Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ADCMP370AKS-REEL
Analog Devices
Analog Devices' ADCMP370AKS-REEL is a comparator with 9000uV max input offset voltage, 0.05uA max average bias current, and 5000ns nominal response time. Ideal for industrial applications, it operates b/w -40 to 85°C with a supply voltage of 2.5/5V in a small outline package.
Comparator
2.5/5 V
1
Comparators
Open-Drain
9 mV
50 nA
7 μA
6 V
-40 °C (-40 °F)
85 °C (185 °F)
5 µs
0.079 in (2 mm)
0.049 in (1.25 mm)
0.043 in (1.1 mm)
5
0.026 in (0.65 mm)
Dual
Gull Wing
Tin/Lead (Sn85Pb15) - with Silver barrier
Plastic/Epoxy
Yes
Industrial
No
R-PDSO-G5
e0
Tape And Reel
TSSOP
Rectangular
Small Outline, Thin Profile, Shrink Pitch
TSSOP5/6,.08
ADCMP371AKS-REEL7
ADCMP371AKS-REEL7 by Analog Devices is a comparator with 9000uV max input offset voltage, 0.05uA max average bias current, and 5000ns nominal response time. It is used in industrial applications for precise signal comparison due to its push-pull output type and dual terminal position.
Push-Pull
Tin Lead Over Silver
Tape And Reel, 7 Inch
ADCMP371AKS-REEL
Analog Devices' ADCMP371AKS-REEL is a comparator with 9000uV max input offset voltage, 0.05uA max average bias current, and 5000ns nominal response time. Ideal for industrial applications requiring push-pull output type in a compact small outline package.
Tin Lead
ADCMP371AKSZ-REEL7
Analog Devices' ADCMP371AKSZ-REEL7 is a comparator with 9000uV max input offset voltage, 0.05uA max average bias current, and 5000ns nominal response time. Ideal for industrial applications requiring precise signal comparison in compact designs.
260 °C (500 °F)
Matte Tin
e3
ADCMP600BKSZ-RL
ADCMP600BKSZ-RL by Analog Devices is a comparator with 5uA bias current, 5000uV input offset voltage, and 5ns response time. Ideal for automotive applications due to its small outline, push-pull output, and -40 to 125°C operating temperature range.
BIPOLAR
3/5 V
5 mV
5 uA
125 °C (257 °F)
5 ns
Automotive
ADCMP600BRJZ-RL
ADCMP600BRJZ-RL by Analog Devices is a comparator with 5 uA bias current, 5000 uV input offset voltage, and 5 ns response time. Ideal for automotive applications due to its low profile design, push-pull output type, and operating temperature range of -40 to 125 °C.
0.114 in (2.9 mm)
0.063 in (1.6 mm)
0.057 in (1.45 mm)
0.037 in (0.95 mm)
LSSOP
Small Outline, Low Profile, Shrink Pitch
TSOP5/6,.11,37
ADCMP601BKSZ-RL
ADCMP601BKSZ-RL by Analog Devices is a comparator with 5000uV max input offset voltage and 5uA max average bias current. It operates at -40 to 125 °C, suitable for automotive applications. The small outline package has a thin profile, push-pull output type, and dual terminal position.
6
Nickel Palladium Gold
R-PDSO-G6
e4
TSSOP6,.08
MAX9961ALCCQ
Maxim Integrated
COMPARATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: HTFQFP; Package Shape: SQUARE;
2
Open-Collector
20 mV
25 uA
9.75 V
11.5 V
-5.25 V
-7 V
0 °C (32 °F)
70 °C (158 °F)
2.2 ns
0.551 in (14 mm)
0.047 in (1.2 mm)
100
0.02 in (0.5 mm)
Quad
3
Commercial
S-PQFP-G100
HTFQFP
Square
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch
MAX9961BDCCQ
100 mV
ADCMP604BKSZ-RL
Analog Devices' ADCMP604BKSZ-RL is a comparator with 5000uV max input offset voltage, 5uA max average bias current, and 3ns nominal response time. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C.
21 mA
2.5 V
3 ns
TLV3491AIDG4
Texas Instruments
TLV3491AIDG4 by Texas Instruments is a CMOS comparator with 15000 uV max input offset voltage, 0.00001 uA max average bias current, and 12000 ns nominal response time. Widely used in automotive applications due to its small outline package style and push-pull output type for precise signal comparisons.
CMOS
2/5 V
15 mV
10 pA
1.2 μA
5 V
5.5 V
12 µs
0.193 in (4.9 mm)
0.154 in (3.9 mm)
0.069 in (1.75 mm)
8
0.05 in (1.27 mm)
Nickel/Palladium/Gold
R-PDSO-G8
Tube
SOP
Small Outline
SOP8,.25
MAX913EUA-T
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
5/±5 V
3 mV
8 uA
10 mA
7 V
-5 V
10 ns
0.118 in (3 mm)
S-PDSO-G8
TSSOP8,.19
TLV3011AIDBVRG4
TLV3011AIDBVRG4 by Texas Instruments is a CMOS comparator with 12000 uV max input offset voltage and 0.00001 uA max average bias current. It operates at -40 to 125 °C, suitable for automotive applications. The small outline package has 6 terminals, open-drain output type, and requires a nominal voltage of 5 V.
12 mV
5 μA
TSOP6,.11,37
LMV331IDCKTG4
LMV331IDCKTG4 by Texas Instruments is a comparator with 9000uV max input offset voltage, 0.4uA max average bias current, and 600ns nominal response time. Ideal for automotive applications due to its small outline package style and -40 to 125 °C operating temperature range.
400 nA
250 nA
120 μA
600 ns
LM239ADRG4
LM239ADRG4 by Texas Instruments is a comparator with 4 functions, featuring a max input offset voltage of 3000 uV and max average bias current of 0.4 uA. It operates at temperatures ranging from -25 to 85 °C and is ideal for applications requiring open-collector output type in small outline packages.
4
2 mA
36 V
-25 °C (-13 °F)
30 s
1.3 µs
0.341 in (8.65 mm)
14
Other
R-PDSO-G14
SOP14,.24
LP211DRG4
LP211DRG4 by Texas Instruments is a comparator with a max input offset voltage of 7500 uV, max average bias current of 0.15 uA, and a nominal voltage of 15 V. It is commonly used in applications such as amplifiers and open-collector outputs.
±15 V
7.5 mV
150 nA
100 nA
300 μA
15 V
18 V
-15 V
-18 V
1.2 µs
TL712CDG4
TL712CDG4 by Texas Instruments is a comparator with 5000uV max input offset voltage, 600uA max average bias current, and 25ns nominal response time. Widely used in applications requiring precise signal comparison in commercial temperature environments.
600 uA
20 mA
25 ns
TLV3702CDGKG4
TLV3702CDGKG4 by Texas Instruments is a CMOS comparator with 2 functions, featuring a max input offset voltage of 7000 uV and max average bias current of 0.0015 uA. Ideal for applications requiring push-pull output type, it operates b/w -40 to 125 °C and has a small outline package style.
±1.25/±8/2.5/16 V
7 mV
1.5 nA
100 pA
1.6 μA
2.7 V
17 V
0 V
240 µs
INA209AIPW
INA209AIPW by Texas Instruments is a comparator with 16 terminals, Vsup of 3.3V, and max common mode voltage of 26V. It operates in automotive grade at -40 to 125 °C, with an open-collector output type suitable for various applications. The package style is small outline, thin profile, shrink pitch for compact designs.
5.5 kHz
120 dB
100 uV
26 V
1.5 mA
3.3 V
0.197 in (5 mm)
0.173 in (4.4 mm)
16
R-PDSO-G16
TLC372MDRG4
TLC372MDRG4 by Texas Instruments is a dual-function comparator with 10000 uV max input offset voltage and 0.02 uA max average bias current. Ideal for military applications, it operates at -55 to 125 °C with open-collector output type. Package style is small outline, surface mountable, and has 8 terminals in a rectangular shape.
10 mV
20 nA
30 pA
-55 °C (-67 °F)
650 ns
Military
MIL-STD-883
MAX9077EKA
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
2.1/5.5 V
8 mV
-20 nA
6.6 μA
580 ns
0.064 in (1.625 mm)
TSSOP8,.1
MAX9963BGCCQ-D
MAX9963BGCCQ-D by Maxim Integrated is a comparator with 100000 uV max input offset voltage, 25 uA max average bias current, and 9.75 V nominal voltage. It is used in applications requiring fast response time, open-collector output type, and -7 V to 11.5 V supply voltage range.
MAX9967BRCCQ-D
MXL1016IS8-T
COMPARATOR; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
3.5 mV
13 uA
-20 °C (-4 °F)
ADCMP608BKSZ-R2
ADCMP608BKSZ-R2 by Analog Devices is a CMOS comparator with 5000uV max input offset voltage and 0.4uA max average bias current. It operates at -40 to 125 °C, ideal for automotive applications due to its small outline package and low power consumption of 1.3mA.
1.3 mA
60 ns
ADCMP608BKSZ-RL
ADCMP608BKSZ-RL by Analog Devices is a CMOS comparator with a response time of 60 ns, ideal for automotive applications. It features a max input offset voltage of 5000 uV and low bias current of 0.4 uA, making it suitable for precision signal processing in compact designs. With a small outline package style and surface mount capability, this comparator offers high performance in tight spaces.
TSM109AIDT
STMicroelectronics
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
105 °C (221 °F)
TSM109AID
TSM109AID by STMicroelectronics is a dual comparator with a max input offset voltage of 9mV and operates within -40 °C to 105°C. It features low bias current at 0.4µA and supports supply voltages up to 36V, ideal for industrial applications. Its compact SO8 package ensures efficient surface mounting.
TSM109IDT
TSM109ID
TSM109ID by STMicroelectronics is a dual comparator with a max input offset voltage of 9 mV and operates within -40 °C to 105°C. It features low bias current of 0.4 µA and supports supply voltages up to 36 V, ideal for industrial applications. Its compact SO8 package ensures efficient space utilization in designs.
ADCMP609BRMZ-REEL
Analog Devices' ADCMP609BRMZ-REEL is a comparator with 5000uV max input offset voltage, 0.4uA max average bias current, and 2.5V nominal voltage. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125 °C.
1.1 mA
ADCMP609BRMZ
Analog Devices' ADCMP609BRMZ is a comparator with 5000uV max input offset voltage, 0.4uA max average bias current, and 2.5V nominal voltage. Ideal for automotive applications due to its small outline package style and -40 to 125 °C operating temperature range.
INA209AIPWG4
Texas Instruments' INA209AIPWG4 is a comparator with 16 terminals, operating at -40 to 125 °C. It has a max input offset voltage of 200 uV and nominal voltage of 3.3 V. Widely used in automotive applications due to its small outline package style and open-collector output type.
200 uV
LMV339IPWRG4
LMV339IPWRG4 by Texas Instruments is a comparator with 4 functions, operating at -40 to 125 °C. It has a max input offset voltage of 9000 uV and bias current of 0.25 uA @25C. Ideal for automotive applications due to its small outline package and low power consumption.
400 μA
TSSOP14,.25
LMV393IDDURG4
LMV393IDDURG4 by Texas Instruments is a dual comparator with a max input offset voltage of 9000 uV and a max average bias current of 0.4 uA. It operates at temperatures ranging from -40 to 85 °C and is ideal for industrial applications requiring precise voltage comparisons in compact spaces.
0.091 in (2.3 mm)
0.035 in (0.9 mm)
VSSOP
Small Outline, Very Thin Profile, Shrink Pitch
TSSOP8,.12,20
LMV393IPWG4
LMV393IPWG4 by Texas Instruments is a comparator with 2 functions, operating at temperatures from -40 to 125 °C. It has a max input offset voltage of 9000 uV and a max supply current of 0.3 mA. Ideal for automotive applications due to its small outline package and low bias current.
TSSOP8,.25
LM139DRG4
LM139DRG4 by Texas Instruments is a comparator with 5000uV max input offset voltage and 0.3uA max average bias current. It operates at -55 to 125 °C, suitable for military-grade applications. The device has 14 terminals, open-collector output type, and requires 5V nominal voltage.
Open-Collector, Open-Drain
300 nA
LM239PWRG4
LM239PWRG4 by Texas Instruments is a comparator with 4 functions, operating at a supply voltage of 5V. It features a max input offset voltage of 5000uV and a max bias current of 0.4uA. This device is commonly used in applications requiring open-collector output type for precise comparisons.
LM2901AVQPWRG4
LM2901AVQPWRG4 by Texas Instruments is a comparator with 4 functions, operating at a supply voltage of 5V. It features a max input offset voltage of 2000uV and a max average bias current of 0.5uA. This device is ideal for automotive applications due to its small outline package and low power consumption.
2 mV
500 nA
2.5 mA
LM2901VQDRG4
LM2901VQDRG4 by Texas Instruments is a comparator with 4 functions, 7000uV max input offset voltage, and 0.25uA max average bias current. Widely used in automotive applications due to its open-collector output type and small outline package style.
0.154 in (3.91 mm)
SOP14,.25
LM2901VQPWRG4
LM2901VQPWRG4 by Texas Instruments is a comparator with 4 functions, operating at -40 to 125 °C. It has a max input offset voltage of 7000 uV and bias current of 0.5 uA. Widely used in automotive applications due to its small size, low power consumption, and fast response time of 1300 ns.
LM339APWG4
LM339APWG4 by Texas Instruments is a comparator with 4 functions, operating at a supply voltage of 5V. It features a max input offset voltage of 3000uV and a max bias current of 0.4uA, making it ideal for applications requiring precise voltage comparisons in commercial-grade environments. This surface-mount device has a small outline package style and open-collector output type, suitable for compact electronic designs with low power consumption requirements.
TLC372QDRG4
TLC372QDRG4 by Texas Instruments is a dual comparator with 10000 uV max input offset voltage and 0.02 uA max average bias current. It operates at -40 to 125 °C, ideal for automotive applications. The small outline package has 8 terminals, surface mount capability, and open-collector output type.
TLC374MDG4
TLC374MDG4 by Texas Instruments is a CMOS comparator with 4 functions, open-collector output type, and fast response time of 650 ns. It operates in a wide temperature range from -55 to 125 °C and has low bias current of 0.02 uA making it ideal for military applications requiring precise voltage comparisons. The small outline package with dual terminals and surface mount capability makes it suitable for compact electronic designs.
600 μA
LM193AYDT
LM193AYDT by STMicroelectronics is a dual comparator with a max input offset voltage of 4000 µV and operates at a nominal voltage of 5 V. It features an open-collector output and is suitable for automotive applications due to its AEC-Q100 screening level. With a wide temp range (-55 °C to 125°C), it ensures reliable performance in harsh environments.
4 mV
AEC-Q100
LM193YDT
LM193YDT by STMicroelectronics is a dual comparator with a max input offset voltage of 9mV and low bias current of 0.4µA, ideal for precision applications. It operates within -55 °C to 125°C and supports supply voltages up to 36V. Its compact SO8 package makes it suitable for space-constrained designs.
TLC3704MDRG4
TLC3704MDRG4 by Texas Instruments is a CMOS comparator with 4 functions, 10000 uV max input offset voltage, and 0.03 uA max average bias current. Ideal for military applications due to its MIL-graded temperature range of -55 to 125 °C and push-pull output type.
30 nA
175 μA
2.7 µs
LM2903VQDRG4
LM2903VQDRG4 by Texas Instruments is a dual comparator with 15000 uV max input offset voltage and -0.5 uA max average bias current. It operates at -40 to 125 °C, suitable for automotive applications due to its open-collector output type and small outline package style.
-500 nA
1 mA
© 2023 All rights reserved
