signal current, it is a female crimp connector suitable for cable mounting applications in telecommunications and data communication systems.
91483-071
The Fci 91483-071 is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth, made of POLYAMIDE. Featuring 8 contacts, rated at 3A signal current, it is ideal for telecom and datacom applications requiring a polarized housing and crimp termination on cable mounting.
91483-091
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
91486-292
The Fci 91486-292 is a Telecom & Datacom Connector with dimensions of 0.705" x 0.66" x 1.267". It has 8 contacts, rated at 3A for signal current, made of POLYAMIDE insulator and TIN shell finish. This connector is ideal for applications requiring a polarized housing, female contact gender, and crimp termination on cables.
.66 inch
1.267 inch
.705 inch
91487-191
The Fci 91487-191 is a Telecom & Datacom Connector with POLYAMIDE insulator, TIN shell finish, and BRASS shell material. It has 12 contacts for FEMALE crimp termination on CABLE mounting. Ideal for telecom and datacom applications requiring reliable connectivity in a PLUG body style.
XM7A-0442-A
Omron
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Termination Type: SOLDER; Body or Shell Style: SOCKET;
SOCKET
Nickel (Ni)
TIN LEAD
5558343-1
TE Connectivity 5558343-1 is a Telecom & Datacom Connector with 0.695" body length, POLYAMIDE insulator, and 500M ohm insulation resistance. It has a PCB contact row spacing of 2.54mm and operates b/w -40 to 85°C. Ideal for telecom and datacom applications due to its UL-rated design and female contact gender.
LOW PROFILE
POLARIZATION POST
.527 inch
.695 inch
750 Cycles
2.54
50u
.14 inch
5-6123283-5
TE Connectivity 5-6123283-5 is a Telecom & Datacom Connector with Insulation Resistance of 1MΩ, TIN OVER NICKEL Termination Contact Finish, and 0.715" Body Depth. It features LIQUID CRYSTAL POLYMER Insulator Material and LOCATING POST Board Mounting Option. Ideal for applications requiring a 40-contact MALE PLUG connector with SOLDER termination in telecom and datacom systems.
LOCATING POST
.715 inch
1000000 ohm
STRAIGHT
39.37u
40
CJS5E88TGY
Panduit
Panduit's CJS5E88TGY is a Telecom & Datacom Connector with 8 contacts, ABS insulator, and tin shell finish. Ideal for cable mounting applications, this female jack connector features phosphor bronze shell material for reliable connectivity in telecommunications and data communication systems.
ACRYLONITRILE BUTADIENE STYRENE
PHOSPHOR BRONZE
CJS688TGY
The Panduit CJS688TGY is a telecom & datacom connector with 8 contacts, suitable for 26-22 AWG wires. Featuring a durable design with 40 cycles, it has an insulation resistance of 500MΩ and contact resistance of 20mΩ. Ideal for commercial applications requiring reliable right-angle board mounting connectors.
.73 inch
1.42 inch
.62 inch
40 Cycles
USB-A-S-S-B-SM2-TR
USB-A-S-S-B-SM2-TR by Samtec is a USB connector with 4 contacts, made of phosphor bronze and polybutylene terephthalate. It features front-tin and rear-nickel shell finish, UL flammability code 94V-0, and surface mount termination. Ideal for telecom & datacom applications requiring a right angle mounting style on board.
FRONT-TIN AND REAR-NICKEL
79610-102
Amphenol Icc 79610-102 is a Telecom & Datacom Connector with 20 contacts, rated at 3A signal current. It features POLYCARBONATE insulator, right-angle mounting style, and solder termination type. With a mating contact pitch of 0.1 inch, it's ideal for commercial applications requiring durable connectors with a polarization key for secure connections.
PACKAGING TRAY, OFF WHITE
.57 inch
.954 inch
1.405 inch
35 mohm
SQ PIN-SKT
1000 Cycles
WHITE
POLYCARBONATE
0.1
3
CSA, UL
Headers and Edge Type Connectors
.13 inch
20
USB-B-S-F-W-VT-R
Samtec USB-B-S-F-W-VT-R is a 4-contact USB connector with matte tin finish, white insulator, and phosphor bronze shell. It has a 1500-cycle durability and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications due to its polarized housing and UL flammability rating of 94V-0.
.433 inch
.472 inch
USB 2.0 B
3.2
2.5
USB-B-S-S-B-VT-R
Samtec USB-B-S-S-B-VT-R is a 4-contact USB connector with matte tin finish. It has a body size of 0.472" x 0.433" x 0.63" and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications, it features polarized housing, solder termination, and phosphor bronze shell material.
10079510-001TLF
The Amphenol Icc 10079510-001TLF is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with 26 contacts, UL 94V-0 flammability rating. It features a right angle mounting style for board surface mount termination. Ideal for telecom and datacom applications requiring male plug connectors.
26
10078837-001LF
10078837-001LF by Amphenol is a telecom & datacom connector with 21 contacts, nickel shell finish, and stainless steel shell material. It is a male surface mount connector for board mounting applications in telecommunications and data communication systems.
STAINLESS STEEL
21
10099099-111LF
The Amphenol Icc 10099099-111LF is a telecom/datacom connector with 0.031" mating contact pitch, 300VDC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in telecom/datacom systems, it features a male contact gender, gold mating finish over nickel, and polyethylene insulator material.
.209 inch
.303 inch
GOLD (30) OVER NICKEL (50)
Tin (Sn) - with Nickel (Ni) barrier
300VDC
100 Cycles
1000000000 ohm
0.031
8.2042
.7874
554946-1
TE Connectivity 554946-1 is a 50-contact, 2-row telecom & datacom connector with POLYPHENYLENE OXIDE insulator. It features IDC termination, 0.25" min insulation diameter, and locking mounting option. Ideal for commercial applications requiring reliable cable connections at 115/230VAC.
.25 inch
POLYPHENYLENE OXIDE
IDC
50
87520-4010ALF
87520-4010ALF by Amphenol is a USB connector with 0.571" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features POLYAMIDE46 insulator material, SPLIT BOARD LOCK mounting option, and MATTE TIN termination finish.
.28 inch
.551 inch
.571 inch
USB 2.0 A
750VAC
35.1392
POLYAMIDE46
TIN/NICKEL
.11 inch
10.2304
GSGX-NS2-8850
Kycon
Kycon's GSGX-NS2-8850 is a 16-contact telecom & datacom connector with 1.2" length, 0.512" width, and 0.81" depth. It offers 500000000 ohm insulation resistance, 1400VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for commercial applications requiring durable connectors with solder termination and nickel finish.
2 PORTS 8 POSITION EACH, SHIELDED
.81 inch
1.2 inch
1400VAC
500 Cycles
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
.126 inch
16
M702-230642
Harwin PLC
The Harwin PLC M702-230642 is a telecom and datacom connector with a body length of 0.516", body width of 0.315", and body depth of 0.567". It is used for board mounting with a surface mount termination type, and has an insulation resistance of 100000000 ohm.
ROHS COMPLIANT
SOLDER HOLDING FLANGE
.315 inch
.567 inch
.516 inch
GOLD
MATTE TIN
100000000 ohm
GLASS FILLED POLYAMIDE9T
.9906
57489-1010BLF
The Fci 57489-1010BLF is a Telecom & Datacom Connector with 9 contacts. It features TIN over Nickel termination, Polyamide46 insulator, and Gold over Nickel mating contact finish. Ideal for board mounting applications in telecom and datacom systems due to its right angle mounting style.
TIN (100) OVER NICKEL (50)
57489
9
57489-1020BLF
57489-1020BLF by Fci is a Telecom & Datacom Connector with 9 contacts. It features TIN over Nickel termination, Polyamide46 insulator, and Gold over Nickel mating contact finish. Ideal for board mounting applications in telecom and datacom systems due to its right angle mounting style.
GLX-N-44-50
Kycon GLX-N-44-50 is a telecom & datacom connector with gold-plated phosphor bronze contacts. It offers 500M ohm insulation resistance, 1400VAC dielectric voltage, and 1.5A signal current rating. Ideal for board mounting in telecommunications and data communication applications.
.48 inch
GOLD (50)
Gold (Au)
GRAY
POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
.138 inch
2.032
GLX-N-44-BLK
GLX-N-44-BLK by Kycon is a telecom & datacom connector with 4 contacts, gold flash finish, and 1400VAC dielectric voltage. It features a 0.567" body width, 0.591" depth, and 0.48" length. Ideal for board mounting in applications requiring high insulation resistance and low contact resistance.
GOLD FLASH
Gold Flash (Au)
GLX-N-44M-50
GLX-N-44M-50 by Kycon is a telecom & datacom connector with 4 contacts, gold-plated phosphor bronze material, and 500000000 ohm insulation resistance. It has a body length of 0.59", width of 0.57", and depth of 0.512". Ideal for board mounting applications requiring a right angle jack with solder termination.
.59 inch
1000VAC
.128 inch
GLX-N-44M-BLK
GLX-N-44M-BLK by Kycon is a telecom & datacom connector with 4 contacts, gold flash finish, and 1000VAC dielectric voltage. It has a 0.59" body length, 0.57" width, and 0.512" depth. Ideal for board mounting applications in telecommunications and data communication systems.
GLX-N-44
Kycon's GLX-N-44 is a 4-contact telecom & datacom connector with 1400VAC dielectric voltage. Featuring 0.567" width, 0.591" depth, and 0.48" length, it uses POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE insulation for 500000000 ohm resistance. Ideal for board mounting with solder termination, this UL-certified connector has a flash plating thickness and is designed for right-angle mounting in commercial applications.
FCS8-10-01-L-S-A-TR
Samtec's FCS8-10-01-L-S-A-TR is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator, Nickel shell finish, and Phosphor Bronze shell material. It has 10 contacts for cable mounting and female contact gender. Ideal for telecom and datacom applications requiring surface mount termination in straight mounting style.
ACCELERATE
10
USB-B-S-F-W-SM-TR
Samtec's USB-B-S-F-W-SM-TR is a right angle USB connector with 4 contacts, suitable for telecom/datacom applications. Made of high temp thermoplastic, it offers durability of 1500 cycles and operates b/w -50°C to 85°C. With a flash plating thickness and nickel shell finish, this female connector has a rectangular PCB contact pattern for surface mount termination.
.429 inch
USB B
HIGH TEMPERATURE THERMOPLASTIC
1-406541-7
TE Connectivity 1-406541-7 is a telecom & datacom connector with EMI shielding. It has insulation resistance of 500MΩ, rated current of 1.5A, and durability of 750 cycles. Ideal for panel mounting in applications requiring reliable signal transmission at temperatures ranging from -40 to 85°C.
.525 inch
.64 inch
10 mohm
15u
.1 inch
© 2023 All rights reserved
