Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
62201421821 by Wurth Elektronik is a board connector with 14 contacts, 2 rows, and a mating contact pitch of 0.05". It features a dielectric voltage of 500VAC, insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
Median Price
$2.030
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Farnell
1+ parts
$1.630
100+ parts
$1.070
1k+ parts
$0.920
10k+ parts
-
Bürklin Elektronik
$1.890
$1.400
$1.310
Mouser Electronics
$1.510
$1.300
Element14
$2.153
$1.592
$1.423
$1.275
Newark
$2.270
$1.750
$1.640
$1.540
RS (Exports)
Continental Prestige Electronics
$1.850
$1.160
$0.998
The tight mating contact pitch of 0.05 inch ensures a secure and reliable connection between the headers and edge type connectors.
With a high insulation resistance of 1000000000 ohm, this product provides excellent electrical safety and prevents any leakage currents.
The dielectric withstanding voltage of 500VAC ensures that the connectors can handle high voltage levels without breakdown, making them suitable for a wide range of applications.
With a maximum operating temperature of 125°C, these connectors can withstand high temperatures without any performance degradation, making them suitable for industrial applications.
The low contact resistance of 20 mohm ensures efficient transmission of signals without significant loss, making this product ideal for high-performance electronic devices.
Headers & Edge Type Connectors 62201421821 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Wurth Elektronik
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
62201421821 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Sangdest Microelectronics (Nanjing)
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Eic Semiconductor
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
53047-1010
Molex
Molex 53047-1010 is a board connector with 10 contacts, 0.049" pitch, and 0.561" body length. Ideal for commercial applications, it features polarized housing, solder termination, and UL94V-0 flammability rating.
M50-3500542
Harwin Plc
The Harwin PLC M50-3500542 is a 10-contact male board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it is ideal for commercial applications requiring a reliable connection in temperatures ranging from -40 to 105°C.
B14B-PUDSS-1(LF)(SN)
J S T Mfg
B14B-PUDSS-1(LF)(SN) by J S T Mfg is a 1-row loaded board connector with 14 contacts. It has a terminal pitch of 2mm and uses solder termination. This connector is commonly used in applications requiring male contact gender and straight mounting style.
71600-010LF
Amphenol Communications Solutions
71600-010LF by Amphenol is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features an insulation resistance of 50G ohm, operates b/w -65 to 105°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable signal connections in tight spaces.
B3B-XH-A-GU
BOARD CONNECTOR; Manufacturer Series: XH;
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
M50-3600542P
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
307-074-422-278
Edac
Edac 307-074-422-278 is a CARD EDGE CONNECTOR with 74 contacts, 2 rows, and 0.156" pitch. It has a dielectric voltage of 2545VAC, insulation resistance of 5000000000 ohm, and operates b/w -40 to 105 °C. Ideal for board and panel mounting applications requiring high current signal connections.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
M80-8530842
The Harwin PLC M80-8530842 is a 8-contact male plug board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring POLYAMIDE insulation, it operates b/w -55°C to 125°C, suitable for commercial applications requiring durability up to 500 cycles.
51021-0800
The Molex 51021-0800 is a board connector with 8 contacts, 0.049" pitch, and 0.463" body length. It has an insulation resistance of 100M ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
1-1658622-1
TE Connectivity
TE Connectivity 1-1658622-1 is a dual-row board connector with 60 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it uses polyethylene insulation and operates b/w -65 to 105°C. Ideal for ribbon cable applications, it offers durability up to 150 cycles and polarization key for secure connections.
TSW-102-07-G-S
Samtec
TSW-102-07-G-S by Samtec is a 0.1" pitch board connector with gold over nickel termination finish. It has a max operating temperature of 125°C and min operating temperature of -55°C. This connector is commonly used in commercial applications and offers reliable performance.
10152821-103Q000LF
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
61000418221
Wuerth Elektronik & Kg
61000418221 by Wurth Elektronik is a 4-contact board connector with 0.1" pitch, gold over nickel finish, and polyamide insulator. It operates b/w -40 to 125°C, has a dielectric voltage of 500VAC, and offers an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable signal transmission in black insulator color.
FTSH-105-01-L-DV-K-P-TR
Samtec's FTSH-105-01-L-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
53048-0610
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
VHR-6N-M
VHR-6N-M by J S T Mfg is a 6-contact board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector supports wire sizes from 22 to 18 AWG and offers high insulation resistance at 1000000000 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wurth Elektronik
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved