Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
10132449-2421GLF
Amphenol Communications Solutions
Amphenol's 10132449-2421GLF is a power connector with 24 contacts, copper alloy material, and polyamide insulator. It has a temperature range of -40 to 105°C, UL flammability rating of 94V-0, and solder termination for board mounting. Ideal for commercial applications requiring reliable male connectors with square pin sockets.
RATED CURRENT(POWER):9A
.343 inch
.39 inch
1.561 inch
POWER CONNECTOR
SN ON NI
TIN
MALE
COPPER ALLOY
SQ PIN-SKT
NO
POLYAMIDE
e3
BOARD
105
-40 Cel
GENERAL PURPOSE
UL
COMMERCIAL
Headers and Edge Type Connectors
SOLDER
24
94V-0
UPT-08-01-01-L-RA
Samtec
Samtec's UPT-08-01-01-L-RA is a power connector with 8 contacts, featuring Matte Tin over Nickel finish. Its Liquid Crystal Polymer insulator material ensures durability. Ideal for board mounting applications, this male connector is solder terminated and commonly used in power systems.
POWER STRIP10
NOT SPECIFIED
MATTE TIN OVER NICKEL
LIQUID CRYSTAL POLYMER
MULTIPLE MATING PARTS AVAILABLE
8
IMS5-02-02
Samtec IMS5-02-02 is a power connector with dimensions 1.184" x 0.4" x 0.89". It has 2 contacts, female gender, and blade pin-skt style. Suitable for cable mounting with crimp termination, made of POLYAMIDE insulator material.
.4 inch
.89 inch
1.184 inch
FEMALE
BLADE PIN-SKT
YES
CABLE
CRIMP
2
IPT1-115-01-L-D-VS-A
Samtec's IPT1-115-01-L-D-VS-A is a POWER CONNECTOR with 30 SQ PIN-SKT contacts. It has dimensions of 1.52" x 0.2" x 0.3" and operates b/w -55°C to 125°C. Ideal for board mounting applications, it features Tin (Sn) finish with Nickel (Ni) barrier for reliable performance.
.2 inch
.3 inch
1.52 inch
Tin (Sn) - with Nickel (Ni) barrier
125
-55 Cel
SURFACE MOUNT
30
IPL1-106-01-S-S-RA-K
The Samtec IPL1-106-01-S-S-RA-K is a power connector with 6 contacts, right angle mounting style, and liquid crystal polymer insulator. It has a body size of 0.6" x 0.24" x 0.32" and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring male contact gender with solder termination.
.24 inch
.32 inch
.6 inch
RIGHT ANGLE
1
2.54
6
IPBT-103-H1-T-D-RA-GP
IPBT-103-H1-T-D-RA-GP by Samtec is a power connector with 6 contacts, made of copper alloy. It has a body length of 1.042" and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its right angle receptacle design and solder termination.
POLARIZED, SHROUDED
.682 inch
1.042 inch
RECEPTACLE
S0P6
MATTE TIN OVER NICKEL (50)
TIN OVER NICKEL
BLACK
LOCKING
FRICTION LOCK
ONE
CSA, UL
.147 inch
IPBT-104-H2-T-D-K
Samtec's IPBT-104-H2-T-D-K is a Power Connector with Liquid Crystal Polymer insulator. It has 8 contacts, Matte Tin finish, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring surface mount board mounting with straight male contact style.
.424 inch
.713 inch
S0P8
Matte Tin (Sn) - with Nickel (Ni) barrier
STRAIGHT
IPBT-110-H1-T-D-RA-K
Samtec's IPBT-110-H1-T-D-RA-K is a power connector with 20 contacts. It features Tin (Sn) finish with Nickel (Ni) barrier, Liquid Crystal Polymer insulator, and Copper Alloy contacts. Ideal for board mounting applications requiring male contact gender and solder termination.
20
IPBT-115-H1-T-D-RA-K
Samtec's IPBT-115-H1-T-D-RA-K is a power connector with 30 contacts, made of copper alloy. It features liquid crystal polymer insulator and matte tin over nickel finish. Ideal for board mounting applications requiring male contact gender.
428196222
Molex
Molex 428196222 Power Connector features 0.394" mating contact pitch, 2.512" body length, and 1000000000 ohm insulation resistance. Ideal for board mounting with solderable retention clips, it offers a rated current of 50A and operates b/w -40 to 105°C.
SOLDERABLE RETENTION CLIPS
.555 inch
.827 inch
2.512 inch
BRIGHT TIN OVER NICKEL
RECTANGULAR
1.5 mohm
2200VAC
10 Cycles
1000000000 ohm
GLASS FILLED POLYAMIDE46
0.394
POLARIZED LCK
4.3942
100u
POLARIZED HOUSING
50 A
.201 inch
5.08
926309-1
TE Connectivity
TE Connectivity's 926309-1 Power Connector features panel mount design, 0.275"x.299"x1.079" dimensions, and Polyamide66 insulator for -55 to 105°C applications. With UL94V-2 flammability rating, it has 10 contacts in a single connector suitable for power applications requiring crimp termination and rectangular contact pattern.
.299 inch
1.079 inch
.275 inch
NOT APPLICABLE
RND PIN-SKT
NATURAL
POLYAMIDE66
PANEL
CSA, UL, V
6.35
10
94V-2
926309-3
TE Connectivity's 926309-3 Power Connector features POLYAMIDE66 insulator, UL94V-0 flammability rating, and 105°C max operating temp. Ideal for applications requiring a panel-mounted male connector with crimp termination, such as power distribution systems.
115/230VAC
926302-3
TE Connectivity's 926302-3 Power Connector features POLYAMIDE66 insulator, UL94V-0 flammability rating, and 105°C max operating temp. Ideal for panel mounting applications with 10 contacts, this plug connector is designed for crimp termination in power systems rated up to 115/230VAC.
1.07 inch
2.909 inch
PLUG
UL, VDE
350711-1
TE Connectivity's 350711-1 Power Connector features 0.8" body length, 0.55" width, and 100000000 ohm insulation resistance. Ideal for board mounting applications with POLYAMIDE insulator material and rated current of 12A. Operating temperatures range from -40 to 105 °C, meeting UL, CSA, V standards.
MATE-N-LOK
.55 inch
.58 inch
.8 inch
Tin (Sn)
3.5 mohm
50 Cycles
22.24
100000000 ohm
0.25
350715-1
DETENT
200u
POLARIZED
12 A
.122 inch
3.1136
350848-4
The TE Connectivity 350848-4 is a power connector with POLYAMIDE insulator, operating from -55 to 105°C. It has 4 contacts, rated at 5A, suitable for cables with wire sizes ranging from 30 to 10 AWG. This female plug connector is UL94V-0 compliant and commonly used in power applications requiring a crimp termination method.
5A
5 A
4
10 AWG
30 AWG
643412-1
TE Connectivity 643412-1 is a Power Connector with 0.55"x.3"x.3" dimensions, Tin termination finish, and POLYAMIDE insulator material. Rated for 12A signal current, it's used in board mounting applications with a terminal pitch of 6.35mm and solder termination type.
WHITE
12A
770017-1
.149 inch
IPS1-110-01-L-D-RA
Samtec IPS1-110-01-L-D-RA is a power connector with 20 contacts, rated at 2.3A signal current. It features liquid crystal polymer insulator, tin termination finish, and gold mating contact finish. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
MINI MATE; TIGER BUY, SHROUDED
S0P20
GOLD (10) OVER NICKEL (50)
PHOSPHOR BRONZE
1.668
10u
2.3 A
.1 inch
1.39
IPS1-125-01-L-D-RA
Samtec IPS1-125-01-L-D-RA is a power connector with 50 contacts, rated at 2.3A signal current. It features gold mating contact finish over nickel, liquid crystal polymer insulator material, and tin termination with nickel barrier. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55°C to 105°C.
S0P50
50
VLP-01V
J S T Mfg
VLP-01V by J S T Mfg is a POWER CONNECTOR with POLYAMIDE66 insulator material. It features CRIMP termination, 94V-0 UL Flammability Code, and MALE contact gender. Ideal for CABLE AND PANEL mounting applications in various industries.
COMPATIBLE CONTACTS: SVM-42T-P2.0; SVM-61T-P2.0; SVM-81T-P2.0
CABLE AND PANEL
VLR-04VN
VLR-04VN by J S T Mfg is a POWER CONNECTOR with POLYAMIDE66 insulator material. It features 4 contacts, CRIMP termination, and FEMALE contact gender. Ideal for applications requiring reliable power connections in various industries.
COMPATIBLE CONTACTS: SVF-42T-P2.0; SVF-61T-P2.0; SVF-81T-P2.0
350587-1
The TE Connectivity 350587-1 Power Connector features a body size of 1.05" x 0.8" x 0.58", with Tin termination finish. With 12A signal current rating, it is ideal for board mounting applications at temperatures ranging from -40 to 105°C. This male connector has a rectangular contact pattern and is UL and VDE compliant.
RATED CURRENT(POWER):12A
1.05 inch
3
.12 inch
12
770875-1
TE Connectivity 770875-1 is a Power Connector with rated voltage of 600V and current of 9.5A. Featuring POLYAMIDE insulator, it has tin/lead termination finish for soldering applications. Ideal for board mounting with straight plug style, this connector is suitable for various power transmission systems.
BOARD LOCK
.387 inch
.531 inch
Tin/Lead (Sn/Pb)
e0
9.5A
0.162
250u
9.5 A
600 V
.167 inch
4.14
1-172171-6
1-172171-6 by TE Connectivity is a POWER CONNECTOR with 15 contacts, rated at 600V. It has POLYAMIDE66 insulator material and operates b/w -20 to 105°C. Used in applications requiring a compact connector with high voltage capabilities.
MATE-N-LOK, COMPATIBLE CONTACTS: 170359; 170360; 170361; 170362
.63 inch
.933 inch
.882 inch
BLUE
0.163
-20 Cel
15
1-794072-0
TE Connectivity 1-794072-0 is a power connector with 24 contacts, rated at 600V and 9.5A. Featuring matte tin finish, it has a body size of 2.01" x 0.387" x 0.531". Ideal for board mounting applications with operating temperatures from -55 to 105°C.
2.01 inch
350u
.145 inch
16 AWG
FWJ-02-01-T-S
Samtec FWJ-02-01-T-S is a power connector with Matte Tin finish, suitable for commercial use. With 2 contacts, it has a rated current of 11.2A and operates b/w -55 to 105°C. Ideal for board mounting applications due to its compact dimensions of 0.312" x 0.25" x 0.125".
.25 inch
.125 inch
.312 inch
POLYBUTYLENE TEREPHTHALATE
11.2 A
FWJ-03-01-T-S
Samtec FWJ-03-01-T-S is a POWER CONNECTOR with 3 SQ PIN-SKT contacts. It has a body size of 0.468" x 0.25" x 0.125". Operating temp range from -55 to 105°C, UL94V-0 rated. Ideal for commercial applications requiring 10.3A signal current capacity on board mounting with solder termination.
.468 inch
10.3 A
FWJ-03-04-T-S-RA
Samtec's FWJ-03-04-T-S-RA is a POWER CONNECTOR with Matte Tin (Sn) finish, suitable for commercial applications. With 3 SQ PIN-SKT contacts, it operates b/w -55 to 105°C and supports up to 10.3A signal current on a board mount setup.
FWJ-03-04-T-S
Samtec's FWJ-03-04-T-S power connector features matte tin finish, 10.3A signal current rating, and polybutylene terephthalate insulator. With a compact size of 0.468" x 0.25" x 0.125", it is ideal for board mounting applications in commercial settings with operating temperatures ranging from -55°C to 105°C.
FWJ-04-01-T-S
Samtec FWJ-04-01-T-S is a POWER CONNECTOR with 4 contacts, rated at 9.2A. It has Matte Tin (Sn) finish and Polybutylene Terephthalate insulator material. Ideal for commercial applications, it operates b/w -55 to 105°C on boards with solder termination.
.624 inch
9.2 A
FWJ-10-01-T-S
Samtec FWJ-10-01-T-S is a POWER CONNECTOR with 10 SQ PIN-SKT contacts. It features Matte Tin (Sn) finish, POLYBUTYLENE TEREPHTHALATE insulator, and -55 to 105°C operating range. Ideal for commercial applications requiring reliable signal transmission up to 6.7A on boards with UL certification.
1.56 inch
6.7 A
FWJ-13-01-T-S
Samtec FWJ-13-01-T-S is a power connector with 13 contacts, rated at 6.7A signal current. It features matte tin finish over nickel, phosphor bronze contact material, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
2.028 inch
13
FWJ-20-01-T-S
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: NO; Contact Style: SQ PIN-SKT;
3.12 inch
FWJ-01-03-T-S
The Samtec FWJ-01-03-T-S power connector features a body size of 0.156" x 0.25" x 0.125", with Matte Tin (Sn) termination. With a rated current of 13.1A, it is ideal for board mounting applications in a temperature range from -55°C to 105°C. This UL-certified connector uses Phosphor Bronze contacts and Polybutylene Terephthalate insulator material.
.156 inch
13.1 A
10052620-5545P00LF
Amphenol Icc
The Amphenol Icc 10052620-5545P00LF is a Power Connector with 4 contacts, POLYETHYLENE insulator, and Tin (Sn) termination. It has a Dielectric Withstanding Voltage of 1500VAC and operates b/w -65 to 105 °C. Ideal for board mounting applications requiring high insulation resistance and UL certification.
ROHS COMPLIANT & POS. 3 LONG
PEG
.543 inch
1.154 inch
.467 inch
S0P4
1 mohm
1500VAC
8.0064
10000000000 ohm
POLYETHYLENE
-65 Cel
30u
.118 inch
PRESS FIT
IPBT-110-H1-T-D-RA-GP
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: COPPER ALLOY;
2.133 inch
GUIDE SLOT
M80-5000000M5-06-333-00-000
Harwin PLC
The Harwin PLC M80-5000000M5-06-333-00-000 is a power connector with 6 contacts, gold termination finish, and glass-filled polyphenylene sulfide insulator. It has a temperature range of -55 to 125°C and UL flammability rating. Ideal for commercial applications requiring reliable board-mounted solder connections.
RATED CURRENT(POWER):20A
.238 inch
.339 inch
1.339 inch
Gold (Au)
GLASS FILLED POLYPHENYLENE SULFIDE
e4
10127819-04121LF
Amphenol's 10127819-04121LF power connector features gold flash termination, nylon66 insulator, and brass contact material. With a dielectric voltage of 1500VAC, it is ideal for commercial applications requiring a durable plug with right-angle mounting on boards.
.451 inch
.764 inch
.378 inch
AU
GOLD FLASH
BRASS
10 mohm
30 Cycles
14.6784
NYLON66
FLASH
CUL, UL
.138 inch
IPL1-103-01-F-S-RA-K
The Samtec IPL1-103-01-F-S-RA-K is a power connector with dimensions of 0.3" x 0.24" x 0.32". It features phosphor bronze contacts with gold flash finish, suitable for board mounting applications. With an operating temperature range from -55°C to 125°C, it is ideal for high-performance electronic devices.
IPL1-105-01-F-S-RA-K
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Body Length: .5 inch; Total No. of Contacts: 5;
.5 inch
5
IPL1-109-01-L-S-RA-K
Samtec IPL1-109-01-L-S-RA-K is a 9-contact power connector with 0.9"x.24"x.32" dimensions, suitable for board mounting applications. It features tin contact finish with nickel barrier, phosphor bronze contacts, and liquid crystal polymer insulator material. Operating temperature range from -55°C to 125°C makes it ideal for various electronic devices.
.9 inch
GOLD
9
10127721-122LF
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: GOLD;
RATED CURRENT(POWER):8.5A
.341 inch
.433 inch
.85 inch
S0P12
20 mohm
.126 inch
2.0016
B2P-VH-B(LF)(SN)
B2P-VH-B(LF)(SN) by J S T Mfg is a POWER CONNECTOR with dimensions of 0.309" x 0.335" x 0.429". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, BRASS contacts, and operates b/w -25°C to 85°C. Ideal for BOARD mounting applications requiring a reliable male SQ PIN-SKT contact style.
Rated Current (Power) (A): 10A
.335 inch
.429 inch
.309 inch
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
85
-25 Cel
CSA; TUV
1586611-1
TE Connectivity's 1586611-1 is a POWER CONNECTOR with 0.551" body length and 0.467" width made of POLYAMIDE. It has 6 contacts, UL 94V-0 flammability rating, and solder termination. Ideal for board mounting applications, mating with 1586618-1 connector in various power systems.
POLARISED
.551 inch
1586618-1
IPBD-06-D
The Samtec IPBD-06-D is a power connector with 12 contacts, TIN over nickel finish, and polybutylene terephthalate insulator. It has a temperature range of -40 to 105°C and is UL certified. Ideal for commercial applications requiring reliable power connections in straight cable mounting configurations.
SHROUDED
.478 inch
1.03 inch
TIN OVER NICKEL (50)
0 inch
IPBD-10-D
The Samtec IPBD-10-D is a power connector with 20 contacts, TIN over nickel finish, and PBT insulator. It operates b/w -40°C to 105°C, suitable for commercial applications requiring a straight plug with crimp termination on cables. The UL-certified connector has a body length of 1.69" and width of 0.478", ideal for power transmission systems.
POWER MATE
1.69 inch
IPBD-15-D
The Samtec IPBD-15-D is a power connector with 30 contacts, TIN over nickel finish, and PBT insulator. It has a temperature range of -40 to 105°C and UL certification. Ideal for commercial applications requiring reliable power connections in cable assemblies.
2.515 inch
S0P30
IPBT-108-H1-T-D-GP
The Samtec IPBT-108-H1-T-D-GP is a power connector with 16 contacts, liquid crystal polymer insulator, and copper alloy contact material. It has a temperature range of -55 to 105°C and matte tin over nickel finish. Ideal for commercial applications requiring reliable board-mounted male connectors with straight plug style.
POWER-MATE, LATCHED, POLARIZED, SHROUDED
1.373 inch
S0P16
.13 inch
16
5-794638-2
TE Connectivity 5-794638-2 Power Connector features 0.118" contact pitch, 100M ohm insulation resistance, and 250V rated voltage. Ideal for board mounting applications with POLYAMIDE insulator material and UL94V-0 flammability rating.
POLARIZATION
.27 inch
.364 inch
1.456 inch
150 Cycles
0.118
2-794617-2
9.398
250 V
.14 inch
22
20 AWG
.6672
© 2023 All rights reserved
