Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$2.868
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$1.968
100+ parts
$1.687
1k+ parts
$1.586
10k+ parts
$1.563
Arrow
$2.018
-
Farnell
$2.180
$1.760
$1.650
Interstate Connecting
$2.945
$2.565
$2.305
Misumi USA
$3.150
DigiKey
$3.790
$2.740
$2.329
$2.183
Newark
$4.170
$3.010
$2.560
Element14
$5.300
$3.830
$3.260
Verical
$2.015
$1.954
Master Electronics
$2.990
$2.820
$2.650
Chip1Stop
$2.790
Future Electronics
$2.550
$2.450
Galco
$2.270
Nova Conductors
Flip Electronics
NAC Semi
$2.730
IBS Electronics
$4.216
$3.976
$3.736
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
VNN
Ampacity Inc.
$0.477
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Netroflash
Assembly Products 770-213 attributes and parameters. Explore more Assembly Products devices from Wago
Connector Accessory Type:
Data and energy flows are part of the infrastructure of the digital world. WAGO products ensure the long-term viability of this connectivity. We have always considered ourselves a reliable partner to the industry and are aware of the great responsibility we have as a leading supplier in the field of connection and automation technology. We face this challenge with passion and dedication and understand it as part of our entrepreneurial vision and mission.
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
General Instrument
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
39-00-0429
Molex
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
SPH-001T-P0.5L
J S T Mfg
SPH-001T-P0.5L by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
SPH-002T-P0.5S
SPH-002T-P0.5S by J S T Mfg is a CRIMP terminal for PH SERIES HOUSING with 2A rated current, 20 mohm contact resistance, and 0.031-0.059 inch cable entry range. It is designed for SIGNAL applications with FEMALE SQ PIN-SKT contacts made of PHOSPHOR BRONZE material.
BVH-21T-P1.1
BVH-21T-P1.1 by J S T Mfg is a CRIMP terminal CONTACT with 22-18 AWG wire size range, rated for 250V AC/DC. Made of PHOSPHOR BRONZE, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts and 0.067" cable entry.
5054311000
Molex 5054311000 CONTACT features: Rated AC Voltage 50V, Rated Current 1.5A, Material COPPER ALLOY. Application: Ideal for assemblies requiring FEMALE contacts with STRAIGHT mounting and SQUARE PIN-SOCKET style. Accepts wire sizes from 30 AWG to 26 AWG.
66103-4
TE Connectivity
TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.
030-1952-000
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Rated Current: 5 A; Rated AC Voltage: 1000 V; Mounting Style: STRAIGHT; Maximum Operating Temperature: 125 Cel; Design: SIGNAL;
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1-104480-7
TE Connectivity 1-104480-7 is a crimp terminal with 300V AC/DC rating, suitable for discrete wire applications. Featuring copper alloy construction, it has a contact resistance of 12 mΩ and can accommodate wire sizes from 26 to 22 AWG. With approvals from CSA and UL, this CONTACT is designed for power and signal connections in various assemblies.
828905-1
TE Connectivity 828905-1 CONTACT features CRIMP terminal type, 0.0866" min cable entry, and -40 to 130°C operating temp. Ideal for STRAIGHT mounting with 0 AWG wire size, it's used in various assembly applications.
927771-3
TE Connectivity's 927771-3 is a CRIMP terminal with stamped contact design. It has a wire gauge of 17 AWG, rated for 30A current. Ideal for power applications, it can accommodate cables from 0.055 to 0.09 inch and operates b/w -40 to 130°C.
AT62-14-0122
Amphenol
19200031440
Harting Electronics & Kg
HD30-24BT-BK
CONNECTOR ACCESSORY; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -29 Cel; Wire Gauge (AWG): 0; Material: POLYVINYLCHLORIDE; Maximum Wire Size: 0 AWG;
747784-8
TE Connectivity 747784-8 is a JACK SCREW for CABLE CONNECTORS. Made of STAINLESS STEEL, it supports up to 0 AWG wire size. Mounting options include #4-40 and SCREW, ideal for various assembly applications.
5748676-1
TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.
3030323
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; DIN Conformity: NO; Assembly Item Name: BLOCK; MIL Conformity: NO; IEC Conformity: NO;
SPAL-001T-P0.5
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
W3S-1939
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Design: POWER AND SIGNAL; Wire Gauge (AWG): 0; Maximum Operating Temperature: 125 Cel; Material: POLYBUTYLENE TEREPHTHALATE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
770253-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Minimum Cable Entry: .04 inch; MIL Conformity: NO; Mounting Style: STRAIGHT;
770-203
Wago
770250-2
CONNECTOR ACCESSORY; Rated Current: 19 A; Design: POWER; MIL Conformity: NO; Contact Design: LOOSE; DIN Conformity: NO;
770258-1
TE Connectivity's 770258-1 is a CRIMP terminal with 29.92 finish thickness, rated for 250V and 105°C. Ideal for SL-156 HOUSING applications, it supports wire gauge up to 18 AWG and rated current of 6.5A.
770248-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Rated AC Voltage: 600 V; Construction: STRANDED; Wire Gauge (AWG): 14;
770253-4
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; IEC Conformity: NO; Assembly Item Name: CONTACT; Rated AC Voltage: 600 V;
770249-3
TE Connectivity 770249-3 is a crimp terminal with approvals from CSA, UL, and VDE. It is designed for standard universal mate-n-lok applications with a rated voltage of 600V. Featuring stranded construction, it has a max operating temperature of 120°C and can accommodate wire sizes ranging from 20 AWG to 14 AWG.
770234-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; MIL Conformity: NO; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET;
770251-3
TE Connectivity 770251-3 is a crimp terminal with approvals from CSA, UL, and VDE. It is designed for standard universal mate-n-lok applications with a rated voltage of 600V. Featuring stranded construction, it has a wire gauge range of 14-20 AWG and can handle up to 7A current.
770233-1
CONNECTOR ACCESSORY; DIN Conformity: NO; Wire Gauge (AWG): 0; MIL Conformity: NO; Maximum Wire Size: 0 AWG; Approvals (V): UL;
770232-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; MIL Conformity: NO; Material: POLYESTER; Assembly Item Name: PROTECTIVE COVER;
770210-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Rated AC Voltage: 600 V; Approvals (V): CSA; UL; VDE; MIL Conformity: NO;
770211-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Contact Gender: FEMALE; Terminal Type: CRIMP; Rated DC Voltage: 600 V;
770246-3
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Maximum Cable Entry: .2 inch; Minimum Wire Size: 12 AWG; DIN Conformity: NO;
770247-3
TE Connectivity 770247-3 is a crimp terminal with approvals from CSA, UL, and VDE. It has a rated voltage of 600V and can handle temperatures from -55 to 120°C. Ideal for standard universal mate-n-lok applications with stranded construction and female contact gender.
770252-1
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 7 A; Cable Types: DISCRETE WIRE; Material: BRASS; Usage: STANDARD UNIVERSAL MATE-N-LOK;
770255-2
CONNECTOR ACCESSORY; Rated Current: 19 A; Maximum Cable Entry: .2 inch; Minimum Cable Entry: .13 inch; Contact Design: LOOSE; Rated AC Voltage: 600 V;
770254-2
CONNECTOR ACCESSORY; Rated Current: 19 A; Contact Design: LOOSE; Maximum Cable Entry: .13 inch; Rated AC Voltage: 600 V; Minimum Wire Size: 20 AWG;
770-204
770-214
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved