Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FUSIBLE RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 127 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fusible Resistors FKN2WSJR-73-127R attributes and parameters. Explore more Fusible Resistors devices from Yageo
Additional Features:
Construction:
Fusing Time:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Package Style (Meter):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
FKN2WSJR-73-127R Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Yageo Corporation is a Taiwanese electronics company that produces a wide range of passive electronic components, including resistors, capacitors, and inductors. The company was founded in 1977 and is headquartered in Taipei, Taiwan, with manufacturing facilities and sales offices around the world.
Founder & Chairman
Pierre Chen
CEO
David Wang
Sales & Marketing
Claudio Lollini
Kaohsiung Plant #1
Fabrication
Fab Initiation
Taiwan
Kaohsiung
Wafer Capacity
Kaohsiung Plant #2
Kaohsiung Plant #3
Kaohsiung NEPZ Plant
Suzhou Plant
China
Suzhou
Compostar Plant (Hi-cap MLCC)
Dongguan Plant
Dongguan
Szombathely Plant
Hungary
Szombathely
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
NFR25H0002201JR500
Vishay Intertechnology
Vishay Intertechnology's NFR25H0002201JR500 is a fusible resistor with 2200 ohm resistance, 5% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for applications requiring high reliability in extreme temperature environments.
R252004
Littelfuse
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Manufacturer Series: R252; Shape (Package): TUBULAR PACKAGE; Packing Method: TR; Terminal Shape: WIRE;
R25203.5
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 2; Rated Temperature: 125 Cel; Shape (Package): TUBULAR PACKAGE; Manufacturer Series: R252;
FW20A10R0JA
Bourns
Bourns FW20A10R0JA is a 10 ohm fusible resistor with 5% tolerance, rated for 2W power dissipation. Featuring wire wound technology and tubular construction, it operates b/w -55°C to 275°C. Ideal for applications requiring reliable overcurrent protection in through-hole mounting setups.
AC03000009109JACCS
Vishay Intertechnology's AC03000009109JACCS is a fusible resistor with 91 ohm resistance, 3W power dissipation, and 5% tolerance. It operates b/w -40 to 200 °C and has a temperature coefficient of 200 ppm/°C. Ideal for applications requiring reliable overcurrent protection in electronic circuits.
AC03000002209JACCS
Vishay Intertechnology's AC03000002209JACCS is a 22 ohm fusible resistor with wire wound technology. Rated for 3W power dissipation, it operates b/w -40 to 200°C. Ideal for through-hole mounting in applications requiring high temperature tolerance and UL compliance.
FKN1WSJR-52-8R2
Yageo
Yageo's FKN1WSJR-52-8R2 is a fusible resistor with 8.2 ohm resistance, 1W power dissipation, and 155°C max operating temp. Ideal for applications requiring reliable overcurrent protection in circuits due to its fusing time of 60s and cylindrical package shape. Suitable for through-hole mounting with a diameter of 3.5mm and length of 9mm.
1625879-5
TE Connectivity
TE Connectivity's 1625879-5 Fusible Resistor features a thin film technology with 220 ohm resistance and 5% tolerance. With tubular packaging, it is ideal for through-hole mounting applications requiring a rated power dissipation of 0.5W and operating temperatures ranging from -55 to 155°C.
ULW3-22RJA1
Tt Electronics Plc
ULW3-22RJA1 by Tt Electronics Plc is a fusible resistor with 22 ohm resistance, 5% tolerance, and 3 W power dissipation. It operates b/w -55 to 200 °C and has an axial package style for through-hole mounting. Ideal for applications requiring high temperature stability and protection against overloads in electronic circuits.
FSQ510RJ
TE Connectivity's FSQ510RJ is a 10 ohm wire wound fusible resistor with 5% tolerance and 5W power dissipation. Ideal for through hole mounting, it operates b/w -55°C to 275°C with a temperature coefficient of 300 ppm/°C.
FRN25J47R
Tyco Electronics Components
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 47 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
FRN25J100R
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
ULW5-10RJT075
ULW5-10RJT075 by Tt Electronics Plc is a fusible resistor with 10 ohm resistance, 5% tolerance, and 5W power dissipation. It operates b/w -55 to 200 °C and has a temperature coefficient of 200 ppm/°C. Ideal for applications requiring high reliability in extreme temperature environments.
FW70A10R0JA
Bourns FW70A10R0JA is a 10 ohm fusible resistor with 5% tolerance, rated for 7W power dissipation. With a temperature coefficient of 200 ppm/°C, it operates b/w -55 to 275 °C. Ideal for through-hole mounting applications requiring high operating temperatures and protection against overloads.
WWF2AJT200R
Stackpole Electronics
WWF2AJT200R by Stackpole Electronics is a fusible resistor with 200 ohm resistance, 3W power dissipation, and 1s fusing time. Ideal for applications requiring high-temperature operation up to 350°C, such as automotive electronics and industrial equipment. Features wire wound technology in a tubular construction with matte tin terminal finish.
R252.062
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; Rated Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Shape (Package): TUBULAR PACKAGE; Additional Features: RATED CURRENT: 0.0625A;
FRN25JR22
TE Connectivity's FRN25JR22 is a fusible resistor with 0.22 ohm resistance, 5% tolerance, and 0.25 W power dissipation. It has a thin film technology, tubular package shape, and operates b/w -55 to 155 °C. Ideal for applications requiring precise resistance values in compact spaces.
FKN3WSJR-73-4R7
Yageo's FKN3WSJR-73-4R7 is a fusible resistor with 4.7 ohm resistance, 3W power dissipation, and 5% tolerance. It operates at -40 to 155 °C and has a fusing time of 60s. Ideal for applications requiring high temperature stability and protection against overcurrent situations in electronic circuits.
EMC2-39R0K
EMC2-39R0K by Tt Electronics Plc is a fusible resistor with a resistance of 39 ohm. It has a rated temperature of 70°C and can operate at temperatures ranging from -55°C to 155°C. This tubular package resistor is suitable for through-hole mounting and has a power dissipation of 2W.
R252001
FIXED RESISTOR - FUSIBLE; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 2; Packing Method: TR; Fusing Time: 14400 s; Additional Features: RATED CURRENT: 1A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved