Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Electrical wires and cables are conductive materials that are used to transmit electrical power and signals from one location to another. They are an essential component of any electrical system, ranging from small electronic devices to large industrial installations.Electrical wires are typically made of a conductive material, such as copper or aluminum, that is coated in an insulating material to prevent electrical leakage or short-circuits. They are available in various gauges and thicknesses to handle different levels of electrical current and resistance.Cables, on the other hand, are bundles of two or more electrical wires that are wrapped in an outer jacket for protection and insulation. They are designed for specific purposes, such as transmitting high-speed data, audio, or video signals, and can be shielded or unshielded to reduce electromagnetic interference.Both electrical wires and cables are critical components of modern electrical systems and are used in a wide range of applications, including residential and commercial buildings, automotive and aerospace industries, telecommunications, and more.
Add filters
All
Selected
830090061000
Belden
Belden 830090061000 is a stranded electrical wire with silver finish, rated for 600V. Featuring TETRAFLUOROETHYLENE insulator, it operates b/w -70 to 200 °C. Ideal for applications requiring flexibility and fixture wiring, it has a cross section area of 0.823 mm2 and can handle up to 9.2A current.
STANDARD: MIL-W-16878/4
MIL; NEMA; UL
SILVER
COPPER ALLOY
WIRE AND CABLE
STRANDED
.823 mm2
NO
1.727 mm
TETRAFLUOROETHYLENE
304.8 mm
YES
1
200 Cel
-70 Cel
9.2 A
600 V
.019 ohm
19X30
18
FLEXIBLE CORD AND FIXTURE WIRE
83009002100
Belden 83009002100 is a flexible cord and fixture wire with stranded construction, silver finish copper conductor, and TFE insulator. It has approvals from CE, MIL, NEMA, and UL for use in applications requiring a rated voltage of 600V. With a temperature range of -70 to 200 °C, it is suitable for various electrical wiring needs.
CE; MIL; NEMA; UL
COPPER
1.73 mm
TFE
82620101000
Belden 82620101000 is a CE, MIL, and UL approved communication cable with tinned copper conductor. It has a rated voltage of 1400V, polyvinyl chloride jacket material, and operates b/w -40 to 85°C. Ideal for applications requiring shielding and MIL conformity in electrical wiring setups.
STANDARD: MIL-C-17, RG58C/U
CE; MIL; UL
TINNED COPPER
4.953 mm
POLYETHYLENE
POLYVINYL CHLORIDE
85 Cel
-40 Cel
1400 V
.035 ohm
19X33
20
COMMUNICATION CABLE
830080061000
Belden 830080061000 is a flexible cord with stranded construction, rated at 600V. Featuring silver conductor finish and TETRAFLUOROETHYLENE insulator material, it conforms to MIL standards. Ideal for applications requiring high flexibility and resistance to extreme temperatures up to 105°C.
.518 mm2
1.473 mm
105 Cel
7X28
830000101000
Belden 830000101000 is a stranded copper alloy wire with silver finish, rated at 600V and 1.3A. Featuring TETRAFLUOROETHYLENE insulation, it has NEMA and UL approvals for applications requiring flexibility and high temperature resistance up to 105°C. Ideal for electrical fixtures and cords due to its 7X38 stranding and 0.0509 mm2 cross section area.
NEMA; UL
.0509 mm2
.812 mm
1.3 A
7X38
30
8259010U500
WIRE AND CABLE;
8168060100
82180101000
Belden 82180101000 is a UL-approved communication cable with stranded construction, PVC jacket, and shielded design. Featuring bare copper conductor, it has a cross-section area of 0.102 mm2 and operates b/w -40 to 60 °C. Ideal for applications requiring reliable data transmission in various environments.
UL
BARE COPPER
.102 mm2
3.81 mm
60 Cel
30 V
.394 ohm
7X35
27
83030006100
Belden 83030006100 is a stranded wire with silver finish, rated at 300V. With TETRAFLUOROETHYLENE insulator and copper conductor, it has a cross section area of 1.31 mm2. Ideal for applications requiring flexibility and fixture wiring, it has a max operating temperature of 200°C and approvals from MIL, NEMA, and UL.
STANDARD: MIL-W-16878/5
1.31 mm2
2.235 mm
30.48 mm
13 A
300 V
.0131 ohm
19X29
16
8168060500
83008004100
Belden 83008004100 is a stranded electrical wire with silver finish, rated for 600V. Featuring TETRAFLUOROETHYLENE insulator and MIL conformity, it has a max operating temp of 105°C. Ideal for applications requiring flexible cord and fixture wire with high temperature resistance.
83005001100
Belden 83005001100 is a stranded wire with silver finish, rated at 600V. With TETRAFLUOROETHYLENE insulator and copper alloy conductor, it has a cross section area of 0.326 mm2. Ideal for applications requiring flexibility, it is approved by MIL, NEMA, and UL standards.
MIL, NEMA, UL
.326 mm2
1.27 mm
4.5 A
.05 ohm
7X30
22
8259010500
9983002100
Belden 9983002100 is a stranded wire with PVC insulation, rated for 600V. With approvals from CE, CSA, and UL, it's ideal for flexible cord and fixture wire applications. Featuring copper alloy conductor material, it has a cross-section area of 0.326 mm2 and can handle up to 10A current.
CE; CSA; UL
80 Cel
-20 Cel
10 A
.021 ohm
9987009100
9982013100
Belden 9982013100 is a CSA/UL approved stranded wire with PVC insulation, rated at 300V and 80°C. Featuring copper alloy conductor, it's a flexible cord & fixture wire with 20 AWG and 7X28 stranding for various electrical applications.
CSA; UL
1.447 mm
99810101000
Belden 99810101000 is a stranded copper alloy wire with PVC insulation, rated for 300V. With approvals from CSA and UL, it's ideal for electrical applications requiring flexibility and durability. Featuring a cross-section area of 0.823 mm2, this wire is suitable for use in flexible cords and fixture wiring.
1.676 mm
9983009100
Belden 9983009100 is a stranded copper alloy wire with PVC insulation, rated for 600V and 10A. With approvals from CE, CSA, and UL, it's ideal for flexible cord and fixture wire applications due to its temperature range of -20 to 80°C and AWG 22 gauge size.
85200101000
Belden 85200101000 is a stranded wire with 1000V rating, suitable for MIL and UL applications. Featuring tinned copper conductor, PVC insulation, and 2.08mm² cross-section area, it's ideal for flexible cord and fixture wiring at temperatures up to 80°C.
STANDARD: MIL-W-76C
MIL; UL
2.08 mm2
2.819 mm
1000 V
41X30
14
8502002100
Belden 8502002100 is a MIL-W-16878/1 approved stranded wire with PVC insulation, rated for 600V and -40 to 105°C. Featuring 20 AWG copper alloy conductor, it has a 0.518 mm2 cross-section area and is ideal for flexible cord and fixture wire applications.
MIL-W-16878/1
14 A
.0311 ohm
87600601000
Belden 87600601000 is a flexible cord with 2 conductors, rated at 300V and 7.2A. Constructed with twisted copper conductors, PVC jacket, and shielding for CE, NEC, UL approvals. Ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20 to 60°C.
CE; NEC; UL
TIN
TWISTED
5.639 mm
PO
2
7.2 A
16X30
886410021000
Belden 886410021000 is a CSA, ISO/IEC, UL approved communication cable with stranded construction and FEP jacket. Featuring tinned copper conductor, it has 2 conductors rated at 300V and 2.2A for applications requiring shielding in temperatures ranging from -70 to 200°C.
CSA; ISO/IEC; UL
2.692 mm
FEP
2.2 A
.079 ohm
7X32
24
85020151000
Belden 85020151000 is a stranded copper alloy wire with PVC insulation, rated for 600V and MIL-W-16878/1 compliant. With a temperature range of -40 to 105 °C, it's ideal for applications requiring flexibility like flexible cords and fixture wires. It has a cross-section area of 0.518 mm2 and can handle up to 14A current.
8777060U500
Belden 8777060U500 is a CE, CEC, CUL, NEC, UL approved communication cable with stranded construction and PVC jacket. Featuring tinned copper conductor material and PP insulator for 300V rated voltage. Ideal for applications requiring -20 to 80 °C operating temperature range.
CE; CEC; CUL; NEC; UL
6.93 mm
PP
152.4 mm
6
2 A
.049 ohm
8762060U500
Belden 8762060U500 is a stranded communication cable with PVC jacket, tinned copper conductor, and shielding. It has approvals from CEC, CUL, NEC, and UL for use in various applications. With a rated voltage of 300V and operating temperature range of -20 to 60°C, it is suitable for electrical wiring needs.
CEC; CUL; NEC; UL
5.182 mm
PE
152 mm
3.9 A
.031 ohm
8770060500
Belden 8770060500 is a stranded communication cable with PVC jacket, tinned copper conductor, and PE insulator. It has approvals from CEC, CUL, NEC, and UL for use in various electrical applications. With a rated voltage of 300V and max operating temperature of 60°C, it is suitable for installations requiring reliable signal transmission.
6.248 mm
3
5.3 A
.022 ohm
8471060500
88641002500
Belden 88641002500 is a CSA, ISO/IEC, UL approved communication cable with stranded construction and FEP jacket material. Featuring tinned copper conductor, it has a rated voltage of 300V and can operate b/w -70 to 200 °C. Ideal for applications requiring shielding and high resistance at 2.2A current rating.
8771060U1000
Belden 8771060U1000 is a UL-approved stranded cable with PVC jacket, suitable for communication and control applications. Featuring tinned copper conductors, it has a rated voltage of 300V and can operate b/w -20°C to 60°C. With shielding and 3 conductors, it offers low resistance at 0.049 ohm for currents up to 2.9A.
5.055 mm
2.9 A
COMMUNICATION AND CONTROL CABLE
85210161000
Belden 85210161000 is a MIL-W-76C approved stranded wire with PVC insulation. Featuring 16 AWG copper alloy conductor, it has a diameter of 2.49mm and can operate b/w -40 to 80°C. Ideal for applications requiring a flexible cord and fixture wire with a rated current of 22A and resistance of 0.012 ohm.
MIL-W-76C
2.49 mm
22 A
.012 ohm
26X30
87710601000
Belden 87710601000 is a UL-approved stranded cable with PVC jacket, suitable for communication and control applications. Featuring tinned copper conductors, it has a rated voltage of 300V and can operate b/w -20 to 60°C. With 3 conductors at AWG 22 gauge, this cable offers shielding and resistance of 0.049 ohm for reliable performance.
8444060100
Belden 8444060100 is a stranded PVC cable with 4 conductors, rated for 300V and 2.4A current. It has CE, CSA, UL approvals and is ideal for communication & control applications due to its tinned copper conductor and PVC insulation. Operating temperature range: -20 to 80°C.
CE; CEC; CSA; CUL; NEC; UL
4.699 mm
4
2.4 A
.051 ohm
8520010100
Belden 8520010100 is a stranded wire with tinned copper conductor, rated at 1000V. With MIL and UL approvals, it's ideal for applications requiring flexibility and durability in electrical wiring up to 80°C. Featuring a cross-section area of 2.08mm², this PVC-insulated wire is suitable for various industrial uses.
8523005100
Belden 8523005100 is a stranded wire with 1000V rating, PVC insulation, and tinned copper conductor. It has a diameter of 1.78mm, length of 30.48mm, and stranding of 10X30. Suitable for applications requiring flexibility such as flexible cords and fixture wires with a rated current of 12A.
STANDARD: MIL-W-76C; UL
1.78 mm
12 A
.029 ohm
10X30
84670601000
85210171000
Belden 85210171000 is a MIL-W-76C approved stranded wire with PVC insulation. Featuring 16 AWG copper alloy conductor, it has a diameter of 2.49mm and length of 304.8mm. With a rated current of 22A, it's ideal for applications requiring flexible cord and fixture wire in temperatures ranging from -40 to 80°C.
85020021000
Belden 85020021000 is a MIL-W-16878/1 approved stranded wire with PVC insulation, rated for 600V and temperatures from -40 to 105°C. Featuring copper alloy conductor, it has a cross section area of 0.518 mm2, suitable for applications requiring flexible cord and fixture wire with a rated current of 14A.
8521011100
Belden 8521011100 is a MIL-W-76C approved stranded wire with PVC insulation. Featuring 16 AWG copper alloy conductor, it has a cross-section area of 1.31 mm2 and can handle up to 22A current. Ideal for applications requiring flexible cord and fixture wire in temperatures ranging from -40°C to 80°C.
88641002100
Belden 88641002100 is a CSA, ISO/IEC, UL approved communication cable with stranded construction and FEP jacket material. Featuring tinned copper conductor, it has 2 conductors rated at 300V and 2.2A for applications requiring shielding and operating temperatures from -70 to 200°C.
8424010U500
Belden 8424010U500 is a flexible cord with 4 conductors, tinned copper construction, and EPDM insulation. It has a voltage rating of 600V, shielding for protection, and operates b/w -50 to 90°C. Ideal for electrical applications requiring flexibility and durability in harsh environments.
7.468 mm
EPDM
90 Cel
-50 Cel
3.2 A
.033 ohm
26X34
83048010100
830480101000
84240101000
Belden 84240101000 is a stranded, shielded wire with EPDM jacket & insulator. Featuring tinned copper conductor, it has 4 conductors rated at 600V and 3.2A for flexible cord and fixture applications in temperatures ranging from -50 to 90°C.
8424010100
Belden 8424010100 is a stranded, shielded cable with EPDM jacket for electrical applications. Featuring tinned copper conductors, it has a rated voltage of 600V and can handle temperatures from -50 to 90°C. Ideal for flexible cord and fixture wire installations requiring high resistance (0.033 ohm) and current capacity (3.2A).
8424010250
Belden 8424010250 is a stranded electrical wire with EPDM jacket and shielding. It has a rated voltage of 600V, max operating temperature of 90°C, and min operating temperature of -50°C. This flexible cord and fixture wire is suitable for various applications requiring reliable electrical connections.
76.2 mm
83319E009500
Belden 83319E009500 is a flexible cord with TFE jacket, suitable for applications requiring 600V. With stranded construction and copper conductor, it offers low resistance of 0.048 ohm. Ideal for use in environments ranging from -65 to 200 °C, meeting MIL standards.
CE; MIL-W-16878/4; NEMA HP-3; UL
3.63 mm
-65 Cel
5 A
.048 ohm
19X34
83319E009100
Belden 83319E009100 is a stranded copper wire with TFE insulation, rated for 600V. With approvals like CE and UL, it's ideal for applications requiring flexibility and shielding in temperatures ranging from -65 to 200°C. This flexible cord and fixture wire has a diameter of 3.63mm and can handle up to 5A current.
83319E0091000
© 2023 All rights reserved
