Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
61201622323 by Wurth Elektronik is a BOARD CONNECTOR with 16 contacts, rated at 1A signal current. It features a contact pitch of 0.1", insulation resistance of 1Gohm, and gold mating finish. Ideal for commercial applications requiring a reliable connection on PCBs with a temperature range from -40 to 125°C.
Median Price
$1.800
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$1.760
100+ parts
$1.500
1k+ parts
$1.300
10k+ parts
-
DigiKey
$1.530
$1.330
Farnell
$2.224
$1.555
$1.269
Element14
$8.670
$7.470
RS (Exports)
$1.748
Nova Conductors
$1.308
VNN
Vyrian
Sensible Micro Corp
Argo Parts USA
Ampacity Inc.
$1.490
Continental Prestige Electronics
$1.630
$1.140
$0.929
AZTECH Wire
$5.534
The tight pitch allows for efficient connection with compatible components.
The longer body provides ample space for secure contact points.
High insulation resistance ensures reliable performance and safety.
The wide body design offers stability and durability.
Withstanding high voltage makes it suitable for a variety of applications.
The depth allows for a secure fit in the intended connections.
This durable material ensures long-lasting performance.
Loaded with multiple rows for enhanced connectivity options.
Capable of operating in high-temperature environments without compromising performance.
Standard spacing for easy integration with PCBs.
Can operate in low-temperature conditions without adverse effects.
Double row design provides versatility and options for connections.
Specifically designed for board connections, ensuring compatibility.
Copper alloy offers excellent conductivity for optimal signal transmission.
Gold finish provides corrosion resistance and superior conductivity.
Polarized housing ensures proper alignment for secure connections.
Can handle signals up to 1 amp, suitable for various electronic applications.
Classic black color for a sleek and professional look.
Complies with UL standards for safety and quality assurance.
Multiple contact points for comprehensive connectivity options.
Single connector simplifies installation and maintenance.
Allows for precise alignment during connection for optimal performance.
Board mounting provides a secure and stable installation.
Standard terminal pitch for compatibility with various devices.
Rectangular pattern for easy identification and alignment during installation.
Solder termination ensures a strong and reliable connection.
Male connectors are commonly used for making secure connections.
Low contact resistance for efficient signal transmission.
Straight mounting style for easy integration into existing setups.
IDC contact style for quick and reliable installation.
Adequate terminal length for secure connections.
Locking mounting option provides added security during installation.
Rectangular contact pattern for efficient connectivity.
Suitable for commercial applications requiring reliable performance.
Headers & Edge Type Connectors 61201622323 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Wurth Elektronik
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
61201622323 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1552200168
Molex
WIRE AND CABLE;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Silicon Standard
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
VHR-2N-BK
J S T Mfg
BOARD CONNECTOR;
71922-220LF
Amphenol Communications Solutions
Amphenol's 71922-220LF header connector features a 0.1" pitch, 2 rows with 20 contacts, and matte tin over nickel finish. Ideal for board connections in commercial applications, it offers high insulation resistance of 105M ohm and operates b/w -65°C to 125°C temperature range.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
1473005-1
TE Connectivity's 1473005-1 is a CARD EDGE CONNECTOR with 200 contacts, POLYETHYLENE insulator, and 0.024" mating contact pitch. Ideal for board mounting applications, it offers a durability of 25 cycles and operates b/w -55°C to 85°C.
5-826629-0
TE Connectivity 5-826629-0 is a BOARD CONNECTOR with 50 contacts, rated at 5A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this connector offers durability up to 150 cycles and uses SOLDER termination.
DTM06-2S
TE Connectivity's DTM06-2S is a 2-contact board connector with 0.157" pitch, rated for 7.5A signal current at 250V. Its glass-filled polyamide insulator and UL94V-0 flammability rating make it ideal for cable mounting applications requiring a polarized housing and wire termination.
PHR-6-Y
PHR-6-Y by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator. It has a dielectric voltage of 800VAC, operates b/w -25 to 85°C, and features FEMALE SQ PIN-SKT contacts for CABLE mounting applications.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
280371-2
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
15-31-1033
The Molex 15-31-1033 header connector features a body length of 0.661", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board connections in commercial applications, it has a female contact gender, polyamide insulator material, and operates b/w -40 to 105°C.
QSH-030-01-L-D-A-K-TR
Samtec
QSH-030-01-L-D-A-K-TR by Samtec is a 60-contact, 2-row stacking connector with a mating contact pitch of 0.02". It features a liquid crystal polymer insulator, gold mating contact finish, and phosphor bronze contact material. Ideal for board-to-board applications requiring high durability and reliability in commercial settings.
TSW-104-07-T-S
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
801-43-020-10-012000
Mill-max Mfg
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
52746-1071
Molex 52746-1071 FFC/FPC connector with 10 contacts, gold finish, and white insulator. Suitable for board mounting with a mating pitch of 0.020", operating from -40 to 85°C. Ideal for commercial applications requiring a durable, surface-mountable connector with UL certification.
DF40C-100DS-0.4V(58)
Hirose Electric
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
PHR-2
PHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.079" pitch, 800VAC voltage withstand, and 1000000000 ohm insulation resistance. It features POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for CABLE mounting in applications requiring FEMALE contact gender and CRIMP termination.
DM3AT-SF-PEJM5(11)
DM3AT-SF-PEJM5(11) by Hirose Electric is a PCB connector with 0.043" mating contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications, it features a liquid crystal polymer insulator, copper alloy contacts with gold finish, and can withstand temperatures from -25 to 85 °C.
22-16-2070
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
851-43-045-10-002000
851-43-045-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 45 FEMALE contacts. It features TIN finish, 1.27mm pitch, and SOLDER termination. Ideal for applications requiring reliable connections in electronic devices or PCBs.
XHP-4
XHP-4 by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.098" pitch, 1000VAC voltage withstand, and 3A signal current rating. It features POLYAMIDE6 insulation, -25 to 85°C operating range, and UL94V-0 flammability. Ideal for CABLE mounting applications requiring FEMALE SQ PIN-SKT contacts with CRIMP termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
61201021621
Wurth Elektronik
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
61202021621
61202021621 by Wurth Elektronik is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It is commonly used in applications requiring a durable, polarized housing with a rated current of 3A.
61200621621
Wurth Elektronik 61200621621 is a 2-row board connector with gold (Au) - nickel (Ni) finish. It has 6 contacts, copper alloy material, and UL94V-0 flammability rating. Ideal for board mounting applications requiring male connectors with 2.54mm pitch in straight mounting style.
61201021721
61201021721 by Wurth Elektronik is a BOARD CONNECTOR with 10 contacts, GOLD finish, and POLARIZED HOUSING. It has a Mating Contact Pitch of 0.1 inch and operates b/w -40 to 125 °C. Ideal for commercial applications requiring a reliable connection in PCBs with a contact spacing of 2.54mm.
61201020621
61201020621 by Wuerth Elektronik & Kg is a 2-row, 10-contact board connector with gold finish and black insulator. It has a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring a reliable signal current rating of 3A in a polarized housing with UL certification.
61201621621
61201621621 by Wuerth Elektronik & Kg is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 1000000000 ohm. It is commonly used in commercial applications for its reliability and features a straight mounting style with locking option-1.
61201023021
Wurth Elektronik 61201023021 is a 2-row board connector with 10 contacts, gold termination finish, and 1A signal current rating. It has a body length of 0.684", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable female connectors with IDC termination in black color.
61201421621
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; IEC Conformity: NO; Termination Type: SOLDER;
61201620621
61202021721
61202621621
61204021621
BOARD CONNECTOR; Contact Material: COPPER ALLOY; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
61201621721
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; No. of PCB Rows: 2;
61202022121
61202022121 by Wurth Elektronik is a 20-contact board connector with gold-plated copper alloy contacts. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
61202023021
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; JESD-609 Code: e4;
61202623021
BOARD CONNECTOR; Manufacturer Series: 6120; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Contact Material: COPPER ALLOY;
61201623021
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Body Depth: .272 inch;
61201025821
Wurth Elektronik 61201025821 is a board connector with 0.1" pitch, suitable for commercial applications. It features stamped copper alloy contacts with AU finish, rated at 1A signal current. With IDC termination and polarized housing, it offers reliability in a gray insulator color.
61201421721
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Insulator Color: BLACK;
61201622921
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved