Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CARD EDGE CONNECTOR;
Median Price
$3.730
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Distrelec
1+ parts
$3.204
100+ parts
$2.539
1k+ parts
$2.092
10k+ parts
-
Bürklin Elektronik
$3.050
$2.540
Mouser Electronics
$4.010
$3.280
$2.180
DigiKey
$3.010
RS (Exports)
$2.383
$2.228
Elcom Components
Netroflash
$2.191
Headers & Edge Type Connectors 693071030811 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Wurth Elektronik
Connector Type:
693071030811 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Changzhou Galaxy Century Microelectronics
Digitron Semiconductors
NE555D
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Rectron
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
DTM04-3P-E003
TE Connectivity
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
475532001
Molex
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
357-074-422-212
Edac
Edac 357-074-422-212 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40 to +105°C. Ideal for applications requiring high reliability and durability in electrical connections.
341-054-500-101
Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
22-55-2101
The Molex 22-55-2101 is a 2-row board connector with 0.1" pitch, suitable for commercial applications. Featuring glass-filled polyester insulator, it has 10 contacts and operates b/w -40 to 120°C. With crimp termination and female SQ pin-skt contact style, it is UL and CSA compliant for reliable performance in various electronic devices.
PHR-5
J S T Mfg
PHR-5 by J S T Mfg is a 5-contact board connector with a mating contact pitch of 0.079 inches. It has a body length of 0.465 inch and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in applications requiring a compact and reliable connection for signal transmission.
VHR-4N-BK
BOARD CONNECTOR;
PHR-3
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
1638190000
Weidmueller & Kg
1638190000 by Weidmueller & Kg is a BOARD CONNECTOR with 17 contacts, TIN finish, and UL 94V-0 flammability rating. It is used for CABLE mounting applications requiring FEMALE contact gender and SCREW termination in SOCKET style connectors.
22-23-2061
The Molex 22-23-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring a reliable connection with solder termination and rectangular contact pattern.
B5B-EH-A(LF)(SN)
B5B-EH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" mating contact pitch, 0.15" body width, and 0.236" body depth. It features Tin (Sn) reflowed termination for soldering applications. Ideal for use in electronics requiring a compact straight male connector with UL 94V-0 flammability rating.
DF1E-6S-2.5C
Hirose Electric
The Hirose Electric DF1E-6S-2.5C is a 6-contact board connector with a mating contact pitch of 0.098". Featuring a dielectric voltage of 650VAC, it has an insulation resistance of 1Gohm and operates b/w -35°C to 85°C. Ideal for commercial applications, this socket-style connector offers crimp termination and is rated for signal currents up to 3A.
FTSH-105-01-F-DV-K-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
10152821-103Q000LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
DTM06-2S-E007
TE Connectivity DTM06-2S-E007 is a 1.47" x 0.569" x 0.508" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It has 2 contacts, UL 94V-0 flammability code, and supports up to 7.5A signal current. Ideal for cable mounting applications requiring polarized housing and strain relief.
22-29-2041
The Molex 22-29-2041 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 5000000000 ohm. With a rated current of 2.5A, this connector has a red insulator color and uses matte tin over nickel termination finish.
150201
Weidmueller & Kg's 150201 is a BOARD CONNECTOR with TIN finish, 4 contacts, and FEMALE gender. It is used for CABLE mounting with SCREW termination in PLUG body style.
78171-0003
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
693071010811
Wurth Elektronik
PCB CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: COPPER ALLOY;
693043020611
693043020611 by Wurth Elektronik is a PCB connector with a mating contact pitch of 0.05", insulation resistance of 500M ohm, and dielectric voltage rating of 500VAC. It features a liquid crystal polymer insulator, gold termination finish, and operates b/w -25 to 85°C. Ideal for board mounting applications requiring durable connectors with female contact gender.
693072010801
693072010801 by Wurth Elektronik is a PCB connector with mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. It features gold termination finish, liquid crystal polymer insulator, and operates b/w -25 to 85°C. Ideal for board mounting applications in commercial settings with durability up to 10k cycles.
693022010811
PCB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
693061010911
693061010911 by Wurth Elektronik is a PCB connector with 9 contacts, gold finish, and liquid crystal polymer insulator. It has a durability of 10000 cycles and operates b/w -25 to 85°C. Ideal for board mounting applications in commercial settings.
693021010811
Wurth Elektronik 693021010811 is a PCB connector with 8 contacts, rated at 1A signal current. It features liquid crystal polymer insulation, withstands up to 500VAC, and operates b/w -25°C to 85°C. Ideal for board mounting applications requiring durability with a right-angle mounting style.
693023010811
Headers and Edge Type Connectors; Termination Contact Finish: GOLD; JESD-609 Code: e4;
693063020911
PCB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
693071020811
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.043;
693010020611
Wurth Elektronik 693010020611 is a PCB connector with 0.1" pitch, suitable for commercial applications. It features liquid crystal polymer insulation, 500VAC dielectric voltage, and male contact gender. With a durability of 5000 cycles, it operates b/w -25 to 85°C temperature range.
693063010911
Wurth Elektronik 693063010911 is a PCB connector with gold finish, rated for 0.5A signal current. With 9 contacts, it offers high durability of 10000 cycles and operates b/w -25 to 85°C. Ideal for board mounting applications in commercial settings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved