Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik's 150120YS75000 is a 2mm YELLOW LED with WATER CLEAR lens. It has 0.03A forward current, 595nm peak wavelength, and 120.0mcd luminous intensity. Ideal for surface mount applications in electronics for signaling or indicator purposes due to its compact size and high visibility.
Median Price
$0.214
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.196
100+ parts
$0.169
1k+ parts
$0.146
10k+ parts
-
DigiKey
$0.230
$0.182
$0.176
Mouser Electronics
$0.165
Newark
$0.252
$0.204
$0.187
Element14
$0.199
$0.177
Farnell
$0.152
$0.135
Nova Conductors
$0.163
Mobius Materials
$0.190
VNN
Bristol Electronics
Cyclops Electronics Ltd
Vyrian
Ampacity Inc.
$0.125
Netroflash
Advanced Electronics
$0.918
$0.908
$0.872
Perfect Parts
Continental Prestige Electronics
$0.161
$0.143
$0.134
Infinite Electronics LLP (Excess)
Single configuration makes it easy to use with simple circuit designs.
Compact size allows for versatile placement in various applications.
Low forward current consumption makes it energy efficient.
Yellow light at this wavelength provides good visibility and aesthetic appeal.
Water clear lens ensures maximum light output and clarity.
Single color LED simplifies color control and matching in applications.
Two terminals make it easy to wire up and connect in circuits.
High maximum operating temperature ensures reliability in various environmental conditions.
Low height makes it suitable for compact devices and space-constrained applications.
Rectangular shape provides a uniform light distribution and easy mounting.
Low minimum operating temperature allows for operation in extreme cold conditions.
Yellow color provides a warm and visually appealing light output.
TR packing method ensures safe transportation and easy handling.
3mm terminal pitch allows for easy integration into existing circuit layouts.
Wide viewing angle ensures good visibility from different perspectives.
High luminous intensity provides bright and vibrant light output.
Surface mount capability makes it easy to mount on PCBs for automated assembly.
Visible LEDs 150120YS75000 attributes and parameters. Explore more Visible LEDs devices from Wurth Elektronik
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
150120YS75000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
RN41N-I/RM
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Central Semiconductor
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
MLCAWT-A1-0000-000WE7
Cree Led
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Color At Wavelength: White; Height: 1.2 mm; Maximum Forward Current: .35 A;
LTST-C191KGKT-5A
Lite-on Technology
LTST-C191KGKT-5A by Lite-on Technology is a 1.1mm GREEN SINGLE COLOR LED with a peak wavelength of 574nm and a viewing angle of 130°. It is ideal for surface mount applications requiring a max forward current of 0.03A and an operating temperature range from -55 to 85 °C.
ASMT-YTB2-0BB02
Broadcom
ASMT-YTB2-0BB02 by Broadcom is a 2.3mm rectangular visible LED with separate, 3-element configuration. It has a peak wavelength of 629/521/464nm and max forward current of 0.05A. This LED is commonly used in applications requiring single color illumination with red/green/blue colors, such as displays and indicators.
TLMY1100-GS08
Vishay Intertechnology
Vishay Intertechnology's TLMY1100-GS08 is a 1.6mm SINGLE COLOR LED with peak wavelength of 591nm, forward current of 0.03A, and luminous intensity of 0.05cd. Ideal for applications requiring YELLOW light emission in compact spaces with operating temperatures ranging from -40 to 100°C.
QTLP650C-2.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Configuration: SINGLE;
LLN3-WW-XXX
Dialight
Dialight's LLN3-WW-XXX is a complex visible LED with 3 functions, single color warm white light, and round shape. Ideal for surface mount applications, it comes in bulk packaging and has 4 terminals.
MCL-S270GC
Multicomp Pro
MCL-S270GC by Multicomp Pro is a 1.4mm GREEN LED with peak wavelength of 568nm and viewing angle of 140°. Ideal for surface mount applications, it has a luminous intensity of 10.0mcd and operates b/w -40 to 85 °C temperatures.
XHP70B-00-0000-0D0HP20E3
Wolfspeed
SINGLE COLOR LED;
HLMP-1719-A00A2
HLMP-1719-A00A2 by Broadcom is a 3mm single color LED with peak wavelength of 583nm. With max forward current of 0.007A, it emits yellow light at 2.1mcd luminous intensity. Ideal for applications requiring a round, tinted diffused lens in bulk packaging.
568-0721-441F
Dialight's 568-0721-441F is a TRIPLE COLOR LED ARRAY with 4 BANKS and COMMON BIPOLAR TERMINAL. It features 2 ELEMENTS, peak wavelengths of 630/585/565 nm, and measures 3.99 mm in size. Ideal for applications requiring RED/YELLOW/GREEN illumination, this LED array has 8 terminals and a mounting feature of RADIAL MOUNT.
L-934GD-12V
Kingbright
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Color: GREEN;
LTST-C190KFKT
LTST-C190KFKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a peak wavelength of 611nm and max forward current of 0.03A. Ideal for applications requiring ULTRA BRIGHT ORANGE light, it has a viewing angle of 130° and operates b/w -35 to 85 °C temperatures.
HLMP-1790-A00A1
Broadcom's HLMP-1790-A00A1 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a compact, low-power consumption light source.
HLMP-4700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
ASMB-TTF0-0A20B
TRIPLE COLOR LED;
L-934GD-14V
Kingbright Electronic
L-934GD-14V by Kingbright Electronic is a 3mm green LED with a built-in resistor. It has a max forward current of 0.0135A and a peak wavelength of 565nm. This LED is commonly used in applications such as indicator lights and displays.
HLMP-3507-D00B2
Broadcom's HLMP-3507-D00B2 is a 5mm single color LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits high performance green light at 6.15mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 60°, such as indicator lights in electronic devices.
156125VS75000
Wuerth Elektronik & Kg
156125VS75000 by Wurth Elektronik is a 1.2mm SINGLE COLOR LED with peak wavelength of 575nm, max forward current of 0.02A, and bright green color. Ideal for surface mount applications in electronics, offering a viewing angle of 140° and nominal luminous intensity of 45.0mcd.
HSMH-C150
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
SML-D12U1WT86Q
ROHM
ROHM's SML-D12U1WT86Q is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens emitting RED light. It has a max forward current of 0.02A, luminous intensity of 51.5mcd, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring compact visible LEDs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
150141RV73100
Wurth Elektronik
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
150141M173100
Wurth Elektronik's 150141M173100 is a COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 635/515/465 nm. It has a max forward current of 0.03 A and viewing angle of 120°. Ideal for applications requiring RGB color mixing in compact electronic devices.
150141RS73100
150141RS73100 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 120°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85°C, making it suitable for various lighting projects.
150141GS73100
150141GS73100 by Wurth Elektronik is a single color LED with a peak wavelength of 515nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 120° and nominal luminous intensity of 1000mcd. Ideal for surface mount applications in electronics for its compact size (2.4mm) and green light emission.
150141BS73100
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
150141YS73100
150141YS73100 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 592nm, forward current of 0.03A, and luminous intensity of 300.0mcd. Ideal for applications requiring a single color LED with surface mounting feature and 120° viewing angle.
150141YB73100
DUAL COLOR LED;
150141VS73100
150141VS73100 by Wuerth Elektronik & Kg is a WATER CLEAR SINGLE COLOR LED with a peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 90.0mcd. Ideal for applications requiring BRIGHT GREEN light emission in compact spaces due to its small size (2.4mm) and surface mounting feature.
150120RS75000
150120RS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring red light emission in compact spaces, such as indicator lights in electronic devices.
150141RB73100
150120GS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 450.0; Lens Type: WATER CLEAR; Size: 2 mm;
150120VS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
150120SS75000
150120SS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 85°C, with water clear lens and surface mounting feature.
150120BS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 145.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
150120M173000
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 360.0/1000.0/350.0; Lens Type: WATER CLEAR; Additional Features: IEC-61249-2-21;
150120AS75000
150120AS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 610nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring AMBER light emission in compact spaces, such as indicator lights in electronic devices.
150141BS73140
150141GS73140
150141RS73140
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved