Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ECL15UT02-S by XP Power is a 15W power supply module with 3 outputs. It offers high efficiency at 81% and low ripple voltage of 0.017675 Vrms. With approvals from CSA, EN, IEC, and UL, it is ideal for applications requiring stable power sources in industrial settings.
Median Price
$63.700
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Farnell
1+ parts
$51.750
100+ parts
$43.470
1k+ parts
-
10k+ parts
TRC Electronics
$62.450
Mouser Electronics
$57.330
DigiKey
$53.510
Verical
$78.064
$65.044
Nova Conductors
$52.459
TME
$55.760
$46.460
Vyrian
AZTECH Wire
$14.653
Ampacity Inc.
$43.990
Netroflash
$49.836
$48.787
Continental Prestige Electronics
$52.840
Neutron USA
$190.290
Argo Parts USA
Having approvals from reputable organizations like CSA, EN, IEC, and UL ensures that this power supply module meets industry standards for safety and performance.
Low ripple voltage ensures a stable output power supply, which is important for sensitive electronic devices.
High efficiency means less wasted energy and lower operating costs for the user.
Having multiple terminals allows for flexibility in connecting various components to the power supply module.
With a maximum operating temperature of 70°C, this power supply module can handle demanding operating conditions.
Capable of providing a maximum output current of 2 amps, making it suitable for various applications requiring higher power consumption.
Power Supply Modules ECL15UT02-S attributes and parameters. Explore more Power Supply Modules devices from XP Power
Additional Features:
Other IC type:
Approvals (V):
Main Output Efficiency:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Protection(s):
Main Out Ripple Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
Maximum Total Power Output:
Trim or Adjustable Output (V):
Warm-Up Time:
Width (mm):
ECL15UT02-S Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
As one of the world’s leading providers of power converter solutions, we ensure that critical electrical and electronic equipment is powered as safely, reliably and efficiently as possible. XP Power specializes in working with customers to design and build products in three target markets: healthcare, industrial technology and semiconductor manufacturing equipment. Our deep expertise in the technical and legislative requirements for these industries means we add great value to a project – from initial design discussions to full production support – saving our customers both time and money.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Transistor
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Hitachi
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Secos
Continental Device India
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Pulse Electronics
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
General Instrument
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
PJT-12V65WBAA
Delta Electronics
AC-DC REGULATED POWER SUPPLY;
DCM3623T50T13A6T00
Vicor
Vicor's DCM3623T50T13A6T00 is a DC-DC regulated power supply module with adjustable output voltage from 7.2V to 13.2V, ideal for applications requiring up to 160W total power output. This hybrid technology module operates at temperatures up to 95°C and accepts input voltages ranging from 9V to 50V, making it versatile for various power supply needs in compact spaces.
MEE1S0509DC
Murata Manufacturing
Murata MEE1S0509DC is a 1W DC-DC regulated power supply module with input voltage range of 4.5V to 5.5V and output voltage of 9V. It operates in industrial temperature grade (-40°C to 85°C) with load regulation of 9%. This rectangular package (11.5mm x 9.8mm x 7.05mm) is ideal for various power supply applications.
LCC600-28U-4P
Artesyn Embedded Technologies
AC-DC POWER FACTOR CORRECTION MODULE;
APXW005A0X3-SRZ
Ge Industrial Solutions
DC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: YES; Trim or Adjustable Output (V): YES; Minimum Output Voltage: 3 V;
N6734B
Keysight Technologies
The Keysight Technologies N6734B is a power supply module with 1.5A max output current, 52.5W total power output, and 0.005Vrms main out ripple voltage. It features AC-DC power factor correction technology and protection against over current, over voltage, and thermal issues. Ideal for applications requiring a compact microelectronic assembly with precise power delivery in the temperature range of 0 to 55°C.
I3A4W008A033V-001-R
Tdk-lambda
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO;
MDR-20-5
Advantech
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
TDR3-2422WISM
Traco Electronic Ag
TDR3-2422WISM by Traco Electronic Ag is a DC-DC regulated power supply module with 82% efficiency. It has dual terminals, operates in industrial temperature grade, and offers 12V nominal output voltage. With a max total power output of 3W, it is suitable for various applications requiring reliable power conversion in compact spaces.
MGJ2D121505SC
Murata Manufacturing's MGJ2D121505SC is a DC-DC regulated power supply module with 2W total power output. It operates in industrial temperature grade range from -40 to 100°C, ideal for various applications requiring stable 15V output voltage. With compact dimensions of 19.65mm x 9.95mm x 12.65mm, it offers high load regulation of up to 6%.
RAC20-24SK/W
Recom Power
RAC20-24SK/W by Recom Power is a 20W AC-DC regulated power supply module with a nominal input voltage of 115V and a max output voltage of 24.48V. It has approvals from CB, CSA, EN, IEC, and UL and is suitable for industrial applications requiring reliable power supply.
RCP-1000-24C
Mean Well Enterprises
RCP-1000-24C by Mean Well: 24V output, 40A max current, 960W total power. UL, CSA, TUV approved for various applications. Voltage-mode control with short circuit, overload protection.
LPV-100-48
AC-DC REGULATED POWER SUPPLY MODULE;
UWE-12/10-Q12PB-C
Murata Manufacturing's UWE-12/10-Q12PB-C is a 120W DC-DC regulated power supply module with adjustable output voltage from 9.6V to 13.2V. Featuring high efficiency at 92%, it has over-voltage, over-current, and over-temperature protections. Ideal for applications requiring reliable power supplies in compact spaces due to its microelectronic assembly package style and hybrid technology.
AM10CW-2405D-NZ
Aimtec
AM10CW-2405D-NZ by Aimtec is a 10W DC-DC regulated power supply module with dual outputs. It operates b/w -40 to 65°C, offering output voltage range of 4.85V to 5.15V for applications requiring stable power in compact spaces. With a package style of MICROELECTRONIC ASSEMBLY and nominal input voltage of 24V, it's ideal for various electronic devices.
HLG-320H-24AB
Mean Well Enterprises' HLG-320H-24AB is a 320.16W power supply module with 94.5% efficiency, adjustable output voltage from 12V to 24V, and multiple safety approvals for applications requiring reliable performance in temperatures ranging from -40°C to 90°C.
PTH05010WAD
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: PIN/PEG;
TMR1-2411SM
TMR1-2411SM by Traco Electronic Ag is a DC-DC regulated power supply module with 79% efficiency, 5V output voltage, and 0.2A max current. It is a surface-mount microelectronic assembly ideal for applications requiring compact power solutions in industrial environments.
IRM-60-24
Mean Well Enterprises' IRM-60-24 is a 60W AC-DC regulated power supply module with a nominal output voltage of 24V. It operates b/w -30 to 50°C, suitable for various applications. With a compact size of 87x52x29.5mm and hybrid technology, it offers reliable power solutions in microelectronic assemblies.
DCM3623T50M31C2T70
Vicor DCM3623T50M31C2T70 power supply module offers 93.6% efficiency, 30.8 V max output voltage, and 320 W total power output. Ideal for automotive applications with CE, EN, TUV, UL approvals and operating temperature range of -40 to 95°C. Features adjustable output voltage control mode for versatile use.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ECL15UD01-E
XP Power
ECL15UD01-E by XP Power is a 15W AC-DC regulated power supply module with dual terminals. It offers an output voltage range of 11.88V to 12.12V, efficiency of 82%, and max load regulation of 3%. Ideal for applications requiring reliable power sources in compact spaces with strict safety standards such as industrial automation and telecommunications equipment.
ECL15US03-S
ECL15US03-S by XP Power is a 10W power supply module with 3.3V output voltage and 3A max current. It features CSA, EN, IEC, UL approvals and offers high efficiency at 75%. With protection against over current and voltage, it is ideal for applications requiring a reliable power source in a compact rectangular package.
ECL15US05-P
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 5; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
ECL15UD02-S
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Main Out Ripple Voltage: .053025 Vrms;
ECL15UT02-P
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 5; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Main Out Ripple Voltage: .017675 Vrms;
ECL15UT03-P
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 5; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 24.9 mm;
ECL15UT02-T
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 8; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XXMA-X8;
ECL15UT03-T
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 8; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Main Out Ripple Voltage: .017675 Vrms;
ECL15UT02-E
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 6; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Total Power Output: 15 W;
ECL15UT03-E
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Width (mm): 33.5 mm;
ECL15US05-T
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 5; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Output Voltage: 4.75 V;
ECL15US09-S
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Width (mm): 34.5 mm;
ECL15US24-S
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 4; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO;
ECL15US15-SD
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Line Regulation: .5 %;
ECL15US24-SD
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
ECL15UT02-SD
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Voltage: 5.05 V;
ECL15UD01-SD
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 84 mm;
ECL15US12-SD
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Output Voltage: 12 V;
ECL15UD03-S
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 6; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Approvals (V): CSA, EN, IEC, UL;
ECL15UT03-S
AC-DC REGULATED POWER SUPPLY MODULE; No. of Terminals: 7; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO; Approvals (V): CSA, EN, IEC, UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved