Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: PLATE ITEM; DIN Conformity: NO;
Median Price
$1.180
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Standard Electric Supply Co.
1+ parts
$0.800
100+ parts
-
1k+ parts
10k+ parts
TSI Solutions
$0.950
Misumi USA
$1.010
Heilind Electronics
Interstate Connecting
Newark
$1.520
$1.230
$1.170
DigiKey
$1.730
$1.250
$1.063
$0.996
Verical
$1.533
$1.347
$1.301
Master Electronics
$1.200
$1.130
$1.050
Distrelec
Element14
$1.750
$1.490
$1.380
Farnell
$0.397
$0.381
Bürklin Elektronik
$0.400
Kempston Controls
$0.340
Galco
$0.920
Powertech Controls
$1.030
Nova Conductors
$1.090
Quotebeam
$74.000
VNN
Shortec Electronics
IBS Electronics
$1.692
$1.593
$1.480
NAC Semi
$0.811
$0.737
Electro Sonic
$1.034
$0.983
Vyrian
Rapid Electronics
$0.495
Diverse Electronics
Omnical
Ampacity Inc.
Continental Prestige Electronics
$1.068
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Netroflash
$1.036
$1.014
Assembly Products 2002-1292 attributes and parameters. Explore more Assembly Products devices from Wago
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Data and energy flows are part of the infrastructure of the digital world. WAGO products ensure the long-term viability of this connectivity. We have always considered ourselves a reliable partner to the industry and are aware of the great responsibility we have as a leading supplier in the field of connection and automation technology. We face this challenge with passion and dedication and understand it as part of our entrepreneurial vision and mission.
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Vicor
1SNK900101R0000
Abb
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
77138-001LF
Amphenol Communications Solutions
Amphenol's 77138-001LF CONTACT features CRIMP terminals for 30-26 AWG wires. With a PHOSPHOR BRONZE build, it offers FEMALE gender and BELLOWED style for STRAIGHT mounting. Ideal for Assembly Products, this contact has an 8 finish thickness.
WP-2P
TE Connectivity's WP-2P is an Assembly Product designed for DTP SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. The material used is Polybutylene Terephthalate, making it suitable for POWER AND SIGNAL applications.
09330006102
Harting Electronics & Kg
09330006102 by Harting Electronics & Kg is a HAN E CONNECTOR with CRIMP terminals for 14 AWG wire. It has approvals for IEC 60664-1 and IEC 61984, rated at 16 A current with male contact gender. The CONTACT features copper alloy material, 1 mohm resistance, RND PIN-SKT style, and STRAIGHT mounting suitable for various assembly applications.
7816.6557.0
CONNECTOR ACCESSORY;
W2S-P012
TE Connectivity's W2S-P012 is a wedge item in the DT Series, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it ensures reliable performance in various assembly projects.
HDC26-24
TE Connectivity's HDC26-24, part of the HD SERIES, features a max operating temperature of 125°C and min of -55°C. With a max wire size of 0 AWG, it is a female contact assembly item made of plastic. Ideal for applications requiring durable connectors in extreme temperature conditions.
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
M80-0130005
Harwin Plc
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
1SET111003R0000
TE Connectivity 1SET111003R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 18 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it features a STRAIGHT mounting style.
963225-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
929974-1
TE Connectivity's 929974-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 40A current. Ideal for applications requiring 0.047-0.082 inch cable entry and operating temperatures b/w -40 to 130 °C.
12103881
Aptiv
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Maximum Cable Entry: .079 inch; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN;
66504-9
TE Connectivity 66504-9 is a CRIMP terminal with operating temperatures from -55 to 105 °C. It supports wire sizes ranging from 24 to 20 AWG and rated for 2A current. Ideal for SIGNAL applications requiring FEMALE contacts with 0.6 mm2 cross-section area.
2064600021
3025163
Phoenix Contact
The Phoenix Contact 3025163 is a steel CLAMPING ITEM with EN and IEC approvals. It has a min cable entry of 0.118" and max cable entry of 0.315". Ideal for securing cables in industrial applications using M4 mounting option.
5-965906-1
TE Connectivity's 5-965906-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 7.5 A. Ideal for applications requiring a female contact gender, it operates b/w -40 to 120 °C temperature range.
MINI-SSHL-002T-P0.2
J S T Mfg
MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2002-1492
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;
2002-404
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO;
2002-1293
TERMINAL BLOCK ACCESSORY;
2002-406
2002-407
2002-1392
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: PLATE ITEM; IEC Conformity: NO;
2002-1491
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END PLATE; DIN Conformity: NO;
2002-1892
2002-2291
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: PLATE ITEM; DIN Conformity: NO; MIL Conformity: NO;
2002-401
2002-3292
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLATE ITEM; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
2002-1291
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLATE ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
2002022
CONNECTOR ACCESSORY; DIN Conformity: NO; Approvals (V): GOST; MIL Conformity: NO; Assembly Item Name: COVER ITEM; IEC Conformity: NO;
2002-6392
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO;
2002-115
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: MARKING ITEM; DIN Conformity: NO; MIL Conformity: NO;
2002-2292
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: PLATE ITEM; MIL Conformity: NO;
2002-433
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER ITEM; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
2002-435
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO;
2002-1391
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: PLATE ITEM; IEC Conformity: NO; DIN Conformity: NO;
2002-400
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Usage: TERMINAL BLOCK; IEC Conformity: NO; Assembly Item Name: JUMPER ITEM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved