Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 1.2 A; No. of Functions: 1; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel;
Median Price
$0.100
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.019
1k+ parts
$0.010
10k+ parts
$0.006
Data Line Filters WLBD1608HCU331TL attributes and parameters. Explore more Data Line Filters devices from Walsin Technology
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Width (mm):
WLBD1608HCU331TL Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Incorporated in 1992, Walsin Technology Corporation is the world’s leading manufacturer of passive components with a one-stop-shop product portfolio and worldwide delivery platform. The company’s product lineup includes multiple-layer ceramic chip (MLCC) capacitor/array, chip-resistor/array & networks, inductors, RF filters, disc capacitor, varistor, chip fuse, and antenna, etc.In less than ten years, Walsin Technology grew rapidly into a publicly traded company in Taiwan and ranked as a top tier supplier for passive components. Its dedication in R&D and strategic alliances with business partners contribute to this remarkable achievement. Recognizing the importance of technical capability, Walsin Technology is committed strongly to R&D. The company has been spending approximately 3% of its sales in R&D since 2001. To ensure its product specs are in line with customers’ expectations, Walsin Technology constantly benchmarks its product development roadmap against the industry and focuses on developing miniaturized, cost-effective, environmentally friendly, protective, and specialty components. Walsin Technology has been continuously growing its business through alliances. Synergy with powder maker PDC, with specialty product producer Kamaya, and with regional distributors enables Walsin Technology to extend its product offerings and services. Ten production centers strategically located in Asia, Walsin Technology manufactures high-quality products and delivers to customers via its distribution network established worldwide. Walsin’s superior product quality and top-notch services have earned Walsin Technology world-renowned brand names to manufacture for their needs. From smartphones, networking devices, data centers, PCs, LED light bulbs, white goods, industrial equipment to automotive parts, Walsin Technology’s products can be found virtually in all electronic devices around you.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Sensitron Semiconductor
Unitrode
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Microsemi
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MI0603J680R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
IP4256CZ5-W,115
NXP Semiconductors
NXP Semiconductors' IP4256CZ5-W,115 is a 5-terminal data line filter with max operating temp of 85°C and min of -40°C. It features surface mounting type, tin terminal finish, and plastic package material. Ideal for applications requiring noise suppression in data lines.
LI0805H151R-10
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BLM15AG102SN1D
Murata Manufacturing
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
BLM31SN500SH1L
Murata Manufacturing's BLM31SN500SH1L is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It operates b/w -55°C to 125°C, has a DC resistance of 0.0016 ohm, and rated current of 12A. Ideal for data line filtering applications with an output impedance of 50 OHM.
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
742792151
Wuerth Elektronik & Kg
Wurth Elektronik 742792151 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 100-600 MHz frequency range, and 70 OHM output impedance. Ideal for surface mount applications in electronics for noise suppression.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
BLM18BB121SN1D
BLM18BB121SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
4300-009LF
Cts
The Cts 4300-009LF is a Data Line Filter with FEED THROUGH CAPACITOR type, rated for 200V and 5A. It offers high insulation resistance of 10000 Mohm, low insertion loss of 25 dB, and capacitance of 25 uF. Ideal for applications requiring panel mounting in environments ranging from -55 to 125 °C.
NFE61HT102F2A9L
Murata Manufacturing's NFE61HT102F2A9L is a Data Line Filter with 1000 Mohm Min Insulation Resistance, AEC-Q200 Screening Level, and 100 V Rated Voltage. It is ideal for applications requiring noise suppression in data lines, offering a compact size of L6.8xB1.6xH1.6 mm and rated current of 2 A.
MMZ1608Y102BTA00
TDK
TDK MMZ1608Y102BTA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has a DC resistance of 0.5 ohm and output impedance of 1000 ohm, suitable for data line filtering applications.
FBMJ1608HS220NTR
Taiyo Yuden
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
BLM18BA220SN1D
Murata's BLM18BA220SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 22 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
SRF0905-501Y
Bourns
Bourns SRF0905-501Y is a 2-function data line filter with inductance of 500uH and rated current of 1A. It operates b/w -40 to 105°C, has a max DC resistance of 0.15 ohm, and output impedance of 1000 ohm. Ideal for surface mount applications in electronics for noise filtering and signal conditioning.
FLTR100V10Z
Ge Power Electronics
DATA LINE FILTER MODULE; Maximum DC Resistance: .014 ohm; Rated Current: 10 A; Output Impedance (ohm): 50 OHM; Length: 50.8 mm; Minimum Operating Temperature: -40 Cel;
HI2220R301R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;
BLM31SN500SZ1L
Murata's BLM31SN500SZ1L is a FERRITE CHIP filter with 2 terminals, rated for 12A current. It operates b/w -55°C to 150°C, with max DC resistance of 0.0016 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening and compact dimensions of L3.2xB1.6xH1.1 mm.
744235110
Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Walsin Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved