Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
RMDM-9SCBRP
ITT Cannon
RMDM-9SCBRP by ITT Cannon is a D-sub connector with 9 contacts, gold termination finish, and liquid crystal polymer insulator. It operates in temperatures from -55 to 150°C and has a dielectric voltage of 600VAC. Ideal for board mounting applications requiring a durable, high-performance microminiature connector.
.308 inch
.42 inch
.785 inch
RECEPTACLE
D MICROMINIATURE CONNECTOR
GOLD
FEMALE
STAGGERED
8 mohm
RND PIN-SKT
600VAC
500 Cycles
NO
5000000000 ohm
LIQUID CRYSTAL POLYMER
e4
0.05
MULTIPLE MATING PARTS AVAILABLE
#2-56UNC
RIGHT ANGLE
BOARD
ONE
2
150
-55 Cel
GENERAL PURPOSE
3 A
CADMIUM CHROMATE
ALUMINUM ALLOY
A
.109 inch
2.54
SOLDER
9
94V-0
24 AWG
10090098-S254XLF
Fci
10090098-S254XLF by Fci is a D-Sub Connector with 25 contacts, rated for 5A signal current. It features gold flash over nickel mating contact finish, glass-filled polyethylene insulator material, and a max operating temperature of 105°C. Ideal for board and panel mounting applications requiring high durability and reliability.
SPLIT BOARD LOCK
.494 inch
.283 inch
2.088 inch
SOCKET
D SUBMINIATURE CONNECTOR
GOLD FLASH OVER NICKEL (30)
MATTE TIN OVER NICKEL
COPPER ALLOY
40 mohm
1400VAC
50 Cycles
4.8928
BLACK
GLASS FILLED POLYETHYLENE
e3
0.109
0.112
#4-40
CLINCH NUT
STRAIGHT
BOARD AND PANEL
105
2.84
FLASH
5 A
UL
COMMERCIAL
NICKEL
STEEL
3/B
D Type Connectors
.126 inch
2.77
25
L177RRB25S
Amphenol
The Amphenol L177RRB25S D-Sub Connector has 25 contacts with 0.109" pitch, suitable for commercial applications. With a dielectric voltage of 1200VAC and insulation resistance of 1Gohm, it operates b/w -55°C to 105°C. Its steel shell and crimp termination make it ideal for cable and panel mounting in various electronic systems.
.161 inch
NOT SPECIFIED
30 mohm
1200VAC
1000000000 ohm
LOCKING
CABLE AND PANEL
TIN
CRIMP
L77TWA3W3S
The Amphenol L77TWA3W3S D-Sub Connector features 0.27" contact pitch, 1.535" body length, and 5000000000 ohm insulation resistance. Ideal for commercial applications, this female connector with round pin sockets operates b/w -55°C to 155°C and has a dielectric voltage of 1000VAC.
.488 inch
.24 inch
1.535 inch
RECTANGULAR
1000VAC
0.27
HOLE .122
PANEL
1
155
3
SD25M00000
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 7.5 A; Filter Feature: NO;
.437 inch
2.08 inch
MALE
YES
GLASS FILLED POLYAMIDE
HOLE .12
7.5 A
ZINC
5747830-4
TE Connectivity
TE Connectivity's 5747830-4 D-Sub Connector features a body size of 2.08"x.509"x.59", with POLYETHYLENE insulator and Tin (Sn) finish contacts. With 25 contacts, it operates b/w -55 to 105°C, rated at 6A for signal current. Ideal for board mounting applications requiring a right-angle receptacle with locking option.
AMPLIMATE
BOARD LOCK
.509 inch
.59 inch
PREASSEM CONN
Tin (Sn) - with Nickel (Ni) barrier
POLYETHYLENE
6A
30u
6 A
ZINC ALLOY
.125 inch
2.74
1658607-1
TE Connectivity D-Sub Connector 1658607-1 with 50 contacts, matte tin finish, and polyethylene insulator. Ideal for ribbon cable applications with UL rating and EMI shielding. Operating temp -55 to 105°C, suitable for commercial use in electronics requiring reliable signal transmission.
LOW PROFILE, LATCHED
.606 inch
2.92 inch
PLUG
RIBBON
Matte Tin (Sn) - with Nickel (Ni) barrier
25 mohm
4.0032
.032 inch
1.25A
#4-40UNC
THREADED INSERT
CABLE
1.25 A
5/D
IDC
50
26 AWG
28 AWG
3.9198
1658615-2
TE Connectivity D-Sub Connector 1658615-2 with 25 contacts, 0.109" pitch, and EMI shielding is ideal for cable mounting applications. Featuring a body length of 2.09", insulation resistance of 5Gohm, and operating temperatures from -55 to 105°C, it ensures reliable signal transmission in various environments.
ROHS COMPLIANT
.496 inch
.333 inch
2.09 inch
1.668
.1112
1658656-1
TE Connectivity's 1658656-1 D-Sub Connector features EMI shielding, Tin termination finish, and Glass Filled Polyamide insulator. With UL certification, it is ideal for applications requiring a female contact gender, cable mounting type, and a max operating temperature of 105°C.
AMPLIMITE
Tin (Sn)
.19 inch
115/230VAC
JACKSCREW
2/A
15
1658684-1
TE Connectivity D-Sub Connector 1658684-1 with 62 contacts, 3 rows, and insulation resistance of 5 Gohm. Ideal for commercial applications, EMI shielded with steel shell material. Mating contact pitch of 0.109", suitable for -55 to 105°C operating temperature range.
.432 inch
2.729 inch
NOT APPLICABLE
15 mohm
1.112
HOLE .112-.124
4/C
2.41
62
22 AWG
1532182-3
TE Connectivity 1532182-3 D MICROMINIATURE CONNECTOR has 25 contacts, rated at 3A for signal current. Operating from -55 to 125°C, it is a D-Sub PLUG connector with 1.27mm terminal pitch. Ideal for applications requiring a compact and high-performance connector solution.
3A
125
D
1.27
1532188-1
TE Connectivity 1532188-1 is a D-Sub Connector with 15 contacts, rated at 3A signal current. It features a mating contact pitch of 0.05", insulation resistance of 5G ohm, and operates in temperatures ranging from -55 to 125°C. Ideal for applications requiring a reliable microminiature connector with solder lug termination and staggered contact pattern.
.298 inch
.224 inch
.925 inch
HOLE .087-.098
MIL-C-83513
B
.11 inch
SOLDER LUG
.139
1532203-1
TE Connectivity's 1532203-1 D MICROMINIATURE CONNECTOR has a total of 21 contacts, rated at 3A for signal current. With a temperature range from -55 to 125°C, it is suitable for applications requiring a compact D-Sub Connector with a shell size of C and terminal pitch of 1.27mm.
C
21
1532204-1
TE Connectivity's 1532204-1 D MICROMINIATURE CONNECTOR has 25 contacts, rated at 3A. With a body size of 1.175" x 0.298" x 0.224", it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable female receptacle with staggered contact pattern and locking mounting option.
1.175 inch
1532210-1
TE Connectivity's 1532210-1 D-Sub Connector features PREASSEM CONN contact design, NICKEL shell finish, and BLACK insulator color. Ideal for applications requiring a D MICROMINIATURE CONNECTOR with 15 contacts in a PLUG body style.
1532214-1
TE Connectivity's 1532214-1 D MICROMINIATURE CONNECTOR has a temperature range of -55 to 125°C. With 37 contacts, it can handle a signal current of 3A. The plug connector is ideal for applications requiring a compact and reliable connection solution.
F
37
1532215-1
TE Connectivity 1532215-1 is a D MICROMINIATURE CONNECTOR with 51 contacts in G size shell. It's a PLUG connector rated for 115/230VAC, suitable for various applications requiring high contact density and compact design.
G
51
FCE17-B25PC-20B
FCE17-B25PC-20B by Amphenol is a D-Sub connector with 25 contacts, rated at 5A. It features a mating contact pitch of 0.11", matte tin finish, and glass-filled polyethylene insulator material. Ideal for board mounting applications, this connector has a shell made of steel and offers filtering capabilities.
RIVET METAL BRACKET
.759 inch
MATTE TIN
Matte Tin (Sn)
0.11
2.76
L717SDEH09POL2RM8
Amphenol's L717SDEH09POL2RM8 D-Sub Connector features 0.108" mating contact pitch, 1.21" body length, and 5000000000 ohm insulation resistance. Ideal for board and panel mounting applications requiring a male connector with gold over nickel mating contact finish.
STANDARDS: DIN 41652
.605 inch
.244 inch
1.21 inch
GOLD OVER NICKEL
20 mohm
1414VAC
0.108
0.078
1/E
.173 inch
1-747943-6
TE Connectivity 1-747943-6 is a D-Sub Connector with dimensions of 1.355" x 0.63" x 1.64". It has an insulation resistance of 5G ohm, EMI shielding, and can handle temperatures from -55°C to 105°C. This connector is commonly used in cable applications and has a rated current of 5A.
SHIELED
.63 inch
1.64 inch
1.355 inch
DISCRETE, ROUND
2.224
.375 inch
5A
.2085
1-747946-5
TE Connectivity 1-747946-5 D-Sub Connector features EMI shielding, insulation resistance of 500M ohm, and rated current of 5A. Ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -55 to 105°C.
1.65 inch
1.685 inch
9.7856
500000000 ohm
1-747948-6
TE Connectivity D-Sub Connector 1-747948-6 features 25 contacts, 5A signal current rating, and EMI shielding. Ideal for commercial applications with -55 to 105°C operating range. Mates at 0.109" pitch for secure connections in cable mounting setups.
.435 inch
5745783-4
TE Connectivity D-Sub Connector 5745783-4 with 25 contacts, 0.108" pitch, and 2 rows is ideal for board mounting applications. Features include insulation resistance of 5Gohm, operating temp range -55 to +105°C, and UL94V-0 flammability rating. Suitable for commercial use in electronics requiring reliable signal connections.
.497 inch
#4-40 UNC
5747842-6
TE Connectivity D-Sub Connector 5747842-6 with 25 contacts, matte tin finish, and 6A signal rating. Ideal for board mounting applications with staggered PCB contact pattern and UL flammability rating. Operating temperature range from -55 to 105°C makes it suitable for commercial use.
.508 inch
POLYAMIDE/POLYESTER
SCREWLOCKS
5788800-1
TE Connectivity 5788800-1 D-Sub Connector features 2 rows, 25 contacts, and insulation resistance of 1Gohm. With a temperature range of -55 to +105°C, it is ideal for commercial applications requiring a reliable right-angle mounting option with solder termination.
1218441-6
TE Connectivity's 1218441-6 is a D-Sub connector with a mating contact pitch of 0.109 inch and a body length of 1.228 inch. It has an insulator material made of POLYPHENYLENE SULPHIDE and can operate at temperatures ranging from -55 to 125 °C. This connector is commonly used in board mounting applications, offering a reliable solution with its 5A rated current and right angle mounting style.
AMPLIMITE, STANDARD : MIL-C-24308; MIL-C-39029
.534 inch
1.228 inch
POLYPHENYLENE SULPHIDE
2.8448
50u
CADMIUM
.156 inch
L77SDDH50SOL2RM8
Amphenol L77SDDH50SOL2RM8 D-Sub Connector features 50 contacts, 3 rows, and insulation resistance of 1Gohm. With a mating contact pitch of 0.109", it is ideal for board and panel mounting applications in environments ranging from -55°C to 125°C. The connector's shell material is steel with a tin finish, meeting MIL, NFC, and UL standards.
2.64 inch
5.293
THREADED
MIL,NFC,UL
0.578
MWDM2L-9PSB
Glenair
MWDM2L-9PSB by Glenair is a D-sub connector with 9 contacts, rated for 3A signal current. It features a mating contact pitch of 0.05", insulation resistance of 5Gohm, and can withstand temperatures from -55 to 150°C. Ideal for military applications due to MIL conformity and durable design lasting up to 500 cycles.
STANDARD: MIL-DTL-83513
.233 inch
32 mohm
2.78
GLASS FILLED LIQUID CRYSTAL POLYMER/GLASS FILLED POLYPHENYLENE SULFIDE
0.043
HOLE .096
MIL
1757835-5
TE Connectivity D-Sub Connector 1757835-5 with 50 contacts, rated at 5A signal current. Features right-angle mounting style, staggered PCB contact pattern, and polyester/polypenylene sulfide insulator material. Ideal for commercial applications requiring reliable board-mounted male connectors.
STANDARDS: MIL-C-24308, MIL-C-39029
.62 inch
2.65 inch
POLYESTER/POLYPHENYLENE SULFIDE
HOLE .115-.125
10u
5-208875-1
TE Connectivity 5-208875-1 D-Sub Connector has 62 contacts, rated at 3A. With a body size of 2.729" x 0.494" x 0.414", it operates b/w -55°C to 125°C. Ideal for board mounting applications with staggered PCB contact pattern and solder termination.
.414 inch
1.9812
UL, CSA
.275 inch
2.29
638-026-230-042
Edac
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 707 VAC; No. of Connectors: ONE; Terminal Length: .189 inch;
.256 inch
1.541 inch
GOLD FLASH
BRASS
707 VAC
4.45
GLASS FILLED POLYBUTYLENE TEREPHTHALATE POLYETHYLENE
0.09
100
-50 Cel
1.98
MIL; UL
.189 inch
26
0.28
638-015-630-047
The Edac 638-015-630-047 is a D-sub connector with a mating contact pitch of 0.09 inches, insulation resistance of 1G ohm, and a body length of 1.213 inches. It is commonly used in applications requiring reliable signal transmission and board mounting options.
1.213 inch
GOLD (30)
STANDOFF
638-015-630-041
Edac D-Sub Connector 638-015-630-041 has Mating Contact Pitch of 0.09", Insulation Resistance of 1Gohm, and Dielectric Withstanding Voltage of 707VAC. Ideal for board and panel mounting applications requiring a reliable female connector with 15 contacts in a straight shell style.
180-M44-213R001
Norcomp Interconnect Devices
Norcomp's 180-M44-213R001 D-Sub Connector features a Mating Contact Pitch of 0.090", Insulation Resistance of 5000000000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board mounting applications in electronics, this connector has a temperature range from -55 to 125 °C and UL Flammability Code of 94V-0.
HOLE 0.126
.492 inch
.226 inch
2.089 inch
Gold Flash (Au)
10 mohm
POLYAMIDE9T
0.090
HOLE 0.12
2.28
44
170-037-273L020
Norcomp's 170-037-273L020 D-Sub Connector features 37 contacts, gold finish, and 5A power rating. With a body length of 2.728", it is ideal for cable mounting applications in temperatures ranging from -50 to 100°C. The connector's polybutylene terephthalate insulator ensures high insulation resistance of 1Gohm.
.196 inch
2.728 inch
POLYBUTYLENE TEREPHTHALATE
HOLE 0.236
.272 inch
170-037-273L010
The Norcomp Interconnect Devices 170-037-273L010 D-Sub Connector has a Mating Contact Pitch of 0.109", Insulation Resistance of 1G ohm, and Rated Current of 5A. It is used in applications requiring a reliable female connector with gold finish, UL certification, and operating temperatures ranging from -50°C to 100°C.
HOLE 0.098
170-015-272L000
Norcomp's 170-015-272L000 D-Sub Connector features 15 contacts, 2 rows, and a mating contact pitch of 0.109". With a rated current of 5A, it is ideal for cable mounting applications in temperatures ranging from -50 to 100°C. The connector boasts an insulation resistance of 1Gohm and a shell made of steel with TIN finish.
170-037-272L000
Norcomp's 170-037-272L000 D-Sub Connector has a mating contact pitch of 0.109", insulation resistance of 1Gohm, and rated current of 5A. Ideal for cable mounting applications, this connector features a steel shell with crimp termination and female contacts in UL black insulator.
DD15M10000
DD15M10000 by Positronic Industries is a D-Sub Connector with dimensions 1.213" x 0.494" x 0.375". Featuring Gold Flash (Au) - Nickel (Ni) termination, it has 15 contacts in a single row for panel mounting applications. The connector is UL certified with a blue insulator and steel shell, suitable for various electronic devices.
STANDARD: MIL-DTL-24308; MIL-C-39029, POLARIZED, COMPATIBLE CONTACTS: MC8022DCH; MC8022DAL
MACHINED
Gold Flash (Au) - with Nickel (Ni) barrier
BLUE
GLASS FILLED POLYESTER
1-745494-8
TE Connectivity 1-745494-8 D-Sub Connector features 15 contacts, matte tin finish, and EMI shielding. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring reliable signal transmission in discrete or round cable types. The connector has a male contact gender and plug body style for easy straight mounting with IDC termination.
.604 inch
1.556 inch
1.3622
.06 inch
2.4A
INSERT
2.4 A
1.3344
MWDM1L-51-2P-6K7-18B
MWDM1L-51-2P-6K7-18B by Glenair is a D-sub connector with 51 contacts, gold-plated Beryllium Copper pins, and MIL conformity. It has a mating contact pitch of 0.1", insulation resistance of 5Gohm, and can operate b/w -55 to 150°C. Ideal for applications requiring durable connectors with high current signal ratings in harsh environments.
.31 inch
1.835 inch
Gold (Au) - with Nickel (Ni) barrier
BERYLLIUM COPPER
.04 inch
0.1
HOLE 0.096
WITH CABLE ASSEMBLY
18 inch
0.139
MWDM2L-100S-6J7-18P
The Glenair MWDM2L-100S-6J7-18P D-sub connector features 100 contacts, gold-plated copper alloy material, and a 0.1" mating contact pitch. With a temperature range of -55 to 150°C, it is ideal for military applications requiring durability and high insulation resistance up to 5Gohm. The connector's crimp termination type and aluminum alloy shell make it suitable for cable mounting in harsh environments.
.394 inch
.234 inch
2.17 inch
.034 inch
JACKPOST
4
H
MWDM2L-15P-6J7-18B
MWDM2L-15P-6J7-18B by Glenair is a D-sub connector with 15 contacts, gold-plated Beryllium Copper material, and MIL conformity. It has a mating contact pitch of 0.1", insulation resistance of 5Gohm, and can operate b/w -55 to 150°C. Ideal for applications requiring durable connectors with high current signal ratings in aerospace or military equipment.
.935 inch
MWDM2L-15P-6K7-18B
Glenair's MWDM2L-15P-6K7-18B D-Sub Connector features 15 contacts, gold-plated with nickel barrier. With a mating contact pitch of 0.1", it offers high insulation resistance of 5Gohm and withstands up to 600VAC. Ideal for applications requiring durable connectors in harsh environments with operating temperatures ranging from -55°C to 150°C.
MWDM2L-15P-6K7-18M
The Glenair MWDM2L-15P-6K7-18M D-Sub Connector features 15 contacts, gold-plated with nickel barrier, rated at 3A signal current. With a mating contact pitch of 0.1", it is MIL conformant and operates b/w -55°C to 150°C. Ideal for cable mounting applications requiring durability up to 500 cycles.
MWDM2L-15P-6K7-18S1
MWDM2L-15P-6K7-18S1 by Glenair is a D-sub connector with 15 contacts, gold-plated Beryllium Copper material, and MIL conformity. It has a mating contact pitch of 0.1", insulation resistance of 5Gohm, and can operate in temperatures ranging from -55 to 150°C. Ideal for cable mounting applications requiring durability and high current signal ratings up to 3A.
MWDM2L-15S-4J7-18M
MWDM2L-15S-4J7-18M by Glenair is a D-sub connector with 15 contacts, rated for 3A signal current. Featuring gold-over-nickel mating contact finish and copper alloy material, it has a durability of 500 cycles. With a temperature range from -55 to 150°C, it is ideal for cable mounting applications requiring high insulation resistance and MIL conformity.
.037 inch
MWDM2L-15S-4K7-18B
D MICROMINIATURE CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Termination Type: CRIMP;
.045 inch
© 2023 All rights reserved
