Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
D50P24A6RV09LF
Amphenol Communications Solutions
D50P24A6RV09LF by Amphenol is a 50-contact D-sub connector with nickel finish and polyethylene insulator. It features male contact gender, solder termination, and steel shell material. Ideal for board mounting applications requiring a reliable UL 94V-0 flammability code compliant connector.
STANDARD: DIN 41652
D SUBMINIATURE CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
MALE
NO
POLYETHYLENE
MULTIPLE MATING PARTS AVAILABLE
BOARD
GENERAL PURPOSE
NICKEL
STEEL
5/D
SOLDER
50
94V-0
D50S24A6RV09LF
D50S24A6RV09LF by Amphenol is a 50-contact D-sub connector with nickel finish, polyethylene insulator, and steel shell. It is ideal for board and panel mounting applications requiring reliable solder termination. This female socket connector with UL 94V-0 flammability code is designed for use in various electronic devices.
SOCKET
FEMALE
BOARD AND PANEL
DB5W5SA00LF
DB5W5SA00LF by Amphenol is a D-Sub Connector with 5 contacts, made of steel shell material and polyethylene insulator. It has a body length of 2.073" and width of 0.494", operating temperature range from -55 to 125°C. Ideal for commercial applications requiring high insulation resistance up to 5000000000 ohm.
.494 inch
2.073 inch
PLUG
S0P5
RND PIN-SKT
YES
5000000000 ohm
LOCKING
125
-55 Cel
UL
COMMERCIAL
COPPER TIN
3/B
D Type Connectors
5
DBO9W4S500G40LF
DBO9W4S500G40LF by Amphenol is a D-Sub connector with 9 contacts, pure tin termination, and copper nickel tin shell finish. It features mixed contacts and polyethylene insulator material. Ideal for board mounting applications requiring a female socket connector with UL 94V-0 flammability rating.
Pure Tin (Sn) - with Nickel (Ni) barrier
COPPER NICKEL TIN
9
DC8W8SA00LF
DC8W8SA00LF by Amphenol is a D-Sub connector with 8 contacts, made of steel shell and polyethylene insulator. It has a temperature range of -55 to 125°C, UL94V-0 flammability rating. Ideal for applications requiring reliable female connectors in harsh environments.
4/C
8
DAP15S065TLF
DAP15S065TLF by Amphenol is a 15-contact D-sub connector with polyethylene insulator, tin/zinc chromium finish, and steel shell. It is ideal for board mounting applications requiring a female contact gender. This UL 94V-0 rated connector offers reliable solder termination in a compact 2/A shell size.
TIN/ZINC CHROMIUM
2/A
15
5745410-1
TE Connectivity
TE Connectivity's 5745410-1 D-Sub Connector features 2 rows, tin finish with nickel barrier contacts, and polyethylene insulator. With a temperature range of -55 to 105°C, it is ideal for board mounting applications requiring a male plug with round pin sockets. Rated at 6A signal current, UL certified for safety.
PREASSEM CONN
Tin (Sn) - with Nickel (Ni) barrier
BLACK
e3
6A
0.112
STRAIGHT
1
2
105
30u
6 A
TIN
CARBON STEEL
1/E
.125 inch
2.77
5747375-2
TE Connectivity 5747375-2 D-Sub Connector features 37 contacts, 0.109" pitch, and 1000000000 ohm insulation resistance. Ideal for board mounting applications with a temperature range of -55 to 105 °C, UL-rated for reliability in commercial settings.
AMPLIMITE
.236 inch
2.732 inch
STAGGERED
20 mohm
1000000000 ohm
POLYESTER
0.109
HOLE .112-.124
2.8448
BRASS
37
865637PLTXLF
Amphenol's 865637PLTXLF D-Sub Connector features 37 contacts, 5A power rating, and 1414VAC dielectric voltage. Ideal for cable and panel mounting applications with a temperature range of -55 to 125°C. Contact design includes round pin sockets with crimp termination for durability up to 200 cycles.
.479 inch
.453 inch
2.714 inch
STRIP OR LOOSE
10 mohm
1414VAC
200 Cycles
CABLE AND PANEL
ONE
FLASH
5 A
CRIMP
20 AWG
28 AWG
DA15P064HTXLF
DA15P064HTXLF by Amphenol is a D-sub connector with 15 contacts, made of steel shell material and terminated with matte tin finish. It is commonly used in cable and panel mounting applications, providing reliable connectivity with its solder termination type.
Matte Tin (Sn) - with Nickel (Ni) barrier
DA15P364TXLF
DA15P364TXLF by Amphenol is a D-Sub connector with 15 contacts, tin finish, and polyethylene insulator. It is a male solder type connector suitable for board and panel mounting applications. The shell material is steel with UL94V-0 flammability rating, making it ideal for various electronic devices.
DA15S065TLF
The Amphenol DA15S065TLF is a D-Sub connector with 15 contacts, featuring matte tin finish and polyethylene insulator. It is a female solder type connector suitable for cable and panel mounting applications. The shell material is steel with TIN/ZINC CHROMIUM finish, meeting UL Flammability Code 94V-0 standards.
DA15S364TLF
The Amphenol DA15S364TLF D-Sub Connector features 15 contacts, female gender, and polyethylene insulator material. With tin finish and nickel barrier, it is ideal for board and panel mounting applications requiring a reliable solder termination solution. The connector's steel shell construction ensures durability while meeting UL 94V-0 flammability standards.
DAO15S065TLF
Amphenol's DAO15S065TLF D-Sub Connector features 15 contacts, matte tin finish with nickel barrier, and polyethylene insulator. Ideal for cable and panel mounting applications, this female connector has a steel shell with tin/zinc chromium finish. Compliant with UL 94V-0 flammability code, it offers reliable solder termination.
DAP15P465TXLF
DAP15P465TXLF by Amphenol is a D-Sub connector with 15 contacts, gold termination finish, and polyethylene insulator. It features a tin/zinc chromium shell finish, male contact gender, and wire wrap termination type. Ideal for board and panel mounting applications due to its steel shell material and UL 94V-0 flammability code.
Gold (Au) - with Nickel (Ni) barrier
e4
WIRE WRAP
DB25P064HTXLF
DB25P064HTXLF by Amphenol is a D-Sub Connector with 25 contacts, rated for 5A signal current. Featuring a shell size of 3/B and male contact gender, it has a mating contact pitch of 0.109" and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications due to its locking option and solder termination type.
.185 inch
2.07 inch
HOLE .122
25
DB25S064HTLF
DB25S064HTLF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a mating contact pitch of 0.109", matte tin finish, and polyethylene insulator material. Ideal for applications requiring a temperature range from -55°C to 125°C, it is commonly used in cable and panel mounting setups for reliable connectivity.
DB25S364TLF
DB25S364TLF by Amphenol is a D-Sub connector with 25 contacts, rated at 7.5A signal current. It features a body length of 2.07", insulation resistance of 5Gohm, and operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable female contact connections in a compact steel shell design.
.165 inch
7.3 mohm
2.84
7.5 A
2.76
DB25S565CTLF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.76; No. of PCB Rows: 2;
SPLIT BOARD LOCK
.51 inch
GOLD OVER NICKEL/GOLD FLASH OVER PALLADIUM NICKEL
COPPER ALLOY
25 mohm
RIGHT ANGLE
2.54
DBP25S465TLF
DBP25S465TLF by Amphenol is a D-Sub connector with 25 contacts, rated at 7.5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
.226 inch
GOLD OVER NICKEL
1400VAC
HOLE .12
.5 inch
DC37P064HTXLF
DC37P064HTXLF by Amphenol Communications Solutions is a D-Sub connector with 37 contacts. It has a matte tin finish with nickel barrier and is made of polyethylene insulator material. This connector is suitable for use in cable and panel mounting applications.
DC37P064TXLF
DC37P064TXLF by Amphenol is a D-Sub Connector with 37 contacts, rated for 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications, it has a temperature range from -55 to 125°C and uses solder termination on steel shell material.
.23 inch
RECEPTACLE
MATTE TIN OVER NICKEL
NATURAL
79u
.106 inch
DC37S064TLF
DC37S064TLF by Amphenol is a D-Sub Connector with 37 contacts, rated for 5A signal current. Featuring a dielectric voltage of 1400VAC, it has an insulation resistance of 5000000000 ohm. Ideal for commercial applications, this connector operates b/w -55 to 125°C and uses solder termination on steel shell material.
.238 inch
DD50P064TXLF
DD50P064TXLF by Amphenol is a D-Sub Connector with 50 contacts, rated for 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
.59 inch
2.62 inch
DD50P364TXLF
Amphenol DD50P364TXLF D-Sub Connector features 50 contacts, Tin finish with Nickel barrier, and Polyethylene insulator. Ideal for board and panel mounting applications requiring a male connector with solder termination. Shell made of steel with UL 94V-0 flammability rating.
DD50P564TXLF
DD50P564TXLF by Amphenol is a D-Sub Connector with 50 contacts, rated at 5A signal current. It features a mating contact pitch of 0.109", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
.605 inch
.609 inch
2.635 inch
GOLD FLASH OVER NICKEL
0.056
3
DD50S064TLF
DD50S064TLF by Amphenol is a D-Sub Connector with 50 contacts, 5A signal rating, and 1400VAC dielectric voltage. It features a polyethylene insulator, matte tin over nickel finish, and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable cable or panel mounting with a locking option.
DD50S564TLF
DD50S564TLF by Amphenol is a D-Sub connector with 50 contacts, featuring tin finish with nickel barrier. Its insulator material is polyethylene, and it has a steel shell with UL 94V-0 flammability rating. Ideal for board mounting applications, this female connector uses solder termination and belongs to the 5/D shell size category.
DE09P065TXLF
DE09P065TXLF by Amphenol is a D-Sub Connector with 9 contacts, Matte Tin finish, and Polyethylene insulator. It is a male connector with solder termination suitable for cable and panel mounting applications. The shell material is steel with TIN/ZINC CHROMIUM finish, meeting UL Flammability Code 94V-0 standards.
DE09P067TXLF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; UL Flammability Code: 94V-0; Mounting Type: PANEL;
GOLD (16) OVER NICKEL
D
PANEL
TIN LEAD/ZINC CHROMIUM
DE09P364TXLF
DE09P364TXLF by Amphenol is a D-Sub Connector with 9 contacts, 5A signal rating, and 1400VAC dielectric voltage. Ideal for board and panel mounting applications, it features polyethylene insulation material and staggered PCB contact pattern. Operating temperatures range from -55 to 125°C, meeting UL standards for reliability.
.213 inch
1.198 inch
TIN OVER NICKEL
4.8928
0.108
.193 inch
2.7432
.30024
DE09S364TLF
DE09S364TLF by Amphenol is a D-Sub Connector with 9 contacts, rated at 5A signal current. It has a mating contact pitch of 0.108", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1400VAC. Ideal for board and panel mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
.212 inch
.192 inch
DEP09P365TXLF
DEP09P365TXLF by Amphenol: D-Sub Connector with 9 contacts, 7.5A power rating, and 500M ohm insulation resistance. Ideal for board mounting applications in temperatures ranging from -55 to 125°C. Features gold over nickel termination finish for durability and reliability.
.197 inch
500 Cycles
TIN/ZINC
.24 inch
2.74
DEP09P465TXLF
DEP09P465TXLF by Amphenol: D-Sub Connector with 9 contacts, Gold/Nickel finish, Polyethylene insulator. Ideal for wire wrap termination on boards/panels. UL 94V-0 rated steel shell, male contact gender, size 1/E for reliable connectivity in various applications.
DEP09S365TLF
DEP09S365TLF by Amphenol is a D-Sub Connector with 9 contacts, rated at 7.5A power current and insulation resistance of 5000000000 ohm. It has a body length of 1.198", suitable for applications requiring durable female connectors on boards with operating temperatures ranging from -55 to 125°C.
DEP09S465TLF
DEP09S465TLF by Amphenol is a D-Sub Connector with 9 contacts, rated at 7.5A signal current. It has a body length of 1.198", insulation resistance of 5000000000 ohm, and operates b/w -55°C to 125°C. Ideal for board and panel mounting in commercial applications requiring reliable female connectors with gold over nickel finish.
.256 inch
HOLE .115-.125
THREADED
ICD26S13E4GV00LF
Amphenol's ICD26S13E4GV00LF D-Sub Connector features 26 contacts, matte tin finish with nickel barrier, and polyester insulator. Ideal for board mounting applications, this female connector has a shell made of steel with tin/zinc chromium finish. UL 94V-0 rated for high flammability resistance.
26
ICD44S13E4GX00LF
ICD44S13E4GX00LF by Amphenol: D-Sub Connector with 44 contacts, Matte Tin finish, Polyester insulator. Ideal for board mounting applications requiring a female connector with Shell Size 3/B.
44
ICD44S13E6GX00LF
Amphenol's ICD44S13E6GX00LF D-Sub Connector features 44 contacts, matte tin finish, polyester insulator, and steel shell. Ideal for board mounting applications with female contact gender and solder termination. UL 94V-0 rated for high flammability resistance in various electronic devices.
1647530
Phoenix Contact
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Filter Feature: NO; Empty Shell: NO;
GOLD
Gold (Au)
1652651
Phoenix Contact 1652651 D-Sub Connector features GOLD OVER NICKEL contacts, CHROMATE finish, and 9 contacts. Ideal for PANEL mounting applications with STEEL shell material.
CHROMATE
1652664
Phoenix Contact 1652664 D-Sub Connector features 15 FEMALE contacts in a CHROMATE-finished STEEL shell. With UL 94V-0 rating, it is PANEL mounted for various applications requiring D SUBMINIATURE CONNECTORS like industrial automation and telecommunications.
1652677
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Size: 2/A; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL;
1652680
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; UL Flammability Code: 94V-0; Contact Material: NOT SPECIFIED;
1652693
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Material: STEEL; Mounting Type: PANEL;
1652787
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Material: COPPER ALLOY; Termination Type: SOLDER;
POLYAMIDE
1653061
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Total No. of Contacts: 5; Shell Size: 3/B;
1654785
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: STEEL; Shell Finish: TIN; Termination Type: SOLDER;
© 2023 All rights reserved
