Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
Median Price
$0.185
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.166
100+ parts
$0.148
1k+ parts
$0.139
10k+ parts
-
DigiKey
$0.180
$0.165
$0.150
$0.097
Mouser Electronics
$0.190
$0.143
Newark
$0.221
$0.196
$0.181
Element14
$0.240
$0.218
$0.214
Farnell
$0.173
$0.149
$0.125
Nova Conductors
Vyrian
Netsource Technology, Inc.
ComSIT Distribution GmbH
Cyclops Electronics Ltd
VNN
Argo Parts USA
$0.134
Ampacity Inc.
$0.141
Corohmni
Semicontronic
$0.296
$0.289
$0.287
Advanced Electronics
$1.529
$1.391
$1.254
Aztec Data Supply Inc.
$2.970
Kepictronics
Authorized Procurement Solutions
Perfect Parts
Netroflash
$0.136
$0.132
$0.129
Formix International (Excess)
Having 2 terminals allows for easy connection and installation of the filter.
Ferrite chip filters are known for their high efficiency in reducing electromagnetic interference, making this product a reliable choice for filtering data lines.
With a maximum operating temperature of 125 °C, this filter can withstand high temperatures without compromising its performance.
The ability to operate at temperatures as low as -55 °C ensures that this filter remains functional in various environmental conditions.
The tin finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term durability of the filter.
The narrow width of 0.5mm makes this filter suitable for compact spaces and surface mount applications.
The low DC resistance of 0.03 ohm minimizes power loss and ensures efficient filtering of data lines.
The small length of 1mm allows for flexibility in placement and mounting of the filter.
The output impedance of 10 ohm helps in attenuating unwanted signals and noise from data lines effectively.
The embossed packaging method in a 7-inch reel ensures easy handling and storage of multiple filters.
The surface mount design allows for simple and secure installation of the filter on PCBs, saving space and reducing assembly time.
The compact dimensions of 1.0x0.5x0.5mm or 0.039x0.02x0.02 inches make this filter suitable for use in small electronic devices.
With a rated current of 2A, this filter can handle relatively high electrical loads while maintaining stable performance.
The low profile height of 0.5mm allows for easy integration of the filter without adding excess thickness to the PCB.
Data Line Filters 7427927310 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
7427927310 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Synsemi
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
YFF31HC2A105MT000N
TDK
YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.
MLB-321611-1200PL
KITAGAWA ELECTRONICS PTE LTD
MLB-321611-1200PL by Kitagawa Electronics is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, 1200 OHM output impedance, and operates b/w -55 to 125 °C. Ideal for applications requiring filtering at frequencies ranging from 100 MHz with a compact size of L3.2XB1.6XH1.1 mm for surface mount installation.
CM3440Z171R-10
Laird Technologies
CM3440Z171R-10 by Laird Technologies is a data line filter with 2 functions and 4 terminals. It has a max DC resistance of 0.001 ohm and can handle a rated current of 20 A. This surface mount filter is suitable for applications requiring noise suppression in data lines.
742792410
Wuerth Elektronik & Kg
Wurth Elektronik 742792410 is a multi-layer FERRITE CHIP filter with dimensions L4.5XB1.6XH1.6 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 60 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.
MMZ1608B102CTA00
TDK MMZ1608B102CTA00 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.6 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications, it operates b/w -55 to 125 °C and has a rated current of 0.3 A.
BLM18RK601SN1D
Murata Manufacturing
Murata's BLM18RK601SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and DC resistance of 0.6 ohm. With dimensions of 1.6x0.8x0.8mm, this filter is suitable for maintaining an output impedance of 600 ohm at frequencies ranging from 100 MHz to TAPE AND REEL packaging method.
MPZ2012S601A
The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.
744235900
Wurth Elektronik 744235900 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 0.3uH and max DC resistance of 0.05 ohm, it's ideal for applications requiring a compact surface mount filter solution. Operating b/w -40 to 125°C, it offers high output impedance of 90 ohm for effective noise filtering.
ACM2012-900-2P-T
ACM2012-900-2P-T by TDK is a data line filter with 2 functions and a rated voltage of 50V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
LI0603D301R-10
Laird Technologies' LI0603D301R-10 is a chip bead data line filter with FERRITE CHIP technology. It operates b/w -40 to 125 °C, has a max frequency of 1000 MHz, and DC resistance of 0.35 ohm. Ideal for surface mount applications in electronics requiring impedance of 300 OHM at frequencies ranging from 25 MHz to 1 GHz.
P0353NLT
Pulse Electronics
Pulse Electronics P0353NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 590uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.021 ohm, and rated current of 5.6A. Ideal for surface mount applications requiring effective filtering in compact spaces.
EXC24CE900U
The Panasonic EXC24CE900U is a data line filter with 2 functions and a rated voltage of 5V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
742792621
Wurth Elektronik 742792621 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.2 ohm. Ideal for applications requiring surface mount filters in automotive electronics.
ACM9070-701-2PL-TL01
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
2425-001-X5U0-102AALF
Tusonix
FEED THROUGH CAPACITOR; Mounting Type: PCB MOUNT; Capacitance: 1000 uF; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Minimum Insulation Resistance: 10000 Mohm;
742792624
The Wurth Elektronik & Kg 742792624 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is suitable for applications requiring a rated current of 1.5 A and an output impedance of 180 ohm.
4300-009LF
FEED THROUGH CAPACITOR; Rated Current: 5 A; Height: 2.79 mm; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; Maximum Insertion Loss: 25 dB;
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
BK1608HS220-T
Taiyo Yuden
BK1608HS220-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 125°C and min frequency of 100 MHz, it offers low DC resistance of 0.05 ohm. This ferrite chip filter has dimensions of L1.6xB0.8xH0.8 (mm) and is suitable for surface mounting type in tape and reel packing method.
NFM41PC155B1H3L
Murata Manufacturing's NFM41PC155B1H3L is a FERRITE CHIP data line filter with 100 Mohm insulation resistance, 50V rated voltage, and 6A rated current. It operates b/w -55°C to 85°C, measures L4.5xB1.6xH1.0 mm, and has a max DC resistance of 0.009 ohm. Ideal for surface mount applications requiring high capacitance filtering capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
742792040
Wurth Elektronik
Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.
742792651
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
742792031
Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.
742792662
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
742792641
Wurth Elektronik 742792641 is a multi-layer ferrite chip filter with AEC-Q200 approval. It operates b/w -55 to 125 °C, has 2 terminals, and offers an output impedance of 300 ohm. Ideal for data line filtering applications in automotive electronics due to its compact size (1.6x0.8x0.8 mm) and high frequency range (100-250 MHz).
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
742792664
Wurth Elektronik 742792664 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and operating temperatures from -55 to 125 °C, it offers a max frequency of 120 MHz and DC resistance of 0.6 ohm, making it ideal for surface mount installations in high-frequency circuits.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
74279266
Wurth Elektronik 74279266 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L1.6XB0.8XH0.8 (mm), it is ideal for surface mount applications in automotive electronics requiring high impedance filtering up to 140 MHz.
742792663
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
742792022
Wurth Elektronik 742792022 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max operating temperature of 125 °C and output impedance of 220 OHM at a frequency range from 100 MHz to 300 MHz. Ideal for surface mounting type, it offers low DC resistance (0.05 ohm) and rated current of 2 A in TAPE AND REEL packing method.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
7427927311
FERRITE CHIP; Maximum DC Resistance: .09 ohm; Rated Current: 1.2 A; Maximum Operating Temperature: 125 Cel; Length: 1 mm; Minimum Operating Temperature: -55 Cel;
74279226101
Wurth Elektronik 74279226101 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH2.3 (mm). With a max frequency of 1100 MHz and output impedance of 100 OHM, it's ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
742792093
Wurth Elektronik 742792093 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 2200 OHM at frequencies ranging from 80-100 MHz.
74279218
Wurth Elektronik 74279218 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 90 MHz, suitable for data line filtering applications in surface mount configurations.
742792602
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
742792653
FERRITE CHIP; Construction: Multi-Layer; Maximum DC Resistance: .65 ohm; Maximum Frequency: 200 MHz; Material: Ferrite; Rated Current: .5 A;
742792625
Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved