Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
1658614-1
TE Connectivity
TE Connectivity 1658614-1 D-Sub Connector features 37 contacts, matte tin finish, and polyethylene insulator. With EMI shielding and UL94V-0 flammability rating, it operates b/w -55°C to 105°C. Ideal for ribbon cable applications with a rated current of 1.25A in commercial settings.
AMPLIMITE
.496 inch
.49 inch
2.732 inch
RECEPTACLE
RIBBON
D SUBMINIATURE CONNECTOR
PREASSEM CONN
NOT SPECIFIED
Matte Tin (Sn) - with Nickel (Ni) barrier
FEMALE
STAGGERED
25 mohm
RND PIN-SKT
NO
YES
1.668
.032 inch
5000000000 ohm
BLACK
POLYETHYLENE
e3
1.25A
0.109
0.112
MULTIPLE MATING PARTS AVAILABLE
#4-40UNC
THREADED INSERT
STRAIGHT
CABLE
ONE
1
2
105
-55 Cel
GENERAL PURPOSE
30u
1.25 A
UL
COMMERCIAL
TIN
STEEL
4/C
D Type Connectors
2.77
IDC
37
94V-0
26 AWG
28 AWG
.1112
1658614-3
TE Connectivity 1658614-3 D-Sub Connector features 15 contacts, 0.109" pitch, and EMI shielding. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring reliable signal transmission in harsh environments. The connector's matte tin finish and polyethylene insulator ensure high insulation resistance of 5Gohm.
1.541 inch
2/A
15
7-1393740-8
TE Connectivity's 7-1393740-8 is a D-Sub connector with a mating contact pitch of 0.108 inches and body dimensions of 1.228 x 0.509 x 0.17 inches. It features tin termination contact finish, glass-filled PBT-polyester insulator material, and is suitable for board mounting applications.
STANDARD: DIN 41652, SHIELDED
.509 inch
.17 inch
1.228 inch
PLUG
Tin (Sn) - with Nickel (Ni) barrier
MALE
GRAY
GLASS FILLED PBT-POLYESTER
115/230VAC
0.108
SCREWLOCKS
BOARD
2.8448
DIN 41652,
1/E
.126 inch
2.74
SOLDER
9
8-1393740-0
8-1393740-0 by TE Connectivity is a D-Sub Connector with 25 contacts, DIN conformance, and UL 94V-0 flammability rating. It features a body length of 2.103", mating contact pitch of 0.109", and termination contact finish in Tin (Sn). Ideal for board mounting applications requiring reliable commercial-grade connectors with staggered PCB contact pattern.
.18 inch
2.103 inch
Tin (Sn)
3/B
25
9-1393480-9
TE Connectivity's 9-1393480-9 is a D-Sub Connector with a mating contact pitch of 0.108", body length of 1.227", and insulation resistance of 5,000,000,000 ohm. It is commonly used in board mounting applications and conforms to DIN standards.
BOARD LOCK
.591 inch
1.227 inch
POLYETHYLENE/PBT-POLYESTER
2.2A
RIGHT ANGLE
125
2.54
2.2 A
1734285-3
TE Connectivity 1734285-3 D-Sub Connector has Mating Contact Pitch of 0.109", Insulation Resistance of 1Gohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board and panel mounting applications in commercial settings due to its reliability and UL certification.
OTHER STACKING CONNECTOR: 9 CONTACTS, 1/E SHELL SIZE
1.244 inch
.774 inch
1.219 inch
Matte Tin (Sn)
FEMALE-FEMALE
COPPER ALLOY
40 mohm
500VAC
3.336
1000000000 ohm
#4-40
BOARD AND PANEL
2+2
4.064
3 A
.125 inch
2.7686
.1946
5749374-3
TE Connectivity's 5749374-3 D-Sub Connector features 1.213" body length, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting applications with a rated current of 1.5A, UL flammability rating of 94V-0, and operating temperatures from -55 to 105°C.
.492 inch
.236 inch
1.213 inch
1000VAC
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER
INSERT
3
1.9812
1.5 A
NICKEL
2.286
5787683-1
TE Connectivity's 5787683-1 D-Sub Connector features 15 contacts, 0.108" pitch, and 1000000000 ohm insulation resistance. Ideal for board mounting applications with a temperature range of -55 to 105 °C, it offers reliable signal current rating of 6A in a black polyester insulator shell.
#4-40 THD SCREW
.494 inch
20 mohm
2.224
POLYESTER
6A
6 A
CARBON STEEL
1658606-1
TE Connectivity 1658606-1 D-Sub Connector features 50 contacts, 3 rows, and EMI shielding. With a body length of 2.92", it is ideal for cable mounting applications. Operating temperature range from -55 to 105°C makes it suitable for various commercial uses.
LOW PROFILE, SHIELDED
.606 inch
.501 inch
2.92 inch
5/D
1.38
50
1658688-1
TE Connectivity's 1658688-1 is a D-Sub Connector with a body length of 1.355", width of 0.63", and depth of 1.64". It is EMI shielded and has a max operating temperature of 105°C. This connector is commonly used in commercial applications for its reliability and UL reference standard compliance.
.63 inch
1.64 inch
1.355 inch
.19 inch
GLASS FILLED POLYAMIDE
LOCKING
JACKSCREW
2.28
CRIMP
3-1393483-8
TE Connectivity 3-1393483-8 D-Sub Connector features EMI shielding, insulation resistance of 5G ohm, and operating temp range from -55 to 125 °C. Ideal for commercial applications, this female connector with 9 contacts is designed for board mounting with solder termination.
STANDARD: DIN 41652
.381 inch
NOT APPLICABLE
3A
0.11
12.93
1658658-1
TE Connectivity D-Sub Connector 1658658-1 with 25 contacts, 2 rows, and insulation resistance of 5G ohm. Ideal for commercial applications, EMI shielded, UL rated, operating temp -55 to 105°C. Mount on cable or panel using solder termination for reliable signal transmission.
SHIELDED
.425 inch
2.08 inch
15 mohm
.217 inch
HOLE .12
CABLE AND PANEL
7.5 A
20 AWG
1-1734285-3
TE Connectivity 1-1734285-3 D-Sub Connector features 15 contacts, matte tin finish, and copper alloy material. With a rated current of 3A, it is ideal for commercial applications requiring a reliable connection. The connector has a max operating temperature of 105°C and insulation resistance of 1Gohm, suitable for board and panel mounting in various electronic systems.
OTHER STACKING CONNECTOR: 15 CONTACTS, 2/A SHELL SIZE
1.547 inch
1734285
747515-7
TE Connectivity 747515-7 D-Sub Connector with EMI shielding, polyethylene insulator, and 30u tin plating. Ideal for cable mounting applications with 9 contacts, rated at 5A signal current. Suitable for discrete and round cable types in a straight plug configuration.
DISCRETE, ROUND
.455 inch
5A
5 A
22 AWG
215927-1
TE Connectivity 215927-1 is a D-Sub Connector with dimensions of 1.083" x 0.421" x 0.74". It has GLASS FILLED POLYAMIDE insulator, rated for -55 to 125°C. With 7 contacts, it's used in commercial applications for signal currents up to 10A on boards with solder termination.
STANDARDS: MIL-C-24308; MIL-C-39029
.421 inch
.74 inch
1.083 inch
HOLE .112-.124
10 A
7
205733-7
TE Connectivity's 205733-7 D-Sub Connector features GLASS FILLED POLYAMIDE/POLYBUTYLENE TEREPHTHALATE insulator, 2 rows, and 105°C max operating temp. Ideal for board mounting applications with a rated current of 6A, this male connector has a straight plug shell style and solder termination.
STANDARD PROFILE
GLASS FILLED POLYAMIDE/POLYBUTYLENE TEREPHTHALATE
ZINC
.188 inch
205859-1
TE Connectivity 205859-1 D-Sub Connector features 37 contacts with 6A signal rating. With a mating contact pitch of 0.109", it offers EMI shielding and operates b/w -55°C to 105°C. Ideal for board mounting applications, this connector has a staggered PCB contact pattern and solder termination.
ELV COMPLIANT
.799 inch
2.729 inch
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
e0
FLASH
3-1634222-2
TE Connectivity 3-1634222-2 D-Sub Connector with 9 contacts, rated at 3A signal current. Features polyethylene insulation, tin finish, and UL94V-0 flammability rating. Ideal for board and panel mounting applications in commercial environments.
ROHS COMPLIANT
.268 inch
SOCKET
15u
.169 inch
3-1634586-2
TE Connectivity 3-1634586-2 D-Sub Connector features 25 contacts, with a body size of 2.08" x 0.494" x 0.432". It has a mating contact pitch of 0.109", uses tin finish with nickel barrier, and is ideal for board mounting applications in DIN conforming setups.
SPLIT BOARD LOCK
.432 inch
2.84
1-1757819-0
TE Connectivity D-Sub Connector 1-1757819-0 with 50 contacts, rated at 7.5A for signal current. Features a polyester insulator, zinc finish, and steel shell material. Ideal for commercial applications requiring a male plug with crimp termination and staggered contact pattern.
.415 inch
2.65 inch
7.5A
HOLE .115-.125
1757819-1
TE Connectivity's 1757819-1 D-Sub Connector features a mating contact pitch of 0.109", rated current of 7.5A, and operating temperature range from -55 to 125°C. Ideal for commercial applications, this male connector with crimp termination is designed for signal transmission in cable-mounted setups.
1757819-7
TE Connectivity D-Sub Connector 1757819-7 with 15 contacts, rated at 7.5A for signal current. Features polyester insulator material, male contact gender, and crimp termination type. Ideal for commercial applications requiring a reliable connection in temperatures ranging from -55 to 125°C.
1.556 inch
1757819-9
TE Connectivity 1757819-9 D-Sub Connector has a body size of 2.744"x.509"x.415" with polyester insulator material. It features 37 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors with crimp termination on cables.
2.744 inch
1-1757824-0
TE Connectivity D-Sub Connector 1-1757824-0 features POLYPHENYLENE SULFIDE insulator, 62 contacts, and 5A signal current rating. Ideal for commercial applications with operating temperatures from -55 to 125°C. Panel mountable steel connector with female crimp termination and locking option.
AMPLIMITE, COMPATIBLE CONTACT: 204351-1
POLYPHENYLENE SULFIDE
PANEL
2.29
62
1-1757824-1
TE Connectivity D-Sub Connector 1-1757824-1 has dimensions of 2.65"x0.62"x0.415" with POLYPHENYLENE SULFIDE insulator material. It features 78 contacts, rated at 5A, operating from -55 to 125°C. Ideal for commercial applications requiring a female contact design with crimp termination and panel mounting.
.62 inch
78
1757824-1
TE Connectivity's 1757824-1 D-Sub Connector has a body size of 1.228" x 0.509" x 0.415", with POLYPHENYLENE SULFIDE insulator material. It features 15 contacts, rated at 5A, suitable for commercial applications with operating temperatures from -55°C to 125°C. The connector is a female receptacle type with crimp termination and steel shell material, ideal for panel mounting.
1757824-4
TE Connectivity's 1757824-4 D-Sub Connector has a body size of 2.744" x 0.509" x 0.415", with POLYPHENYLENE SULFIDE insulator material. It features 62 contacts, rated for 5A signal current, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable female connectors with crimp termination and panel mounting.
1757824-5
TE Connectivity's 1757824-5 D-Sub Connector has a body size of 2.65" x 0.62" x 0.415", with POLYPHENYLENE SULFIDE insulator material. It features 78 contacts, rated at 5A, suitable for commercial applications with operating temperatures from -55°C to 125°C.
1757824-6
TE Connectivity D-Sub Connector 1757824-6 has 104 contacts, rated at 5A for signal current. Made of steel with zinc finish, it is a female receptacle with round pin sockets. Operating temperature range from -55 to 125°C makes it suitable for commercial applications requiring reliable connections.
.683 inch
6
104
1757824-7
TE Connectivity's 1757824-7 D-Sub Connector has a body size of 1.228" x 0.509" x 0.415", made of POLYPHENYLENE SULFIDE. With 15 contacts, rated at 5A, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable female connector with crimp termination and panel mounting.
1757824-9
TE Connectivity D-Sub Connector 1757824-9 with 44 contacts, POLYPHENYLENE SULFIDE insulator, and steel shell. Rated for 5A signal current, operating from -55 to 125°C. Ideal for commercial applications requiring a reliable panel-mounted connector with crimp termination.
44
106505-2
TE Connectivity's 106505-2 D-Sub Connector features 2 rows, tin termination with nickel barrier, and glass-filled polyester insulator. With a max operating temperature of 105°C, it is ideal for board mounting applications requiring a rated current of 6A. DIN conformance ensures quality standards are met in this female connector suitable for right-angle mounting.
GLASS FILLED POLYESTER
0.1
1-747950-5
TE Connectivity D-Sub Connector 1-747950-5 features EMI shielding, insulation resistance of 500M ohm, and UL flammability rating of 94V-0. Ideal for commercial applications with operating temperature range from -55 to 105°C. Suitable for discrete and round cable types, with male contact gender and plug body style.
.6 inch
2.01 inch
2.865 inch
30 mohm
4.448
.562 inch
500000000 ohm
5208006-2
The TE Connectivity 5208006-2 D-Sub Connector features a mating contact pitch of 0.108", insulation resistance of 1Gohm, and operating temperature range from -55 to 105°C. Ideal for board mounting applications, this male connector with staggered contact pattern and solder termination is reliable for commercial use.
.41 inch
.246 inch
1.216 inch
1218408-8
TE Connectivity D-Sub Connector 1218408-8 with 25 contacts, rated at 5A for signal current. Features right-angle mounting style, female contact gender, and solder termination type. Ideal for commercial applications requiring a reliable board-mounted connector with staggered PCB contact pattern.
2.1 inch
50u
UL, CSA
CADMIUM
.156 inch
3-1393480-6
TE Connectivity 3-1393480-6 D-Sub Connector features 2 rows, 9 contacts, and insulation resistance of 5G ohm. With a body length of 2.744", it is DIN-conformant and operates b/w -55 to 125°C. Ideal for board mounting applications requiring a reliable female receptacle with right-angle mounting style.
#4/40 UNC
8-1393480-1
TE Connectivity 8-1393480-1 D-Sub Connector features 2 rows, 9 contacts, and insulation resistance of 5G ohm. With a body length of 1.228", it is ideal for board mounting applications with operating temperatures ranging from -55 to 125°C. The connector's shell material is steel with a tin finish, UL94V-0 flammability rating, and DIN conformance.
8-1393480-3
TE Connectivity 8-1393480-3 D-Sub Connector features 2 rows, 25 contacts, and insulation resistance of 5G ohm. With a body length of 2.103" and width of 0.509", it is ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
2.76
1-1757823-0
TE Connectivity D-Sub Connector 1-1757823-0 has 62 contacts, rated at 5A for signal current. With a body size of 2.744x.509x.415", it uses GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator material and operates b/w -55 to 125°C. Ideal for commercial applications requiring a male plug with crimp termination and staggered contact pattern.
GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE
0.09
1-1757823-1
TE Connectivity 1-1757823-1 D-Sub Connector has dimensions of 2.65" x 0.62" x 0.415". It features GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator, 78 contacts, and rated current of 5A. Ideal for commercial applications with operating temperatures from -55°C to 125°C.
1-1757823-2
TE Connectivity 1-1757823-2 D-Sub Connector has dimensions of 2.744" x 0.683" x 0.415". With GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator, it operates b/w -55 to 125°C. Featuring 104 contacts, rated at 5A, it is used in commercial applications for signal transmission with male contact gender and crimp termination.
1757823-1
TE Connectivity's 1757823-1 D-Sub Connector has a mating contact pitch of 0.09", body dimensions of 1.228" x 0.509" x 0.415", and operates b/w -55 to 125°C. With a total of 15 contacts, it is used for signal currents up to 5A in commercial applications requiring male crimp terminals with locking mounting options.
1757823-2
The TE Connectivity 1757823-2 D-Sub Connector has a body size of 1.556" x 0.509" x 0.415", with GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator material. It features 26 contacts, rated at 5A, suitable for commercial applications. This male connector is designed for crimp termination and can operate b/w -55°C to 125°C, making it ideal for cable and panel mounting.
26
1757823-5
TE Connectivity's 1757823-5 D-Sub Connector features a Mating Contact Pitch of 0.09", Body Length of 2.65", and Body Width of 0.62". Ideal for commercial applications, this connector has a Total No. of Contacts at 78 and is designed with a Shell Material made of steel for durability in operating temperatures ranging from -55 to 125°C.
1757823-7
The TE Connectivity D-Sub Connector 1757823-7 features a body size of 1.228" x 0.509" x 0.415", with GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator material. It has 15 contacts, rated at 5A for signal current, and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable male plug connector with crimp termination and steel shell construction.
1757823-8
TE Connectivity D-Sub Connector 1757823-8 has body dimensions of 1.556" x 0.509" x 0.415". With GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator, it operates b/w -55 to 125°C. This male connector with 26 contacts and a rated current of 5A is suitable for commercial applications requiring a rugged, locking plug design.
1757823-9
TE Connectivity D-Sub Connector 1757823-9 has body dimensions of 2.103" x 0.509" x 0.415". With GLASS FILLED POLYESTER/POLYPHENYLENE SULFIDE insulator, it operates b/w -55°C to 125°C. Featuring 44 contacts, rated at 5A for signal current, it is used in commercial applications for cable and panel mounting with a locking option.
2-5748394-6
TE Connectivity 2-5748394-6 D-Sub Connector features 62 contacts, 3 loaded rows, and a body length of 2.732". With insulation resistance of 1G ohm and operating temperatures from -55 to 105 °C, it's ideal for board mounting applications requiring high reliability. The connector is UL certified with a dielectric voltage withstand of 1000VAC.
.593 inch
5748394
0.078
2 A
1.2192
© 2023 All rights reserved
