Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Yageo's RC0603FR-10360RL is a fixed resistor with 360 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Median Price
$0.052
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.008
1k+ parts
$0.007
10k+ parts
$0.003
DigiKey
-
$0.004
Vyrian
Nova Conductors
Corohmni
$0.339
AZTECH Wire
$20.350
$19.540
$19.150
$18.770
Netroflash
With a rated temperature of 70°C, this fixed resistor can safely operate within a wide range of temperatures, making it suitable for various applications.
The metal glaze/thick film technology used in this resistor ensures high stability and reliability over time, providing consistent performance.
The rectangular construction makes this resistor easy to mount and integrate into circuit designs, allowing for efficient installation.
With a resistance of 360 ohms, this fixed resistor can effectively control current flow in a circuit, helping to achieve desired voltage levels.
Having two terminals simplifies the connection process, making it easier to integrate this resistor into circuit designs.
The surface mount technology (SMT) package style used in this resistor allows for efficient placement and soldering on circuit boards, saving space and facilitating automated assembly.
The wraparound terminal shape provides a secure connection and minimizes the risk of accidental disconnection, ensuring reliable performance in various operating conditions.
With a maximum operating temperature of 155°C, this resistor can withstand high temperatures without compromising its performance, making it suitable for demanding applications.
The wide range of minimum operating temperature (-55°C) allows this resistor to function effectively in cold environments, ensuring consistent performance in various conditions.
With a temperature coefficient of 100 ppm/°C, this resistor has a relatively low sensitivity to temperature changes, providing stable and accurate resistance values over a range of operating temperatures.
The matte tin finish with nickel barrier on the terminals enhances the solderability and reliability of connections, ensuring long-term performance and stability.
The low height of the package makes this resistor suitable for compact designs and applications where space is limited, offering flexibility in circuit layout.
Being a fixed resistor, this component provides a constant resistance value, making it ideal for applications where precise resistance values are required.
With an operating voltage of 75V, this resistor can safely handle and control voltage within the specified range, ensuring reliable performance in various electronic circuits.
With a tolerance of 1%, this resistor provides accurate and consistent resistance values, minimizing errors in circuit operation and ensuring reliable performance.
The compact length of the package allows for efficient placement on circuit boards and enables space-saving designs, making it suitable for compact electronic devices.
The surface mounting type facilitates easy and secure installation on circuit boards, enabling quick and reliable assembly in production environments.
With a rated power dissipation of 0.1W, this resistor can handle power efficiently and effectively dissipate heat, ensuring long-term reliability and performance.
The narrow width of the package allows for flexible placement and integration in tight spaces, offering versatility in circuit layout and design.
Fixed Resistors RC0603FR-10360RL attributes and parameters. Explore more Fixed Resistors devices from Yageo
Additional Features:
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
RC0603FR-10360RL Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
Yageo Corporation is a Taiwanese electronics company that produces a wide range of passive electronic components, including resistors, capacitors, and inductors. The company was founded in 1977 and is headquartered in Taipei, Taiwan, with manufacturing facilities and sales offices around the world.
Founder & Chairman
Pierre Chen
CEO
David Wang
Sales & Marketing
Claudio Lollini
Kaohsiung Plant #1
Fabrication
Fab Initiation
Taiwan
Kaohsiung
Wafer Capacity
Kaohsiung Plant #2
Kaohsiung Plant #3
Kaohsiung NEPZ Plant
Suzhou Plant
China
Suzhou
Compostar Plant (Hi-cap MLCC)
Dongguan Plant
Dongguan
Szombathely Plant
Hungary
Szombathely
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Digitron Semiconductors
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
RC0402FR-07330RL
Yageo
Yageo's RC0402FR-07330RL is a 330 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.0625 W. Ideal for surface mount applications in various electronic circuits.
ERJ2RKF1502X
Panasonic
ERJ2RKF1502X by Panasonic is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0603FR-072K7L
Yageo's RC0603FR-072K7L is a fixed resistor with 2700 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
CRCW04021K00FKEDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04021K00FKEDHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.2 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55 to 155 °C operating temperature range.
RC1206FR-0710RL
Yageo's RC1206FR-0710RL is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. With a rated power dissipation of 0.25W and operating voltage of 200V, it operates b/w -55°C to 155°C. Ideal for applications requiring precise resistance values in compact electronic devices.
ERJ8ENF1002V
ERJ8ENF1002V by Panasonic is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 200 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
CPF0603F1K0C1
TE Connectivity
TE Connectivity's CPF0603F1K0C1 is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 50 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
RC0603FR-072.2RL
Yageo's RC0603FR-072.2RL is a 2.2 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 50V, it operates b/w -55°C to 155°C making it ideal for various electronic circuits requiring precise resistance values in compact spaces.
ERA3ARB103V
Panasonic ERA3ARB103V is a thin film fixed resistor with 10000 ohm resistance, 0.1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
CR0402-FX-1003GLF
Bourns
Bourns CR0402-FX-1003GLF is a 100000 ohm fixed resistor with 1% tolerance. Its metal glaze/thick film technology and -55 to 155 °C operating temperature range make it ideal for surface mount applications in various electronic devices requiring precise resistance values. The compact 0402 size and wraparound terminals ensure easy integration and reliable performance.
CRG0603F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MCS04020C1001FE000
Vishay Intertechnology's MCS04020C1001FE000 is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and operating temperatures ranging from -55 to 125 °C.
CRCW040210K0FKEDC
Vishay Intertechnology's CRCW040210K0FKEDC is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values and operating temperatures ranging from -55 to 155 °C.
RT0805FRE0710KL
Yageo's RT0805FRE0710KL is a thin film fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating voltage of 150 V. With a temperature coefficient of 50 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
AC05000002207JAC00
Vishay Intertechnology's AC05000002207JAC00 is a 5W fixed resistor with 0.22 ohm resistance and 5% tolerance. With a temperature range of -55 to 250 °C, it is ideal for applications requiring high power dissipation in through-hole mounting setups. The wire wound technology and axial package style make it suitable for various industrial electronics.
352110KFT
TE Connectivity's 352110KFT is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 2W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
WR06X000PTL
Walsin Technology
WR06X000PTL by Walsin Technology is a fixed resistor with 0 ohm resistance, METAL GLAZE/THICK FILM tech, and SMT package style. Ideal for jumper applications in electronics, it operates b/w -55 to 155 °C and features matte tin terminal finish.
CRCW060310M0FKEA
Vishay Intertechnology's CRCW060310M0FKEA is a fixed resistor with 10000000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 75 V.
RK73H2ATTD1002F
RK73H2ATTD1002F by Koa Speer Electronics is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It is designed for surface mount applications in various electronic circuits due to its compact rectangular package and high operating temperature range of -55 to 155 °C.
ERJU06F1002V
The Panasonic ERJU06F1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RC0603FR-0710KL
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
RC0603FR-07100KL
Yageo's RC0603FR-07100KL is a fixed resistor with 100k ohm resistance, 1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics due to its metal glaze/thick film technology and temperature coefficient of 100 ppm/°C. Operating range from -55 to 155 °C makes it suitable for various electronic circuits.
RC0603FR-07100RL
Yageo's RC0603FR-07100RL is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
RC0603FR-070RL
Yageo's RC0603FR-070RL is a fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features metal glaze/thick film technology in a rectangular SMT package, suitable for jumper applications in various electronic circuits.
RC0603FR-074K7L
Yageo's RC0603FR-074K7L is a 4700 ohm fixed resistor with a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and has a max power dissipation of 0.1 W. It is commonly used in surface mount applications requiring precise resistance values.
RC0603FR-071ML
Yageo's RC0603FR-071ML is a 1M ohm, 1% tolerance fixed resistor with a power dissipation of 0.1W. It operates b/w -55°C to 155°C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
RC0603FR-07330RL
Yageo's RC0603FR-07330RL is a fixed resistor with 330 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for SMT applications with operating voltage of 75 V and temperature range from -55 to 155 °C.
RC0603FR-0747KL
Yageo's RC0603FR-0747KL is a 47000 ohm, 1% tolerance fixed resistor with a max operating temperature of 155°C. This SMT resistor, with METAL GLAZE/THICK FILM technology and WRAPAROUND terminals, is ideal for applications requiring precise resistance values in compact electronic devices.
RC0603FR-072K2L
Yageo's RC0603FR-072K2L is a fixed resistor with 2200 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for SMT applications, it operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C.
RC0603JR-0710KL
Yageo's RC0603JR-0710KL is a fixed resistor with 10000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in various electronic circuits.
RC0603FR-0720KL
Yageo's RC0603FR-0720KL is a fixed resistor with 20000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in various electronic circuits requiring precise resistance values.
RC0603FR-0722KL
Yageo's RC0603FR-0722KL is a 22000 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. It operates b/w -55°C to 155°C, making it ideal for various applications requiring a rated power dissipation of 0.1W in compact electronic devices. The metal glaze/thick film technology and wraparound terminal shape ensure reliable performance in a small 0603 package size.
RC0603FR-0715KL
Yageo's RC0603FR-0715KL is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its SMT package style and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0603FR-071K5L
The Yageo RC0603FR-071K5L is a fixed resistor with a resistance of 1500 ohm and a tolerance of 1%. It has a max operating temperature of 155 °C and is commonly used in surface mount applications.
RC0603FR-072KL
Yageo's RC0603FR-072KL is a fixed resistor with 2000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0603FR-074K7
Yageo's RC0603FR-074K7 is a 4700 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. It operates b/w -55 to 155 °C and has a power dissipation of 0.1 W. Ideal for applications requiring precise resistance values in compact electronic devices.
Thunder Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
RC0603FR074K7
Amri Enterprise
RC0603FR074K7 by Amri Enterprise is a fixed resistor with 4700 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved