Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
DCMMZ-8H8P-N
ITT Cannon
DCMMZ-8H8P-N by ITT Cannon is a MIL-conforming D-sub connector with 8 contacts, polyester insulator, and chromate finish. Ideal for board mounting, this male plug connector has a steel shell and solder termination. Suitable for applications requiring a compact 4/C shell size with UL flammability rating of 94V-0.
STANDARD: MIL-C-24308, PANEL MOUNT
PLUG
D SUBMINIATURE CONNECTOR
MALE
NO
POLYESTER
YES
MULTIPLE MATING PARTS AVAILABLE
BOARD
GENERAL PURPOSE
CHROMATE
STEEL
4/C
SOLDER
8
94V-0
DD-50S-A197
ITT Cannon's DD-50S-A197 D-Sub Connector features 50 contacts, 0.108" pitch, and 1000VAC dielectric voltage. With a shell size of 5/D, it is ideal for commercial applications requiring a reliable signal connection in temperatures ranging from -55 to 105°C. The connector utilizes female contacts with stamped design and solder termination on a steel shell for secure cable mounting.
PANEL MOUNT
.605 inch
.39 inch
2.634 inch
RECEPTACLE
STAMPED, PREASSEM
NOT SPECIFIED
NOT APPLICABLE
FEMALE
STAGGERED
15 mohm
RND PIN-SKT
1000VAC
POLYETHYLENE
0.108
0.112
HOLE .112-.124
CABLE
2
105
-55 Cel
5 A
UL
COMMERCIAL
TIN
5/D
D Type Connectors
50
20 AWG
DDMM-50P-D
DDMM-50P-D by ITT Cannon is a D-Sub connector with 50 contacts, UL 94V-0 flammability rating, and MIL-C-24308 reliability standard. It features a mating contact pitch of 0.109", insulator material of glass-filled diallyl phthalate, and operating temperatures ranging from -65°C to 150°C. Ideal for board mounting applications requiring a right-angle plug with staggered contact pattern.
STANDARD: MIL-C-24308, PANEL MOUNTABLE
.507 inch
2.635 inch
55 mohm
GREEN
GLASS FILLED DIALLYL PHTHALATE
0.109
RIGHT ANGLE
3
150
-65 Cel
2.8448
50u
MIL-C-24308
.127 inch
2.7686
DDMM-50P-L
The ITT Cannon DDMM-50P-L D-Sub Connector features 50 contacts, gold-plated with nickel barrier for reliability. With a temperature range of -65 to 150°C, it's ideal for PCB mounting applications. Its MIL-C-24308 conformity and UL 94V-0 flammability rating ensure high performance in demanding environments.
GOLD OVER NICKEL
Gold (Au) - with Nickel (Ni) barrier
COPPER ALLOY
e4
.158 inch
DEM-9P-D
ITT Cannon's DEM-9P-D D-Sub Connector features 9 contacts, gold termination, and glass-filled insulator. With a temperature range of -65 to 150°C, it is ideal for board mounting applications requiring reliable MIL-C-24308 compliance. The connector's staggered PCB contact pattern and right-angle mounting style offer versatility in electronic designs.
PANEL MOUNTABLE
.494 inch
.395 inch
1.213 inch
GOLD
1/E
2.7432
9
DEMM-9P-D
The ITT Cannon DEMM-9P-D D-Sub Connector features 9 contacts, glass-filled insulator, and MIL-C-24308 reliability. With a temperature range of -65 to 150°C, it is ideal for board mounting applications requiring a male contact gender and solder termination. The compact design with right-angle mounting suits space-constrained environments.
DEMM-9P-L
The ITT Cannon DEMM-9P-L D-Sub Connector features gold over nickel termination, glass-filled insulator, and 9 male contacts. With a temperature range of -65 to 150°C, it is ideal for board mounting applications requiring reliable MIL-C-24308 conformity. The connector's staggered PCB contact pattern and right-angle mounting style make it versatile for various electronic systems.
DEMM-9S-L
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-24308; Contact Gender: FEMALE; No. of PCB Rows: 2; Maximum Operating Temperature (Cel): 150;
Gold (Au)
THERMOPLASTIC PCT
BOARD AND PANEL
L77HDE15SVF
Amphenol
The Amphenol L77HDE15SVF D-Sub Connector features 15 contacts with Tin finish, Gold over Nickel mating contact, and Phosphor Bronze material. Ideal for board and panel mounting applications, this UL 94V-0 compliant connector is designed with glass-filled polyethylene insulator in a steel shell for reliable performance.
STANDARD: MIL C24308
GOLD OVER NICKEL (50)
Tin (Sn) - with Nickel (Ni) barrier
PHOSPHOR BRONZE
GLASS FILLED POLYETHYLENE
e3
15
83611-9006
Molex
The Molex 83611-9006 D-Sub Connector has a mating contact pitch of 0.05", dielectric voltage rating of 600VAC, and operates b/w -40 to 125°C. Ideal for board mounting applications, this male connector with staggered contact pattern is reliable for commercial use in electronics.
.308 inch
.41 inch
.785 inch
D MICROMINIATURE CONNECTOR
Tin (Sn)
600VAC
LIQUID CRYSTAL POLYMER
0.05
LOCKING
JACKPOST
125
-40 Cel
2.54
1 A
NICKEL
A
.11 inch
1.27
DCMMP8X8PP
DCMMP8X8PP by ITT Cannon is a D-Sub connector with 2 rows, 8 contacts, and glass-filled insulator. It has a dielectric voltage of 1700VAC, operates b/w -65 to 150°C, and conforms to MIL standards. Ideal for commercial applications requiring reliable cable connections in tight spaces.
APPLICABLE CABLES: RG 196/U; RG 1788/U; RG 187/U
HOLE .125
2.729 inch
S0C8
COAX
1700VAC
#4-40
THREADED
ONE
.131 inch
CRIMP
DEMA-9S-F0
DEMA-9S-F0 by ITT Cannon is a D-sub connector with 9 contacts, gold over nickel finish, and glass-filled insulator. It operates b/w -55 to 125°C, rated at 7.5A signal current, and has a durability of 200 cycles. Ideal for cable and panel mounting applications due to its steel shell material and female contact gender.
COMPATIBLE CONTACTS: 031-1007-000; 031-1007-001; 031-1007-004
.189 inch
10 mohm
200 Cycles
BLACK
HOLE .12
CABLE AND PANEL
7.5 A
28 AWG
2749550
Phoenix Contact
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SHEILDED
METAL
2749563
Phoenix Contact 2749563 is a D-SUBMINIATURE CONNECTOR with 5 FEMALE contacts. Featuring METAL shell, it has Shell Size 2/A and CABLE mounting type. Ideal for industrial applications requiring reliable connection in harsh environments.
2/A
5
8225-8009
3m Electronic Products Division
8225-8009 D-Sub Connector by 3M EPD features a body length of 2.09", insulation resistance of 1G ohm, and dielectric voltage withstand of 1400VAC. Ideal for commercial applications, it has a contact gender of male, shell material of steel, and termination type of crimp.
.49 inch
2.09 inch
1400VAC
1000000000 ohm
GRAY
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
0.11
RIVET
30u
3/B
25
26 AWG
L77SDD50SOL2
Amphenol's L77SDD50SOL2 D-Sub Connector features 50 contacts, 3 rows, and insulation resistance of 5G ohm. With a temperature range of -55 to 125°C, it suits commercial applications requiring reliable signal transmission on boards with staggered contact patterns.
.598 inch
.22 inch
2.63 inch
GOLD FLASH OVER NICKEL (50)
TIN OVER NICKEL
20 mohm
5000000000 ohm
STRAIGHT
FLASH
3 A
.173 inch
L717TWC8W8P
The Amphenol L717TWC8W8P is a D-Sub connector with 8 mixed contacts, glass-filled polyethylene insulator, and tin shell finish. Ideal for cable and panel mounting applications, this male connector features a steel shell material and UL 94V-0 flammability code.
TW
L77TWC8W8S
Amphenol's L77TWC8W8S D-Sub Connector features 8 female contacts, glass-filled polyethylene insulator, and steel shell with tin finish. Ideal for cable and panel mounting applications requiring a mixed contact connector with UL 94V-0 flammability rating.
N10214-52B2PC
N10214-52B2PC by 3M is a D-Sub Connector with 14 contacts, gold mating finish, and UL-rated. It has a body length of 1.16", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting in commercial applications requiring high reliability.
3M
.37 inch
.45 inch
1.16 inch
OTHER D TYPE CONNECTOR
GOLD (30) OVER NICKEL (80)
RECTANGULAR
500VAC
500000000 ohm
BEIGE
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
M2.5
4
1.905
GLASS FILLED PCT
.15 inch
14
N10236-52B2PC
N10236-52B2PC by 3m Electronic Products Division is a D-Sub Connector with a mating contact pitch of 0.05 inches, body length of 1.71 inches, and insulation resistance of 500MΩ. It is commonly used in board and panel mounting applications for its right angle mounting style and female contact gender.
1.71 inch
36
N10250-52G3PC
N10250-52G3PC by 3M Electronic Products Division is a D-Sub Connector with 50 contacts, gold-plated copper alloy material, and UL flammability rating of 94V-0. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to 105°C. Ideal for board and panel mounting applications requiring high reliability in commercial settings.
2.06 inch
L717HDEH15POL2RM5C309
Amphenol's L717HDEH15POL2RM5C309 D-Sub Connector features 15 contacts with Tin-Nickel finish, Glass Filled Polyethylene insulator, and Steel shell. Ideal for board and panel mounting applications, this UL94V-0 rated connector is a male plug type suitable for MIL conformity requirements.
STANDARD: MIL-C-24308
L717HDEH15POL2RM5
Amphenol's L717HDEH15POL2RM5 D-Sub Connector features 15 contacts with gold flash finish, glass-filled polyethylene insulator, and tin shell. Ideal for board and panel mounting applications, this male plug connector is made of brass with steel shell material. UL 94V-0 rated for high flammability resistance.
GOLD FLASH
BRASS
L717HDEH15POL2RM8
The Amphenol L717HDEH15POL2RM8 D-Sub Connector features 15 contacts, TIN over Nickel finish, and Glass Filled Polyethylene insulator. Ideal for board and panel mounting applications, this male plug connector has a steel shell with UL 94V-0 flammability rating.
ID09S33E4GX00LF
Amphenol Communications Solutions
ID09S33E4GX00LF by Amphenol is a D-Sub connector with 9 contacts, gold tin finish, and polyester insulator. Ideal for board mounting applications, it features a steel shell with tin/zinc chromium finish. This female connector has UL 94V-0 flammability rating and solder termination.
GOLD TIN
TIN/ZINC CHROMIUM
CBC7W2M00000/AA
Positronic Industries
Positronic Industries' CBC7W2M00000/AA D-Sub Connector features 7 mixed contacts in a steel shell with zinc finish. Made of glass-filled polyester, it is UL 94V-0 rated for flammability. Ideal for applications requiring reliable male connectors in size 2/A.
GLASS FILLED POLYESTER
ZINC
7
K202XHT-E9PN30
Kycon
K202XHT-E9PN30 by Kycon is a D-Sub connector with 9 contacts, gold termination finish, and 700VAC dielectric voltage. It is ideal for board mounting applications in commercial settings, offering a temperature range of -55 to 105°C. With a compact size of 1.213" x 0.494" x 0.194", it provides reliable signal transmission with low contact resistance.
.194 inch
13 mohm
700VAC
THREADED INSERT
1
2 A
1.3716
SURFACE MOUNT
K202XHT-E9PNJ30
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Terminal Pitch (mm): 1.3716;
GOLD (30)
JACKSCREW
K202XHT-E9S-NJ30
Kycon's K202XHT-E9S-NJ30 D-Sub Connector features 2 rows, 9 contacts, gold-plated phosphor bronze contacts with 13 mohm resistance. With a dielectric voltage of 700VAC and operating temperatures from -55 to 105 °C, it is ideal for board mounting in commercial applications.
K202XHT-E9S-NJ
K202XHT-E9S-NJ by Kycon is a D-Sub connector with 9 contacts, gold flash termination, and 700VAC dielectric voltage. Ideal for board mounting applications in commercial settings, it offers a temperature range of -55 to 105°C and high insulation resistance of 1Gohm. With a compact body size of 1.213" x 0.494" x 0.194", this connector ensures reliable signal transmission at up to 2A current rating.
Gold Flash (Au)
K31X-A15S-NJ
Kycon's K31X-A15S-NJ D-Sub Connector features 15 contacts, gold flash finish, and polyethylene insulator. With a dielectric voltage of 1000VAC, it operates b/w -55 to 105°C. Ideal for board mounting applications requiring high insulation resistance and signal current up to 2A.
ROHS COMPLIANT
.157 inch
1.541 inch
GOLD FLASH OVER NICKEL
.7874
.087 inch
K61X-E15S-NJ
K61X-E15S-NJ by Kycon is a D-Sub connector with 15 contacts, rated at 2A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 1Gohm, suitable for PCB mounting applications. With a temperature range from -55 to 105°C, it offers reliable performance in various commercial electronic systems.
.35 inch
POLYBUTYLENE TEREPHTHALATE
0.078
1.9558
UL, CSA
.125 inch
2.286
K61X-E15S-NVESA
K61X-E15S-NVESA D-Sub Connector by Kycon features 15 contacts, gold flash finish, and polybutylene terephthalate insulator. With a dielectric voltage of 1000VAC, it is ideal for commercial applications requiring a reliable signal current of 2A. This right-angle receptacle has a temperature range from -55 to 105°C, making it suitable for various board mounting configurations.
K61X
D09S24A6RV12LF
D09S24A6RV12LF by Amphenol is a 9-contact D-sub connector with female contact gender, suitable for board mounting via solder termination. Its shell size is 1/E. Ideal for applications requiring reliable and secure connections in electronic devices.
D25S24A6RL12LF
D25S24A6RL12LF by Amphenol is a 25-contact D-Sub connector with 2 rows, rated for 5A signal current. Featuring polyethylene insulation and nickel shell finish, it operates b/w -55°C to 125°C. Ideal for board and panel mounting applications due to its staggered PCB contact pattern and female contact gender.
STANDARD: DIN 41652
SPLIT BOARD LOCK
.236 inch
2.07 inch
M3
2.84
2.76
D25S24A6RX12LF
D25S24A6RX12LF by Amphenol is a 25-contact D-Sub connector with 2 rows, ideal for board and panel mounting. Featuring a body length of 2.07" and insulation resistance of 5G ohm, it operates b/w -55°C to 125°C. With a shell made of steel and nickel finish, it's suitable for applications requiring reliable signal connections at up to 5A current rating.
DCO8W8S543H30LF
DCO8W8S543H30LF by Amphenol is a D-Sub connector with 8 contacts, POLYETHYLENE insulator, and STEEL shell. It features FEMALE contact gender, SOLDER termination, and BOARD mounting type. Ideal for applications requiring reliable data transmission in industrial equipment and communication systems.
DAO3V3P500H30LF
DAO3V3P500H30LF by Amphenol is a D-Sub Connector with 3 contacts, rated at 7.3A signal current. It features bright tin over nickel termination, polyethylene insulator, and copper nickel tin shell finish. Ideal for board and panel mounting in commercial applications requiring high insulation resistance of 5Gohm.
S0P3
BRIGHT TIN OVER NICKEL
7.3 mohm
7.3 A
COPPER NICKEL TIN
DBO13W3P700G30LF
DBO13W3P700G30LF by Amphenol is a D-Sub connector with 13 contacts, rated at 7.5A signal current. It features pure bright tin over nickel termination finish and polyethylene insulator material. Ideal for board mounting applications requiring high insulation resistance of 5000000000 ohm.
S10P3
PURE BRIGHT TIN OVER NICKEL
13
DCL8W8P500G40LF
DCL8W8P500G40LF by Amphenol Communications Solutions is a D-Sub connector with 8 contacts and a shell size of 4/C. It has an insulation resistance of 5 Gohm, mixed contacts, and a contact material of brass. This connector is commonly used in board and panel mounting applications.
S0P8
Bright Tin (Sn) - with Nickel (Ni) barrier
D
D09P24A6RL09LF
The Amphenol D09P24A6RL09LF is a 9-contact D-SUB connector with male gender, suitable for board mounting via solder termination. Featuring shell size 1/E, it is ideal for applications requiring reliable data transmission in industrial and telecommunications equipment.
D15S24A6RV09LF
D15S24A6RV09LF by Amphenol is a 15-contact D-sub connector with polyethylene insulator, nickel shell finish, and steel shell material. It is ideal for board and panel mounting applications requiring a female socket contact gender. This UL 94V-0 rated connector offers reliable solder termination in various electronic devices.
SOCKET
D25P24A6RV09LF
D25P24A6RV09LF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a body length of 2.07", insulation resistance of 5000000000 ohm, and operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable male contact pins in staggered patterns.
SCREWLOCKS
D25S24A6RL09LF
D25S24A6RL09LF by Amphenol is a 25-contact D-Sub connector with 2 rows, rated for 5A signal current. Featuring polyethylene insulation and nickel shell finish, it operates b/w -55°C to 125°C. Ideal for board and panel mounting applications requiring reliable female socket contacts in a compact steel shell design.
D25S24A6RV09LF
D25S24A6RV09LF by Amphenol is a D-Sub Connector with 25 contacts, rated at 5A signal current. It features a body length of 2.07", insulation resistance of 5000000000 ohm, and shell material made of steel. Ideal for applications requiring reliable board and panel mounting in environments ranging from -55°C to 125°C.
D25S24A6RX09LF
Amphenol D25S24A6RX09LF is a 25-contact D-Sub connector with 2 rows, ideal for board and panel mounting. Featuring polyethylene insulation, it offers high insulation resistance of 5 Gohm. With a rated current of 5A, this female socket connector has a shell made of steel and operates b/w -55°C to 125°C.
D37P24A6RL09LF
The Amphenol D37P24A6RL09LF is a D-sub connector with 37 contacts, nickel shell finish, and polyethylene insulator. Ideal for board mounting applications, it features male contact gender and steel shell material. UL 94V-0 flammability code ensures safety in various electronic devices.
37
D50P24A6RL09LF
D50P24A6RL09LF by Amphenol is a 50-contact D-sub connector with nickel finish and polyethylene insulator. It features male contacts, steel shell material, and solder termination. Ideal for board mounting applications requiring a compact 5/D shell size with UL 94V-0 flammability rating.
© 2023 All rights reserved
