Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
829558-2
TE Connectivity
TE Connectivity's 829558-2 RF MCX Connector has a characteristic impedance of 50 ohm, with a max operating frequency of 6 GHz. Featuring a gold shell finish and PTFE insulator material, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -65 to 125 °C.
.393 inch
.197 inch
.394 inch
JACK
50 ohm
RF MCX CONNECTOR
NOT SPECIFIED
FEMALE
COAX
SNAP
NO
PTFE
e4
LOCKING
STRAIGHT
BOARD
ONE
1
6 GHz
125
-65 Cel
GENERAL PURPOSE
COMMERCIAL
GOLD
COPPER-ZINC ALLOY
RF MCX/MMCX Connectors
.159 inch
SOLDER
1.35
R113665000
Radiall S A
The Radiall S A R113665000 is a RF MCX connector with 50 ohm impedance, gold termination finish, and snap coupling. Ideal for board and panel mounting applications up to 6 GHz frequency. Features female contact gender and right angle mounting style for versatile connectivity solutions.
CAPTIVE CENTER CONTACT
RECEPTACLE
Gold (Au)
POLYTETRAFLUOROETHYLENE
RIGHT ANGLE
BOARD AND PANEL
YES
R113182000
Radiall S A R113182000 RF MCX Connector features 50 ohm impedance, 1.1 VSWR, and operates up to 6 GHz. With gold-plated contacts and PTFE insulator, it is ideal for high-frequency cable connections in various applications.
APPILICABLE CABLES: RG 174; RG 316, CAPTIVATED CENTER CONTACT
PLUG
Gold (Au) - with Nickel (Ni) barrier
MALE
MULTIPLE MATING PARTS AVAILABLE
CABLE
CRIMP
1.1
R113240000
The Radiall S A R113240000 RF MCX Connector has a 50 ohm impedance, gold termination finish, and operates up to 6 GHz. Ideal for panel mounting, this connector is commonly used in applications requiring high-frequency signal transmission with low voltage standing wave ratio.
APPLICABLE CABLE: RG 174; RG 316, CAPTIVE CENTER CONTACT
CABLE AND PANEL
1.12
R113082000
R113082000 by Radiall S A is a RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and features a gold (Au) termination contact finish with nickel (Ni) barrier. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.
R213082007
Radiall S A's R213082007 is a RF MCX connector with SNAP coupling type, suitable for 75 ohm cables. It has a max operating frequency of 6 GHz and a voltage standing wave ratio of 1.12. This connector is commonly used in telecommunications and high-frequency applications.
APPILICABLE CABLE: RG 179, CAPTIVATED CENTER CONTACT
75 ohm
NOT APPLICABLE
R213665000
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 6 GHz; Termination Contact Finish: GOLD; Filter Feature: NO;
82_MCX-S50-0-29/111_NE
Huber+suhner Ag
82_MCX-S50-0-29/111_NE by Huber+suhner Ag is a RF MCX CONNECTOR with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. Featuring a durable design with gold mating contact finish over nickel, it is ideal for commercial use in board mounting configurations. The connector offers a snap coupling type and surface mount termination, ensuring reliable performance in various electronic systems.
STANDARD: IEC 60169-36
.24 inch
.236 inch
GOLD (51) OVER NICKEL (51)
BERYLLIUM COPPER
500 Cycles
PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE
155
-55 Cel
BRASS
SURFACE MOUNT
919-107J-51SX
Amphenol
Amphenol's 919-107J-51SX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications requiring a reliable connection with gold termination finish and snap coupling type. Compatible with RG-174 cable types for straight mounting on female jack connectors.
APPLICABLE CABLES: RG 174/U; RG 188A/U; RG 316/U, VSWR MAX AT 2.5 GHZ, INSERTION LOSS MAX AT 1 GHZ
RG-174
.1 dB
MCX
1.06
919-101P-51S1X
Amphenol's 919-101P-51S1X MCX connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. Ideal for RF applications up to 6 GHz with RG-174 cable types, this male plug connector offers a 50 ohm impedance and PTFE insulator material.
908-22101
Amphenol 908-22101 RF MMCX Connector features 50 ohm impedance, 700VAC dielectric voltage, and 6 GHz operating frequency. Ideal for commercial applications requiring high durability with a min temperature of -55°C and max of 155°C. Suitable for board mounting with liquid crystal polymer insulator material.
MICROMATE
.17 inch
.142 inch
RF MMCX CONNECTOR
10 mohm
700VAC
15.1232
500000000 ohm
LIQUID CRYSTAL POLYMER
GUIDE PIN
1.4
6.2272
908-43300
Amphenol 908-43300 is an RF MMCX connector with 50 ohm impedance, gold finish, and 700VAC dielectric voltage. Ideal for RG-316 cables, it operates b/w -55 to 155°C, withstands 500 cycles, and has a max frequency of 6 GHz. Suitable for commercial applications requiring high durability and low contact resistance.
MICROMATE, APPLICABLE CABLES: RG 174; RG 188A; RG 316
.276 inch
RG-316
PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE
Other RF Connectors
CRIMP SOLDER
82_MMCX-50-0-8/111_OE
82_MMCX-50-0-8/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features gold (Au) termination contact finish, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, and operates up to 6 GHz. Ideal for commercial applications requiring durable connectors with surface mount termination.
.157 inch
.209 inch
GOLD (51) OVER NICKEL
5.7824
262102
Amphenol 262102 is an RF MMCX connector with 0.276" body depth, gold shell finish, and PTFE insulator. It is a right-angle plug for cable termination in MCX/MMCX applications. Suitable for commercial use, offering reliable coaxial connections.
APPLICABLE CABLES: RG-178B/U; RG-196A/U
NATURAL
262103
Amphenol 262103 is an RF MMCX connector with gold contact finish, brass material, and PTFE insulator. It features snap coupling for cable termination in male gender plug style. Ideal for right-angle mounting applications in MCX & MMCX connectors category.
APPLICABLE CABLES: RG-174/U; RG-188A/U; RG-316/U
262118
Amphenol 262118 is an RF MMCX connector with SNAP coupling, PTFE insulator, and FEMALE contact gender. It is used in MCX & MMCX applications for cable mounting with crimp termination. Ideal for straight jack mounting style setups.
82_MCX-50-0-19/111_NH-1
82_MCX-50-0-19/111_NH-1 by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring a durable brass shell and PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE insulator, it offers reliable performance in temperatures ranging from -55 to 155 °C. With a SNAP coupling type and FEMALE contact gender, this connector is designed for BOARD mounting with STRAIGHT orientation.
.252 inch
24.9088
.118 inch
MCX7-J-P-H-RA-TH1
Samtec
Samtec's MCX7-J-P-H-RA-TH1 RF MCX Connector features gold termination, 75 ohm impedance, and 6 GHz frequency. Ideal for board mounting in applications requiring a snap coupling type, such as high-frequency signal transmission.
GOLD (30)
1.3
MCX7-P-C-H-ST-CA3
Samtec's MCX7-P-C-H-ST-CA3 is a RF MCX connector with 75 ohm impedance, gold finish, and snap coupling. Ideal for applications requiring a max frequency of 6 GHz, this male plug connector is designed for cable mounting using crimp solder termination.
APPLICABLE CABLE: RG 179
16_MMCX-50-1-12/111_OE
16_MMCX-50-1-12/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. It features gold (Au) termination contact finish with nickel (Ni) barrier and operates in temperatures ranging from -55°C to 155°C. Ideal for commercial use, this male plug connector has a right-angle mounting style and solder termination type.
.169 inch
.138 inch
GOLD OVER NICKEL
.101 inch
1-1337586-0
TE Connectivity's 1-1337586-0 RF MCX Connector features 0.177" body diameter, 0.1 dB insertion loss, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring a durable, polarized housing with a max operating frequency of 6 GHz.
.177 inch
5 mohm
1000000000 ohm
165
POLARIZED HOUSING
1-1634002-0
TE Connectivity 1-1634002-0 is an RF MMCX connector with gold finish, suitable for RG-174 cable termination. Featuring a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 155°C.
APPLICABLE CABLE: RG 174
115/230VAC
16_MMCX-50-2-2/111_OE
16_MMCX-50-2-2/111_OE by Huber+suhner Ag is a RF MMCX connector with gold finish, suitable for cables like G_02232_D. It has a characteristic impedance of 50 ohm, operates from -55 to 155 °C, and can handle frequencies up to 6 GHz. Ideal for applications requiring durable male connectors with right-angle mounting in high-frequency environments.
G_02232_D
82_MMCX-S50-0-2/111_KE
Huber+suhner Ag's 82_MMCX-S50-0-2/111_KE is a RF MMCX connector with gold finish, suitable for board mounting. With 50 ohm impedance and 6 GHz frequency, it offers durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle coax connections.
SINGLE PACKAGING
.175 inch
82_MMCX-S50-0-2/111_KH
82_MMCX-S50-0-2/111_KH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features a snap coupling type, gold shell finish, and can operate b/w -55 to 155 °C. Ideal for board mounting applications, this female jack connector offers durability up to 500 cycles and supports frequencies up to 6 GHz.
BULK PACKAGING
85_MMCX-50-0-1/111_OE
85_MMCX-50-0-1/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. Featuring gold-plated beryllium copper contacts and a durable design rated for 500 cycles, it is commonly used in commercial settings for board mounting due to its right angle jack style.
.15 inch
.256 inch
.136 inch
1-1634010-0
TE Connectivity 1-1634010-0 is an RF MMCX connector with characteristic impedance of 50 ohm, operating frequency up to 6 GHz. Featuring PTFE insulation material, it has a durability of 500 cycles and operates in temperatures ranging from -55 to 155 °C. Ideal for board mounting applications requiring high-quality female coax connectors.
.14 inch
18
6
MCX7-J-P-HN-RA-TH1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 6 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE; IEC Conformity: NO;
11_MCX-75-2-1/113_NE
11_MCX-75-2-1/113_NE by Huber+suhner Ag is a RF MCX connector with 75 ohm impedance, suitable for RG-179B/U cables. Featuring a snap coupling type and brass shell material, it operates from -55 to 155°C. Ideal for commercial applications requiring reliable signal transmission up to 6 GHz.
APPLICABLE CABLES: RG 179B/U, RG 187A/U
RG-179B/U
82_MCX-75-0-5/111_NH
82_MCX-75-0-5/111_NH by Huber+suhner Ag is a RF MCX CONNECTOR with characteristic impedance of 75 ohm, operating up to 6 GHz. Featuring gold-plated BERYLLIUM COPPER contacts, it offers durability of 500 cycles and operates b/w -55°C to 155°C. Ideal for commercial applications requiring reliable board-mounted FEMALE connectors.
.196 inch
82_MCX-S50-0-22/111_NM
82_MCX-S50-0-22/111_NM by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, gold-plated BERYLLIUM COPPER contacts, and SNAP coupling. It has an insulation resistance of 10^10 ohm, dielectric voltage of 1060VAC, and operates b/w -55 to 155 °C. Ideal for board mounting in applications requiring high durability and frequency up to 6 GHz.
.246 inch
1060VAC
10000000000 ohm
MMCX-P-P-H-ST-MT1
Samtec's MMCX-P-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, gold termination finish, and 6 GHz operating frequency. Ideal for commercial applications, it offers high insulation resistance of 1 Gohm and can withstand up to 700VAC dielectric voltage. With a temperature range from -65°C to 125°C, this connector is suitable for various board mounting setups.
SOLDER AND SURFACE MOUNT
252151
Amphenol 252151 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting in applications requiring high-frequency signal transmission with low loss and high-quality gold termination contacts.
INSERTION LOSS MAX AT 1 GHZ
908-22106
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body Depth: .177 inch;
919-119J-51AX
Amphenol's 919-119J-51AX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting in commercial applications, with a durability of 500 cycles.
VSWR MAX AT 2.5 GHZ, INSERTION LOSS MAX AT 1 GHZ
.374 inch
1400VAC
.155 inch
919-130P-51SX
Amphenol's 919-130P-51SX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max frequency. Ideal for RG-174 cables, it is a gold-plated male plug with snap coupling for commercial applications.
APPLICABLE CABLE: RG 188/U, VSWR MAX AT 2.5 GHZ, INSERTION LOSS MAX AT 1 GHZ
908-22101-TC
Amphenol's 908-22101-TC RF MMCX Connector features GOLD finish, LIQUID CRYSTAL POLYMER insulator, and BERYLLIUM COPPER contact material. With a 50 ohm impedance and 6 GHz operating frequency, it is ideal for high-frequency applications requiring surface mount termination in MCX & MMCX Connectors.
MMCX
16_MMCX-50-1-1/111_OH
16_MMCX-50-1-1/111_OH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-196A/U cables. Featuring a max operating frequency of 6 GHz and durability of 500 cycles, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 155 °C.
APPLICABLE CABLES: RG 178B/U; RG 196A/U
.137 inch
RG-196A/U
R113426000W
R113426000W by Radiall S A is a RF MCX CONNECTOR with 50 ohm impedance, gold termination, and SNAP coupling. Ideal for applications requiring high frequency up to 6 GHz, such as in telecommunications and wireless systems. The connector features POLYTETRAFLUOROETHYLENE insulator material and FEMALE contact gender for reliable performance on BOARD mounting.
R113665000W
R113665000W by Radiall S A is a RF MCX connector with gold termination, PTFE insulator, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle receptacle design, it operates at frequencies up to 6 GHz.
1-1337584-0
TE Connectivity's 1-1337584-0 RF MCX Connector features a body length of 0.173", insertion loss of 0.2 dB, and dielectric voltage withstand of 1400VAC. Ideal for applications requiring a durable, right-angle mounted connector with characteristic impedance of 50 ohm and rated current signal up to 3A at frequencies up to 6 GHz.
.334 inch
.173 inch
RG-178B
.2 dB
3 A
908-NM41300
Amphenol's 908-NM41300 RF MMCX Connector has a Dielectric Withstanding Voltage of 700VAC, GOLD Termination Contact Finish, and operates up to 6 GHz. Ideal for RG-316 cables in commercial applications due to its durability of 500 cycles and impedance of 50 ohm.
.32 inch
BRONZE
1.2
1060904-1
TE Connectivity's 1060904-1 RF MCX Connector features 0.1 dB insertion loss, SNAP coupling type, and PTFE insulator. With a 50 ohm impedance, it operates up to 6 GHz. Ideal for applications requiring high-frequency signal transmission in harsh environments.
APPILICABLE CABLE: RG316/U
RD 316
NICKEL
1061001-1
TE Connectivity's 1061001-1 is an RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and is suitable for surface mount applications.
.231 inch
7.5616
MCX-J-C-H-ST-CA1
Samtec's MCX-J-C-H-ST-CA1 RF connector has a 50 ohm impedance, 6 GHz frequency, and 1400VAC dielectric voltage. Ideal for commercial applications, it features gold contact finish, PTFE insulator, and RG-174 cable compatibility. With a temperature range of -65 to 125 °C, this jack-style connector is reliable for various RF connections.
APPLICABLE CABLES: RG 174, RG 316
MCX-J-P-H-ST-SM1
Samtec's MCX-J-P-H-ST-SM1 is a RF MCX connector with 50 ohm impedance, gold finish, and 6 GHz frequency. It is used in board mounting applications for high-frequency signal transmission due to its 1414VAC dielectric voltage rating and -65 to 125 °C operating temperature range.
1414VAC
MCX-P-C-H-ST-CA1
Samtec's MCX-P-C-H-ST-CA1 is a 50 ohm RF MCX connector with gold contact finish, suitable for applications up to 6 GHz. Featuring a snap coupling type and PTFE insulator, it offers low VSWR of 1.3 for high-frequency cable connections. The male plug connector has beryllium copper contacts and supports crimp solder termination on cables.
MCX-CA
MCX-P-P-H-ST-TH2
The Samtec MCX-P-P-H-ST-TH2 is a RF MCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. It features gold-plated contacts, PTFE insulator, and operates b/w -65 to 125 °C. Ideal for commercial applications requiring high reliability in board-mounted setups.
.441 inch
WHITE
.071 inch
© 2023 All rights reserved
