Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .6 ohm; Rated Current: .2 A; Height: .8 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters 74279266LF attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Rated Current:
Width (mm):
74279266LF Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Kec
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
STMicroelectronics
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
DLW5BTM102SQ2L
Murata Manufacturing
Murata Manufacturing DLW5BTM102SQ2L is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L5.0xB5.0xH2.35 mm. Ideal for applications requiring noise suppression in data lines.
FBMH1608HM601-T
Taiyo Yuden
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
BLM31SN500SZ1L
Murata's BLM31SN500SZ1L is a FERRITE CHIP filter with 2 terminals, rated for 12A current. It operates b/w -55°C to 150°C, with max DC resistance of 0.0016 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening and compact dimensions of L3.2xB1.6xH1.1 mm.
BLM18BD102SN1D
Murata Manufacturing's BLM18BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.85 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000Ω and rated current of 0.1A.
MPZ1608S601AT
TDK
TDK's MPZ1608S601AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, this ferrite chip has a DC resistance of 0.15 ohm and output impedance of 600 OHM.
74270055
Wuerth Elektronik & Kg
Wurth Elektronik 74270055 is a FERRITE BEAD Data Line Filter with 225 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, suitable for noise suppression in electronic circuits. Featuring a diameter of 18.6mm and stud mount design, it's ideal for applications requiring effective filtering and impedance matching.
74279228260
Wurth Elektronik's 74279228260 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C, DC resistance of 0.008 ohm, and output impedance of 26Ω. Ideal for applications requiring surface mount filters with a rated current of 6.5A.
MMZ2012R102AT000
TDK's MMZ2012R102AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and min of -55°C, it offers low DC resistance of 0.3 ohm and output impedance of 1000 ohm. This surface mount ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 0.5 A.
BNX022-01
Murata Manufacturing's BNX022-01 is a 3-function data line filter with 500 Mohm insulation resistance and 50 V rated voltage. With max insertion loss of 35 dB, it operates b/w -40 to 125 °C and has a rated current of 10 A. Ideal for surface mount applications requiring effective noise filtering in data lines.
LI0805H151R-10
Steward
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
P0354NLT
Pulse Electronics
Pulse Electronics P0354NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 1170 uH. It operates b/w -40 to 120 °C and has a max DC resistance of 0.2 ohm. Ideal for surface mount applications, it offers a rated current of 1.22 A in compact dimensions of L12.7xB12.7xH5.46 mm, making it suitable for various electronic devices requiring noise filtering on data lines.
BKP1608HS391-TV
Taiyo Yuden's BKP1608HS391-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 390 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, it operates b/w -55 to 85 °C in surface mount installations.
SRF0905-100Y
Bourns
Bourns SRF0905-100Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 10uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.08 ohm, and output impedance of 200 ohm. Ideal for surface mount applications requiring filtering in data lines with a current rating of 1.6A.
MPZ1005S121CT
The TDK MPZ1005S121CT is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. It operates b/w -40°C to 85°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. Dimensions: L1.0xB0.5xH0.5 (mm).
MPZ1608S600ATDH5
TDK's MPZ1608S600ATDH5 is a FERRITE CHIP data line filter with 2 terminals. It offers a max DC resistance of 0.02 ohm and an output impedance of 60 OHM. With dimensions of L1.6xB0.8xH0.6 (mm), it is ideal for surface mount applications in various electronic devices, ensuring efficient filtering and protection against electromagnetic interference.
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
ACM2012-201-2P-T002
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
YFF31HC2A105MT000N
YFF31HC2A105MT000N by TDK is a FEED THROUGH CAPACITOR with 100 V rated voltage, 40 dB max insertion loss, and 6 A rated current. Ideal for data line filtering applications due to its compact dimensions of L3.2XB1.6XH1.3 (mm) and surface mounting type.
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved