Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ADA4610-1BRZ
Analog Devices
ADA4610-1BRZ by Analog Devices is an Operational Amplifier with 800uV Max Input Offset Voltage, 86dB CMRR, and 15400kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
Operational Amplifier
BIPOLAR
1
Operational Amplifiers
15.4 MHz
86 dB
800 uV
21 V/us
1.5 nA
5 V
18 V
-5 V
-18 V
-40 °C (-40 °F)
125 °C (257 °F)
260 °C (500 °F)
30 s
0.193 in (4.9 mm)
0.154 in (3.9 mm)
0.069 in (1.75 mm)
8
0.05 in (1.27 mm)
Dual
Gull Wing
Matte Tin
Plastic/Epoxy
Yes
Automotive
R-PDSO-G8
e3
SOP
Rectangular
Small Outline
ADA4610-4ACPZ-RL
ADA4610-4ACPZ-RL by Analog Devices is a quad operational amplifier with 1800uV max input offset voltage, 86dB CMRR, and 15400kHz unity gain bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and low bias current of 0.0015uA.
4
1800 uV
0.157 in (4 mm)
0.031 in (0.8 mm)
16
0.026 in (0.65 mm)
Quad
No Lead
3
S-PQCC-N16
Tape And Reel
HVQCCN
Square
Chip Carrier, Heat Sink/Slug, Very Thin Profile
ADA4084-4ARUZ
ADA4084-4ARUZ by Analog Devices is a quad operational amplifier with 250uV max input offset voltage, 70dB nominal CMRR, and 15900kHz unity gain bandwidth. Ideal for automotive applications due to its low-offset, -40 to 125 °C operating temp range, and VFB architecture.
Voltage Feedback
±1.5/±15/3/30 V
No
15.9 MHz
70 dB
250 uV
70800
3.7 V/us
400 nA
250 nA
2.1 mA
0.197 in (5 mm)
0.173 in (4.4 mm)
0.047 in (1.2 mm)
14
R-PDSO-G14
Tube
TSSOP
Small Outline, Thin Profile, Shrink Pitch
TSSOP14,.25
ADA4084-1ARZ-R7
ADA4084-1ARZ-R7 by Analog Devices is an Operational Amplifier with 200uV Max Input Offset Voltage, 70dB CMRR, and 15900kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
200 uV
ADA4177-1ARZ-RL
ADA4177-1ARZ-RL by Analog Devices is a small outline operational amplifier with a max input offset voltage of 120 uV and a nominal common mode reject ratio of 120 dB. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
3.5 MHz
120 dB
120 uV
1.5 V/us
2 nA
ADA4177-4ARUZ-RL
ADA4177-4ARUZ-RL by Analog Devices is a 4-function Op Amp with 300uV max input offset voltage, 120dB CMRR, and 3500kHz unity gain bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temp range and thin profile package style.
300 uV
ADA4177-4ARZ
ADA4177-4ARZ by Analog Devices is a 4-function Op Amp with 300uV max input offset voltage, 120dB CMRR, and 3500kHz unity gain bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temp range and small outline package style.
NCV5652MUTWG
Onsemi
NCV5652MUTWG by Onsemi is a dual operational amplifier with 100dB CMRR, 350kHz bandwidth, and 1uA bias current. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 125°C with a supply voltage of 5V. The small outline package has a low profile and matte tin finish for surface mount assembly.
2
350 kHz
100 dB
15000 uV
1 uA
16 V
0.118 in (3 mm)
0.022 in (0.55 mm)
12
0.02 in (0.5 mm)
AEC-Q100
S-PDSO-N12
HVSON
Small Outline, Heat Sink/Slug, Very Thin Profile
INA250A1PW
Texas Instruments
The Texas Instruments INA250A1PW is an operational amplifier with a 50 kHz bandwidth and 100 dB common mode reject ratio. Ideal for automotive applications, it operates b/w -40 to 125°C, with a max common mode voltage of 36V. The package is small outline, thin profile, and surface-mountable.
50 kHz
36 V
Nickel Palladium Gold
R-PDSO-G16
e4
TLC2274EPWRQ1
TLC2274EPWRQ1 by Texas Instruments is a CMOS Operational Amplifier with 4 functions, 2500uV max input offset voltage, and 75dB common mode reject ratio. Ideal for automotive applications due to AEC-Q100 screening level and low-bias design. Operates at -40 to 150 °C with 5V supply voltage.
CMOS
2.18 MHz
75 dB
2500 uV
10000
1.2 V/us
3.6 V/us
60 pA
7 nA
8 V
-8 V
150 °C (302 °F)
6 mA
INA283AQDRQ1
Texas Instruments' INA283AQDRQ1 is an automotive-grade operational amplifier with 70uV max input offset voltage and 10kHz unity gain bandwidth. Ideal for applications requiring high common mode rejection ratio of 120dB, such as automotive sensor interfaces.
10 kHz
80 V
70 uV
200
0.2 V/us
INA284AIDGKT
Texas Instruments' INA284AIDGKT is an Operational Amplifier with 70uV Max Input Offset Voltage, 140dB Nominal CMRR, and 5V Supply Voltage. Ideal for automotive applications due to its -40 to 125°C operating temp range and 80V Max CM voltage. Package: SOIC-8, Surface Mount.
4 kHz
140 dB
500
0.042 in (1.07 mm)
Nickel Palladium Gold Silver
S-PDSO-G8
INA285AIDGKR
Texas Instruments' INA285AIDGKR is an operational amplifier with 70uV max input offset voltage, 140dB CMRR, and 2kHz unity gain bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temperature range and 80V common mode voltage tolerance. This Op Amp features a small outline package with dual terminals and a thin profile for space-constrained designs.
2 kHz
1000
INA285AIDGKT
Texas Instruments' INA285AIDGKT is an operational amplifier with 70uV max input offset voltage, 140dB CMRR, and 2kHz unity gain bandwidth. Ideal for automotive applications due to its compact square package and wide operating temperature range of -40 to 125°C.
INA286AIDGKT
Texas Instruments' INA286AIDGKT is an Operational Amplifier with 70uV Max Input Offset Voltage, 140dB CMRR, and 10kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temp range and 80V Max Common Mode Voltage. It comes in a small outline package with dual terminals and Gull Wing form.
100
LMP8640QMKX-T/NOPB
LMP8640QMKX-T/NOPB by Texas Instruments is an Operational Amplifier with a max input offset voltage of 1160 uV, bias current of 28 uA, and common mode reject ratio of 103 dB. Ideal for automotive applications due to AEC-Q100 screening level, it operates b/w -40 to 125 °C with micropower consumption and frequency compensation.
950 kHz
42 V
103 dB
60 dB
1160 uV
20
1.6 V/us
28 uA
21 uA
13.2 V
0.114 in (2.9 mm)
0.063 in (1.6 mm)
0.043 in (1.1 mm)
6
0.037 in (0.95 mm)
R-PDSO-G6
TSOP
Small Outline, Thin Profile
LPV542DGKT
LPV542DGKT by Texas Instruments is a dual operational amplifier with micropower consumption. It features a max input offset voltage of 4000 uV, nominal voltage of 1.8 V, and low-bias current of 0.000001 uA. Ideal for automotive applications due to its small outline package and wide temperature range.
7 kHz
101 dB
73 dB
4000 uV
35481.339
0.0037 V/us
1 pA
1.8 V
6 V
1.7 μA
Nickel/Palladium/Gold/Silver
OPA2625IDGSR
OPA2625IDGSR by Texas Instruments is a voltage-feedback operational amplifier with 100uV max input offset voltage, 6.5uA max average bias current, and 117dB nominal CMRR. Ideal for automotive applications due to its small outline package and wideband capabilities.
120 MHz
117 dB
100 uV
316227.766
115 V/us
120 nA
6.5 uA
4 uA
6.2 mA
10
S-PDSO-G10
SSOP10,.20,20
OPA2625IDGST
OPA2625IDGST by Texas Instruments is a dual operational amplifier with 100uV max input offset voltage and 6.5uA max average bias current. It has a nominal voltage of 5V, making it suitable for automotive applications requiring high precision and low power consumption in a compact package. With features like 117dB CMRR and 120000kHz unity gain bandwidth, it is ideal for wideband signal processing in harsh environments.
316227
ADA4530-1ARZ-RL
ADA4530-1ARZ-RL by Analog Devices is an Operational Amplifier with 300uV Max Input Offset Voltage, 114dB CMRR, and 2000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
2 MHz
114 dB
1.4 V/us
0.25 pA
17 V
MCP6V62T-E/MNY
Microchip Technology
MCP6V62T-E/MNY by Microchip Tech is a CMOS Op Amp with low-offset and low-bias features. With 8 uV max input offset voltage, it operates at -40 to 125 °C, ideal for automotive applications. This dual-function amplifier has a nominal unity gain bandwidth of 1000 kHz and consumes only 0.26 mA max supply current.
1 MHz
134 dB
8 uV
1778279
0.45 V/us
50 pA
6.5 V
40 s
260 μA
0.079 in (2 mm)
TS 16949
R-PDSO-N8
SOLCC8,.08,20
MCP6V64-E/ST
MCP6V64-E/ST by Microchip is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 8 uV, nominal unity gain bandwidth of 1000 kHz, and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to its micropower consumption and high common mode reject ratio.
520 μA
MCP6V74-E/ST
MCP6V74-E/ST by Microchip: 8uV Max Input Offset Voltage, 130dB Nominal CMRR, 2000kHz Unity Gain BW. Ideal for automotive applications due to low bias current and micropower tech in a small outline package.
130 dB
707950
1 V/us
1.04 mA
ADA4622-2ARZ-RL
ADA4622-2ARZ-RL by Analog Devices is a dual operational amplifier with 2000uV max input offset voltage and 100dB nominal CMRR. Ideal for automotive applications, it operates b/w -40 to 125 °C with a unity gain bandwidth of 7000 kHz. This small outline package op amp has a max supply voltage of +/-18V and low bias current of 0.0015uA.
7 MHz
2000 uV
23 V/us
15 V
-15 V
ADA4622-2BRZ
ADA4622-2BRZ by Analog Devices is an Operational Amplifier with 800uV Max Input Offset Voltage, 100dB CMRR, and 7000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temp range and small outline package style.
INA301A3IDGKT
Texas Instruments' INA301A3IDGKT is an operational amplifier with 120 dB CMRR and 35 uV max input offset voltage. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 5 V. With a small outline package and dual terminals, it offers high precision in compact designs.
450 kHz
35 uV
4 V/us
OPA1622IDRCT
OPA1622IDRCT by Texas Instruments is a dual operational amplifier with low offset voltage of 500uV and bias current of 2.2uA, ideal for automotive applications. Featuring a unity gain bandwidth of 32MHz, it operates at temperatures ranging from -40 to 125°C and has a compact square package suitable for surface mount assembly.
32 MHz
127 dB
110 dB
500 uV
1000000
10 V/us
80 nA
2.2 uA
2 uA
20 V
-20 V
0.039 in (1 mm)
Nickel/Palladium/Gold
S-PDSO-N10
OPA191ID
OPA191ID by Texas Instruments is an Operational Amplifier with 250uV Max Input Offset Voltage, 110dB Nominal CMRR, and 2200kHz Unity Gain Bandwidth. Ideal for automotive applications, it operates b/w -40 to 125°C and has a small outline package with dual terminals for surface mount assembly.
2.2 MHz
6.5 V/us
9 nA
20 pA
3 V
-3 V
200 μA
AD8544WARZ-RL
AD8544WARZ-RL by Analog Devices is a CMOS Operational Amplifier with 4 functions, low bias current (0.00006 uA @25C), and micropower feature. Ideal for automotive applications due to AEC-Q100 screening level, small outline package style, and wide temperature range (-40 to 125 °C).
2.7/5 V
980 kHz
45 dB
7000 uV
2000
0.4 V/us
0.8 V/us
1 nA
340 μA
0.341 in (8.65 mm)
SOP14,.25
TSV6392AILT
STMicroelectronics
TSV6392AILT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 2000 µV and a nominal voltage of 1.8 V. It features a high common mode reject ratio of 74 dB, making it ideal for automotive applications. Its compact size and low power consumption enhance performance in space-constrained designs.
74 dB
0.7 V/us
100 pA
0.064 in (1.625 mm)
0.057 in (1.45 mm)
LSSOP
Small Outline, Low Profile, Shrink Pitch
AD8216WYRZ-RL
AD8216WYRZ-RL by Analog Devices is an Op Amp with 3000uV Max Input Offset Voltage, 90dB CMRR, and 5V Supply Voltage. Ideal for automotive applications due to AEC-Q100 screening, it features a small outline package with dual terminals and operates b/w -40 °C to 125°C.
90 dB
3000 uV
15 V/us
12.5 V
2 mA
SOP8,.25
AD8216WYRZ
AD8216WYRZ by Analog Devices is an Operational Amplifier with 90 dB CMRR, 3000 uV max input offset voltage, and 2 mA max supply current. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 125 °C with a supply voltage of 5V.
TSB572IYQ2T
TSB572IYQ2T by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 2100 µV and an AEC-Q100 screening level, ideal for automotive applications. It features a nominal voltage of 12 V and operates from -40 °C to 125 °C. With a low bias current of just 0.07 µA, it ensures high precision in signal processing tasks.
BICMOS
2.4 MHz
106 dB
80 dB
2100 uV
56234
0.92 V/us
15 nA
70 nA
30 nA
12 V
40 V
1.1 mA
S-PDSO-N8
SOLCC8,.12,25
TSV632AIQ2T
TSV632AIQ2T from STMicroelectronics is a dual operational amplifier with a max input offset voltage of 2000 µV and operates on supplies from 1.8V to 5V. It features a low-bias current of just 10 nA, making it ideal for automotive applications. With a nominal gain bandwidth of 830 kHz, it's perfect for precision signal processing.
1.8/5 V
830 kHz
0.27 V/us
10 pA
144 μA
Matte Tin - annealed
SON
ADA4084-1ARJZ-R2
ADA4084-1ARJZ-R2 by Analog Devices is a low-offset operational amplifier with 250uV max input offset voltage, 124dB nominal CMRR, and 13.9MHz bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temp range and small outline package style.
13.9 MHz
15.9 kHz
124 dB
76 dB
398107
2.4 V/us
50 nA
1 mA
5
R-PDSO-G5
TSOP5,.11,37
ADA4084-1ARJZ-RL
ADA4084-1ARJZ-RL by Analog Devices is a low-offset operational amplifier with 250uV max input offset voltage, 124dB nominal CMRR, and 13.9MHz bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temperature range and small outline package style.
ADA4622-2ACPZ-RL
ADA4622-2ACPZ-RL by Analog Devices is an Operational Amplifier with 2000uV Max Input Offset Voltage, 91dB Nominal CMRR, and 7800kHz Unity Gain Bandwidth. Ideal for automotive applications due to -40 to 125 °C operating temp range and small outline package style.
7.8 MHz
91 dB
VSON
Small Outline, Very Thin Profile
MCP6V82-E/MS
MCP6V82-E/MS by Microchip Technology is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 9uV, nominal unity gain bandwidth of 5000 kHz, and operates in automotive temperature grade. Ideal for applications requiring micropower consumption and high common mode rejection ratio.
5 MHz
136 dB
118 dB
9 uV
1995262
2.2 V
1.54 mA
TSSOP8,.19
MCP6V84-E/ST
MCP6V84-E/ST by Microchip Technology is a CMOS Operational Amplifier with low-offset and low-bias features. It offers a max input offset voltage of 9 uV, nominal unity gain bandwidth of 5000 kHz, and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to its micropower consumption and high common mode reject ratio.
3.08 mA
OPA191IDGKT
OPA191IDGKT by Texas Instruments is an operational amplifier with a max input offset voltage of 250uV and a nominal unity gain bandwidth of 2200kHz. It is ideal for automotive applications due to its temperature grade, low bias current (IIB) of 0.009uA, and small outline package style.
104 dB
INA211BIRSWR
Texas Instruments' INA211BIRSWR is an Operational Amplifier with 35uV Max Input Offset Voltage and 140dB Nominal CMRR. Ideal for automotive applications, it operates b/w -40 to 125°C, has a supply voltage of 5V, and offers a unity gain bandwidth of 7kHz.
26 V
105 dB
35 uA
0.071 in (1.8 mm)
0.055 in (1.4 mm)
0.016 in (0.4 mm)
R-PQCC-N10
VQCCN
Chip Carrier, Very Thin Profile
INA211BIRSWT
Texas Instruments' INA211BIRSWT is an Operational Amplifier with 35uV Max Input Offset Voltage, 140dB CMRR, and 7kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package.
INA215BIDCKT
Texas Instruments' INA215BIDCKT is an Operational Amplifier with 60uV Max Input Offset Voltage, 140dB Nominal CMRR, and 40kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with a small outline package.
40 kHz
60 uV
75
0.049 in (1.25 mm)
INA215BIRSWR
Texas Instruments' INA215BIRSWR is an Operational Amplifier with 60uV Max Input Offset Voltage, 140dB Nominal CMRR, and 40kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact chip carrier package.
MCP6V94-E/ST
MCP6V94-E/ST by Microchip Technology is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 9uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for applications requiring precise signal amplification in compact spaces.
10 MHz
9.5 V/us
2.4 V
6.4 mA
INA199B3QDCKRQ1
Texas Instruments' INA199B3QDCKRQ1 is an Operational Amplifier with 120 dB CMRR and 150 uV max input offset voltage. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 5V. The package is small outline, thin profile, and surface mountable.
14 kHz
150 uV
28 V
INA211BQDCKRQ1
Texas Instruments' INA211BQDCKRQ1 is an Operational Amplifier with 35uV Max Input Offset Voltage, 140dB Nominal CMRR, and 7kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates in a wide temperature range from -40°C to 125°C.
INA214BQDCKRQ1
Texas Instruments' INA214BQDCKRQ1 is an Operational Amplifier with 140 dB CMRR, 30 kHz bandwidth, and 100 voltage gain. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 125°C with a supply voltage of 5V.
30 kHz
© 2023 All rights reserved
