Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 74437358047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 7.2A max rated current. Ideal for power applications, this SMT inductor has a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.
Median Price
$2.220
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.685
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.640
$1.260
$1.030
Bürklin Elektronik
$1.910
$1.580
$1.440
Mouser Electronics
$1.700
$1.400
DigiKey
Distrelec
$2.230
$1.650
$1.410
Newark
$2.540
$2.020
$1.860
Element14
$3.140
$2.680
$2.010
$1.930
Nova Conductors
VNN
Vyrian
Ampacity Inc.
$1.270
Aranea Global
$1.372
$1.317
Argo Parts USA
Continental Prestige Electronics
$0.993
$0.860
Surface mount technology allows for easy and efficient placement on PCBs, making installation and assembly convenient.
Shielding helps to minimize electromagnetic interference, ensuring reliable performance in electronic circuits.
Dual-ended terminals provide flexibility in circuit design and allow for easier connection to other components.
The nominal inductance of 4.7 uH suggests that this inductor can efficiently store and release energy in a variety of applications.
With a high maximum rated current, this inductor can handle significant power loads without overheating or performance degradation.
The high self-resonance frequency of 19 MHz indicates good performance at high frequencies, making it suitable for various applications.
Low DC resistance minimizes power loss and ensures efficient energy transfer, improving overall circuit performance.
Powdered iron core material offers high magnetic permeability, making the inductor suitable for applications requiring high inductance.
This special feature provides precise and accurate inductance measurement at a low current level, ensuring reliable performance in various circuit designs.
Fixed Inductors 74437358047 attributes and parameters. Explore more Fixed Inductors devices from Wurth Elektronik
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
74437358047 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Tesla Elektronicke Soucastky
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1554216004
Molex
WIRE AND CABLE;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5626
Bourns
5626 by Bourns is a fixed inductor with 100uH nominal inductance, suitable for RF applications. Featuring 2 terminals, it has a max rated current of 14A and operates b/w -55 to 105°C. Ideal for general purpose use, this cylindrical package inductor has a radial terminal style.
NRS4018T220MDGJ8
Taiyo Yuden
NRS4018T220MDGJ8 by Taiyo Yuden is a fixed inductor with 22uH nominal inductance, 0.29 ohm DC resistance, and 15 MHz self-resonance frequency. It is a power inductor designed for general purpose applications, featuring dual-ended terminals and shielded construction. Ideal for SMT mounting with a compact size of 4x4x1.8mm, it operates b/w -40°C to 125°C with a max rated current of 0.72A.
IHLP5050FDER1R0M01
Vishay Intertechnology's IHLP5050FDER1R0M01 is a shielded SMT inductor with 1uH nominal inductance, 32A max current, and -55 to 125°C operating range. Ideal for power applications due to its general purpose design and composite core material.
2312-V-RC
The Bourns 2312-V-RC is a shielded fixed inductor with 100uH nominal inductance and 7A max rated current. It is a high current inductor suitable for general purpose applications, featuring radial terminal placement and cylindrical package design. With a DC resistance of 0.037 ohm, it operates b/w -55 to 105 °C temperature range.
1506
Hammond Manufacturing
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;
B82479A1105M000
TDK
The TDK B82479A1105M000 is a surface mount fixed inductor with 1000uH nominal inductance, suitable for power applications. It has a max rated current of 0.56A and operates b/w -55°C to 150°C. The inductor features dual-ended terminals, ferrite core material, and comes in a rectangular package measuring 18.54mm x 15.24mm x 7.11mm (LxWxH).
LBMF1608T100K
Taiyo Yuden's LBMF1608T100K is a 0603 SMT fixed inductor with 10uH nominal inductance, 0.08A max current, and 32MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals and operates b/w -40°C to 105°C.
DRA74-102-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
744025100
Wuerth Elektronik & Kg
Wurth Elektronik 744025100 is a SMT fixed inductor with 10uH nominal inductance, 1A max current, and 41MHz self-resonance freq. Ideal for RF applications due to its cylindrical shape, dual-ended terminals, and general-purpose design. Operating temp range -40°C to 125°C makes it versatile for various electronic devices.
5543
Amecon
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Rated Current: 10 A;
HCF1007-3R3-R
Eaton Corporation
HCF1007-3R3-R by Eaton Corp is a surface mount fixed inductor with 3.3uH nominal inductance, 0.0075 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring a max operating temperature of 125°C and min of -40°C. The rectangular package with ferrite core and wraparound terminals make it ideal for various electronic devices.
IHLP1616ABER2R2M11
IHLP1616ABER2R2M11 by Vishay Intertechnology is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 2.75 A. It is a high current inductor suitable for general purpose applications, featuring a self-resonance frequency of 49 MHz and DC resistance of 0.0835 ohm.
DR127-150-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
CTX100-5-52-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
CM453232-1R0KL
Bourns CM453232-1R0KL is a 1uH SMT inductor with 2 terminals, suitable for RF applications. It operates at -40 to 100°C with a max current of 0.45A and DC resistance of 0.5 ohm. Its compact size (4.5x3.2x3.2mm) and ferrite core make it ideal for general purpose use in electronic circuits requiring high quality factor at 7.96MHz test frequency.
CTX100-2-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
5-1624055-5
TE Connectivity
TE Connectivity 5-1624055-5 is a radial fixed inductor with 1000uH nominal inductance, suitable for RF applications. It has a cylindrical package, 2 terminals, and operates b/w -20 to 80°C. With a self-resonance frequency of 1.3MHz and DC resistance of 2.1 ohm, it's ideal for general purpose use with a min quality factor of 40%.
IHLP5050FDER5R6M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; JESD-609 Code: e3;
IFSC1008ABER3R3M01
Vishay Intertechnology's IFSC1008ABER3R3M01 is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 1.31A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C, making it suitable for general purpose use.
IHLP6767GZER330M11
Vishay Intertechnology's IHLP6767GZER330M11 is a shielded, surface mount inductor with 33uH nominal inductance and 10.7A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 4.8MHz and operates b/w -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74438357015
Wurth Elektronik
74438356022
74438356022HT
74438357047
Wurth Elektronik 74438357047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3.9A max rated current. Ideal for power applications, it features a rectangular package, IRON ALLOY core material, and operates b/w -40 to 125 °C.
744311470
Wurth Elektronik 744311470 is a chip inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 6A and operates b/w -40 to 150°C. Ideal for SMT mounting, this general purpose inductor features dual-ended terminals and a self-resonance frequency of 33MHz.
74438357100
74438356220
74438356047HT
Wurth Elektronik's 74438356047HT is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, featuring a self-resonance frequency of 18MHz and DC resistance of 0.0748 ohm.
74438356047
Wurth Elektronik 74438356047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.9A and operates b/w -40 to 125°C, making it ideal for general purpose use. The inductor features dual-ended terminals, measures 4.1x4.1x2.1mm (LxWxH), and complies with AEC-Q200 standards.
74437324220
74438323100
Wurth Elektronik 74438323100 is a shielded SMT inductor with 10uH nominal inductance, 0.6A max current, and 25MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C. AEC-Q200 compliant, it features iron alloy core material and measures 2.5x2x1mm in size.
74438357068
74438335220
74438336100
74437529203220
Wurth Elektronik's 74437529203220 is a shielded, high current inductor with 22uH nominal inductance and 23.9A max rated current. Ideal for general purpose applications, it features dual-ended terminals, wraparound shape, and operates b/w -40 to 125°C.
7443551331
Wurth Elektronik 7443551331 is a shielded, high current inductor with 33uH nominal inductance and 5.5A max rated current. Ideal for general purpose applications, it features a rectangular package, dual-ended terminals, and operates b/w -40 to 155°C.
74437324022
Wurth Elektronik 74437324022 is a shielded fixed inductor with 2.2uH nominal inductance, suitable for power applications. It has a max rated current of 3.25A and operates b/w -40 to 125°C. With a self-resonance frequency of 49MHz, it features dual-ended terminals and wraparound shape in a compact SMT package.
7443551221
Wurth Elektronik 7443551221 is a shielded, dual-ended fixed inductor with 22uH nominal inductance and 6A max rated current. Ideal for high current applications, it features a rectangular package with dimensions of 13x12.8x6.2mm and operates b/w -40 to 155°C.
744314101
Wurth Elektronik 744314101 is a chip inductor with 10uH nominal inductance, suitable for power applications. Featuring dual-ended terminals and a wraparound shape, it has a max rated current of 3.5A and operates b/w -40 to 150°C. Ideal for general purpose use in SMT packages, this ferrite core inductor offers low DC resistance at 3.3 ohms.
744373580082
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved