Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Yageo CC1206KKX7R9BB474 is a SMT ceramic capacitor with 0.47uF capacitance, 50V URdc. X7R temperature coefficient, -55 to 125 °C operating range. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
Median Price
$0.058
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.262
100+ parts
$0.197
1k+ parts
$0.109
10k+ parts
$0.087
Mouser Electronics
$0.270
$0.103
$0.073
$0.056
Arrow
-
$0.039
Verical
TTI Europe
$0.030
Future Electronics
$0.078
Newark
$0.059
Master Electronics
TTI
$0.042
DigiKey
$0.055
Conrad
Chip1Stop
$0.054
Farnell
$0.075
$0.057
Element14
$0.184
$0.104
$0.097
Nova Conductors
$0.067
TME
$0.190
$0.061
$0.043
Vyrian
Diverse Electronics
Rutronik
$0.016
IBS Electronics
$0.034
Goldney Electronics S.L.
Chip Stock
NAC Semi
$0.160
Connect4Technologies Inc.
LIBRA Elektronik GmbH
Connector Distribution Corp
Right Parts Inc.
Cyclops Electronics Ltd
Martec Srl
Cogito LLC
Extreme Components
Ampacity Inc.
$0.025
Semicontronic
$0.024
Advanced Electronics
$0.046
$0.044
Argo Parts USA
$0.064
$0.062
Netroflash
Corohmni
$0.118
Aztec Data Supply Inc.
$0.140
Eastek
$0.020
Perfect Parts
Abacus Technologies
Continental Prestige Electronics
$0.038
Authorized Procurement Solutions
Ceramic is a reliable dielectric material known for its stability and low loss, making this capacitor a durable choice for various applications.
Rectangular package shape allows for efficient use of space and easy integration into circuit designs.
Multi-layer design provides higher capacitance in a compact size, ideal for applications where space is limited.
Various packing methods ensure convenient handling and storage of these capacitors during production and distribution.
Having two terminals simplifies the connection process and ensures reliable performance in the circuit.
Surface-mount technology (SMT) package style allows for easy automated assembly, enhancing production efficiency.
Wraparound terminal shape provides secure soldering and strong mechanical connection, improving overall reliability of the capacitor.
This capacitor has a tight negative tolerance, ensuring consistent performance within specified limits.
X7R temperature characteristics code indicates stable capacitance over a wide temperature range, suitable for diverse operating conditions.
Capable of operating at high temperatures without compromising performance, making it suitable for demanding applications.
Ceramic capacitors are known for their reliability, stability, and low cost, making them a popular choice for various electronic devices.
Capable of operating in extreme cold temperatures, ensuring functionality in a wide range of environmental conditions.
With a low temperature coefficient, this capacitor exhibits minimal change in capacitance with temperature variations, ensuring stable performance.
Matte Tin finish with Nickel barrier provides excellent solderability and corrosion resistance, extending the lifespan of the capacitor.
Low profile design allows for easy installation in compact electronic devices with limited space.
Narrow width enables efficient placement on circuit boards, contributing to overall space-saving design.
Surface-mounting feature simplifies assembly and offers secure attachment to the PCB, ensuring reliable operation.
Compact length dimensions make this capacitor suitable for space-constrained applications without compromising on performance.
Tight positive tolerance ensures consistent capacitance values, contributing to reliable performance in the circuit.
With a capacitance of 0.47 uF, this capacitor can store and release electrical energy efficiently, suitable for various filtering and decoupling applications.
Capable of handling a rated DC voltage of up to 50 volts, making it suitable for a wide range of electrical circuits and devices.
Fixed Capacitors CC1206KKX7R9BB474 attributes and parameters. Explore more Fixed Capacitors devices from Yageo
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
CC1206KKX7R9BB474 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Yageo Corporation is a Taiwanese electronics company that produces a wide range of passive electronic components, including resistors, capacitors, and inductors. The company was founded in 1977 and is headquartered in Taipei, Taiwan, with manufacturing facilities and sales offices around the world.
Founder & Chairman
Pierre Chen
CEO
David Wang
Sales & Marketing
Claudio Lollini
Kaohsiung Plant #1
Fabrication
Fab Initiation
Taiwan
Kaohsiung
Wafer Capacity
Kaohsiung Plant #2
Kaohsiung Plant #3
Kaohsiung NEPZ Plant
Suzhou Plant
China
Suzhou
Compostar Plant (Hi-cap MLCC)
Dongguan Plant
Dongguan
Szombathely Plant
Hungary
Szombathely
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rugao Dachang Electronic
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Allegro MicroSystems
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
0402YC104KAT2A
KYOCERA AVX
0402YC104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for applications requiring compact, high-performance capacitors in electronic circuits.
T491A106K010AT7280
KEMET Corporation
KEMET T491A106K010AT7280 is a 10uF, 10V tantalum capacitor with low tan delta of 0.06 and high ESR of 3800 mohm. Ideal for applications requiring compact SMT capacitors with polarized terminals in a rectangular package, operating b/w -55 to 125 °C for power supply filtering and decoupling circuits.
GRM155R61A475MEAAD
Murata Manufacturing
Murata Manufacturing's GRM155R61A475MEAAD is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
M39006/25-0248
Vishay Intertechnology's M39006/25-0248 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 486mA ripple current. Ideal for MIL-PRF-39006/25 applications requiring -55 to 125 °C operating temperature range and polarized terminals.
T491C475K025AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10B105KO8NNNC
Samsung Electro-mechanics
CL10B105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
M39006/22-0345
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: TANTALUM (WET);
CGA6M3X7S2A475K200AB
TDK
TDK's CGA6M3X7S2A475K200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT rectangular package with wraparound terminals ensures easy surface mount installation.
C2012X5R1V226M125AC
The TDK C2012X5R1V226M125AC is a ceramic capacitor with 22uF capacitance and 35V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring reliable energy storage.
0603B103K500CT
American Accurate Components
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; JESD-609 Code: e3;
12103D476MAT2A
12103D476MAT2A by KYOCERA AVX is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
M39006/25-0220
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0402C473K4RACAUTO
KEMET C0402C473K4RACAUTO is a ceramic capacitor with 0.047uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and matte tin terminal finish.
M39006/250220
M39006/250220 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 0.42 Tan Delta. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -55 to 125 °C. This polarized capacitor conforms to MIL-C-39006/25 standards and features a tubular package with wire terminals for through-hole mounting.
C1608X7R1H104K080AE
TDK C1608X7R1H104K080AE is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in varying temperatures.
GRT31CR61H106KE01L
Murata Manufacturing's GRT31CR61H106KE01L is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package design.
CL10C101JB8NNNC
CL10C101JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With its compact SMT package style and surface mounting feature, this capacitor is ideal for use in electronic devices where space is limited.
UMK107B7474KA-TR
Taiyo Yuden
UMK107B7474KA-TR by Taiyo Yuden is a ceramic capacitor with 0.47uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high reliability and stability in various electronic devices.
M39006/250236
M39006/250236 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 100uF capacitance, 60V URdc, and 0.19 Tan Delta. It has a leakage current of 0.004mA and ripple current of 429mA. Ideal for applications requiring high reliability in harsh environments like military and aerospace systems due to MIL-C-39006/25 reference standard compliance.
C0603C103K5RACAUTO7411
KEMET Corporation's C0603C103K5RACAUTO7411 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated at 50V DC voltage, and compact SMT package style for surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC1206KRX7R9BB104
Yageo
Yageo CC1206KRX7R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
CC1206KKX7RDBB102
CC1206KKX7RDBB102 by Yageo is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This fixed capacitor is commonly used in surface mount applications.
CC1210KKX7R9BB106
Yageo CC1210KKX7R9BB106 is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact rectangular package design.
CC1206KKX7R0BB104
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1210MKX5R7BB107
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
CC1206KKX7R8BB106
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1206KKX7R9BB105
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1206KRX7R9BB103
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1206KKX5R9BB106
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
CC1206KKX7RBBB103
Yageo's CC1206KKX7RBBB103 is a ceramic capacitor with 0.01uF capacitance and 500V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring stable capacitance over a wide temperature range.
CC1206KKX5R8BB226
Yageo CC1206KKX5R8BB226 is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CC1206KKX7R0BB225
CC1206KKX7R0BB225 by Yageo is a ceramic capacitor with a capacitance of 2.2 uF and a rated DC voltage of 100 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This fixed capacitor is commonly used in surface mount applications.
CC1206KKX7R7BB105
Yageo CC1206KKX7R7BB105 is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact size and stable performance.
CC1206KKX7R7BB225
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1210KKX7R0BB225
Yageo CC1210KKX7R0BB225 is a SMT ceramic capacitor with 2.2uF capacitance and 100V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
CC1206KKX7R7BB106
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1206MKX5R5BB107
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
CC1210MKX5R8BB476
Yageo CC1210MKX5R8BB476 is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CC1206KKX7RCBB102
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CC1206KKX7R9BN223
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved