Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
1658610-6
TE Connectivity
TE Connectivity's 1658610-6 D-Sub Connector features a Mating Contact Pitch of 0.109", Insulation Resistance of 5Gohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for commercial applications, this connector has a Total No. of Contacts at 15, Termination Type as IDC, and Mounting Type as Cable.
ROHS COMPLIANT
.496 inch
.323 inch
1.541 inch
PLUG
PREASSEM CONN
AU
FEMALE
PHOSPHOR BRONZE
STAGGERED
25 mohm
RND PIN-SKT
500VAC
1.668
5000000000 ohm
BLACK
POLYETHYLENE
0.109
0.112
#4-40
THREADED
CABLE
2
GENERAL PURPOSE
30u
1.25 A
UL
COMMERCIAL
TIN
STEEL
D Type Connectors
IDC
15
26 AWG
28 AWG
.1112
1-1532179-0
TE Connectivity 1-1532179-0 D-Sub Connector features 2 rows, 9 contacts, and 0.05" mating contact pitch. With a rated current of 3A, it is ideal for commercial applications with operating temperatures ranging from -55 to 125°C. The connector has a female contact gender and wire termination type, suitable for cable mounting with locking option.
.298 inch
.223 inch
.775 inch
NO
YES
3A
0.05
HOLE .087-.098
LOCKING
ONE
1
125
-55 Cel
3 A
1.27
WIRE
9
1532180-8
TE Connectivity D-Sub Connector 1532180-8 has 15 contacts with 2 rows, rated at 3A. With a body size of 0.925"x.298"x.223", it operates b/w -55°C to 125°C. Ideal for commercial applications, it features female contact gender and wire termination in a plug-style body suitable for cable mounting.
.925 inch
1532184-3
TE Connectivity's 1532184-3 D-Sub Connector features a mating contact pitch of 0.05 inches, liquid crystal polymer insulator material, and a max operating temperature of 125°C. It is commonly used in commercial applications requiring a reliable connection with a rated current of 3A.
1.475 inch
MALE
LIQUID CRYSTAL POLYMER
37
25 AWG
1532181-7
TE Connectivity D-Sub Connector 1532181-7 has 21 contacts with 0.05" pitch, rated at 3A for signal current. Ideal for commercial applications, it features male contact gender, wire termination, and plug body style.
1.075 inch
NICKEL
21
1-1532186-8
TE Connectivity 1-1532186-8 D-Sub Connector features LIQUID CRYSTAL POLYMER insulator, 100 contacts, and 25 AWG wire size compatibility. Ideal for commercial applications requiring a male plug with round pin sockets and locking mounting option.
.384 inch
2.16 inch
SOLID
MIXED
115/230VAC
HOLE .138-.163
3
100
1532186-7
TE Connectivity's 1532186-7 D-Sub Connector features Liquid Crystal Polymer insulator, 100 contacts, and 3A signal current rating. With a body size of 2.16" x 0.384" x 0.223", it is ideal for commercial applications requiring reliable female contact connectors with wire termination.
1532186-8
TE Connectivity D-Sub Connector 1532186-8 has body dimensions of 2.16"x.384"x.223" with Liquid Crystal Polymer insulator material. Features 100 contacts, rated at 3A, suitable for commercial applications with operating temperatures from -55 to 125°C. Ideal for cable mounting with female contact gender and round pin/socket design.
1532185-7
TE Connectivity D-Sub Connector 1532185-7 with 51 contacts, liquid crystal polymer insulator, and male contact gender. Ideal for commercial applications requiring a 3A signal current rating. Features a plug body style with wire termination and staggered contact pattern.
.341 inch
1.425 inch
51
1-1532177-1
TE Connectivity 1-1532177-1 D-Sub Connector with 51 contacts, 3A signal rating, and liquid crystal polymer insulator. Ideal for commercial applications requiring reliable female wire termination with a max operating temperature of 125°C. Features staggered contact pattern and locking mounting option for secure cable installation.
.224 inch
RECEPTACLE
1532177-4
TE Connectivity D-Sub Connector 1532177-4 features 51 contacts, liquid crystal polymer insulator, and 3A signal current rating. Ideal for commercial applications with a temperature range of -55 to 125°C, this female connector is designed for wire termination in cable mounting setups.
2-1532177-0
TE Connectivity 2-1532177-0 D-Sub Connector features 51 contacts, Liquid Crystal Polymer insulator, and 3A signal current rating. Ideal for commercial applications with operating temperatures from -55 to 125°C. Suitable for cable mounting with female contact gender and wire termination.
1532178-3
TE Connectivity's 1532178-3 D-Sub Connector has a Mating Contact Pitch of 0.05", Body Length of 2.16", and Insulator Material is LIQUID CRYSTAL POLYMER. With a rated current of 3A, it is ideal for commercial applications requiring reliable female connectors with round pin sockets and wire termination.
4
1-1740199-5
TE Connectivity D-Sub Connector 1-1740199-5 features 2.089" body length, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting applications in commercial settings with a temperature range of -55 to 105°C.
.492 inch
.445 inch
2.089 inch
AU ON NI
TIN OVER NICKEL
1000VAC
1000000000 ohm
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
RIGHT ANGLE
BOARD
105
3.4036
31u
4.5 A
2.7686
SURFACE MOUNT
25
1532174-9
TE Connectivity D-Sub Connector 1532174-9 with 25 contacts, 2 rows, and 0.05" pitch. Operating temp -55 to 125°C. Female contact design for cable mounting applications.
1.175 inch
5748146-6
TE Connectivity 5748146-6 D-Sub Connector features 25 contacts, insulation resistance of 5Gohm, and operating temperatures from -55 to 105°C. Ideal for board mounting applications with compliant boardlock option.
COMPLIANT BOARDLOCK
.494 inch
.236 inch
2.105 inch
D SUBMINIATURE CONNECTOR
NOT SPECIFIED
15 mohm
5.3376
POLYAMIDE/POLYESTER
SCREWLOCKS
STRAIGHT
2.8448
CARBON STEEL
3/B
.228 inch
2.77
PRESS FIT
94V-0
SSL005L2HN
TE Connectivity's SSL005L2HN D-Sub Connector features LIQUID CRYSTAL POLYMER insulator, 90u plating thickness, and 5 contacts. Ideal for board mounting applications with a right-angle receptacle body style.
SHROUDED
.086 inch
.309 inch
D NANOMINIATURE CONNECTOR
JACKSCREW
90u
POLARIZED
0.64
SOLDER
5
5749798-1
TE Connectivity's 5749798-1 D-Sub Connector features a Mating Contact Pitch of 0.09", Insulation Resistance of 1000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board mounting applications in commercial settings with a temperature range from -55 to 105°C.
1.213 inch
9.7856
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER
5749798
0.09
0.078
THREADED INSERT
1.9812
1.5 A
UL, CSA
1/E
.125 inch
2.286
5745182-2
TE Connectivity's 5745182-2 D-Sub Connector has a mating contact pitch of 0.108", body length of 1.213", and insulation resistance of 1000000000 ohm. It is commonly used in board mounting applications for its reliability and rated current of 6A.
.454 inch
NOT APPLICABLE
20 mohm
2.224
GLASS FILLED POLYAMIDE/POLYBUTYLENE TEREPHTHALATE
6A
0.108
HOLE .112-.124
FLASH
6 A
1-1740194-2
TE Connectivity 1-1740194-2 D-Sub Connector features 9 contacts, insulation resistance of 1Gohm, and operating temperature range from -55 to 105°C. Ideal for board mounting applications in commercial settings due to its UL-rated design and female contact gender.
BOARD LOCK
.435 inch
1.212 inch
GLASS FILLED PCT
4.5A
#4-40 UNC
2.74
5745886-1
TE Connectivity 5745886-1 D-Sub Connector features 2 rows, 25 contacts, and insulation resistance of 1G ohm. With a temperature range of -55 to 105°C, it is ideal for board mounting applications requiring a reliable female connector with solder termination.
.453 inch
2.088 inch
CLINCH NUT
2.84
1-1740195-2
TE Connectivity 1-1740195-2 D-Sub Connector features GLASS FILLED PCT insulator, 2 rows, and BOARD LOCK mounting. With -55 to 105 °C operating range, it is ideal for UL-rated applications requiring 4.5A signal current. The male connector with RND PIN-SKT contact design suits board mounting with #4-40 UNC threaded insert option.
1-1740197-2
TE Connectivity 1-1740197-2 D-Sub Connector features 15 contacts, rated at 4.5A for signal current. With insulator made of glass-filled PCT, it operates b/w -55 to 105°C. Ideal for board mounting with right-angle plug style, suitable for UL-rated applications.
2/A
5-747904-4
TE Connectivity's 5-747904-4 D-Sub Connector features a Mating Contact Pitch of 0.109", Insulation Resistance of 5000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for applications requiring a reliable signal current rating of 3A, this connector is designed with a male contact gender and solder termination type for commercial use in cable and panel mounting scenarios.
.209 inch
1.21 inch
10 mohm
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
MULTIPLE MATING PARTS AVAILABLE
HOLE .115-.125
CABLE AND PANEL
8u
.126 inch
20 AWG
.2085
1532252-8
TE Connectivity's 1532252-8 D-Sub Connector features Tin/Lead termination, Liquid Crystal Polymer insulator, and preassembled contact design. Ideal for board mounting applications with 21 contacts, male gender, and plug shell style. Suitable for use in microminiature connectors requiring solder termination.
STANDARD: MIL-DTL-83513/10
D MICROMINIATURE CONNECTOR
Tin/Lead (Sn/Pb)
e0
ALUMINUM ALLOY
C
.14 inch
1532256-3
TE Connectivity's 1532256-3 D Microminiature Connector features 51 contacts, tin/lead termination, and liquid crystal polymer insulator. Ideal for board mounting applications, this plug connector has a right-angle mounting style and solder termination. With an aluminum alloy shell and nickel finish, it is suitable for use in high-voltage mains connectors.
STANDARD: MIL-DTL-83513/11
G
.109 inch
2-5748482-5
TE Connectivity 2-5748482-5 D-Sub Connector features 44 contacts, 3 rows, and a body length of 2.089". With insulation resistance of 1G ohm and dielectric voltage withstand of 1000VAC, it's ideal for board mounting applications in commercial settings with operating temperatures from -55 to +105°C.
AMPLIMITE
.593 inch
Tin (Sn)
30 mohm
e3
2.54
15u
2 A
44
5745115-2
TE Connectivity's 5745115-2 D-Sub Connector features POLYETHYLENE insulator, 2 rows, and 105°C max operating temp. Ideal for board mounting applications with female contact gender and right angle mounting style. Rated at 6A signal current with UL certification for reliability.
SCREW
4/C
5745354-4
TE Connectivity D-Sub Connector 5745354-4 with 37 contacts, 2 rows, and insulation resistance of 1G ohm. Ideal for PCB mounting in commercial applications with operating temperatures from -55 to 105°C. Features male contact gender, solder termination, and right-angle mounting style.
ROHS AND ELV COMPLIANT
.799 inch
2.729 inch
Tin (Sn) - with Nickel (Ni) barrier
5745990-3
TE Connectivity 5745990-3 D-Sub Connector features 1.213" body length, 1000000000 ohm insulation resistance, and 0.494" body width. Ideal for board mounting applications with male contact gender and solder termination type.
.73 inch
GLASS FILLED POLYAMIDE/POLYESTER
ZINC ALLOY
5745994-4
TE Connectivity D-Sub Connector 5745994-4 with 25 contacts, Tin finish, and 6A signal rating. Ideal for commercial applications with operating temperatures from -55 to 105°C. Features staggered PCB contact pattern and solder termination for reliable connections.
SPLIT BOARD LOCK
.74 inch
2.08 inch
5747193-2
TE Connectivity 5747193-2 D-Sub Connector features 50 contacts, insulation resistance of 1G ohm, and operating temperatures from -55 to 105°C. Ideal for board mounting applications requiring a reliable female receptacle connector with staggered contact pattern and solder termination.
.605 inch
.91 inch
2.635 inch
#4-40UNC
5/D
50
5747461-5
TE Connectivity's 5747461-5 D-Sub Connector features 25 contacts, 2 rows, and a body length of 2.08". With insulation resistance of 1G ohm, it is ideal for commercial applications requiring a rated current of 6A. The connector operates b/w -55°C to 105°C and has a right-angle mounting style with solder termination.
.452 inch
.729 inch
6.2272
5747467-4
TE Connectivity D-Sub Connector 5747467-4 features 9 contacts, 2 rows, and insulation resistance of 1G ohm. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring a reliable right-angle plug with male solder termination.
.738 inch
5747470-2
TE Connectivity's 5747470-2 D-Sub Connector features GLASS FILLED POLYAMIDE/POLYESTER insulator, 2 rows, and 105°C max operating temp. Ideal for board mounting applications with 37 contacts, UL-rated design, and male contact gender.
5747497-4
TE Connectivity's 5747497-4 D-Sub Connector features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and operating temperature range from -55 to 105 °C. Ideal for board mounting applications, this connector has a total of 50 contacts and is designed with a staggered PCB contact pattern.
.919 inch
5748482-5
TE Connectivity's 5748482-5 D-Sub Connector has a body length of 2.089", insulation resistance of 1G ohm, and dielectric voltage of 1000VAC. Ideal for board mounting applications in commercial settings due to its female contact gender, right-angle mounting style, and staggered PCB contact pattern.
5748483-5
TE Connectivity D-Sub Connector 5748483-5 with 78 contacts, rated at 2A signal current. Features include 1000000000 ohm insulation resistance, 1000VAC dielectric voltage, and -55 to 105°C operating temperature range. Ideal for board mounting applications in commercial settings.
.602 inch
.693 inch
2.638 inch
0.082
.129 inch
2.4
78
5749767-1
TE Connectivity's 5749767-1 D-Sub Connector has a body length of 1.212", insulation resistance of 1000000000 ohm, and dielectric voltage withstand of 1000VAC. Ideal for board mounting applications with UL flammability rating, it features a male contact gender, right-angle mounting style, and staggered PCB contact pattern.
120u
2.29
1-786863-7
TE Connectivity 1-786863-7 D-Sub Connector has 68 contacts, insulation resistance of 1G ohm, and rated current of 1A. Ideal for commercial applications with operating temperature range from -55 to 105°C. Suitable for ribbon and round cable types in panel mounting configurations.
.406 inch
2.515 inch
RIBBON, ROUND
OTHER D TYPE CONNECTOR
TIN LEAD OVER NICKEL
RECTANGULAR
SQ PIN-SKT
.029 inch
GRAY
POLYESTER
1A
0.1
LATCHING
PANEL
1 A
68
30 AWG
745077-3
TE Connectivity's 745077-3 D-Sub Connector features 15 contacts, 2 rows, and a body length of 1.546". With insulation resistance of 5Gohm, it operates b/w -55°C to 105°C. Ideal for board mounting applications requiring a reliable female connector with solder termination and UL certification.
.42 inch
1.546 inch
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
MIL-C-24308
207828-3
TE Connectivity 207828-3 D-Sub Connector with 25 contacts, rated at 6A signal current. Features include insulation resistance of 5Gohm, operating temperature range from -55 to +105°C, and solder termination. Ideal for board mounting applications requiring reliable connections in harsh environments.
2.095 inch
HOLE .12
745182-2
TE Connectivity 745182-2 D-Sub Connector features 0.109" mating contact pitch, 1.213" body length, and 5000000000 ohm insulation resistance. Ideal for board mounting applications with male contact gender and nickel/gold termination finish.
Nickel/Gold (Ni/Au)
COPPER ALLOY
e4
164534-4
TE Connectivity 164534-4 D-Sub Connector has 37 contacts, 2 rows, and insulation resistance of 5G ohm. With a body length of 2.728", it is used in commercial applications with operating temperatures from -55 to 105 °C for signal currents up to 4A.
AMPLIMITE, COMPTABILE CONTACTS: 166051-1; 166052-1; 5-166051-1
.461 inch
2.728 inch
SOCKET
MACH OR LOOSE
GLASS FILLED POLYETHYLENE
4 A
CRIMP
1-106507-2
TE Connectivity 1-106507-2 is a D-Sub connector with a mating contact pitch of 0.109", body length of 2.08", and insulation resistance of 5,000,000,000 ohm. It is commonly used in board mounting applications and has a max operating temperature of 105°C.
.535 inch
.591 inch
GLASS FILLED POLYESTER
DIN 41652,
1658612-3
TE Connectivity 1658612-3 D-Sub Connector features 15 contacts, 0.109" pitch, and 1.541" body length. With EMI shielding and UL94V-0 flammability rating, it's ideal for commercial applications requiring a reliable signal connection in temperatures ranging from -55 to 105°C.
RIBBON
Matte Tin (Sn) - with Nickel (Ni) barrier
.032 inch
1.25A
5745928-2
TE Connectivity 5745928-2 D-Sub Connector features 25 contacts, insulation resistance of 5Gohm, and operating temperatures from -55 to 105°C. Ideal for board mounting applications in commercial settings due to its UL certification and female contact design with press-fit termination.
.509 inch
5787685-1
TE Connectivity's 5787685-1 D-Sub Connector features 37 contacts, matte tin finish, and insulation resistance of 1G ohm. Ideal for board mounting with a temperature range of -55 to 105°C, it is commonly used in commercial applications requiring reliable signal connections.
#4-40 THD SCREW
© 2023 All rights reserved
